SAP C_HR890_24 Exam Actual Questions
SAP Certified Application Associate - SAP Commissions (Page 3 )

• The correct permission is Manage Sandboxes (the official Salesforce name; the option in the list is written as “Manage Sandbox,” which is effectively the same idea but the canonical name uses the plural).
• Why: Sandboxes are a lifecycle feature. Only users with the explicit Manage Sandboxes permission can perform create, delete, refresh, or activate actions.
• Why the other options aren’t correct:

• Correct answer: D) Microservices using API

• Why:

• Correct answer: enable SLAAC on an interface (C)

• Why the other options are not correct:

• The 99.99% availability SLA for VMs is achieved when you run VMs across two or more Availability Zones.
• Two VMs in a single Availability Zone do not meet the 99.99% target (their SLA is lower, e.g., around 99.95% or less depending on configuration).

• Deploy at least two VMs across two different Availability Zones (one VM in each zone, or both in two zones with a load balancer).
• This provides the required zone redundancy and the 99.99% SLA.

• Answer: A) Clear the Windows event logs

• Windows event logs (System, Security, Application) are key forensic artifacts. If an attacker clears these logs, there’s no built-in local record of actions taken, making it harder for investigators to trace what happened.

• Modify the system time: may misalign timestamps but does not erase past events and can be easily detected.
• Alter log permissions: could prevent new log entries, but it doesn’t remove existing ones and can raise alarms due to permission changes.
• Reduce log retention settings: affects only future logs; it doesn’t wipe already recorded activity.

• In real environments, defenders mitigate this risk with tamper-evident, centralized logging (remote SIEM, write-once storage, log integrity checks) to preserve evidence even if a host is compromised.

• Coordinate and manage the assessment team
• Assign assessment activities
• Direct interviews, examinations, and tests
• Ensure the assessment follows the CAP

• Answer key: Lead Assessor — likely wrong
• CAP-based answer: C3PAO

• Shadow IT describes employees using unsanctioned tools or methods to access systems, often without IT oversight (e.g., bypassing the VPN).
• Not A (Espionage): this implies external covert actors; here the activity is internal.
• Not B (Data exfiltration): there’s no explicit data transfer shown, just bypassing the VPN.
• Not C (Nation-state attack): this involves external political/strategic actors; not the internal behavior described.

• Implement policy and training to enforce approved tools.
• Use IAM, VPN enforcement, and network access controls to ensure only sanctioned access.
• Monitor for unsanctioned tools and provide secure, approved alternatives.

• Answer: C – netstat -an

• netstat -an lists all active connections and listening ports with numeric addresses, without resolving names. This lets you spot DoS patterns such as a flood of connections to a specific port or many connections from a single or few IPs.
• The other options don’t help as directly:

• Windows: netstat -an and look for numerous ESTABLISHED connections to a service or many SYNs to a port.
• Filter by port, e.g., netstat -an | findstr :80, or on Linux: ss -tunap | grep ':80'.

• Netstat provides a snapshot. DoS detection often benefits from continuous monitoring, flow data, and IDS/IPS logs.

• A recipient who already has a Microsoft account or an organizational account can authenticate by signing in.
• A recipient without a usable Microsoft identity may receive a one-time passcode by email.
• The passcode is sent to the same email address that was invited and is used to verify ownership of that address.

• Used for communication on the local link or LAN segment
• Automatically generated on IPv6-enabled interfaces
• Not routed by routers to other networks
• Commonly used by devices to communicate with their local IPv6 router
• Begins with FE80 through FEBF

• FC00::/7 — unique local unicast
• FE80::/10 — link-local unicast
• FF00::/8 — multicast
• 2000::/3 — global unicast

• The diagnostic output shows that the protocol is TCP (proto=6) and the session state is 2.
• In FortiGate’s session output, state=2 maps to SYN_SENT. This means the TCP SYN has been sent but the handshake hasn’t completed yet.
• Therefore, the session is not ESTABLISHED, FIN/ACK-related states, or other states; it’s in SYN_SENT.

1. Download the updated VPN client configuration package from the Azure VPN gateway.
2. Remove or update the existing VPN client configuration on the Windows 10 workstation.
3. Install the new package and reconnect.

• S3 Versioning stores all versions of an object. If an object is overwritten or deleted, you can recover the previous version using its version ID.
• This protects against accidental deletion or overwriting because the original data remains accessible as an older version.
• How to enable:

• Practical notes:

• S3 Lifecycle rules: automate moving/expiring data, not specifically protection against deletion.
• S3 bucket policies: control access but don’t inherently preserve previous data.
• S3 server-side encryption: protects data at rest, not against deletion/overwrite.

• A separate scope using a /32 subnet: A /32 identifies one host, but it is not a practical DHCP scope for this purpose.
• A static IP within the DHCP range: This can cause an IP address conflict if DHCP assigns that address to another device.
• SLAAC: Used for automatic IPv6 address configuration, not for assigning a predictable IPv4 address through DHCP.

• Review the risk register.
• Use the previously defined risk response plan, such as assigning a backup resource, reprioritizing work, or using another qualified engineer.
• Implement the response promptly because the task is on the critical path.

• B: Revising the schedule without first applying the planned response may be premature.
• C: Excluding a required task could compromise the project’s objectives and requirements.
• D: Updating the risk and lessons learned records is appropriate, but it should happen after managing the immediate issue, not as the next primary action.

• Geo-redundant storage (GRS) replicates data to a secondary Azure region, but the secondary copy is normally unavailable for read access.
• RA-GRS provides geo-replication and read-only access to the secondary region, satisfying all requirements.
• Zone-redundant storage (ZRS) replicates data across availability zones within the same Azure region, not separate geographic regions.
• Locally redundant storage (LRS) keeps copies within a single datacenter or region and does not provide geographic resiliency.

• Correct answer: Power BI dataset

• The scenario says the data model already contains several measures and you want to create a report from the existing data with minimal development. Reusing a published Power BI dataset lets you inherit the existing measures and data model, so you don’t have to recreate them.
• How to do it: In Power BI Desktop, use the connector Power BI datasets (Get Data > Power BI datasets) and connect to the existing dataset, then build visuals using the pre-defined measures.
• Why the other options are less suitable:

• Risk transfer means shifting the financial impact of a threat from the organization to another party (the insurer). Buying cyber insurance accomplishes this shift.
• It is not Accept: acceptance of risk would be tolerating it without action.
• It is not Mitigate: mitigation involves reducing likelihood or impact with controls, not shifting costs.
• It is not Avoid: avoidance would be not engaging in the activity that creates the risk; insurance does not remove the risk itself.

• Wiping securely overwrites the drive so the original data cannot reasonably be recovered. It is generally less expensive than physically destroying the device.
• Recycling could expose the data if the drive is not securely erased first.
• Shredding physically destroys the drive and is effective, but usually more costly and prevents reuse.
• Deletion only removes file references; it is not a secure sanitization method.

• Correct answer: A) Hashing

• Why: Hashing produces a fixed-size digest of the software. If the final build is altered in any way, the hash will change, enabling you to detect tampering by comparing the stored digest with a freshly computed one.

• Why not the others:

• Question 142: Security governance is MOST associated with which IT infrastructure component? Network / Application / Platform / Process
• Answer: D. Process

• Security governance is about how decisions are made, accountability, and oversight to ensure security objectives align with business goals. These are implemented through governance processes (policy development, risk management, assurance, monitoring, escalation, etc.).
• The other options (Network, Application, Platform) are concrete IT components; governance affects them, but it’s exercised primarily through the processes that govern how those components are managed and controlled.

• In governance-related questions, focus on the decision-making, accountability, and control processes rather than the underlying technology components.

• L2TP uses UDP port 1701 for the L2TP control channel.
• The destination port is 1701; the source port is a dynamically chosen ephemeral port on the client (not 1701).
• Therefore the statement that both source and destination ports are 1710 is incorrect (and 1710 is not the standard L2TP port).

• The destination port should be 1701, not 1710.
• The source port should be an ephemeral port chosen by the client, not 1701.

• The correct answer: B) Synthetic identity theft.

• Synthetic identity theft involves creating a new, forged identity by combining information from multiple real people (e.g., names, dates of birth, SSNs) to commit fraud.
• In the scenario, Adam “created a new identity by obtaining information from different victims,” which matches the idea of synthesizing data to form a fake person.

• Medical identity theft: using someone’s medical information to obtain care or services.
• Tax identity theft: using someone’s personal info to file fraudulent tax returns.
• Social identity theft: impersonating someone to deceive others socially or publicly.

• Look for phrases like “create a new identity” or “combine information from multiple people” to identify synthetic identity theft.

• Review iteration length: Changing duration does not resolve unclear requirements.
• Limit work in progress: Useful when excessive multitasking is the problem, but it does not directly clarify requirements.
• Review individual performance: The issue is a process and backlog-quality problem, not necessarily an individual performance problem.

• Answer: C — Spot Instances

• Why: The workload is a test environment that can be interrupted and does not need to run continuously. Spot Instances let you bid on unused EC2 capacity at a deep discount, making them the most cost-effective option for interruptible workloads.

• Why not the others:

• Quick tips:

• Multi-pass wipe: Overwrites the drive’s existing data multiple times, making recovery much more difficult while preserving the drive’s functionality.
• Single-pass wipe: May be sufficient in some modern sanitization standards, but is presented here as less secure than multiple overwrites.
• Degaussing: Uses a strong magnetic field to disrupt data. It can render the drive unusable or unreliable, reducing its resale value.
• Pinning: Is not an appropriate data-sanitization method.

• Pay-as-you-go in Azure is an operating expense (OPEX) model, not an “elastic” expenditure model.
• Elastic or scalable terms describe capacity planning, not the cost category. The cost should be treated as OPEX since you pay for usage each month.
• The parallel question (Question 12) shows the correct approach is using an operational expenditure model.

• Port 515: LPD/LPR line-printer service
• Port 631: IPP — Internet Printing Protocol
• Port 9100: JetDirect/RAW printing, commonly used by network printers

• Linux machine: Linux could run these services, but the three printer-specific ports strongly indicate a printer.
• Router: Routers may use Telnet and HTTP, but normally would not expose ports 515, 631, and 9100 together.
• Windows machine: Windows can share printers, but this particular service combination is more characteristic of a network printer’s embedded operating system.

• Two instances: Free/Shared do not provide the production-level multi-instance hosting you need. Basic/Standard support more than one instance, with Standard specifically meeting the scale requirement.
• SSL support: SSL (custom domain TLS) isn’t available on the Free tier and isn’t a driver for cost on paid tiers—but you’ll need a paid tier to map a custom domain (miami.weyland.com) and use SSL.
• Storage: Your site needs 12 GB. Free/Shared have very limited storage; Basic tier storage is typically smaller than what you need, while Standard provides substantially more storage capacity.
• Cost: Among the tiers that meet all requirements (two instances, SSL, sufficient storage), Standard is the lowest-cost option that satisfies them.

• View/inspect configuration: Possible.
• Modify the installed application or its S-Controls: Typically restricted in a test-drive org.

• Amazon GuardDuty: Detects suspicious activity and threats using security-related data sources; it is not primarily a software vulnerability scanner.
• Amazon Detective: Helps investigate and analyze the root cause of security findings after an event.
• Amazon Cognito: Provides user authentication and authorization for applications.

• Quick context: In a three-tier network (Access, Distribution, Core), roles are:

• Why A is correct: The Distribution layer runs Layer 2 and Layer 3 technologies. It often handles VLAN access (L2) and can perform inter-VLAN routing or connect to the core (L3). So it makes sense for the distribution layer to support both L2 and L3.

• Why B is correct: The Core layer is designed to maintain continuous connectivity when devices fail. It is built for high availability and redundancy, providing multiple paths so the network remains reachable even if some components fail.

• Why the others are not correct:

• Correct answer: C: Amazon Comprehend.

• Why: The library wants to classify books based on their text content. This is an NLP (natural language processing) task. Amazon Comprehend is AWS’s managed NLP service that can perform content classification (including creating custom classifiers) and extract meaningful information from text. The other services are not focused on text classification:

• Quick note: In practice, you’d store the books in S3, extract text if needed (e.g., from PDFs with Textract), and then use Comprehend to classify the documents into topics or genres.

• UPS (uninterruptible power supply) provides battery backup (time to save work and shut down).
• Surge protector only blocks surges; it does not provide backup power.
• To maximize uptime for essential tasks, put the devices that must stay powered during an outage on the UPS. Put less-critical devices on the surge protector or a wall outlet.

• Put on the UPS: the desktop computer, monitor, network gear (router/modem), and any external drives or essential peripherals you need to keep running to save to the cloud.
• Put on the surge protector (or wall outlet): nonessential devices like printers, scanners, speakers, or lamps.

• Reusing features across different models and teams
• Consistent feature definitions
• Managing feature versions and metadata
• Using features for both training and inference

• SageMaker Data Wrangler: Prepares and transforms data; it is not primarily a shared feature repository.
• SageMaker Clarify: Helps detect bias and explain model predictions.
• SageMaker Model Cards: Documents models, including intended use, risks, and evaluation results.

• Topic: Conditional Access (CA) policy and MFA for Azure management.
• Policy name: Policy1, created with the template “Require multifactor authentication for Azure management.”
• What the template does: It enforces MFA when signing in to manage Azure resources (Azure management) for the users included in the policy.
• Who is included: The question lists Admin1, Admin2, Admin3, and Admin4 as the admins in the tenant. The template’s default scope for this scenario is to apply to those admin accounts (i.e., all four admins unless you explicitly limit the scope).

• CA policy for “Azure management” targets admin sign-ins.
• If the policy includes Admin1–Admin4, all of them must use MFA on their next sign-in (choice D).

• Use a field on Account to show the aggregated yearly shipments (a Roll-Up Summary).
• A Master-Detail relationship between Shipment and Account is required for Roll-Up Summary to work (and to ensure access is governed by the parent Account).
• OWD and the relationship type determine what users can see. If you want to restrict shipment-level access while still showing a summary on Account, Private OWD on Shipment plus Master-Detail helps, because access to shipments is controlled by the Account record.

• A (Public OWD on Shipment with Process Builder and a Lookup to Account): Not ideal. Public access would expose shipments broadly, and a lookup cannot support a built-in roll-up summary.
• B (Private OWD on Shipment, Roll-Up Summary, Master-Detail to Account): Best answer. Private shipments, but because of Master-Detail, access and the roll-up are tied to the Account. The Account can show the yearly total via a Roll-Up Summary field.
• C (Controlled by Parent on Shipment, Trigger, Master-Detail): Master-Detail is correct, but using a trigger is unnecessary for a straightforward roll-up; roll-ups are the standard, maintainable solution.
• D (Private OWD on Shipment, Trigger, Lookup to Account): More complex and not as efficient; no automatic roll-up, and lookup breaks the ease of summarizing by Account.

• Progress iteratively with feedback focuses on making improvements in manageable steps and learning from feedback.
• Optimize and automate focuses on maximizing value from resources and automating suitable activities.
• Start where you are focuses on assessing the current situation and reusing what already exists.

• App Tag: a label that reflects the app’s enterprise readiness based on its Cloud Confidence Index (CCI) rating. It lets you quickly group apps (e.g., Poor, Average, Good) for policy decisions.
• App Score: a numeric value representing the CCI score. It provides a precise threshold you can use to enforce policies (e.g., block apps with Score below 50).

• You can create policies that block or restrict apps with a Poor App Tag or with an App Score under a chosen threshold.
• These two aspects let you filter cloud apps by CCI ratings during policy evaluation.

• CCL isn’t described as a real-time policy facet in this scenario.
• GDPR Readiness is a separate consideration and not the two CCI aspects used for real-time protection policy in this context.

• I can’t view the images, so I can’t tell which table is labeled as A in your screenshot. But here’s how to decide:

• How to identify the fact table:

• How to identify the surrogate key in the Patient table:

• Relationship:

• The Scrum Guide specifies four required events: Sprint Planning, Daily Scrum, Sprint Review, and Sprint Retrospective. These events enable transparency, inspection, and adaptation.
• The other items listed are not mandatory under Scrum:

• Goal: Identify the host that originated the infection, then label each remaining host as infected or clean based on log evidence.

• Logs to review (across hosts and firewall):

• How to identify the origin:

• How to classify other hosts:

• Quick tip: use the Reset All option if you want to re-run the scenario and practice again.

• Correct answer: B — A reservation for the server based on the MAC address.

• Why this is the best choice:

• Why the other options are less suitable:

• Quick takeaway: Use a DHCP reservation to give the file server a fixed IP while still benefiting from centralized DHCP management.

• A assigned without var becomes a global variable (in non-strict mode). So after myFunction(), a = 5 is accessible.
• b is declared with var inside the function, so it’s local to that function (function-scoped). It’s not defined in the outer (global) scope.

• console.log(a) prints 5.
• console.log(b) throws a ReferenceError: b is not defined.

• Correct answer: D) Amazon Aurora Serverless

• Aurora Serverless is serverless, so compute capacity scales automatically and can pause during idle periods. This minimizes ongoing administration and you pay only for actual usage, which is ideal for infrequent workloads.
• PostgreSQL on EC2 requires full OS and DB administration.
• RDS for PostgreSQL is managed but still involves provisioning capacity and some maintenance tasks.
• Aurora PostgreSQL (non-Serverless) is managed but requires you to manage capacity, though with some automation; it’s not as hands-off as Serverless for intermittent usage.

• Copilot??????????
• ???????????????
• ??????????
• ?????????????
• ???????????????????

• Prompts and Suggestions: Retained for 28 days
• User Engagement Data: Kept for Two Years

• Ethical red-teaming is adversarial testing aimed at uncovering weaknesses and potential exploits in an AI system before deployment.
• A (improving accuracy) is not the primary?? of red-teaming.
• B (simulate model risk scenarios) is related but narrower; red-teaming centers on finding vulnerabilities and risk exposure, not just simulating risks.
• D (ensure compliance) is not the main goal of red-teaming.

• Correct answer: B) Context window.

• Why: The context window is the number of tokens the foundation model can process in a single inference. It sets the maximum length of the combined input (prompt) and the model’s output. A larger context window allows more content to be included in one prompt.

• How to use: Check the FM’s context window value and ensure your prompt length plus the desired completion stays within that limit. If needed, summarize or split input across multiple prompts.

• Why the other options aren’t correct:

• Quick tip: Verify the specific FM’s context window for Bedrock, since different models have different token limits.

• Correct answer: B (No, it does not).

• A purchase agreement in Dynamics 365 SCM is a vendor-side price arrangement. It sets prices/discounts for what your company buys from suppliers, not for what you sell to customers.
• The objective in Question 2 is to give clients a quantity-based discount on items they purchase from you. To accomplish this, you should configure a sales price / trade agreement (on the customer/sales side), not a purchase agreement.
• In a sales price trade agreement, you can define quantity breaks such as:

• Create a Sales price trade agreement for the item and relevant customer (or customer group).
• Add quantity breaks: 51–100 with 10% discount, 101+ with 15% discount.
• Ensure the agreement is active for the desired date range.

python 
import azure.cognitiveservices.speech as speechsdk 


speech_config = speechsdk.SpeechConfig( 
    subscription="YOUR_KEY", 
    region="YOUR_REGION" 
)

Important Azure Speech SDK classes

• SpeechConfig

• AudioConfig

python 
  audio_config = speechsdk.audio.AudioConfig( 
      use_default_microphone=True 
  )

• SpeechRecognizer

python 
  recognizer = speechsdk.SpeechRecognizer( 
      speech_config=speech_config, 
      audio_config=audio_config 
  )

• SpeechSynthesizer

• AudioOutputConfig

 Bogotá, Colombia