SAP C_HRHFC_2105 Exam Prep
SAP Certified Application Associate - SAP SuccessFactors Full Cloud/Core Hybrid 1H/2021 (Page 3 )

• State is stored remotely in Terraform Cloud/Enterprise, not as a local file.
• Terraform runs (plan/apply) can be executed on remote infrastructure, with results visible in the remote workspace UI.
• Supports workspace-based organization, state locking, and concurrency control.
• Useful for team collaboration, centralized governance, and auditable logs.

• In your configuration, you use a backend block like backend "remote" { ... }.
• You still run terraform init to configure/migrate to the remote backend.
• After setup, terraform plan/terraform apply may be executed remotely, and the outputs/logs appear in the Terraform Cloud/Enterprise UI rather than (only) in your local terminal.

• Other backends store state remotely but typically do not provide remote execution; with the remote backend you get remote runs and a collaborative UI, not just remote state storage.

Why B works

• AWS KMS keys are Regional resources. A normal customer managed key in Region A cannot be used directly in Region B.
• A customer managed multi-Region KMS key (MRK) has related key replicas in both Regions. The replicas share key material and key ID, although each has a Regional ARN.
• With client-side encryption, the application encrypts the data before storing it in S3. Cross-Region replication then copies already-encrypted objects, so S3 does not need to decrypt and re-encrypt them with a different Regional key.

Why the other choices are weaker

• A and C: SSE-S3 uses Amazon-managed S3 keys, not the required customer managed KMS key.
• D: SSE-KMS can work only if the solution creates and configures the appropriate KMS key or multi-Region key replica in each Region. As written, it says to create a customer managed KMS key in each Region, which implies separate keys—not the same KMS key. Replication also requires additional KMS permissions and destination encryption configuration.

• prompt: the input or instruction given to the model
• completion: the desired response

json 
{"prompt":"Summarize this customer complaint.","completion":"The customer reports a delayed shipment."}

• B: A .txt file containing CSV-style lines is not automatically a valid fine-tuning dataset. The required structure and format must match the selected Bedrock model.
• C: Provisioned Throughput provides dedicated inference capacity; it does not fine-tune a model.
• D: Journals and textbooks might support domain adaptation or pretraining, but they do not provide the prompt-to-answer examples typically required for supervised fine-tuning.

• Answer: A — EC2 Image Builder

• Why: EC2 Image Builder is AWS’s fully managed service designed to automate the creation, testing, and ongoing management of custom EC2 AMIs. It lets you build image pipelines that start from a base image, apply software/components, run tests, and publish/distribute the resulting AMIs across regions or accounts.

• How it works (high level):

• Why not the other options:

• Quick tip: Use EC2 Image Builder to reduce manual image maintenance and drift, and to enforce consistent, tested base images across environments.

• Pull: Downloads changes from the central repository and updates the local repository.
• Push: Sends local commits to the central repository.
• Commit: Records local changes in the repository’s history.
• Merge: Combines changes from different branches.
• Clone: Creates a new local copy of a repository.

• Answer: D

• The strongest security comes from enforcing access at the storage layer. An IAM policy scoped to the Cognito identity prefix restricts each user to their own S3 prefix (folder), so users can only access their own files regardless of client or server code.
• This per-user isolation reduces risk of cross-user data access and is more robust than UI validation or Lambda/API validation alone.
• Implementation note: attach a policy to the Cognito identity role that allows actions on arn:aws:s3:::your-bucket/${cognito-identity.amazonaws.com:sub}/* (per-user prefix). Ensure TLS in transit and enable at-rest encryption (SSE-S3 or SSE-KMS). Use multipart upload for large files up to 300 MB.

• A — VARIANT "null" values are not the same as SQL NULL: Correct.

• B — Frequent, single-row DMLs: Incorrect.

• C — Validate data before loading into the target table: Correct.

• D — Use staging tables to manage MERGE statements: Correct.

• Why: Crisis management relies on established, repeatable procedures for responding to an incident (activation of the crisis team, escalation paths, communications, containment actions). This ensures a coordinated, timely, and auditable response.

• Why not the others:

• A. IDS attack signatures: An IDS primarily detects suspicious network activity and usually alerts rather than directly scanning and blocking uploaded files.
• C. Load balancer: Distributes traffic among servers but does not inspect files for malware.
• D. WAF: Protects web applications from attacks such as SQL injection, cross-site scripting, and some malicious requests. It is not primarily a PDF-malware scanning solution.

• Secure: uses encryption, such as HTTPS or SFTP.
• Cross-platform: supported by many languages and operating systems.
• Internet-friendly: designed to communicate across networks, usually using standard Internet protocols.

• JSON/REST over HTTPS — widely supported, secure, and Internet-friendly.
• SOAP over HTTPS — also secure and highly cross-platform, though more heavyweight.
• XML over SFTP — secure file-based exchange, but it is not an API-style interface.

• A private IP address on the virtual network
• An associated public IP address

• A: Daily involvement is unnecessary and may not solve the availability problem.
• C: Clarifying all requirements at the start conflicts with agile’s iterative refinement.
• D: Simply reviewing based on availability leaves the problem unresolved and allows rework to continue.

• Approval publish: Request approval from a manager of the knowledge base before moving the article into the publish state.
• Instant Publish: Immediately publishes a draft article without requiring an approval.
• Instant Retire: Immediately retires a published article without requiring an approval.
• Retire Knowledge: Moves a knowledge article to the retired state.

• These are the base knowledge workflows that control how articles move between states (Draft, Published, Retired) and whether approvals are required.
• The other options describe different lifecycle actions, but these four cover the standard publish/retire workflows in ServiceNow.

• Improve QA testing efficiency: A prototype may help discover defects early, but that is not its greatest benefit.
• Decrease time allocated for user testing and review: Prototyping usually requires additional user involvement and review, not less.
• Minimize scope changes: Prototypes can actually reveal new requirements or cause scope changes. However, discovering those changes early is beneficial.

• Entradas grandes, de até aproximadamente 1 GB.
• Processamentos demorados, que podem levar até cerca de 1 hora.
• O cliente envia a solicitação e consulta o resultado depois, sem precisar manter uma conexão aberta durante todo o processamento.

• Real-time inference: indicada para respostas imediatas, com entradas menores e processamento rápido.
• Serverless inference: adequada para cargas variáveis e solicitações menores; não é ideal para processamento longo e arquivos grandes.
• Batch transform: processa grandes volumes em lote, mas não atende à necessidade de respostas próximas do tempo real.

• Copilot??????????
• ???????????????
• ??????????
• ?????????????
• ???????????????????

• Prompts and Suggestions: Retained for 28 days
• User Engagement Data: Kept for Two Years

1. Identify every Region containing a replica.
2. Schedule deletion of the KMS key in each Region.
3. Use the minimum KMS waiting period: 7 days.

• A — Use the root user: Root access does not eliminate the need to schedule deletion for every regional replica. The problem is the multi-Region structure, not insufficient administrative permissions.

• C — Update the key policy: The policy already grants kms:* to IAM principals. Changing permissions does not delete the key or its replicas.

• D — Disable the key and schedule deletion in 30 days: Disabling can stop cryptographic use, but 30 days is slower than the permitted 7-day waiting period. It also does not address replicas in other Regions.

• 2000::/3 — Global unicast, used for publicly routable IPv6 addresses.
• FC00::/7 — Unique local, used for private internal addressing.
• FE80::/10 — Link-local, used only on the local network segment and not routed between subnets.

• Goal: Identify the host that originated the infection, then label each remaining host as infected or clean based on log evidence.

• Logs to review (across hosts and firewall):

• How to identify the origin:

• How to classify other hosts:

• Quick tip: use the Reset All option if you want to re-run the scenario and practice again.

• IPsec: Protects traffic at the network layer, commonly for VPNs; it is not WPA2’s authentication protocol.
• SSL: Protects specific application sessions and has largely been replaced by TLS.
• SSH: Secures remote command-line administration.

• What wipe does: A factory reset that erases all data, apps, and settings and returns the device to the OOBE. It removes the device from management and resets identity.
• Why not for this scenario: The goal is to repurpose the same device to a new user with Autopilot. Autopilot Reset keeps the device’s Azure AD/Intune identity and re-provisions the device for the next user without a full wipe.
• What Autopilot Reset does: Removes user data and apps but preserves device identity and management connection, then reapplies the Autopilot provisioning for the next user.
• When you’d use wipe instead: If you’re selling or permanently discarding the device, or you truly want to scrub all traces and start fresh without re-enrolling.

• Active vs passive: Active assessment involves actively scanning targets by sending probes/packets to identify hosts, services, and vulnerabilities. Passive assessment observes traffic without probing.
• External vs internal: External assessment is about testing from outside the network perimeter; the scenario doesn’t specify external vantage, only that tools are identifying hosts/services across the enterprise network.

1. Define Power Platform DLP policies
2. Add custom prompt modifications
3. Conduct adversarial testing

1. DLP policies first

1. Prompt modifications second

1. Adversarial testing last

• As the project progresses, you gain information, refine requirements, and lock down baselines (scope, schedule, cost). This reduces overall risk and uncertainty because more is known and addressed.
• At the same time, changes become more costly over time. Later changes can affect already approved baselines, cause rework, impact the critical path, require more coordination, and incur penalties or delays, all of which raise the cost of making changes.

• The legacy system creates a signed JWT assertion.
• Salesforce validates the assertion using a certificate configured on a Connected App.
• Salesforce issues an access token for the integration user.
• No refresh token is required; the system can request a new access token when needed.

• Web Server Flow: normally uses a client secret and authorization/refresh tokens.
• Username-Password Flow: requires storing Salesforce credentials and is discouraged for integrations where stronger options are available.
• User Agent Flow: intended for user-interactive applications, not unattended server-to-server processing.

• Post-Incident Review (A) is the after-action step used to capture lessons learned, identify process gaps, and drive improvements across the incident response lifecycle. This directly supports process maturity and a stronger security posture.
• Incident Analysis (D) focuses on investigating root causes during/after an incident, which is important but more of a diagnostic activity than a standalone baseline improvement to maturity.
• Fast Eradication (B) and Incident Containment (C) are tactical actions aimed at stopping the incident, not on maturing the process.

• A. A virtual network gateway
• D. A virtual network

• Azure virtual machines must be connected to an Azure virtual network (VNet). The VNet provides private IP addressing and network connectivity for the VMs.
• A virtual network gateway enables communication between the Azure VNet and the on-premises network, typically through a site-to-site VPN or ExpressRoute connection.

• Load balancer: Distributes traffic among Azure VMs; it does not connect Azure to an on-premises network.
• Application gateway: Provides web-application load balancing and Layer 7 routing; it is not the normal resource for on-premises connectivity.
• Gateway subnet: A gateway subnet is required inside the VNet when deploying a virtual network gateway, but the question’s intended two primary resources are the VNet and virtual network gateway.

• Cutover: The old system is replaced immediately. It may be fast, but any failure can cause significant disruption.
• Phased: The system is introduced in stages, which reduces implementation risk but may prolong the transition.
• Pilot: The system is first deployed to a limited group or location. This is useful for testing but does not necessarily minimize downtime for the entire organization.

• A assigned without var becomes a global variable (in non-strict mode). So after myFunction(), a = 5 is accessible.
• b is declared with var inside the function, so it’s local to that function (function-scoped). It’s not defined in the outer (global) scope.

• console.log(a) prints 5.
• console.log(b) throws a ReferenceError: b is not defined.

• Primary and core nodes: Use On-Demand Instances because the workload is business-critical. These nodes manage the cluster and store/process HDFS data.
• Task nodes: Use Spot Instances in an instance fleet. Task nodes are suitable for interruption because they do not hold essential cluster data and can be replaced or diversified across instance types.
• Terminate the entire cluster after processing: The job runs only about six hours each morning, and EMRFS stores data in Amazon S3. Keeping the cluster running for the rest of the day would waste money.

• A: Using Spot for primary and core nodes risks interruption of the critical cluster.
• C: All On-Demand is reliable but unnecessarily expensive; terminating the cluster helps, but Spot task nodes provide greater savings.
• D: Leaving primary and core nodes running after the task finishes continues to incur costs. Savings Plans also are less appropriate for this intermittent workload.

• The problem: Guest users can’t create posts in the Monthly Reports channel.
• The recommended fix (answer B): Modify the Guest access settings in the Teams admin center.

• Guest access settings control what guests are allowed to do across Teams (for example, posting, chat, and channel participation). If guests are restricted from posting, enabling the appropriate guest permissions will let them post in channels like Monthly Reports.
• The other options don’t directly change guest permissions in the way that affects posting:

• A — Custom Button: A button can launch a flow, typically by passing the flow’s URL and record context.
• D — From a Process: A Process can invoke a flow using an Apex action configured for flow invocation. However, this is automation-triggered, not directly accessed by a user.
• B — Quick Action: In current Salesforce functionality, a Flow Quick Action can launch a screen flow directly from a record page. This makes B a valid modern method.
• C — Visual Workflow Launcher: This is not generally listed as a standard access method in current Salesforce terminology; Salesforce commonly uses the Flow component on Lightning pages instead.

• Basic: Self-help only; no technical support or design assessment.
• Developer/Standard: Technical support, but generally not the full proactive architecture guidance required here.
• Professional Direct: Includes proactive guidance and architecture recommendations.
• Premier: Also supports this, but is not the minimum-cost option.

• Actual filename: Document.xml.txt
• Explorer displays: Document.xml
• File type: Text Document (.txt)

text 
Document.txt ? Document.xml

• Context: You’ve enabled auditing in Dataverse and need to trim audit data to free storage. The question asks which deletion options you can use.

• What the options typically mean:

• About the provided answer (A, C, D): The list includes “by column,” which isn’t a typical or supported way to purge audit data. The more plausible trio is A (by record), B (date range), and C (by table older than date). If the exam expects A, C, D, that seems incorrect or mis-stated in the source.

• Practical takeaway: To reduce audit storage, use per-record deletions, per-table purge by date, and/or date-range deletions as supported by the environment’s audit management UI or admin docs.

• Mesh: WAPs communicate wirelessly with one another, often to extend coverage without wired connections. It does not specifically describe centralized WLC management.
• Point-to-point: Connects two specific devices or locations.
• Ad hoc: Wireless devices communicate directly with one another without an access point.

• A — IDS attack signatures: An IDS generally detects suspicious network activity but does not necessarily scan uploaded PDF files or prevent them from being accepted.
• C — Load balancer: Distributes traffic among servers; it does not inspect files for malware.
• D — WAF command-injection blocking: A WAF can help block web attacks such as command injection, SQL injection, and cross-site scripting, but this option does not specifically address malicious PDF uploads.

1. Modify the database subnet NACL inbound rules to allow traffic from the new web subnet’s CIDR block on the MySQL port (3306).
2. Modify the database subnet NACL outbound rules to allow return traffic to the new web subnet’s CIDR block on the required ephemeral port range.

• Key difference: DirectQuery leaves data in the on-prem SQL Server and queries it live. That means every visual request can trigger online processing on the source, which can be slower and adds load on the on-prem system. In contrast, Import loads data into the Power BI data model, so visuals render from the in-memory engine (faster).

• Why that helps with the requirements:

• Why not A or B: Both rely on live data via DirectQuery, which contradicts the goal to minimize online processing and visuals performance.

• Why not D: It uses Import, but refreshing hourly adds unnecessary processing and complexity when daily refresh already satisfies currency needs.

• Startup scripts run at computer startup, before any user logs on, making them ideal for machine-wide configuration on each new VM.
• They execute under the Local System account, which is appropriate for initial setup tasks.
• Linking a GPO to the OU ensures every new VM in that domain automatically receives the configuration—great for scalability.

• A) SetupComplete.cmd runs only once, right after Windows Setup, not on every boot, so it isn’t ideal for provisioning multiple VMs consistently.
• B) Logon scripts run per user, not per machine, so they aren’t reliable for initial VM configuration before a user signs in.
• D) Placing scripts in a VHD doesn’t automatically execute them.

• Review the risk register.
• Use the previously defined risk response plan, such as assigning a backup resource, reprioritizing work, or using another qualified engineer.
• Implement the response promptly because the task is on the critical path.

• B: Revising the schedule without first applying the planned response may be premature.
• C: Excluding a required task could compromise the project’s objectives and requirements.
• D: Updating the risk and lessons learned records is appropriate, but it should happen after managing the immediate issue, not as the next primary action.

• The diagnostic output shows that the protocol is TCP (proto=6) and the session state is 2.
• In FortiGate’s session output, state=2 maps to SYN_SENT. This means the TCP SYN has been sent but the handshake hasn’t completed yet.
• Therefore, the session is not ESTABLISHED, FIN/ACK-related states, or other states; it’s in SYN_SENT.

• Recovery procedures actually work
• Recovery time and recovery point objectives can be met
• Staff understand their responsibilities
• Contact details, dependencies, and technical configurations are accurate
• Gaps or conflicts exist in the plan

• Not version-controlled: Creates a risk of using an outdated copy, but the plan might still be effective.
• Contact information needs updating: This is a specific weakness that can be corrected, often identified during testing.
• Not approved by senior management: Approval is important for authority and resource commitment, but an untested plan presents the most direct risk that recovery will fail when needed.

• Server — provides services or resources
• Endpoint — a user device connected to the network
• Ethernet — a networking technology, not a filtering device
• Firewall — filters and controls traffic

• administrators — Full access to switch configuration and REST API functions; excessive for this requirement.
• sysadmin — Intended for highly privileged system administration, not basic monitoring.
• helpdesk — More limited and focused on troubleshooting/support functions; it does not match the stated default role and level-1 requirement as directly.

• A — SCIM synchronizes changes to user attributes from the identity provider to GitHub.
• B — SCIM deactivates GitHub accounts when users are removed or deactivated in the identity provider.
• D — SCIM automates user provisioning when new users are added to the identity provider.

• C: SCIM does not delete organization repositories.
• E: SCIM does not generate REST API authentication tokens.
• F: SCIM handles identity lifecycle management, not repository permission configuration based on roles.

• Correct answer: only new data added to the eventhouse (option E).
• Why: When you enable OneLake availability for the eventhouse, OneLake starts syncing data going forward. It does not automatically backfill or copy over data that already exists in the eventhouse before the enablement.
• What that means in practice: Any data added to the eventhouse after you enable OneLake will appear in OneLake (and be visible from OneLake file explorer). Pre-existing data in the eventhouse stays there unless you perform a separate backfill/copy operation outside the standard OneLake enablement.
• How to verify: add a small new dataset to the eventhouse after enabling OneLake availability, then check OneLake to confirm the new dataset appears.

• This is a lookup relationship. Salesforce does not cascade access from a child (Opportunity) to its parent (Account) via implicit sharing.
• To view the Account, the user must have explicit access to the Account (via its OWD/sharing, or object permissions).

• The user has Read/View (or higher) on Account via profile/permission set.
• Manual sharing or a sharing rule grants that Account to the user.
• The Account is exposed by a broader permission like View All/Modify All on Account.
• Role hierarchy with Grant Access Using Hierarchies could grant access to Accounts owned by others, if applicable.

• Elicited and documented customer requirements
• Converted them into clear, measurable specifications
• Validated the requirements with the customer
• Used them as the basis for design, quality checks, and acceptance

• A: Requirements should reflect the customer’s needs—not the supplier’s standards.
• B: Iteration review planning does not replace proper requirements collection.
• D: A retrospective occurs after work is completed and is mainly for process improvement, not initial requirements definition.

• Issuer: Identifies the party issuing a SAML message, commonly the IdP in the SAML assertion. It is not the Salesforce setting used to distinguish Salesforce from other service providers.
• Identity Provider Login URL: Specifies where Salesforce sends users for authentication; it does not identify Salesforce.
• SAML Identity Location: Specifies where the user identity is found in the SAML assertion, such as the subject or an attribute.