SAP C_IEE2E_2404 Exam Prep
SAP Certified Associate - Implementation Consultant - End-to-End Business Processes for the Intelligent Enterprise (Page 3 )

• Documented and formally requested
• Analyzed for security, cost, and operational impact
• Reviewed and approved by the appropriate personnel
• Tested before implementation
• Tracked and reversible if problems occur

• Risk management process: Identifies and evaluates risk, but does not directly authorize design changes.
• Product design process: Applies primarily while creating or developing the product.
• Design review process: May have identified the issues, but the next step for changing an already released design is controlled change management.

• Active-active routers: Provide redundant Internet connections/devices. Both can operate, so traffic can fail over or be load-balanced.
• Active-active firewalls: Avoid a single firewall becoming a failure point while maintaining security inspection.
• Load balancers: Distribute requests across multiple web servers. If one server fails, traffic can go to the other.
• Redundant power supplies: A server with separate power supplies should connect to independent power sources or circuits.
• UPS A and UPS B: Provide backup power and redundancy. Ideally, each power supply is connected to a different UPS.
• SONET ring: A ring topology provides alternate paths if a fiber link or segment fails.

• MFA: Protects sign-in and authentication.
• Azure Key Vault: Protects deployment secrets and credentials.
• Answer: No (B).

• Future costs — Only costs occurring in the future can be affected by the investment decision. Past costs are sunk and irrelevant.
• Incremental costs — These are additional costs caused by choosing the investment. They are relevant because they differ between alternatives.
• Cash flows — Capital investment decisions are based on future cash inflows and outflows, usually discounted to present value.

• Committed costs have already been agreed or incurred and generally cannot be changed by the decision.
• Unavoidable costs will arise regardless of which option is selected, so they do not affect the choice.

• Assign endpoints to a group based on the result of one policy.
• Use that group as the scope of another policy.
• This effectively passes the endpoints from one policy’s processing flow to another.

• Each Case must follow defined support steps.
• Each step must be completed within a specified time limit.

• Case Escalation Rules: Escalate Cases based mainly on age or criteria; they do not model a complete sequence of service steps.
• Process Builder with Scheduled Actions: Can automate time-based actions but is not the standard framework for Case service-level commitments.
• Omni-Channel Routing: Routes work to agents based on capacity and priority; it does not track Case lifecycle deadlines.

• Espionage: Stealing information for intelligence or competitive purposes.
• Data exfiltration: Unauthorized removal or transfer of data.
• Nation-state attack: An attack sponsored or conducted by a government.
• Shadow IT: Unapproved technology or methods used to access organizational resources.

• Accept: Acknowledging the risk and choosing not to take additional action.
• Transfer: Shifting the risk or financial consequences to another party, such as an insurer.
• Mitigate: Reducing the likelihood or impact through controls, such as patching or access restrictions.
• Avoid: Eliminating the activity that creates the risk.

Why this is correct

• Each user authenticates with their own Google account.
• Google manages the user’s SSH key association.
• IAM controls who can access instances.
• Access can be audited by user identity, so security can determine who accessed a VM.
• Granting the role to a Google group avoids managing permissions individually.

Why the others don’t apply

• A: A shared private key is difficult to distribute securely and cannot reliably identify which employee used it.
• B: Manually collecting and deploying keys on every instance is operationally inefficient and complicates auditing.
• D: A project-wide shared key has the same identity and key-management problems as option A. It also does not provide per-user accountability.

• DB1 (500 TB): Azure Data Box Heavy

• Virtual machines: Azure Migrate

• Keep earlier prompt versions.
• Identify the last version that produced acceptable output.
• Restore it as a baseline.
• Make small, controlled changes—ideally one significant change at a time.
• Test the output after each change.

• A: Discards useful information about what worked.
• B: Large simultaneous changes make it difficult to identify the cause of problems.
• D: Accepts output that does not meet the requirements.

• Understating expenses and liabilities
• Overstating profit
• Misleading users of the financial information
• Potentially breaching integrity, objectivity, and professional competence and due care

• 50% memory utilization baseline: The environment can be provisioned with excess capacity, leaving room for growth and workload spikes.
• Storage scalability: Cloud storage can generally be expanded as needed without redesigning the physical platform.
• Single circuit failure resilience: A properly designed IaaS provider uses redundant power circuits and infrastructure, so failure of one circuit should not take the platform offline.

• A — Dual PDUs: Helps with power redundancy but does not provide storage scalability.
• C — Network load balancing: Provides network-path resilience, not memory or storage scalability, and does not address a power-circuit failure.
• D — Multiple NAS devices: May improve storage capacity, but does not inherently provide power resilience or the required compute-capacity baseline.

1. The original app version exists.
2. You create and publish a new version, so there are now two versions.
3. When you restore the previous version, Power Apps does not delete or overwrite the newer version. Instead, it creates another version based on the restored one.

• Original version
• Newly created and published version
• New version created by the restore operation

• VPC: A logically isolated virtual network within a cloud provider; it describes network design, not the user-access model.
• NFV: Runs network services as software instead of on dedicated hardware.
• SaaS: Delivers software over the internet. Although the application may be delivered as SaaS, the question emphasizes its availability to multiple user groups, which points to multitenancy.

• Controlar o fluxo de dados entre S3 e SageMaker;
• Aplicar regras de segurança por meio da VPC;
• Reduzir a exposição dos dados;
• Permitir acesso privado ao bucket do S3.

• Amazon Inspector: avalia vulnerabilidades, mas não gerencia o fluxo de dados.
• Amazon Macie: ajuda a descobrir e proteger dados sensíveis no S3, mas não cria a conexão com o SageMaker.
• S3 Glacier Deep Archive: é uma classe de armazenamento para arquivamento, não uma solução de conectividade.

• Reconnaissance: Gathering information about the target.
• Weaponization: Creating or combining a malicious payload with a delivery method.
• Delivery: Sending the payload, such as through phishing.
• Exploitation: Triggering a vulnerability or weakness to gain execution or access.

• No servers or database infrastructure to provision.
• Uses standard SQL.
• Supports formats such as JSON, CSV, Parquet, and ORC.
• You typically define the table structure with AWS Glue Data Catalog or Athena’s own schema definitions.
• Charges are generally based on the amount of data scanned, so partitioning and columnar formats can reduce cost.
• It does not copy the data into a separate database; it reads the files in S3 when you run a query.

• Disabling a compromised account
• Blocking a malicious IP address
• Isolating an endpoint
• Creating or escalating an incident ticket

• Virus signatures: Primarily associated with antivirus or endpoint protection.
• Security agent deployment: Usually handled by endpoint-management or security-agent platforms.
• Vulnerability scanning: Typically performed by vulnerability-management tools.

• Amazon S3 as the origin for static content
• Application Load Balancer (ALB) as the origin for dynamic content
• Amazon Route 53 configured to point the company’s domain name to CloudFront

• /static/* ? S3 origin; cache content at edge locations
• Dynamic paths such as /api/* ? ALB origin; forward requests to the EC2 application

• C — Some risks cannot be eliminated.

• D — Accepting residual risk does not imply recklessness.

• E — Most companies in this industry will say something similar.

• Namespace: The namespace associated with the code where the checkpoint was set.
• Time: When the checkpoint was captured or executed.

• Exception: Exceptions are viewed through debug logs or execution results, not as the primary Checkpoints tab information.
• Debug Statement: System.debug() output belongs in the Logs tab. A checkpoint captures program state, such as variables and their values, at a specific point in execution.

1. Append Table1 and Table2 as a new query

1. Select the product column in the appended query.

1. Choose Remove Rows > Remove Duplicates

1. Select Exchange email as a location.
2. Use the built-in Azure Storage Account key sensitive information type as the condition.
3. Configure the DLP action to encrypt the email—for example, using Microsoft Purview Message Encryption.

• Accept terms of use
• Enter a temporary code or credentials
• Provide basic registration information

• Enterprise authentication — Authenticates organizational users, often with centralized identity services; it is not specifically designed for temporary guest access.
• Ad hoc network — A temporary device-to-device network, not an authentication process.
• WPA3 — A wireless security standard. It protects Wi-Fi access but does not provide the web-based temporary access workflow described here.

• Due diligence: Investigating and evaluating a third party before entering into or continuing a business relationship.
• Attestation: An independent party provides assurance about an organization’s claims or controls. A SOC 2 examination is an example of an attestation engagement, but the analyst requesting and reviewing the report is performing due diligence.
• Internal audit: Reviews the organization’s own internal controls.
• Penetration testing: Actively tests systems for exploitable vulnerabilities.

• The requirement is to obtain an assessment of the Azure environment’s design.
• The proposed solution is the Premier support plan.
• Premier can provide this type of guidance, but it is a higher-tier, more expensive option.
• The question specifically says to keep costs to a minimum. A lower tier—typically Professional Direct in the support-plan model used by this question—provides architectural/design guidance.

• D — Value analysis: Correct. It examines an existing product to identify ways of reducing its cost while still providing the required functions, quality and reliability.
• E — Kaizen costing: Correct. It involves making continuous, small improvements and cost reductions while the product is already in production.

• Functional analysis: It is not limited to minimizing the cost of the originally defined functions. It examines what functions are required and how they can be provided at the lowest overall cost.
• Value engineering: Usually applies to the design and development of a new product, rather than being a fundamental redesign of existing organisational processes. That description is closer to business process re-engineering.
• Target costing: The target cost is generally established during the product development stage, before production begins. It is not continuously reset while the product is in production.

• Create the field in the CRM on the relevant person records—typically Lead and Contact in Salesforce.
• Give the Marketo Sync User read/write access to the field.

• CCTV system — Detective control: Cameras monitor and record activity, helping identify or investigate security incidents after—or while—they occur.
• Signs about being filmed — Deterrent control: The signs discourage people from attempting unauthorized or criminal activity because they know surveillance is present.

• Preventive: Stops an incident from occurring, such as a lock or access-control system.
• Corrective: Restores systems after an incident.
• Directive: Instructs people to behave in a certain way, such as a security policy.
• Compensating: Provides an alternative control when the preferred control cannot be implemented.

• SQL injection
• Cross-site scripting (XSS)
• Malicious or malformed web requests
• Some application-layer abuse

• Layer 4 firewall: Filters based mainly on IP addresses, ports, and connections; it lacks detailed web-request inspection.
• NGFW: Provides broader network security, but a WAF is more specialized for protecting web applications.
• UTM: Combines multiple security functions, but it is not necessarily optimized for web-application protection.

• Maintain head office control: Transfer pricing generally supports decentralisation rather than direct head-office control.
• Establish centralised decision making: This conflicts with divisional autonomy.
• Develop a top-down culture: Transfer pricing is intended to support empowered divisions and goal congruence, not impose purely top-down management.

• Constrained VMs: VMs whose workloads are experiencing resource pressure, such as insufficient CPU or memory. They may need additional resources or optimization.
• Overprovisioned VMs: VMs allocated more CPU, memory, or storage than their workloads require. Their resources may be reclaimed or reduced.

• Underprovisioned VMs: This is not the predefined view identified for this report question.
• Zombie VMs: These are typically inactive or unused VMs and are useful for cleanup, but they are not the two views specifically intended here to identify inefficient resource allocation.

• A. IDS attack signatures: An IDS primarily detects suspicious network activity; it is not the best tool for scanning uploaded files.
• C. Load balancer: Improves availability and distributes traffic but does not inspect files for malware.
• D. WAF: Protects web applications against attacks such as SQL injection and command injection. It may inspect HTTP requests, but malware scanning of uploaded PDFs is the key requirement here.

• Data Cloud combines data from multiple systems.
• It resolves and organizes that data into a unified customer view.
• That unified view enables downstream actions such as personalized campaigns, segmentation, analytics, and activation.

• A = core platform value
• D = a resulting business use case or benefit

• CSIRT: A team that responds to and manages security incidents.
• CVSS: A scoring system for rating the severity of vulnerabilities.
• SOAR: A technology platform for automating and coordinating security operations and incident response.

• A password cracker would normally be identified by behavior such as loading password hashes or attempting dictionary/brute-force attacks.
• The question describes a routine audit, not password recovery.
• Simply encountering a protected file during an audit is characteristic of a misconfigured or insufficiently privileged FIM.

• Streams — track change data for tables or views.
• External tables — reference data stored in an external cloud storage location.

• Role — account-level security object.
• Warehouse — account-level compute resource.
• User — account-level security object.
• Share — account-level object used to share data.

• Advanced Persistent Threat (APT): A sustained, targeted attack campaign or attacker group—not a vulnerability.
• Trojan: Malware disguised as legitimate software.
• Stealthware: A general term for malware designed to avoid detection; it does not specifically mean an unknown vulnerability.

• Packet capture: Collects and analyzes network traffic; it does not describe the scan type.
• Privilege escalation: Attempts to gain higher permissions after obtaining access.
• System enumeration: Identifies systems, services, or resources, but is not specifically defined by the lack of credentials.
• Passive scan: Observes traffic without actively probing systems. A vulnerability scan is generally an active assessment.

• B — Data source settings in Power BI Desktop:

• D — Formula bar in Power Query Editor:

m 
  Excel.Workbook(File.Contents("new path"))

• E — Advanced Editor in Power Query Editor:

• A: Dataset settings in the Power BI service mainly handle credentials and gateway settings, not changing the local file path embedded in the PBIX.
• C: Current File data-load settings control refresh/load behavior, not the source location.

• A — .gitignore: Controls Git tracking; it does not configure Copilot exclusions.
• B — copilot.ignore: This is not the standard GitHub Copilot Business exclusion mechanism.
• D — Renaming files: Adding _no_copilot has no recognized effect.

• You can configure different pre-shared keys for different device groups.
• All cameras could use one key.
• All scanners could use another key.
• Each key can be associated with an appropriate role or access policy.

• C — Create a form extension and implement validation

• D — Use Chain of Command (CoC) with a form extension class

• If the hashes match, the software has likely not changed.
• If they differ, the software was modified or corrupted.

• Encryption: Protects confidentiality by making data unreadable; it does not primarily verify that software was unchanged.
• Baselines: Establish expected configurations or states, but hashing is the specific method for checking file integrity.
• Tokenization: Replaces sensitive data with non-sensitive tokens and is unrelated to software integrity.

• Correct exam answer: A — HKEY_LOCAL_MACHINE
• The relevant location is associated with HKEY_LOCAL_MACHINE\SAM.
• The SAM does not store passwords in plain text; it stores password hashes.

• HKEY_CURRENT_USER contains settings for the currently logged-in user, not the account-password database.
• HKEY_USERS contains user profiles and settings loaded for users.
• HKEY_CURRENT_CONFIGURATION contains hardware/profile configuration information.

• New investment: $536,500
• Resulting NPV: $0

• Highly polished, organization-wide presentations
• Advanced dashboard design and customization
• Broader business-user distribution and interaction
• Specialized BI governance and modeling features

• Deterrent control: The signs warning that people may be filmed can discourage unauthorized or malicious activity. They do not directly stop the action; they influence behavior.
• Detective control: CCTV records or monitors activity so security personnel can identify events or investigate them afterward.

• Preventive: Stops an incident from occurring, such as access control.
• Corrective: Restores systems after an incident.
• Directive: Instructs people to behave in a certain way, such as a security policy.
• Compensating: An alternative control used when the preferred control is not feasible.