SAP C_BW4H_2404 Exam Prep
SAP Certified Associate - Data Engineer - Data Fabric (Page 2 )

• File is shared externally ? Access level

• File is labeled “Internal only” ? Sensitivity label

• Suspended an operator who correctly refused to use unsafe equipment.
• Rewarded another operator for using the equipment despite the broken safety guard.

• A — Management is not particularly concerned with managing risks.

• B — Employees will perceive that management does not care about health and safety risks.

• C — This factory’s safety record is likely to be poor.

• Instant messaging/chat: Can be abused to send malicious links or attachments, but P2P file sharing is the more direct high-risk source.
• E-mail: A common malware delivery method, but this question specifically emphasizes an application type associated with direct file exchange.
• End-to-end applications: This describes communication protection or architecture, not a specific application category known for malware distribution.

• Note the question number before leaving—for example, Question 38.
• Use the exam’s question navigator or Back/Previous button to return to that number.
• If you close or refresh the page, your position may not be saved, depending on the site. Reopen the page and select the question number again.
• Avoid using the browser’s Back button if it causes the exam page to reload; use the exam’s built-in navigation instead.

• D — Managers focus on keeping costs low in the short term to maximise profits.

• E — Managers are given incentives to meet or undercut budgets.

• F — Managers delegate responsibility simply to reduce their workload.

apex 
for (Account updatedAccount : Trigger.new) { 
    AccountTriggerHelper.notinyxternalSystem(updatedAccount.Id); 
}

• Too many callouts: The callout occurs asynchronously in the future method, and each future transaction can perform its permitted callouts.
• Too many SOQL queries: The SOQL query is inside the future execution, not repeatedly in the trigger transaction.
• Callout from triggers not supported: Direct callouts from triggers are prohibited, but the trigger delegates the callout to asynchronous Apex, which is the correct pattern.

• IRR assumes that interim cash flows can be reinvested at the project’s own IRR. This may be unrealistic, especially when the IRR is very high.
• MIRR assumes reinvestment at a specified rate, usually the company’s cost of capital or another realistic reinvestment rate.

• B: MIRR does not specifically favour projects with long payback periods.
• C: MIRR and IRR can rank competing projects differently.
• D: MIRR is not always higher than IRR; it may be higher or lower depending on the cash flows and reinvestment rate.

• A — VARIANT "null" values are not the same as SQL NULL values: True

• B — Frequent, single-row DMLs: False

• C — Validate data before loading into the target table: True

• D — Use staging tables to manage MERGE statements: True

• Virtual introductions: Team members share their role, experience, location, and working preferences.
• Online icebreakers: Short, informal activities such as “two truths and a lie.”
• Virtual coffee chats: Pair team members for informal, non-project conversations.
• Collaborative problem-solving: The team works together on an online puzzle or scenario.
• Retrospectives: The team discusses what went well, what did not, and how to improve.
• Working-agreement sessions: The team agrees on response times, meeting etiquette, communication channels, and handoffs.
• Recognition sessions: Members acknowledge one another’s contributions.
• Remote workshops: Teams jointly create plans, diagrams, or schedules using collaboration tools.

• A. IDS attack signatures: An IDS primarily detects suspicious network activity; it is not the best control for scanning uploaded documents for malware.
• C. Load balancer: Distributes traffic among servers and improves availability, but does not inspect files for malware.
• D. WAF: Protects web applications against attacks such as SQL injection and command injection. It may help secure the upload function, but malware scanning is the key requirement here.

• Link-local — FE80::/10; valid only on the local link/subnet and not routed by routers.
• Multicast — FF00::/8; identifies a group of interfaces rather than a private address range.
• Global unicast — 2000::/3; publicly routable IPv6 addressing.

1. Which host originated the infection
2. Whether each other host is clean or infected
3. Which firewall or host logs provide evidence of the infection’s movement

• Find the earliest infection-related event. The host associated with that event is the likely origin.
• Follow the timeline: outbound connections from that host may indicate propagation or command-and-control activity.
• A host receiving suspicious traffic is not automatically infected; look for evidence that it executed or initiated malicious activity.
• A firewall log can show traffic paths, but endpoint logs are usually needed to confirm infection.
• Mark a host clean only when the logs show no indicators of compromise or malicious activity.

• Create the field in the CRM on the relevant person records—typically Lead and Contact in Salesforce.
• Give the Marketo Sync User read/write access to the field.

• A local network gateway represents an on-premises network—its address space and VPN device information—for an Azure Site-to-Site VPN connection.
• It does not control which connection types are allowed between Azure web servers and database servers.
• It is also unnecessary when both server groups are in the same Azure virtual network.

• Sets a high initial price for a new product.
• Targets customers willing to pay more, often called early adopters.
• Gradually reduces the price to attract more price-sensitive customers as the product becomes less novel and competition increases.

• Penetration pricing: starts with a low price to gain market share quickly.
• Premium pricing: maintains a high price to communicate superior quality or status; it does not necessarily involve later price reductions.
• Loss leader pricing: sells one product at a very low price, sometimes below cost, to attract customers who may buy other products.

• Shared capacity

• Fabric capacity — F SKUs

• Fabric trial capacity

• Existing Power BI Premium — P SKUs

1. Wireless AP

1. Router

1. Firewall

1. Device placement

1. Initiation

1. Planning

1. Execution

1. Monitoring and controlling

1. Closing

• Internal audit: Reviews the organization’s own controls and processes.
• Penetration testing: Actively tests systems for exploitable vulnerabilities.
• Attestation: A SOC 2 report is an attestation product issued by an independent auditor, but the analyst is not performing the attestation. They are reviewing it as part of vendor evaluation.

• Atomicity: a write fully succeeds or does not appear.
• Consistency: table state remains valid.
• Isolation: concurrent operations do not corrupt one another.
• Durability: committed changes persist.

• Flexible schemas: common data lakes often support flexible or schema-on-read data.
• Open-source formats: common data lakes commonly use open formats such as Parquet.
• Scalable storage: cloud data lakes already provide scalable storage.

• C. Case after-insert trigger that publishes a Platform Event

• D. Custom Apex controller that publishes a Platform Event

• A. Trigger with a callout: Salesforce triggers should not make direct synchronous callouts, and this tightly couples transaction processing to the external system.
• B. Workflow Rule with Outbound Message: This can react to record changes, but it cannot reliably capture a user clicking a menu item. It also does not provide the same flexible event-driven model as Platform Events.

• The connected switch
• The switch’s port/interface
• Device and port descriptions
• Sometimes VLAN or management information

• IKE: Establishes security associations for IPsec VPNs.
• VLAN: Defines logical network segmentation; it does not identify a physical switch port.
• netstat: Displays local network connections and statistics, not the upstream switch and port.

• The vulnerability scan identifies a vulnerability.
• The administrator verifies that the vulnerability is not present.
• Therefore, the scan produced a false positive.

• True positive: A vulnerability is reported and genuinely exists.
• False negative: A vulnerability exists, but the scan fails to detect it.
• True negative: No vulnerability exists, and the scan correctly reports no issue.

• B — AWS DataSync: Transfers data between storage systems. It is not a marketplace or integration service for third-party datasets.
• C — Kinesis Data Streams and CodeCommit: CodeCommit stores source code, not third-party analytical datasets. Kinesis is for streaming data, not retrieving datasets from repositories.
• D — Kinesis Data Streams and ECR: Amazon ECR stores container images, not third-party datasets.

• Amazon S3 as the origin for static content
• Application Load Balancer (ALB) as the origin for dynamic content
• Amazon Route 53 configured to point the company’s domain name to CloudFront

• /static/* ? S3 origin; cache content at edge locations
• Dynamic paths such as /api/* ? ALB origin; forward requests to the EC2 application

• Deterrent control: The signs warning that people may be filmed can discourage unauthorized or malicious activity. They do not directly stop the action; they influence behavior.
• Detective control: CCTV records or monitors activity so security personnel can identify events or investigate them afterward.

• Preventive: Stops an incident from occurring, such as access control.
• Corrective: Restores systems after an incident.
• Directive: Instructs people to behave in a certain way, such as a security policy.
• Compensating: An alternative control used when the preferred control is not feasible.

• Unsafe images: Requires image/content moderation before the image is processed.
• Hidden instructions embedded in images: These are indirect prompt injections contained in untrusted image content or extracted text, not necessarily in the user’s typed prompt.

• Type 1 hypervisor: Runs directly on the physical hardware (“bare metal”).
• Type 2 hypervisor: Runs inside the host OS as an application.

• Bare-metal installation: Type 1
• Local management only: Not a defining characteristic
• Specific hardware requirements: Not the key distinction

• Label applied does not automatically exclude a file from Copilot.
• Encryption/usage rights determine whether Copilot can access the file’s content.
• If the user has no permission under Label2, File3 should be unavailable to Copilot for that user.
• File3’s label might be inherited by derived content only if File3 was actually processed and contributed by an authorized user; it should not be treated as contributing merely because it exists in the source set.

• Two-part tariff pricing: $10 per unit
• Dual pricing: $20 per unit

Two-part tariff pricing

Dual pricing

• Division X, the seller, is credited with the market price: \(\$20\)
• Division Y, the buyer, is charged the marginal cost: \(\$10\)

• Due diligence: Investigating and evaluating a third party before entering into or continuing a business relationship.
• Attestation: An independent party provides assurance about an organization’s claims or controls. A SOC 2 examination is an example of an attestation engagement, but the analyst requesting and reviewing the report is performing due diligence.
• Internal audit: Reviews the organization’s own internal controls.
• Penetration testing: Actively tests systems for exploitable vulnerabilities.

• Lower order numbers appear first.
• For example, a variable with order 100 appears before one with order 200.
• The Sequence field is not the control used for catalog variable display order.
• The Default Value sets a value, not placement.
• The Choice field defines selectable options, not the variable’s position.

• The JSON files contain one billion items, so this is a big-data workload.
• PySpark uses Apache Spark’s distributed, parallel processing, allowing the data to be processed across multiple compute nodes.
• It can read and transform data directly from OneLake, helping minimize unnecessary data movement or duplication.
• A Fabric notebook can also support exploration and visualization, as well as Spark-based analytics and anomaly-detection workflows.

• Pandas is primarily in-memory and generally suited to smaller datasets. One billion records would be impractical on a typical single machine.
• A Power BI report with core visuals is appropriate for visualization and sharing, but it is not the best tool for large-scale transformation, parallel processing, or anomaly detection. It would normally consume prepared data rather than perform the entire workload.

• Storage usage of files stored in Microsoft Teams: SharePoint site usage report

• Number of active users per team: Microsoft Teams usage report

1. SharePoint site usage report
2. Microsoft Teams usage report

• miami.weyland.com requires a custom domain, which is not available in the Free tier.
• Two instances require a tier that supports scaling out. Standard supports multiple instances.
• SSL support is available in Standard.
• 12 GB of storage exceeds the storage limit of the Basic tier in the older Azure pricing model used by this question.
• Standard provides sufficient storage and features while being cheaper than higher tiers—though higher tiers are not listed here.

• Free/Shared: insufficient features for custom domains, SSL, and multiple instances.
• Basic: supports some production features, but its storage capacity is insufficient for the required 12 GB.

• Record changes — a flow can start when a record is updated or otherwise changes.
• Schedules — a flow can run at a specified date/time or on a schedule.
• Record inserts — a flow can start when a new record is created.

• Subflows are reusable flow components called by another flow; they are not normally trigger types.
• Record views do not generally initiate a Flow Designer flow.

• Custom domains: Supported by Basic and higher tiers.
• Dedicated compute: Basic and Standard use dedicated virtual machine instances; Free and Shared use shared infrastructure.
• Load balancing between instances: Standard provides scaling across multiple instances with load balancing.
• Storage: Standard provides more storage than Basic.
• Cost: Standard is the least expensive option that satisfies all the stated requirements.

• Free/Shared: Use shared compute and have limited features; they don’t meet the dedicated-compute requirement.
• Basic: Provides dedicated compute and custom domains, but does not provide the required Standard-level multi-instance capabilities in the exam’s feature comparison.

1. System prompts can authorize users — No

1. System prompts can reduce TPM consumption — Yes, with qualification

1. System prompts guide generative AI behavior — Yes

• Normal or expected input
• Boundary values
• Invalid input
• Potential error conditions

• A is incorrect: it creates test code, not detailed test documentation.
• C is incorrect: it does not primarily integrate external testing frameworks.
• D is incorrect: executing tests requires your development environment or test runner.

• API tool matcher: runs a deterministic normalization command after the API tool returns.
• Write/Edit matcher: checks whether the target path begins with src/api/ and runs the linter.

json 
{ 
  "hooks": { 
    "PostToolUse": [ 
      { 
        "matcher": "api_tool", 
        "hooks": [ 
          { "type": "command", "command": "normalize-to-snake-case" } 
        ] 
      }, 
      { 
        "matcher": "Write|Edit", 
        "hooks": [ 
          { "type": "command", "command": "lint-if-under-src-api" } 
        ] 
      } 
    ] 
  } 
}

apex 
Set<Id> accountIds = new Set<Id>{ accountId1, accountId2 }; 


List<Account> accounts = [ 
    SELECT Id, Name 
    FROM Account 
    WHERE Id IN :accountIds 
];

• A: LIMIT accepts a number, not a collection of IDs.
• B: Set.containsAll() checks set contents in Apex; it does not filter SOQL results.
• C: Database.query() accepts a dynamic SOQL string, not a Set<Id> directly.

• Early units show relatively large time savings.
• Later units still take less time, but the reduction becomes progressively smaller.
• The curve therefore becomes flatter as production approaches 256 units.

• B: The reduction is not constant; learning normally diminishes over time.
• C: Time does not reduce at an increasing rate.
• D: A steady state may eventually be reached, but the question concerns the first 255 units while learning is still occurring.

1. Create a temporary Onboarding OU.
2. Move the new account into it.
3. Move the restrictive SCPs from the organization root to the Production OU.
4. Allow the account to update AWS Config.
5. Move the account into Production after onboarding.

• An SCP attached at the organization root applies to every account and OU beneath it.
• An SCP attached to the Production OU applies only to accounts in that OU.
• Therefore, moving the restrictive SCP from the root to Production temporarily exempts the onboarding account without weakening the policies for existing production accounts.
• Once onboarding is complete, moving the account into Production subjects it to the normal restrictions.

• Malware or malicious software
• Command-and-control tools
• Internet surveillance and intrusion software

• ITAR: A U.S. regulation controlling defense-related articles and services; it is not the international arrangement described.
• Palermo Convention: Focuses on transnational organized crime and related protocols, not export controls for cyber weapons.
• GDPR: European data-protection and privacy legislation.

• Honeypots: Decoy systems designed to attract attackers. Legitimate users should not access them, so activity there is a strong indication of unauthorized access.
• DNS sinkholes: Redirect requests for known malicious domains to a controlled internal destination instead of the real attacker infrastructure. Security teams can then identify infected systems making those requests.

• Tokenization: Replaces sensitive data with non-sensitive tokens; it protects data but does not detect intruders.
• CI/CD: Software development and deployment processes.
• Threat modeling: Identifies potential threats before or during system design, rather than detecting successful infiltration.
• Data obfuscation: Makes information harder to understand, but is not an attacker-detection mechanism.

1. Open the Microsoft Entra Connect wizard.
2. Select Configure.
3. Choose Customize synchronization options.
4. Authenticate when prompted.
5. On the Domain and OU filtering page, select:

1. Complete the wizard.

• Start-ADSyncSyncCycle only starts synchronization; it does not change which OUs are included.
• Manage federation configures federation settings, which are unrelated to OU filtering.
• Add-ADSyncConnectorAttributeInclusion concerns connector attributes, not selecting additional OUs for synchronization.

• Elasticity: Automatically increases or decreases resources based on demand.
• Scalability: The ability to increase capacity to handle more workload.
• Low latency: Minimizes network response time; it does not provide protection from failures.

• A password cracker would normally be identified by behavior such as loading password hashes or attempting dictionary/brute-force attacks.
• The question describes a routine audit, not password recovery.
• Simply encountering a protected file during an audit is characteristic of a misconfigured or insufficiently privileged FIM.