SAP C_SACS_2308 Exam Actual Questions
SAP Certified Application Associate - SAP Analytics Cloud Story Design (Page 4 )

• Answer: No.

• Why it doesn’t meet the goal:

• How to implement correctly (brief guidance):

• Answer: C — 192.168.0.0/25 as summary and 192.168.0.0/27 for each floor

• Why:

• Leadership and stakeholder commitment
• Business capability and skills
• Organizational culture
• Availability of resources
• Ability to manage and sustain change
• Impact of the proposed transformation

• How ready the organization is
• Which areas require urgent attention
• How difficult each issue may be to resolve
• Risks that could affect implementation

• A: Places the assessment in Phase B and refers vaguely to creating views; this is not the prescribed technique.
• B: An Implementation Factor Assessment and Deduction Matrix is not the primary TOGAF technique described for business transformation readiness.
• D: A Business Scenario helps identify requirements and stakeholder concerns, but it is not the main technique for assessing organizational readiness.

• Correct answer: only new data added to the eventhouse (option E).
• Why: When you enable OneLake availability for the eventhouse, OneLake starts syncing data going forward. It does not automatically backfill or copy over data that already exists in the eventhouse before the enablement.
• What that means in practice: Any data added to the eventhouse after you enable OneLake will appear in OneLake (and be visible from OneLake file explorer). Pre-existing data in the eventhouse stays there unless you perform a separate backfill/copy operation outside the standard OneLake enablement.
• How to verify: add a small new dataset to the eventhouse after enabling OneLake availability, then check OneLake to confirm the new dataset appears.

• RPO (Recovery Point Objective) — maximum acceptable data loss, measured in time. It specifies how far back in time you can tolerate data loss. Example: RPO of 2 hours means backups must occur at least every 2 hours.

• ARO (Annualized Rate of Occurrence) — expected frequency of a threat occurring per year. It estimates how often a risk is likely to happen on average (used in risk calculations).

• MTTR (Mean Time To Recover) — average time to recover/restore service after an incident. It includes detection, repair, and restoration time, and helps gauge downtime and alignment with RTO.

1. Download the updated VPN client configuration package from the Azure VPN gateway.
2. Remove or update the existing VPN client configuration on the Windows 10 workstation.
3. Install the new package and reconnect.

• Correct answer: A
• What this is saying: You need to write a Transact-SQL query that uses REGEXP_SUBSTR to extract the ID from MessageText, and you should apply STRING_ESCAPE(MessageText, 'json') before calling REGEXP_SUBSTR.

• MessageText may contain JSON characters (quotes, backslashes, etc.). Escaping the JSON content first ensures the string you pass to the regex is safe and won’t confuse the regex engine.
• The pattern you apply with REGEXP_SUBSTR would then extract the first substring that matches your ID pattern from the (escaped) text.

• Example (conceptual):

• The question implies REGEXP_SUBSTR is available in this environment; some SQL Server and Fabric contexts don’t expose it natively in all versions. If REGEXP_SUBSTR isn’t available, you’d need an alternative approach (e.g., using built-in regex-like capabilities or CLR/UDFs).
• If you need the ID specifically from the first paragraph, you might first isolate the first paragraph and then apply REGEXP_SUBSTR, or compose a single pattern that anchors to the first paragraph.

• The answer: Question 51: C — Request trigger.

• To invoke a Logic App from an external service (here, the Azure Application Insights availability test) you need a trigger that starts on an incoming HTTP request. In Logic Apps, this is the trigger that exposes an HTTP endpoint — typically shown as "When a HTTP request is received" and referred to as the Request trigger.
• The other options aren’t appropriate:

• Create a Logic App with the Request trigger to generate a URL.
• Configure Application Insights to post the degraded-availability payload to that URL.
• Add actions (e.g., send email, follow-up) in the Logic App to notify the customer services team.

• Event | search "error"
• Event | where EventType == "error"
• search in (Event) "error"

• Amazon Cognito is designed for customer-facing apps to handle user sign-up, sign-in, and access control, and it can federate identities from social providers (Facebook, Google, etc.) or enterprise IdPs via SAML/OpenID Connect.
• You can configure a Cognito User Pool and connect social identity providers, then use tokens (JWT) to authorize backend API calls.

• AWS Directory Service is for connecting your AWS apps to an existing directory (like Active Directory) for enterprise users, not social login for customer apps.
• AWS IAM is for managing access to AWS resources, not end-user authentication for your website.
• AWS IAM Identity Center (AWS SSO) provides SSO for AWS accounts and enterprise apps, not typical social logins for consumer-facing websites.

• Correct answer: D) Microservices using API

• Why:

Why B works

• AWS KMS keys are Regional resources. A normal customer managed key in Region A cannot be used directly in Region B.
• A customer managed multi-Region KMS key (MRK) has related key replicas in both Regions. The replicas share key material and key ID, although each has a Regional ARN.
• With client-side encryption, the application encrypts the data before storing it in S3. Cross-Region replication then copies already-encrypted objects, so S3 does not need to decrypt and re-encrypt them with a different Regional key.

Why the other choices are weaker

• A and C: SSE-S3 uses Amazon-managed S3 keys, not the required customer managed KMS key.
• D: SSE-KMS can work only if the solution creates and configures the appropriate KMS key or multi-Region key replica in each Region. As written, it says to create a customer managed KMS key in each Region, which implies separate keys—not the same KMS key. Replication also requires additional KMS permissions and destination encryption configuration.

• What the HOTSPOT is testing

• The actual action you need on HyperV1

• Typical commands you’d use (depending on OS version)

• Why this matters for Q6

• Quick validation steps

• Correct answer: UBA (A)

• Why: UBA (User Behavior Analytics) analyzes user activity, builds baselines of normal access patterns, and flags deviations (e.g., accessing sensitive projects not related to the user’s role). This insider-threat detection is exactly what the scenario requires.

• Why not the others:

• Correct answer: A — a clear business case has been established.

• The audit focus for IT procurement is ensuring there is a solid economic justification for the investment. A clear business case documents the expected benefits, costs, risks, and alignment with strategic objectives, which governs whether the investment is worth pursuing.
• The other options are important controls or project aspects, but they are secondary to ensuring the investment is justified financially and strategically:

• Correct choice: Box 1 = Yes, Box 2 = Yes, Box 3 = No (Answer: A)

• Box 1: Yes – Microsoft Purview Compliance Manager provides a risk-based compliance score that helps you understand your overall compliance posture. The score reflects how well you’re meeting regulatory requirements and internal policies.
• Box 2: Yes – It also offers step-by-step remediation guidance through actionable “improvement actions.” These guide you to implement fixes and align controls, often with links to the relevant consoles.
• Box 3: No – Compliance Manager is not part of Microsoft Defender. It is part of Microsoft Purview. Defender is a separate security product family, while Compliance Manager is in Purview for compliance risk and remediation.

• Use Purview Compliance Manager to view your compliance score and follow improvement actions.
• Improvement actions provide actionable steps and guidance for remediation.
• Defender and Purview are distinct services; do not confuse their scopes.

• The correct answer is A: CCTV recordings are not regularly reviewed.

• CCTV is a monitoring/control mechanism. If recordings aren’t reviewed, security events (break-ins, policy violations, equipment tampering) can go undetected and unaddressed.
• Regular review is essential for deterrence, incident response, and forensic evidence. Without it, the entire CCTV control provides little value.

• B (records deleted after one year) affects forensic availability, but it’s a data-retention issue rather than the ongoing effectiveness of the surveillance program.
• C (footage not recorded 24x7) creates gaps in coverage, which is a concern, but regular review of available footage still supports detection; 24x7 coverage is a separate policy/perimeter issue.
• D (cameras not in break rooms) is more about privacy and space planning than core data-center security monitoring.

• According to the provided answer key, the four options are: Upload File, User Criteria, HR Profiles, HR Criteria (options B, D, F, G).

• Upload File: Filter by a file you upload (e.g., CSV) that provides data for bulk case creation.
• User Criteria: Filter by criteria related to users (e.g., role, department) to select target users.
• HR Profiles: Filter by HR profile data associated with users.
• HR Criteria: Filter by HR-related criteria or attributes.

• Amazon GuardDuty: Detects suspicious activity and threats using security-related data sources; it is not primarily a software vulnerability scanner.
• Amazon Detective: Helps investigate and analyze the root cause of security findings after an event.
• Amazon Cognito: Provides user authentication and authorization for applications.

• A? ??? Aurora Replicas? ?? ??? ???? ?? ???, ?? ???? Network Load Balancer(NLB)? ??????. NLB? ?? 4 ?? ???? HTTP ??? ?? ???(Sticky sessions)? ????? ???? ????.
• ??? ?? ??????? ?? ?? ???? ??? ???? ?? ????? ????? ?? ?? ???(?? ?/??? ??)? ?????. ? ??? ALB?? ?? ????, NLB?? ???? ?????.
• ??? ??? ??? ??? ???? ?? ???? ???? HTTP ???? ??? ALB? ???? ???. A? ? ??? ??????.

• '15' is a string. With + and a string, JavaScript does string concatenation: '15' + 10 -> '1510'.
• The result '1510' is then used in a multiplication: '1510' 2. The operator triggers numeric conversion, so '1510' becomes the number 1510.
• 1510 * 2 = 3020.

• If the code were let x = (15 + 10) * 2, the result would be 50 since 15 + 10 is numeric addition.

• Recovery procedures actually work
• Recovery time and recovery point objectives can be met
• Staff understand their responsibilities
• Contact details, dependencies, and technical configurations are accurate
• Gaps or conflicts exist in the plan

• Not version-controlled: Creates a risk of using an outdated copy, but the plan might still be effective.
• Contact information needs updating: This is a specific weakness that can be corrected, often identified during testing.
• Not approved by senior management: Approval is important for authority and resource commitment, but an untested plan presents the most direct risk that recovery will fail when needed.

• The stage has a default file format defined (e.g., when you create the stage with FILE_FORMAT = (...)), and Snowflake will use that default.

• You use a named file format attached to the stage, or you specify an inline format in the COPY command, e.g., COPY INTO my_table FROM @my_stage FILE_FORMAT = (TYPE = 'CSV');

• Use a stage default: omit FILE_FORMAT in COPY.
• Or rely on a named/inline format: specify FILE_FORMAT in COPY or set a format on the stage.

• State is stored remotely in Terraform Cloud/Enterprise, not as a local file.
• Terraform runs (plan/apply) can be executed on remote infrastructure, with results visible in the remote workspace UI.
• Supports workspace-based organization, state locking, and concurrency control.
• Useful for team collaboration, centralized governance, and auditable logs.

• In your configuration, you use a backend block like backend "remote" { ... }.
• You still run terraform init to configure/migrate to the remote backend.
• After setup, terraform plan/terraform apply may be executed remotely, and the outputs/logs appear in the Terraform Cloud/Enterprise UI rather than (only) in your local terminal.

• Other backends store state remotely but typically do not provide remote execution; with the remote backend you get remote runs and a collaborative UI, not just remote state storage.

• Co to znaczy: transakcje zachowuja sie tak, jakby byly wykonywane jeden po drugim. Dzieki temu nie ma brudnych odczytów, niepowtarzalnych odczytów ani phantom reads.

• Implementacja: PostgreSQL uzywa SSI (Serializable Snapshot Isolation). W praktyce oznacza to, ze jesli wykryje konflikt miedzy transakcjami, jedna z nich zostanie zakonczona bledem “serialization failure” i trzeba ja ponowic.

• Zalózmy tabele orders(customer_id int, amount int).

• Transakcja T1:

• Transakcja T2, równoczesnie:

• T1 ponownie wykonuje to zapytanie:

• VPC: A logically isolated virtual network in a cloud environment; it describes networking, not shared application access.
• NFV: Replaces dedicated network appliances with virtualized network functions.
• SaaS: A cloud service model in which users consume an application without managing its infrastructure. It could describe how the application is delivered, but the question emphasizes serving multiple user groups, which points to multitenancy.

• Goal: serving a static website globally with minimal latency.
• Why C works: CloudFront is a Content Delivery Network (CDN) that caches content at many edge locations around the world. When users request the site, CloudFront serves cached copies from the nearest edge location, greatly reducing latency. It also reduces load on your EC2 origin by handling many requests at the edge.
• Why the other options aren’t as good:

• VMs without NGT: Not clearly a migration blocker on its own; NGT (Nutanix Guest Tools) status isn’t the typical gating factor for live migration during maintenance.
• VMs marked as an Agent: Not a standard, widely-known migration blocker; agents aren’t the typical reason a VM can’t be migrated.
• Memory Overcommitted VMs: While memory pressure can affect placement, memory overcommitment isn’t a fundamental reason a VM would be labeled non-migratable during maintenance.
• VMs with attached Volume Groups: This is the strongest candidate. A Volume Group is a set of volumes bound to a VM; moving the VM would entail relocating and reattaching those volumes, which can complicate or block live migration during maintenance.

• The question asks why some tasks appear locked in the HR Guided Setup Module’s Task view.
• The options are:

• C) They require other tasks to be completed first. In guided setup flows, tasks are usually gated by prerequisites to ensure proper sequencing and data/configuration dependencies. You typically unlock a task only after the necessary preceding tasks are finished.

• A) Elevated roles can restrict access in some contexts, but guided setup tasks are commonly gated by prerequisites rather than solely by role.
• B) Deprecation isn’t the general pattern for “locked” tasks in the guided setup.
• D) A plugin activation could unlock certain features, but the common gating mechanism is task dependencies, not plugin state.

• The page shows the answer as D, but based on how HR Guided Setup usually works, the more accurate reason is typically C (prerequisites). If you’re studying, treat C as the conceptual answer and be aware the listed key may be incorrect. If you want, I can walk through each option in more detail.

• The correct answer: C. Tokenization

• Why:

• Why the others are weaker:

• Strongest encryption algorithms: Choose the strongest available encryption and integrity options, typically AES with the largest key size and a secure integrity algorithm.
• Encrypt all traffic: Select tunnel mode rather than transport mode. Tunnel mode encrypts the entire original IP packet, which is appropriate for a site-to-site VPN between branch networks.
• Secret-password authentication: Configure a pre-shared key (PSK) on both VPN concentrators. The key must match at both ends.

• Core idea: Diffie-Hellman (DH) by itself only establishes a shared secret; it does not authenticate who you’re talking to. If the exchange is unauthenticated, it’s vulnerable to a man-in-the-middle (MITM) attack.
• How MITM works in this context: An attacker intercepts the DH public values exchanged by the two legitimate parties and substitutes their own values. Each party then ends up with a shared secret with the attacker, not with the intended peer.
• Consequences: The attacker can decrypt, read, and possibly modify messages between the two parties, all without either party realizing.
• Why the other options are not correct:

• Correct answer: S3 Versioning

• Why the other options aren’t suitable for this protection:

• Quick tip: For enhanced protection, enable Versioning (and consider related features like Object Lock for write-once scenarios in specific compliance cases).

• DNS????????????????

• ???????????

• ????????????????

• Answer: A — EC2 Image Builder

• Why: EC2 Image Builder is AWS’s fully managed service designed to automate the creation, testing, and ongoing management of custom EC2 AMIs. It lets you build image pipelines that start from a base image, apply software/components, run tests, and publish/distribute the resulting AMIs across regions or accounts.

• How it works (high level):

• Why not the other options:

• Quick tip: Use EC2 Image Builder to reduce manual image maintenance and drift, and to enforce consistent, tested base images across environments.

• Increase/decrease the number of epochs: Changes how long training runs, but does not reuse a pre-trained model.
• Unsupervised learning: Trains from unlabeled data and does not specifically address adapting an existing model.

• Answer: False. The page marks the answer as B, which corresponds to False.

• The Import Wizard in Salesforce is designed for importing a subset of objects, typically including Accounts, Contacts, Leads, and Campaign Members.
• Opportunities are not supported by the Import Wizard. To import Opportunity records, you should use Data Loader or the API (for larger volumes or more complex mappings).
• Practical tip: If you need to bring in opportunities, create or link to the related Account first, ensure required fields like StageName and CloseDate are included, and use Data Loader (or a similar tool) to insert or upsert the data.

• Statement 1: Admin1 must approve requests for the Agent ID Developer role — No

• Statement 2: Admin2 can approve requests for the AI Administrator role — No

• Statement 3: Admin3 can assign User1 a two-day active assignment for the Agent ID Developer role — Yes

• Is goal ke liye aksar Azure Site Recovery (ASR) use hota hai.
• Sab se pehle jo object create kiya jata hai: Recovery Services vault. Ye vault ASR ki sari settings aur replication ko manage karta hai.
• Is vault ke andar aap create karte hain: Replication policy (jo RPO etc. define karta hai) aur Protection group (jisme multiple VMs ko ek saath replicate kiya jata hai).
• On-prem Hyper-V server ko ASR provider ke zariye vault me register karna hota hai, phir VM1 ko select karke replication ke liye add kiya jata hai.

• Assign a Teams license to a user — Licenses are assigned through the Microsoft 365 admin center, Microsoft Entra ID, or PowerShell.
• Deploy the Teams client — The Teams admin center manages Teams policies and apps, but it is not the primary tool for deploying the desktop client.
• Prevent users from creating teams — Team creation depends on controlling the creation of Microsoft 365 groups, generally configured through Microsoft Entra ID and PowerShell rather than directly in the Teams admin center.

• Most recent update: orders results by the date the article was last updated (newest first).
• Relevancy: orders results by how closely articles match your search terms.
• Number of views: orders results by how often an article has been viewed (popularity).

• Popularity is not a standard separate sort option in Knowledge Base (the related concept is typically covered by “Number of views”).
• Manager assignment has no bearing on how Knowledge Base results are ranked.

• In the AWS shared responsibility model, AWS manages the security of the “infrastructure,” including the physical hardware and underlying virtualization.
• The customer is responsible for everything else in the cloud stack: the guest OS on EC2, the NoSQL database software running on it, data, patching the OS, and configuring access controls like security groups.
• So, for a self-managed NoSQL database on EC2, AWS would handle the physical hardware, while you would patch the guest OS and manage DB availability, backups, and security.

• What it says: you can add a cost when you adjust inventory, and that cost is posted automatically to a specific GL account.
• Reality: yes, you can adjust both quantity and value via an inventory adjustment journal. The cost on the journal line affects the inventory value.

• The general ledger postings are not arbitrary. the actual accounts used are determined by your item posting group and the system’s posting definitions. In practice, the adjustment debits/credits the appropriate inventory-related accounts (e.g., Inventory asset and a related offset such as an adjustment or COGS account) based on configuration.
• So, the cost change does not go to a single “manual” GL account you pick per line unless your posting setup maps to that account.

• The concept is true (you can adjust cost and have GL impact), but the claim that it posts to a single, specific GL account is oversimplified—the accounts come from your posting configuration.

• Correct answer: A: The ITIL service value system (SVS).

• The SVS explains how all components (governance, the service value chain, practices, guiding principles, information and technology, partners and resources, and continual improvement) work together to enable value creation from demand to outcomes.

• B: The ITIL guiding principles describe aspirational guidance for decision-making, not how all components/activities interact.
• C: The four dimensions of service management explain areas to consider (organizations/people, information/technology, partners/suppliers, value streams/processes) but don’t describe the integrated system itself.
• D: A service relationship defines the relationship between provider and consumer, not the overall system of components and activities creating value.

• In ServiceNow, each customer typically gets their own instance (prod, dev, test). This means the architecture is multi-instance, not a single instance.
• A single-instance, multi-tenant setup would be one shared instance serving many tenants. ServiceNow uses separate instances per customer (data and configuration isolated per tenant), so it is not a single-instance, multi-tenant architecture.
• In practice: you access a customer’s instance like customerA.service-now.com; other customers have their own distinct instances. The platform code is shared, but the data/configuration are isolated per instance.

• IaaS provides virtualized infrastructure, including VMs, disks, and networking. You manage the guest operating system and software installed on the VM.
• PaaS provides a managed platform for deploying applications without managing the underlying VMs or operating systems. Examples include Azure App Service and Azure Functions.

• Catalog Items are the basic units users can request from the Service Catalog.
• Order Guides are bundles that group related catalog items so a user can place multiple items in one order.
• Record Producers are catalog items that, when submitted, create a new record in a specified table (for example, creating a new Incident or a custom record).

• Automation handles repetitive tasks, and orchestration coordinates responses across tools (SIEM, SOAR, EDR, etc.).
• This allows the security team to process more events with the same number of people, improving throughput and response times.
• Analysts can focus on more complex tasks like investigation and threat hunting instead of manual triage.

• It increases complexity: automation can reduce complexity when well-implemented; complexity is not the main intended benefit.
• It removes technical debt: automation/OR focuses on current incident response efficiency, not primarily on architectural debt.
• It adds additional guard rails: governance is important but not the core value of automation/orchestration within a SIEM.

• B. Enable column profile — This turns on column profiling, which computes statistics like min and max for each column.
• C. Show column profile in details pane — This ensures the per-column profile is visible in the details pane.
• E. Enable details pane — This makes the details pane available so you can view the column profile there.

• A. Show column value distribution may help with distribution but isn’t specifically about min/max.
• D. Show column quality details shows data quality (valid/null counts), not min/max.