SAP C_THR70_2309 Exam Actual Questions
SAP Certified Application Associate - SAP SuccessFactors Incentive Management (fka SAP Commissions) (Page 3 )

• Cutover: The old system is replaced immediately. It may be fast, but any failure can cause significant disruption.
• Phased: The system is introduced in stages, which reduces implementation risk but may prolong the transition.
• Pilot: The system is first deployed to a limited group or location. This is useful for testing but does not necessarily minimize downtime for the entire organization.

• Goal: Guests should not use cameras, but company users can.
• Correct configuration: Guest access settings in the Org-wide settings.

• External access: Controls external-domain communication, not guest capabilities inside Teams.
• Teams settings in Org-wide settings: Too generic; doesn’t specifically target guest capabilities.
• Audio & Video in the default Meeting Policy: Would affect everyone assigned to that policy. To meet the requirement without impacting internal users, you’d need separate policies or guest-specific settings; the exam focuses on the guest-access policy.

• Port 515: LPD/LPR line-printer service
• Port 631: IPP — Internet Printing Protocol
• Port 9100: JetDirect/RAW printing, commonly used by network printers

• Linux machine: Linux could run these services, but the three printer-specific ports strongly indicate a printer.
• Router: Routers may use Telnet and HTTP, but normally would not expose ports 515, 631, and 9100 together.
• Windows machine: Windows can share printers, but this particular service combination is more characteristic of a network printer’s embedded operating system.

• Options:

• Answer: The correct choice is A (800-61r3).

• NIST SP 800-61 Rev. 3 is the dedicated guide for incident handling/response and reflects the latest guidance on the incident response lifecycle (preparation, detection/analysis, containment, eradication, recovery, post-incident activity).
• 800-61r2 is an older revision of the same incident response guide.
• 800-53 covers security and privacy controls, not a specific incident response standard.
• 800-171 focuses on protecting CUI in non-federal systems and networks, not incident response guidance.

• Correct answer: All four statements are true (A, B, C, and D). The given key (A,B) is likely incorrect.

• A) Customers can change the size of the Warehouse after creation — Yes. You can resize a virtual warehouse after it’s created using ALTER WAREHOUSE ... SET WAREHOUSE_SIZE.
• B) A Warehouse can be resized while running — Yes. Snowflake supports online resizing; you can change the size without stopping queries.
• C) A Warehouse can be configured to suspend after a period of inactivity — Yes. You can enable auto-suspend with a delay (AUTO_SUSPEND).
• D) A Warehouse can be configured to auto-resume when new queries are submitted — Yes. You can enable auto-resume (AUTO_RESUME) so a suspended warehouse automatically resumes on new queries.

• Example commands:

• Even if a warehouse is resizing or auto-suspending, queries will be queued and then executed once the warehouse has the appropriate capacity.

• CAPWAP (Control And Provisioning of Wireless Access Points) creates a tunnel between the AP and the Wireless LAN Controller over the IP network. The AP and WLC communicate via this CAPWAP tunnel, which can traverse Layer 2 or Layer 3 networks.
• The AP does not have to be on the same switch as the WLC. It can connect to any switch in the network, as long as there is IP reachability between the AP and the WLC. This is why option D is correct.
• The other options are incorrect:

• cloud applications only
• all Web traffic including cloud applications

• Cloud applications only: Only traffic to cloud apps is steered to Netskope for inspection/enforcement; other traffic bypasses.
• All Web traffic including cloud applications: All web-bound traffic, including cloud app traffic, is steered to Netskope.

• Browser isolation, Web traffic only, or a vague “traffic only” option are not the standard two steering modes.
• These two configurations let you decide what traffic Netskope analyzes in real time and what is bypassed.

• The “Answer(s)” field lists B and C (likely incorrect). The explanatory text correctly describes cloud applications only and all Web traffic including cloud applications as the two configurations.

• A. Flash the BIOS: Not the first move. A BIOS update can be risky when POST is failing. It’s better to first rule out simpler causes (like RAM seating). BIOS flashing is usually done if the CPU isn’t supported by the current BIOS, which you’d check after RAM seating.

• B. Check the CMOS battery: Possible but unlikely the immediate cause. CMOS battery issues would more likely cause BIOS settings to reset or clock problems. RAM seating is a more common, direct fix after a motherboard swap.

• D. Reinstall the old motherboard: Not a troubleshooting step for the new system. The goal is to get the new motherboard to POST, not revert to old hardware.

• C. Reseat the RAM: Correct because memory seating problems are the most common cause of POST failures after a motherboard swap. Re-seating ensures proper contact in the new board’s slots.

• In the source query: apply UPPER() or LOWER() to the column.
• In Power Query Editor: use Text.Upper or Text.Lower on the column, then load.

• This fixes the root cause when comparisons/joins depend on case.
• In DirectQuery, transformations are pushed to the source or query layer; ensure the transformation is supported by your data source/connector.
• After normalization, verify relationships and any downstream visuals that rely on that column.

• Answer: D. Select an IdP

• Why: To reduce the number of credentials across multiple SaaS apps, implement a single sign-on approach via an Identity Provider. The first step is choosing the IdP; once selected, you can enable SAML (A) or OAuth as supported by apps. Password vaulting (C) is not a true SSO solution, and B is not the foundational step.

• It is a sequence of distinct phases that flow one after another (requirements ? design ? implementation ? verification ? maintenance).
• Requirements are defined up front and changes are costly; the project often requires formal sign-off before moving to the next phase.
• It emphasizes heavy documentation and minimal iteration after a phase is completed.

• Self-signed certificate: Causes a certificate warning, not incorrect IP resolution.
• Nameserver record: A DNS record problem would typically affect multiple users, not just one.
• IP helper: Relays DHCP or other broadcast traffic between networks; it does not control website name resolution.

• IPsec: Protects traffic at the network layer, commonly for VPNs; it is not WPA2’s authentication protocol.
• SSL: Protects specific application sessions and has largely been replaced by TLS.
• SSH: Secures remote command-line administration.

• The question asks why some tasks appear locked in the HR Guided Setup Module’s Task view.
• The options are:

• C) They require other tasks to be completed first. In guided setup flows, tasks are usually gated by prerequisites to ensure proper sequencing and data/configuration dependencies. You typically unlock a task only after the necessary preceding tasks are finished.

• A) Elevated roles can restrict access in some contexts, but guided setup tasks are commonly gated by prerequisites rather than solely by role.
• B) Deprecation isn’t the general pattern for “locked” tasks in the guided setup.
• D) A plugin activation could unlock certain features, but the common gating mechanism is task dependencies, not plugin state.

• The page shows the answer as D, but based on how HR Guided Setup usually works, the more accurate reason is typically C (prerequisites). If you’re studying, treat C as the conceptual answer and be aware the listed key may be incorrect. If you want, I can walk through each option in more detail.

• Pay-as-you-go in Azure is an operating expense (OPEX) model, not an “elastic” expenditure model.
• Elastic or scalable terms describe capacity planning, not the cost category. The cost should be treated as OPEX since you pay for usage each month.
• The parallel question (Question 12) shows the correct approach is using an operational expenditure model.

• Correct answer: C: Amazon Comprehend.

• Why: The library wants to classify books based on their text content. This is an NLP (natural language processing) task. Amazon Comprehend is AWS’s managed NLP service that can perform content classification (including creating custom classifiers) and extract meaningful information from text. The other services are not focused on text classification:

• Quick note: In practice, you’d store the books in S3, extract text if needed (e.g., from PDFs with Textract), and then use Comprehend to classify the documents into topics or genres.

• A (training data, hyperparameters, stakeholder feedback) focuses on training provenance; these details are important but are typically part of pre-deployment/training records, not the primary post-deployment documentation.
• B (encountered issues, monitoring process, risks) relates to governance and monitoring rather than the core documentation you’d publish about the deployed model itself.
• C (licensing information, the team, business goals) covers governance context but not the technical traceability and performance-based record needed for ongoing maintenance.

• Statement 1: Admin1 must approve requests for the Agent ID Developer role — No

• Statement 2: Admin2 can approve requests for the AI Administrator role — No

• Statement 3: Admin3 can assign User1 a two-day active assignment for the Agent ID Developer role — Yes

1. Download the updated VPN client configuration package from the Azure VPN gateway.
2. Remove or update the existing VPN client configuration on the Windows 10 workstation.
3. Install the new package and reconnect.

• A recipient who already has a Microsoft account or an organizational account can authenticate by signing in.
• A recipient without a usable Microsoft identity may receive a one-time passcode by email.
• The passcode is sent to the same email address that was invited and is used to verify ownership of that address.

• Reusing features across different models and teams
• Consistent feature definitions
• Managing feature versions and metadata
• Using features for both training and inference

• SageMaker Data Wrangler: Prepares and transforms data; it is not primarily a shared feature repository.
• SageMaker Clarify: Helps detect bias and explain model predictions.
• SageMaker Model Cards: Documents models, including intended use, risks, and evaluation results.

• Permanent table (E): Correct. A dropped permanent table can be restored with UNDROP TABLE during its Time Travel retention period. Permanent tables also have Fail-safe protection.
• Transient table: It can also generally be restored during its shorter Time Travel period, although it has no Fail-safe. Therefore, excluding it makes the question questionable.
• Temporary table: Usually cannot be recovered after it is dropped; its lifecycle is limited to the session.
• Materialized view (D): The answer key treats it as recoverable, but recovery behavior depends on the specific Snowflake object/version capabilities. It should not be confused with an ordinary view.

• Leadership and stakeholder commitment
• Business capability and skills
• Organizational culture
• Availability of resources
• Ability to manage and sustain change
• Impact of the proposed transformation

• How ready the organization is
• Which areas require urgent attention
• How difficult each issue may be to resolve
• Risks that could affect implementation

• A: Places the assessment in Phase B and refers vaguely to creating views; this is not the prescribed technique.
• B: An Implementation Factor Assessment and Deduction Matrix is not the primary TOGAF technique described for business transformation readiness.
• D: A Business Scenario helps identify requirements and stakeholder concerns, but it is not the main technique for assessing organizational readiness.

• Users retain their existing usernames and passwords.
• Existing accounts can be used to access Azure-based resources.
• Administrators avoid manually recreating thousands of accounts.
• The transition is less disruptive before the on-premises data center is retired.

• Answer: Record Producer (option D)

• Why: In ServiceNow HR Service Delivery, to make an HR Service usable from the Employee Service Center (self-service portal), there must be a way for employees to submit the request. A Record Producer provides the employee-facing form that creates the underlying HR Case when submitted. Without a linked Record Producer, the HR Service wouldn’t offer a submit form in the Employee Center.

• What the other fields are generally for (not required for exposure):

• Quick check: Look at the HR Service definition and ensure a Record Producer is associated so employees can submit requests from the Employee Center.

• Recovery procedures actually work
• Recovery time and recovery point objectives can be met
• Staff understand their responsibilities
• Contact details, dependencies, and technical configurations are accurate
• Gaps or conflicts exist in the plan

• Not version-controlled: Creates a risk of using an outdated copy, but the plan might still be effective.
• Contact information needs updating: This is a specific weakness that can be corrected, often identified during testing.
• Not approved by senior management: Approval is important for authority and resource commitment, but an untested plan presents the most direct risk that recovery will fail when needed.

• '15' is a string. With + and a string, JavaScript does string concatenation: '15' + 10 -> '1510'.
• The result '1510' is then used in a multiplication: '1510' 2. The operator triggers numeric conversion, so '1510' becomes the number 1510.
• 1510 * 2 = 3020.

• If the code were let x = (15 + 10) * 2, the result would be 50 since 15 + 10 is numeric addition.

• Source: on-premises SQL Server Database1
• Destination: Fabric Warehouse Warehouse1
• Connectivity: on-premises data gateway

• Dataflow Gen1: Primarily for Power Query transformations and isn’t the best Fabric-native choice for this copy operation.
• KQL queryset: Queries data; it does not orchestrate copying from SQL Server.
• Notebook: Could perform custom code-based movement, but it is unnecessary and less direct than a pipeline.

• To get min/max per column, you need column profiling. That’s provided by enabling the column profile.
• To actually see those min/max values, you should show the column profile in the details pane, and you also need the details pane itself enabled so you can view it.

• Enable column profile (B)
• Show column profile in details pane (C)
• Enable details pane (E)

• Show column value distribution (D) shows distribution shape but isn’t required to get min/max.
• Show column quality details (D) deals with data quality metrics, not min/max.

• Correct answer: S3 Versioning

• Why the other options aren’t suitable for this protection:

• Quick tip: For enhanced protection, enable Versioning (and consider related features like Object Lock for write-once scenarios in specific compliance cases).

• Quick context: In a three-tier network (Access, Distribution, Core), roles are:

• Why A is correct: The Distribution layer runs Layer 2 and Layer 3 technologies. It often handles VLAN access (L2) and can perform inter-VLAN routing or connect to the core (L3). So it makes sense for the distribution layer to support both L2 and L3.

• Why B is correct: The Core layer is designed to maintain continuous connectivity when devices fail. It is built for high availability and redundancy, providing multiple paths so the network remains reachable even if some components fail.

• Why the others are not correct:

• Correct answer: Power BI dataset

• The scenario says the data model already contains several measures and you want to create a report from the existing data with minimal development. Reusing a published Power BI dataset lets you inherit the existing measures and data model, so you don’t have to recreate them.
• How to do it: In Power BI Desktop, use the connector Power BI datasets (Get Data > Power BI datasets) and connect to the existing dataset, then build visuals using the pre-defined measures.
• Why the other options are less suitable:

• Event | search "error"
• Event | where EventType == "error"
• search in (Event) "error"

Why B works

• AWS KMS keys are Regional resources. A normal customer managed key in Region A cannot be used directly in Region B.
• A customer managed multi-Region KMS key (MRK) has related key replicas in both Regions. The replicas share key material and key ID, although each has a Regional ARN.
• With client-side encryption, the application encrypts the data before storing it in S3. Cross-Region replication then copies already-encrypted objects, so S3 does not need to decrypt and re-encrypt them with a different Regional key.

Why the other choices are weaker

• A and C: SSE-S3 uses Amazon-managed S3 keys, not the required customer managed KMS key.
• D: SSE-KMS can work only if the solution creates and configures the appropriate KMS key or multi-Region key replica in each Region. As written, it says to create a customer managed KMS key in each Region, which implies separate keys—not the same KMS key. Replication also requires additional KMS permissions and destination encryption configuration.

• In Spark, an executor is a JVM that can have multiple cores. Each task can consume some CPUs (spark.task.cpus).
• The executor’s resources are effectively partitioned into slots, where each slot can run one task. The number of slots per executor is roughly spark.executor.cores / spark.task.cpus.
• Therefore, multiple tasks can run in parallel within the same executor (via these slots). So the statement “Tasks run in parallel via slots” is correct.

• A: A slot is not another name for an executor; a slot is a unit inside an executor.
• B: There’s no requirement that there must be fewer executors than tasks; tasks can be scheduled over time across the available slots.
• C: An executor can run more than one core; it’s not limited to a single core.
• D: There isn’t a rule that there must be more slots than tasks; tasks can wait if slots aren’t available, and you can have equal or even fewer slots than concurrent tasks.

• Correct answer: D) Microservices using API

• Why:

• What the scenario tests: How monitoring paths on a Universal Forwarder (UF) behave when you deploy an app via the Deployment Server.
• How monitoring is configured: Log paths to monitor are defined in inputs.conf (within apps/local on the UF). Splunk on the UF merges inputs from all apps and local config.
• Key point: Deploying a new app that adds a monitor for a log file does not typically remove existing monitors. The UF will continue monitoring any previously configured paths and will add the new ones from the deployed app.

• Correct answer: C) /var/log/maillog and /var/log/messages.

• Approval publish: Request approval from a manager of the knowledge base before moving the article into the publish state.
• Instant Publish: Immediately publishes a draft article without requiring an approval.
• Instant Retire: Immediately retires a published article without requiring an approval.
• Retire Knowledge: Moves a knowledge article to the retired state.

• These are the base knowledge workflows that control how articles move between states (Draft, Published, Retired) and whether approvals are required.
• The other options describe different lifecycle actions, but these four cover the standard publish/retire workflows in ServiceNow.

• Amazon DynamoDB — Managed NoSQL database, not PostgreSQL.
• Amazon Athena — Serverless service for querying data in S3; intended for analytics, not OLTP.
• Amazon EMR — Managed cluster platform for big-data frameworks such as Hadoop and Spark.

• Answer: S3 Inventory report.

• Why: The S3 Inventory report provides a scheduled listing of objects within a bucket, including metadata about each object. When you configure it to include object tagging, you can see tags for each object, and the object keys (which reflect prefixes) and bucket scope are captured in the report. This makes it suitable for auditing and tracking “tags, buckets, and prefixes” across S3 objects.

• What the other options do (not suitable for this purpose):

• Tip: If you need tags in the report, enable the inventory option to include object tagging in the configuration.

• IaaS: You deploy and manage virtual machines, operating systems, disks, and networking. Azure manages the physical datacenter and host infrastructure.
• PaaS: Azure manages the operating system and runtime so you can focus on deploying applications, such as with Azure App Service or Azure Functions.
• SaaS: You consume a complete, provider-managed application.

• Answer: A) Clear the Windows event logs

• Windows event logs (System, Security, Application) are key forensic artifacts. If an attacker clears these logs, there’s no built-in local record of actions taken, making it harder for investigators to trace what happened.

• Modify the system time: may misalign timestamps but does not erase past events and can be easily detected.
• Alter log permissions: could prevent new log entries, but it doesn’t remove existing ones and can raise alarms due to permission changes.
• Reduce log retention settings: affects only future logs; it doesn’t wipe already recorded activity.

• In real environments, defenders mitigate this risk with tamper-evident, centralized logging (remote SIEM, write-once storage, log integrity checks) to preserve evidence even if a host is compromised.

• Correct answer: A) Hashing

• Why: Hashing produces a fixed-size digest of the software. If the final build is altered in any way, the hash will change, enabling you to detect tampering by comparing the stored digest with a freshly computed one.

• Why not the others:

• C — Schema.describeSObjects(new String[]{myObject})[0].fields.getMap()

• D — Schema.getGlobalDescribe().get(myObject).getDescribe().fields.getMap()

• A: sObjectType is not used this way, and fieldSet() is not the appropriate method for retrieving all fields.
• B: mySObject.myObject is not valid dynamic Apex syntax.

cmd 
powershell.exe -ExecutionPolicy Bypass -File C:\Scripts\Configure-VM.ps1

• GPO logon script: Runs only when a user logs on, so configuration may be delayed and is user-dependent.
• GPO startup script: Can work, but requires the VMs to be domain-joined and introduces GPO dependency. It is not specifically tied to Windows deployment.
• Place scripts in a VHD: Merely makes the files available; it does not execute them.

• Correct answer: C. AWS CloudFormation

• Why: CloudFormation lets you define infrastructure as code via templates (JSON or YAML). You can create a single template that describes multiple AWS resources and reuse it to deploy consistent stacks across environments. Templates can be parameterized and stored for repeated deployments. Other options (Marketplace, AMI, OpsWorks) don’t provide reusable deployment templates in the same way.

• The correct setting to configure is the Enrollment Status Page (ESP) profile.
• Why: ESP tracks the enrollment progress and logs during Autopilot provisioning. You can enable log collection within the ESP policy so that, if ESP times out, the user can collect and share the logs with support.
• Optional enhancement: In the ESP policy (or the Autopilot diagnostics settings), you can enable:

• Automatic enrollment settings: control how devices auto-enroll, not log collection.
• Windows Autopilot deployment profile: controls deployment steps but not ESP log collection.
• Device configuration profile: applies settings but doesn’t provide ESP log collection mechanics.

• The Accrue liability on product receipt flag controls whether a liability is accrued and posted at the time of receiving the item.
• If this checkbox is unchecked, receipts won’t create postings to the Product receipt journal. Enabling it ensures the system posts inventory value and the vendor liability when the item is received.

• Go to the Item model group setup form.
• Enable (check) Accrue liability on product receipt.
• Save.

• The other option, Include physical value, affects how physical value is handled but is not the direct cause of postings to the product receipt journal. If issues persist after enabling accrual, you may need to verify related posting definitions or journal setup.

• Correct answer: B — A reservation for the server based on the MAC address.

• Why this is the best choice:

• Why the other options are less suitable:

• Quick takeaway: Use a DHCP reservation to give the file server a fixed IP while still benefiting from centralized DHCP management.

• Enable the owner dimension
• Allocate a standard costing inventory model

• Owner dimension (B): This dimension Lets you track who owns the stock. By enabling the owner dimension, items can be configured as either company owned or consignment (vendor-owned) when you create or edit items. Without enabling this dimension, you can’t designate ownership per item.
• Standard costing inventory model (D): Selecting a costing model determines how item costs are calculated and posted. Standard costing provides a fixed cost per unit, which is commonly used for agreed pricing scenarios like consignment arrangements for easier accounting and valuation. It helps ensure consistent cost treatment across transactions for items that can be owned by the company or on consignment.

• Batch dimension (A): Batch tracking is unrelated to ownership and isn’t required to support company-owned vs. consignment configurations.
• Moving average costing (C): This is an alternative costing method. It’s not required to enable ownership config, and the exam’s expected choice focuses on standard costing for this scenario.