Salesforce DEX-450 Exam Prep
Programmatic Development using Apex and Visualforce in Lightning Experience (Page 44 )

• Matching hashes: The software is unchanged.
• Different hashes: The software was modified or corrupted.

• Encryption: Protects confidentiality.
• Baselines: Define approved configurations or normal performance.
• Tokenization: Replaces sensitive data with tokens.

• Internal interface ? connected toward the corporate network/internal firewall
• External interface ? connected toward the Internet-facing firewall

1. A route for the internal corporate network through the internal-facing interface/firewall.
2. A default route (0.0.0.0/0) through the Internet-facing interface/firewall.

• staff use the new system;
• transactions and reports are checked;
• problems are corrected;
• feedback is collected.

• Phased changeover: different parts or functions are introduced in stages, often according to a planned sequence.
• Pilot changeover: one representative department, branch or group acts as a test site before wider implementation.
• Parallel changeover: old and new systems operate at the same time.
• Direct changeover: the old system is stopped and the new one starts immediately.

• View/inspect configuration: Possible.
• Modify the installed application or its S-Controls: Typically restricted in a test-drive org.

• The explanation states that Traffic Analytics can be enabled by a user with one of these subscription-level roles:

• Question 34 — Network Contributor: Yes
• Question 35 — Owner: Yes
• Question 36 — Reader: Yes, according to the stated explanation and documentation

• Customize Opportunity Contact Role

• Add the Opportunity Contact Role related list to the Opportunity page layout

• Campaign Member Role relates contacts or leads to campaigns, not opportunities.
• Campaign Member related list would expose campaign participation, not the stakeholders for the opportunity.
• Customize Campaign Role also concerns campaigns.

• B — Reviewing the strategy: Usually performed by a security steering committee or other governance body.
• C — Communicating the strategy: The security manager may help communicate it, but communication is not the primary governance responsibility tested here.
• D — Approving the strategy: Approval belongs to executive management or the appropriate governing authority, not the person who develops it.

• B. Data loss prevention (DLP): Helps prevent sensitive data from being copied, emailed, or exfiltrated. It is not the primary control for protecting a stolen laptop’s stored data.
• C. Operating system hardening: Reduces vulnerabilities by disabling unnecessary services and applying secure settings, but it does not necessarily protect the files if the disk is accessed directly.
• D. Boot security: Helps ensure the device starts only through trusted software or approved processes. It supports platform integrity but does not itself encrypt stored files.

• SharePoint search: Finds documents based on search terms, but it does not reliably identify every 32-character account number for DLP enforcement.
• A hunting query in Microsoft 365 Defender: Used for security investigations, not for defining sensitive content in a DLP policy.
• Azure Information Protection: Uses classification and labeling; it does not automatically identify this specific account-number pattern unless configured with a matching sensitive information type.
• RegEx pattern matching: Best suited for structured identifiers with a known format, such as account numbers, employee IDs, or policy numbers.

• Accept: Acknowledge the risk and choose not to take additional action.
• Transfer: Shift the risk or its financial impact to another party, such as through insurance or outsourcing.
• Mitigate: Reduce the likelihood or impact of the risk, such as by implementing security controls.
• Avoid: Eliminate the activity or condition that creates the risk.

• GPU: A failure may cause no video output, but the PC usually still powers on.
• RAM: Can prevent booting or produce error beeps, but fans and power indicators generally work.
• CPU: Can prevent startup or booting, but it usually does not cause a completely lifeless system.

• Workspace: Stores notebooks, libraries, jobs, and other project resources.
• Notebooks: Interactive documents containing code, queries, visualizations, and explanations. Common languages include Python, SQL, Scala, and R.
• Clusters: Groups of virtual machines that run Spark workloads. Clusters can be started, stopped, and automatically scaled.
• Data access: Databricks can read from services such as Azure Data Lake Storage, Azure Blob Storage, and Azure SQL.
• Jobs: Automate notebooks or data-processing workflows on a schedule or in response to events.

sql 
CREATE PROCEDURE dbo.usp_CreateOrder 
AS 
BEGIN 
    SET NOCOUNT ON; 
    SET XACT_ABORT ON; 


    BEGIN TRY 
        BEGIN TRANSACTION; 


        INSERT INTO dbo.Orders (/ columns /) 
        VALUES (/ values /); 


        SET @OrderID = SCOPE_IDENTITY(); 


        COMMIT TRANSACTION; 
    END TRY 
    BEGIN CATCH 
        IF @@TRANCOUNT > 0 
            ROLLBACK TRANSACTION; 


        THROW; 
    END CATCH; 
END;

• BEGIN TRY contains the transactional work.
• SCOPE_IDENTITY() retrieves the identity generated by the INSERT; it belongs after the insert, not as the error-handling logic.
• COMMIT runs only if all statements succeed.
• BEGIN CATCH handles failures.
• IF @@TRANCOUNT > 0 prevents attempting a rollback when no transaction is active.
• ROLLBACK undoes partial changes.
• THROW re-raises the original error with consistent details for the application.
• SET XACT_ABORT ON ensures many run-time errors automatically terminate and roll back the transaction.

• Restarting the device: may fix software problems, but not a directional connection issue.
• Swollen battery: is a safety concern, but would not typically cause recognition only in one orientation.
• Failing cable: possible in general, but less likely because it works on other similar devices.
• Dirty or damaged port: best matches the symptoms. Inspect and carefully clean the port, or have it serviced if damaged.

• Import mode loads the data into the Power BI model. Visuals query the in-memory model, which generally provides faster calculation and rendering than DirectQuery.
• Import mode also minimizes online processing because report interactions do not send queries back to the dataflow or SQL Server.
• A daily refresh can load data through the previous day, satisfying the freshness requirement without unnecessary hourly processing.

• DirectQuery keeps querying the data source or dataflow during report use, increasing online processing and potentially slowing visuals.
• Adding a gateway enables connectivity for on-premises sources, but it does not remove the performance disadvantages of DirectQuery.
• An hourly Power Automate refresh is unnecessary when the requirement is only data through the previous day and creates additional processing overhead.

• A: Reduce management overhead — This is generally an advantage of public cloud, not hybrid cloud. Hybrid environments can increase management complexity.
• B: Cross-platform virtualization — Not the defining advantage of hybrid cloud.
• D: Leverage IaaS and PaaS — Public clouds commonly provide both IaaS and PaaS, so this is not unique to hybrid cloud.

• A Layer 2 switch checks the destination MAC address in its MAC address table (CAM table).
• If the destination MAC is unknown, the switch cannot select a specific outgoing port.
• It therefore performs unknown-unicast flooding, sending the frame out every other port in that VLAN.
• The frame is not sent back through the port where it arrived.

• Forecasting lets sales leaders predict revenue for upcoming fiscal periods, compare forecasts with targets, and review performance by salesperson or team.
• Opportunity Stages help determine the likelihood that opportunities will close. Each stage can have a probability, which contributes to forecast calculations.

• Sales Quotes: Used to present pricing or product proposals to customers; they do not provide revenue forecasting.
• Opportunity List View: Helps users filter and view opportunities, but it is not the forecasting tool.

• Tactics: The attacker’s overall goal, such as gaining persistence or exfiltrating data
• Techniques: The methods used to achieve that goal
• Procedures: The specific implementation or sequence of actions

• IP addresses and hash values: Useful indicators, but they can change quickly.
• Indicators of compromise: TTPs may help identify IOCs, but their main value is describing behavior.
• Tools: Attackers can replace tools or use legitimate administrative utilities.

• Leaf switches provide access ports for servers, endpoints, and other devices.
• Spine switches form the fabric’s backbone.
• Every leaf connects to every spine, creating a predictable, high-bandwidth, low-latency path.

• A: Adding both a spine and leaf is unnecessary for simply adding access ports.
• B: Adding a spine does not directly provide endpoint access ports.
• D: A single connection to one spine creates a bottleneck and a single point of failure.

• Microsoft 365 groups can contain users, but generally can’t contain other groups as members.
• Security groups can contain users and, where supported, other security groups.
• Distribution groups have different nesting restrictions and aren’t equivalent to security groups.
• Dynamic groups can’t be manually populated with members; their membership is calculated from rules.
• A group’s membership type (Assigned or Dynamic) and group type determine whether it can be added to another group.

• If the Facebook user is new, Salesforce invokes createUser.
• If the user already exists, Salesforce can invoke updateUser.
• The handler can read the latest data from Facebook, such as name, email, or other profile attributes, and update the corresponding Salesforce user.

• B: A scheduled job is unnecessary and would not provide real-time synchronization during authentication.
• C: A Facebook signed request is not the standard mechanism for updating Salesforce user records in this authentication-provider setup.
• D: SAML Just-in-Time provisioning applies to SAML identity providers, not Facebook OAuth authentication.

• Generates a syslog message
• Shuts down the PoE port
• Places the port into error-disabled (err-disabled) state
• Frees the power allocation

• A device starting to draw power does not necessarily generate a syslog message.
• Monitoring does not pause data traffic while checking power.
• Drawing less than the configured minimum does not automatically mean the device has failed and should be disconnected.

• tag=Priv searches the tag field for values beginning with Priv. The wildcard can match the remaining characters, so it matches Privileged.
• tag=Priv would search for the exact tag Priv, not Privileged.
• tag=priv* uses lowercase priv; tag matching is treated as case-sensitive here, so it may not match the tag Privileged.
• tag=privileged uses the wrong capitalization for the exact tag.

• vBond — orchestration plane: Authenticates devices, helps them discover each other, and assists with NAT traversal and initial control-connection setup.
• vSmart — control plane: Distributes routing and policy information to WAN Edge devices using the overlay control plane.
• vManage — management plane: Provides centralized configuration, monitoring, and orchestration through its GUI/API.
• WAN Edge — data plane: Forwards user traffic across the SD-WAN fabric.

• The inference container image or built-in algorithm
• The location of model artifacts in Amazon S3
• IAM permissions through the execution role
• Optional environment variables and networking settings

1. Create AWS::SageMaker::Model
2. Create an AWS::SageMaker::EndpointConfig that references the model
3. Create AWS::SageMaker::Endpoint that references the endpoint configuration

• AWS::SageMaker::Endpoint hosts a model but does not define the model itself.
• AWS::SageMaker::NotebookInstance provides a development environment.
• AWS::SageMaker::Pipeline orchestrates ML workflow steps.

• Compensating control: The server is end-of-life, so it may no longer receive security patches or support. Placing it on a restricted VLAN provides an alternative layer of protection by reducing who can access it and limiting its exposure.
• Technical control: VLAN segmentation and access control lists (ACLs) are technology-based mechanisms that enforce network access restrictions automatically.

• Managerial: Policies, procedures, and governance—not network configuration.
• Physical: Locks, guards, or barriers.
• Corrective: Restores systems after an incident.
• Detective: Identifies suspicious activity rather than restricting access.
• Deterrent: Discourages behavior but does not enforce access rules.

• Amazon DynamoDB — Managed NoSQL database, not PostgreSQL.
• Amazon Athena — Serverless service for querying data in S3; intended for analytics, not OLTP.
• Amazon EMR — Managed cluster platform for big-data frameworks such as Hadoop and Spark.

• A: Security groups do not control traffic to an S3 gateway endpoint in this way. Gateway endpoints are configured through route tables.
• B: An S3 bucket policy may be needed for authorization, but the error specifically indicates a connectivity or endpoint-routing problem.
• C: Glue connection settings do not require a fully qualified domain name to resolve this endpoint issue.

• Replace the keyboard: More expensive and unnecessary before simpler causes are ruled out.
• Replace the key switch: Laptop keyboards generally aren’t designed for individual switch replacement.
• Replace the circuit board: Excessive for a single nonworking key and not a cost-effective first step.

• Accept: Acknowledging the risk without taking additional action.
• Transfer: Shifting responsibility or financial impact to another party, such as through insurance or outsourcing.
• Mitigate: Reducing the likelihood or impact of the risk through controls.
• Avoid: Eliminating the activity or condition that creates the risk.

1. Define Power Platform DLP policies

1. Add custom prompt modifications

1. Conduct adversarial testing

• Define the contractor’s deliverables, responsibilities, acceptance criteria, and deadlines.
• Agree on a reporting cadence to monitor progress.
• Allow the local company to use its expertise and manage its own work.

• A: “Under the supervision of the project manager” suggests excessive direct control and is less empowering.
• B: Micromanaging prevents the contractor from functioning independently and is inefficient.
• D: Deploying the contractor’s staff under the PM’s supervision creates a staffing/control arrangement rather than empowering the contracted company.

Simple explanation

• The Azure VPN gateway to connect to
• Authentication settings
• Routes for networks that the client can access

• netstat: Shows local network connections and listening ports, but not which WAN path carries the traffic.
• nslookup: Resolves domain names to IP addresses.
• ping: Tests reachability and latency but does not show the route.

• A: Daily involvement is unnecessary and may not solve the availability problem.
• C: Clarifying all requirements at the start conflicts with agile’s iterative refinement.
• D: Simply reviewing based on availability leaves the problem unresolved and allows rework to continue.

• A — Add a Path for Stage: A Path lets users update the Opportunity’s Stage directly from the record page, without opening the full edit form. It can also display guidance and key fields.
• B — Use a Kanban list view: Users can move Opportunities between stages by dragging records between columns, which is ideal when Stage is the only field they normally change.

• Customer: Dual
• Date: Dual
• Sales: DirectQuery
• SalesAggregate: Import

• Sales – DirectQuery: Near-real-time data should not rely on an imported cache. DirectQuery sends queries to the source when visuals are loaded, allowing recent sales data to appear.
• SalesAggregate – Import: A weekly refresh is sufficient, and imported data generally gives faster visual performance because it is stored in Power BI’s in-memory cache.
• Customer and Date – Dual: These are dimension tables used with both the DirectQuery Sales table and the imported SalesAggregate table. Dual allows Power BI to use cached data when possible, while still behaving appropriately in queries involving DirectQuery data. This can improve performance and reduce unnecessary limited relationships.

• Elicited and documented customer requirements
• Converted them into clear, measurable specifications
• Validated the requirements with the customer
• Used them as the basis for design, quality checks, and acceptance

• A: Requirements should reflect the customer’s needs—not the supplier’s standards.
• B: Iteration review planning does not replace proper requirements collection.
• D: A retrospective occurs after work is completed and is mainly for process improvement, not initial requirements definition.

• Multiple nodes: Data is replicated several times in the primary region.
• Separate geography: A copy is asynchronously replicated to a secondary Azure region.
• Readable secondary: RA-GRS provides read-only access to the secondary replica, even when the primary region is available.

• GRS: Replicates to another region but the secondary copy isn’t normally readable.
• ZRS: Replicates across availability zones in the same region, not a separate geographic region.
• LRS: Keeps replicas within a single datacenter or region and provides no geographic redundancy.

1. Get Data ? Folder in Power BI Desktop.
2. In Power Query Editor, expand the Attributes column to expose metadata such as hidden status and other file attributes.
3. Remove the Content column (and any other data columns you do not need).

• Name
• Extension
• Date accessed
• Date modified
• Folder Path
• Attributes
• Content

Why

cmd 
PowerShell.exe -ExecutionPolicy Bypass -File C:\Scripts\ConfigureVM.ps1

Why the other options are less suitable

• GPO logon script: Runs only when a user logs on and may not run during initial VM provisioning.
• GPO startup script: Can work, but requires the VM to be joined to the domain and the policy to be applied. It is also normally evaluated at each startup.
• Place scripts in a VHD: Merely placing scripts on a disk does not cause them to execute.

• Detect risky sign-ins from unfamiliar or unidentified IP addresses
• Evaluate user or sign-in risk
• Automatically require a password change because of a risky sign-in

• User risk policy: Can require a user to securely change their password when the account may be compromised.
• Sign-in risk policy: Can require MFA or block access based on the risk of a particular sign-in.

• Users logging in more frequently than average
• Logins occurring during non-business hours
• Patterns that may indicate compromised credentials or suspicious access

• Login History: Shows individual login attempts and basic details, but does not provide behavioral analysis or averages.
• Login Inspector: Used to troubleshoot or inspect a specific login attempt, rather than analyze organization-wide patterns.
• Login Report: May provide reportable login information, but it is not the specialized tool for forensic behavioral analysis.

• SQL injection
• Cross-site scripting (XSS)
• Malicious file uploads
• Common web-application exploits

• Layer 4 firewall: Filters primarily by IP addresses, ports, and transport protocols; it lacks detailed web-application inspection.
• NGFW: Provides advanced network filtering and may include application awareness, but a WAF is more specialized for protecting web applications.
• UTM: Combines several security functions in one device, but it is not specifically focused on web-application attacks.

• Approve major information security policies
• Allocate funding and resources
• Set the organization’s risk appetite
• Ensure security supports business objectives

• Evaluating vendors is generally handled by security, procurement, or technical teams.
• Assessing risks is typically performed by security and risk-management professionals, with management accepting or prioritizing the risks.
• Monitoring regulatory adherence is usually handled by compliance, audit, or security functions.

• B — Single customer login across properties: Customer 360 Identity provides centralized identity services, allowing an organization to recognize a customer across multiple digital properties and applications. This helps UC understand authenticated activity as part of a broader customer identity.

• C — Multi-brand support: Customer 360 Identity can support multiple brands and user experiences. Identity services can remain centralized while correlating a customer’s activity across different corporate brands or channels.

• A: Customer 360 Identity does not automatically populate all data into Customer 360 Data Manager and Customer 360 Audiences. Integration and data configuration are still required.
• D: Tracking anonymous activity and linking it after sign-up may be possible through broader customer-data and tracking implementations, but it is not the primary Customer 360 Identity benefit tested here. Identity focuses mainly on authentication, registration, and cross-property identity correlation.

• A valid input returns the expected result
• An invalid input raises an error
• Boundary values are handled correctly

• B: Copilot may help generate tests, but it does not automatically write all necessary tests.
• C: Writing the implementation does not verify that it works correctly.
• D: Copilot can suggest test commands or test code, but the developer or development environment must execute and validate the tests.

• Identifying the communication strategy: Usually part of a business continuity or incident response plan.
• Evaluating the risk management plan: Part of risk assessment and risk management activities.
• Establishing backup and recovery procedures: Usually part of disaster recovery planning.
• Developing the incident response plan: Part of incident response planning.

• Due Date
• Order Date
• Delivery Date

DAX 
Order Date = 'Due Date' 
Delivery Date = 'Due Date'

• Due Date[Date] ? Sales[Due Date]
• Order Date[Date] ? Sales[Order Date]
• Delivery Date[Date] ? Sales[Delivery Date]