SAP C_ARP2P_2404 Exam Actual Questions
SAP Certified Associate - Implementation Consultant - SAP Ariba Procurement (Page 6 )

• Answer: A) Clear the Windows event logs

• Windows event logs (System, Security, Application) are key forensic artifacts. If an attacker clears these logs, there’s no built-in local record of actions taken, making it harder for investigators to trace what happened.

• Modify the system time: may misalign timestamps but does not erase past events and can be easily detected.
• Alter log permissions: could prevent new log entries, but it doesn’t remove existing ones and can raise alarms due to permission changes.
• Reduce log retention settings: affects only future logs; it doesn’t wipe already recorded activity.

• In real environments, defenders mitigate this risk with tamper-evident, centralized logging (remote SIEM, write-once storage, log integrity checks) to preserve evidence even if a host is compromised.

• Two VMs
• Distributed across two separate availability zones

• Version control provides a single source of truth for metadata changes and tracks every modification.
• It supports branching and merging, so each feature can be developed in isolation and later merged without overwriting others.
• It allows diffs and conflict resolution, making it easier to manage dependencies across features and ensure a stable release.

• Setup Audit Trail: only logs who/change when something happened; it doesn’t prevent overwriting or manage cross-feature dependencies.
• Change Sets: used to deploy changes between orgs, not to coordinate parallel development or prevent conflicts across ongoing sprints.

• IPv6 address types:

• The block FF00::/12 is a subset of the multicast space, so it represents multicast addresses.
• Therefore, this block forwards packets to a multicast address (to multiple receivers) rather than to a single unicast address.
• The other prefixes are unicast and would deliver to a single interface.

• Correct answer: A: The ITIL service value system (SVS).

• The SVS explains how all components (governance, the service value chain, practices, guiding principles, information and technology, partners and resources, and continual improvement) work together to enable value creation from demand to outcomes.

• B: The ITIL guiding principles describe aspirational guidance for decision-making, not how all components/activities interact.
• C: The four dimensions of service management explain areas to consider (organizations/people, information/technology, partners/suppliers, value streams/processes) but don’t describe the integrated system itself.
• D: A service relationship defines the relationship between provider and consumer, not the overall system of components and activities creating value.

• The correct answer is Mass Transfer Tool.

• The Mass Transfer Records tool is Salesforce’s built-in way to reassign ownership of existing records in bulk. In this scenario, you need to transfer ownership of the departed rep’s accounts and opportunities to a new rep while keeping the team structure intact.

• Go to Setup > Data Management > Mass Transfer Records.
• Choose the object: Accounts (and then Opportunities, if needed).
• Set “Transfer From” (the leaving rep) and “Transfer To” (the new rep).
• Decide whether to transfer related records as well (e.g., opportunities tied to accounts) and proceed.
• Review and confirm.

• Data Loader / Data Import Wizard are for bulk import/export, not bulk reassigning ownership.
• Dataloader.io is a third-party tool; the built-in Mass Transfer tool is the standard Salesforce method for this task.

• Ablauf: Er wird in der gleichen Transaktion ausgeführt, bei der z. B. ein Datensatz erstellt oder aktualisiert wird. Der Benutzer wartet, bis der Workflow abgeschlossen ist.
• Stufen: Kann vor dem Vorgang (pre-operation) oder nach dem Vorgang (post-operation) laufen.
• Zweck: Sofortige Validierung oder Anpassung von Daten, ggf. auch das Verhindern eines Vorgangs, wenn Bedingungen nicht erfüllt sind.

• Automatisierte Flows (Power Automate, automatisierte/ Background Flows) laufen asynchron im Hintergrund, nachdem der Trigger erkannt wurde, und blockieren den Benutzer nicht.

• Correct answer: B) Context window.

• Why: The context window is the number of tokens the foundation model can process in a single inference. It sets the maximum length of the combined input (prompt) and the model’s output. A larger context window allows more content to be included in one prompt.

• How to use: Check the FM’s context window value and ensure your prompt length plus the desired completion stays within that limit. If needed, summarize or split input across multiple prompts.

• Why the other options aren’t correct:

• Quick tip: Verify the specific FM’s context window for Bedrock, since different models have different token limits.

• Correct answer: S3 Versioning

• Why the other options aren’t suitable for this protection:

• Quick tip: For enhanced protection, enable Versioning (and consider related features like Object Lock for write-once scenarios in specific compliance cases).

• Shadow IT describes employees using unsanctioned tools or methods to access systems, often without IT oversight (e.g., bypassing the VPN).
• Not A (Espionage): this implies external covert actors; here the activity is internal.
• Not B (Data exfiltration): there’s no explicit data transfer shown, just bypassing the VPN.
• Not C (Nation-state attack): this involves external political/strategic actors; not the internal behavior described.

• Implement policy and training to enforce approved tools.
• Use IAM, VPN enforcement, and network access controls to ensure only sanctioned access.
• Monitor for unsanctioned tools and provide secure, approved alternatives.

• Review the risk register.
• Use the previously defined risk response plan, such as assigning a backup resource, reprioritizing work, or using another qualified engineer.
• Implement the response promptly because the task is on the critical path.

• B: Revising the schedule without first applying the planned response may be premature.
• C: Excluding a required task could compromise the project’s objectives and requirements.
• D: Updating the risk and lessons learned records is appropriate, but it should happen after managing the immediate issue, not as the next primary action.

• Drop violating frames
• Log or alert on the violation
• Shut down or restrict the port

• Load balancer: Distributes application traffic; it does not control switch MAC learning.
• IPS: May detect some network attacks but is not the primary control for switch MAC-table exhaustion.
• NGFW: Protects traffic crossing network boundaries, while MAC flooding occurs at the switching/LAN layer.

• ?????? CPU
• ?????????????????
• ??????????????????????????
• ???????????? throughput
• ??????????????????????????????

• A ??????? system software ????????????????????????????????? ??????????????????????????????????
• B ?????????????????????????? ????????????????????????? ?????????????????????????????
• D ????????????????????????? ?????????????? ?????????????????????????????????????????

• Startup scripts run at computer startup, before any user logs on, making them ideal for machine-wide configuration on each new VM.
• They execute under the Local System account, which is appropriate for initial setup tasks.
• Linking a GPO to the OU ensures every new VM in that domain automatically receives the configuration—great for scalability.

• A) SetupComplete.cmd runs only once, right after Windows Setup, not on every boot, so it isn’t ideal for provisioning multiple VMs consistently.
• B) Logon scripts run per user, not per machine, so they aren’t reliable for initial VM configuration before a user signs in.
• D) Placing scripts in a VHD doesn’t automatically execute them.

Why B works

• AWS KMS keys are Regional resources. A normal customer managed key in Region A cannot be used directly in Region B.
• A customer managed multi-Region KMS key (MRK) has related key replicas in both Regions. The replicas share key material and key ID, although each has a Regional ARN.
• With client-side encryption, the application encrypts the data before storing it in S3. Cross-Region replication then copies already-encrypted objects, so S3 does not need to decrypt and re-encrypt them with a different Regional key.

Why the other choices are weaker

• A and C: SSE-S3 uses Amazon-managed S3 keys, not the required customer managed KMS key.
• D: SSE-KMS can work only if the solution creates and configures the appropriate KMS key or multi-Region key replica in each Region. As written, it says to create a customer managed KMS key in each Region, which implies separate keys—not the same KMS key. Replication also requires additional KMS permissions and destination encryption configuration.

• According to the provided answer key, the four options are: Upload File, User Criteria, HR Profiles, HR Criteria (options B, D, F, G).

• Upload File: Filter by a file you upload (e.g., CSV) that provides data for bulk case creation.
• User Criteria: Filter by criteria related to users (e.g., role, department) to select target users.
• HR Profiles: Filter by HR profile data associated with users.
• HR Criteria: Filter by HR-related criteria or attributes.

• S3 Lifecycle rules automate actions such as transitioning objects to different storage classes or deleting old objects.
• S3 bucket policies control access permissions; they do not preserve earlier object versions.
• S3 server-side encryption protects data confidentiality by encrypting objects at rest, but it does not prevent deletion or overwriting.

• Accidental deletion or overwriting ? S3 Versioning
• Unauthorized access ? bucket policies and IAM
• Data encryption ? server-side encryption

• IPsec: Protects traffic at the network layer, commonly for VPNs; it is not WPA2’s authentication protocol.
• SSL: Protects specific application sessions and has largely been replaced by TLS.
• SSH: Secures remote command-line administration.

• Leadership and stakeholder commitment
• Business capability and skills
• Organizational culture
• Availability of resources
• Ability to manage and sustain change
• Impact of the proposed transformation

• How ready the organization is
• Which areas require urgent attention
• How difficult each issue may be to resolve
• Risks that could affect implementation

• A: Places the assessment in Phase B and refers vaguely to creating views; this is not the prescribed technique.
• B: An Implementation Factor Assessment and Deduction Matrix is not the primary TOGAF technique described for business transformation readiness.
• D: A Business Scenario helps identify requirements and stakeholder concerns, but it is not the main technique for assessing organizational readiness.

• Correct choice: Box 1 = Yes, Box 2 = Yes, Box 3 = No (Answer: A)

• Box 1: Yes – Microsoft Purview Compliance Manager provides a risk-based compliance score that helps you understand your overall compliance posture. The score reflects how well you’re meeting regulatory requirements and internal policies.
• Box 2: Yes – It also offers step-by-step remediation guidance through actionable “improvement actions.” These guide you to implement fixes and align controls, often with links to the relevant consoles.
• Box 3: No – Compliance Manager is not part of Microsoft Defender. It is part of Microsoft Purview. Defender is a separate security product family, while Compliance Manager is in Purview for compliance risk and remediation.

• Use Purview Compliance Manager to view your compliance score and follow improvement actions.
• Improvement actions provide actionable steps and guidance for remediation.
• Defender and Purview are distinct services; do not confuse their scopes.

• The correct answer: B) Synthetic identity theft.

• Synthetic identity theft involves creating a new, forged identity by combining information from multiple real people (e.g., names, dates of birth, SSNs) to commit fraud.
• In the scenario, Adam “created a new identity by obtaining information from different victims,” which matches the idea of synthesizing data to form a fake person.

• Medical identity theft: using someone’s medical information to obtain care or services.
• Tax identity theft: using someone’s personal info to file fraudulent tax returns.
• Social identity theft: impersonating someone to deceive others socially or publicly.

• Look for phrases like “create a new identity” or “combine information from multiple people” to identify synthetic identity theft.

• Incidents & alerts — see how the phishing activity was detected, correlated, and investigated.
• Threat Explorer — search for the malicious messages, recipients, URLs, attachments, and campaign activity.
• Email and collaboration reports — assess how many users or messages were affected.
• Remediation details — verify whether messages were quarantined, removed, or otherwise contained.

• Microsoft 365 admin center — general tenant administration.
• Microsoft Entra admin center — identity and access management.
• Exchange admin center — mail-flow and Exchange configuration, rather than full phishing-incident investigation.

• A? ??? Aurora Replicas? ?? ??? ???? ?? ???, ?? ???? Network Load Balancer(NLB)? ??????. NLB? ?? 4 ?? ???? HTTP ??? ?? ???(Sticky sessions)? ????? ???? ????.
• ??? ?? ??????? ?? ?? ???? ??? ???? ?? ????? ????? ?? ?? ???(?? ?/??? ??)? ?????. ? ??? ALB?? ?? ????, NLB?? ???? ?????.
• ??? ??? ??? ??? ???? ?? ???? ???? HTTP ???? ??? ALB? ???? ???. A? ? ??? ??????.

• VPC: A logically isolated virtual network in a cloud environment; it describes networking, not shared application access.
• NFV: Replaces dedicated network appliances with virtualized network functions.
• SaaS: A cloud service model in which users consume an application without managing its infrastructure. It could describe how the application is delivered, but the question emphasizes serving multiple user groups, which points to multitenancy.

• Ethical red-teaming is adversarial testing aimed at uncovering weaknesses and potential exploits in an AI system before deployment.
• A (improving accuracy) is not the primary?? of red-teaming.
• B (simulate model risk scenarios) is related but narrower; red-teaming centers on finding vulnerabilities and risk exposure, not just simulating risks.
• D (ensure compliance) is not the main goal of red-teaming.

• Goal: Identify the host that originated the infection, then label each remaining host as infected or clean based on log evidence.

• Logs to review (across hosts and firewall):

• How to identify the origin:

• How to classify other hosts:

• Quick tip: use the Reset All option if you want to re-run the scenario and practice again.

• User1 can sign in because the account is cloud-only. It does not depend on the on-premises domain.
• User3 can sign in because the account uses Password Hash Synchronization (PHS). Azure AD has a synchronized password hash and can validate the sign-in even when connectivity to on-premises Active Directory is unavailable.
• User2 cannot sign in because the account relies on Pass-through Authentication (PTA). PTA sends the authentication request to an on-premises PTA agent, which must contact a domain controller. With the internet connection from on-premises lost, that validation cannot occur.

• What the goal is: You want to add guest (external) users to your Azure AD tenant contoso.com, one entry per external user in a CSV.

• The proposed solution uses New-AzureADUser for each external user. Why this isn’t correct: New-AzureADUser creates a regular (internal) user in your directory. It does not create a guest/B2B user invite. So you’d end up with 500 ordinary accounts, not guest accounts with external access.

• The correct approach: Use New-AzureADMSInvitation for each external user. This invites the external user to your directory and creates a guest user (a B2B collaboration user) in your tenant. The invited user then accepts the invitation and gains access as a guest.

• Azure AD vs directory/tenant: Azure AD is the cloud identity service. A directory (also called a tenant) is your specific instance of that service (contoso.com in your scenario). The terms are often used interchangeably in exams.
• Guest user vs internal user: A guest user is external to your organization; an internal user is created directly in your directory as a normal employee/user account.
• B2B invitation: The process of inviting external users so they can collaborate in your resources; New-AzureADMSInvitation is designed for this.

• A. Implement retries with exponential backoff

• C. Reduce the frequency and/or size of requests

• B. Use PutRecord instead of PutRecords — PutRecord sends one record per call and does not remove the underlying throughput limitation. It may increase request overhead.
• D. Use Amazon SNS instead — SNS is not a direct fix for Kinesis shard throttling and changes the required streaming architecture.
• E. Reduce KCL consumers — KCL consumers read from Kinesis; they do not solve producer-side PutRecords throttling.

• Context: You’re configuring a Windows Autopilot deployment profile (Profile1) for Windows 11 devices. The hotspot asks you to pick the correct behavior for two statements based on the profile’s settings.

• Box 1: “can modify the desktop settings only for themselves”

• Box 2: “Cortana settings” with options like computer name, keyboard layout, etc.

• The diagnostic output shows that the protocol is TCP (proto=6) and the session state is 2.
• In FortiGate’s session output, state=2 maps to SYN_SENT. This means the TCP SYN has been sent but the handshake hasn’t completed yet.
• Therefore, the session is not ESTABLISHED, FIN/ACK-related states, or other states; it’s in SYN_SENT.

• Batch processing, such as scheduled data transformations
• Streaming processing, such as continuously ingesting events

• Manipulating data with multiple languages: Mainly a benefit of Databricks and Spark.
• Real-time notebook collaboration: A workspace/notebook feature.
• Alerts for query failures: A Databricks SQL or job-monitoring feature.
• Distributing complex operations: Primarily a Spark compute capability.

• Why this is correct: In Azure Virtual Desktop, user access to a host pool is controlled through App Groups. The default app group for a host pool publishes the full desktop, so adding members to that app group grants them sign-in and access to the desktop (and any RemoteApps in that group). This is the standard way to give users access to AVD resources.

• Why the other options are not correct:

• Practical steps (high level):

• The target API uses HTTPS, so Mule must validate the server’s TLS certificate.
• The TLS configuration is set to None, meaning no custom truststore is configured.
• Mule therefore uses the JRE’s default truststore to determine whether the target certificate is trusted.
• If the issuing CA certificate is in that truststore, the TLS handshake can succeed.
• If it is absent—or the certificate is otherwise invalid—the request fails with a TLS/handshake error.

• Correct answer: C — The model is deployed at UK border checkpoints.

• The EU AI Act applies to AI systems used within the EU or by entities established in the EU. So:

• What it says: you can add a cost when you adjust inventory, and that cost is posted automatically to a specific GL account.
• Reality: yes, you can adjust both quantity and value via an inventory adjustment journal. The cost on the journal line affects the inventory value.

• The general ledger postings are not arbitrary. the actual accounts used are determined by your item posting group and the system’s posting definitions. In practice, the adjustment debits/credits the appropriate inventory-related accounts (e.g., Inventory asset and a related offset such as an adjustment or COGS account) based on configuration.
• So, the cost change does not go to a single “manual” GL account you pick per line unless your posting setup maps to that account.

• The concept is true (you can adjust cost and have GL impact), but the claim that it posts to a single, specific GL account is oversimplified—the accounts come from your posting configuration.

• A Storage Gateway File Gateway provides an on-premises NFS/SMB file share that's backed by objects in S3. This is exactly what you need to migrate an NFS workload: applications continue using NFS, while the actual data moves to and is stored in S3.
• It can cache frequently accessed data locally for performance, while uploads go to an S3 bucket.
• Why the other options aren’t suitable:

• Answer: A

• Reason: The Standard web tier is the lowest tier that provides dedicated compute, built-in load balancing across instances, and sufficient storage to host multiple apps with custom domains. Basic may lack the required scalability/storage, while Free/Shared do not offer dedicated compute or proper load balancing.

• Answer: False. Agents and managers CAN create knowledge articles from Community questions.

• Why: In ServiceNow, a Community question can be converted into a Knowledge article using the Create Knowledge (or Convert to Knowledge) action. This allows what customers asked to become a reusable article for others.

• How it works (high level):

• Permissions: This ability depends on having the right roles/permissions (e.g., agents or knowledge managers). If you don’t see the option, check your role assignments or the knowledge-management configuration.

• Quick take: If a question in Community is valuable for others, a trained agent can turn it into a Knowledge article, making it available for self-service.

• Multiple AWS accounts: Create a separate account for each department or workload. This provides clear isolation and makes it easier to track each department’s usage and costs for chargeback.
• Consolidated billing: AWS Organizations can combine billing for multiple accounts into one central payer account. The company can still view costs by account while managing payment centrally.

• Placement groups: Control how EC2 instances are physically placed for networking or performance; they do not provide departmental billing separation.
• Edge locations: Infrastructure used by services such as Amazon CloudFront; unrelated to chargeback.
• AWS Config: Records and evaluates resource configurations and compliance; it is not a billing-separation mechanism.

• Answer: D. Select an IdP

• Why: To reduce the number of credentials across multiple SaaS apps, implement a single sign-on approach via an Identity Provider. The first step is choosing the IdP; once selected, you can enable SAML (A) or OAuth as supported by apps. Password vaulting (C) is not a true SSO solution, and B is not the foundational step.

• The correct option is A: Data architecture.

• Why: In the AWS CAF, the Platform perspective covers the technical foundation and architecture that enable cloud workloads to run reliably and efficiently. This includes how data is modeled, stored, and accessed across the enterprise—the core of data architecture.

• Quick mapping for the other options:

• Correct answer: B — A reservation for the server based on the MAC address.

• Why this is the best choice:

• Why the other options are less suitable:

• Quick takeaway: Use a DHCP reservation to give the file server a fixed IP while still benefiting from centralized DHCP management.

• Goal: Guests should not use cameras, but company users can.
• Correct configuration: Guest access settings in the Org-wide settings.

• External access: Controls external-domain communication, not guest capabilities inside Teams.
• Teams settings in Org-wide settings: Too generic; doesn’t specifically target guest capabilities.
• Audio & Video in the default Meeting Policy: Would affect everyone assigned to that policy. To meet the requirement without impacting internal users, you’d need separate policies or guest-specific settings; the exam focuses on the guest-access policy.

• Correct answer: Day 3 (Option B)

• Why: In Engagement Studio, when the program is paused, the prospects’ wait times are also paused and do not count down. They resume from the same point when the program restarts. Here, the prospect was at day 3 of a 5-day wait when paused, so they resume on day 3 after the 1-day pause.

• A. Custom and standard objects have standard fields. True. Both object types include standard fields (for example, CreatedDate, LastModifiedDate, Owner). Custom objects also have the Name field, which is a standard field on all objects.
• B. Standard objects are included with Salesforce. True. Standard objects (like Account, Contact, etc.) come with Salesforce out of the box.
• C. A new standard object can be created. False. You can create custom objects, but you cannot create new standard objects.
• D. Only standard objects support master-detail relationships. False. Master-detail relationships can be used with both standard and custom objects.

• A) MTU mismatch: OSPF neighbors must exchange Hello packets with a compatible MTU. If MTUs differ, the neighbor conversation fails and the adjacency cannot become Full.

• B) Incorrect subnet mask: Routers must be in the same IP subnet on the connected link to form a neighbor relationship. A subnet mismatch prevents Hello packets from being considered valid on the same network.

• D) Area ID not the same: Neighbors must share the same Area ID. A mismatch stops adjacency from forming beyond the 2-Way state.

• E) Different metric set on each end of the link: Cost differences do not prevent OSPF adjacency; they affect routing decisions, not neighbor formation.
• F) Router ID not defined: OSPF can auto-choose a router ID; an undefined ID is not a prerequisite for adjacency to reach Full.

• a) True — To add a field to the form layout, drag the field from the Fields tab to the desired destination on the form. This adds to the form view only, without changing the table definition.
• b) True — To create a new field on the form’s table, drag a data type from the Field Types tab to the form and configure it. This creates a new column on the table and adds the field to the form view.
• c) True — To remove a field from the form layout, hover to enable the action buttons and select Delete. This removes the field from the form view but does not remove it from the table definition.
• d) False — You cannot add a section by dragging from the Field Types tab. Sections are added via the Add Section option (toolbar or right-click menu), not from the Field Types tab.

• A (training data, hyperparameters, stakeholder feedback) focuses on training provenance; these details are important but are typically part of pre-deployment/training records, not the primary post-deployment documentation.
• B (encountered issues, monitoring process, risks) relates to governance and monitoring rather than the core documentation you’d publish about the deployed model itself.
• C (licensing information, the team, business goals) covers governance context but not the technical traceability and performance-based record needed for ongoing maintenance.