SAP C_THR92_2311 Exam Actual Questions
SAP Certified Application Associate - SAP SuccessFactors People Analytics: Reporting 2H/2023 (Page 4 )

• MFA verifies a user’s identity using additional authentication factors, such as a phone prompt or security token.
• It helps prevent unauthorized access even if a password is compromised.
• It does not provide secure storage or encryption of credentials used during automated deployment.

• Why: After listing all resources, you need to assign who is responsible for each task. A RACI chart (Responsible, Accountable, Consulted, Informed) documents these roles for every activity.

• What RACI means:

• Why the others aren’t suitable here:

• Quick example: Task "Create user authentication module" — Responsible: Developer, Accountable: Tech Lead, Consulted: Security Architect, Informed: PM.

• Correct answer: A) Hashing

• Why: Hashing produces a fixed-size digest of the software. If the final build is altered in any way, the hash will change, enabling you to detect tampering by comparing the stored digest with a freshly computed one.

• Why not the others:

• RPO (Recovery Point Objective) — maximum acceptable data loss, measured in time. It specifies how far back in time you can tolerate data loss. Example: RPO of 2 hours means backups must occur at least every 2 hours.

• ARO (Annualized Rate of Occurrence) — expected frequency of a threat occurring per year. It estimates how often a risk is likely to happen on average (used in risk calculations).

• MTTR (Mean Time To Recover) — average time to recover/restore service after an incident. It includes detection, repair, and restoration time, and helps gauge downtime and alignment with RTO.

• Answer: A

• Reason: The Standard web tier is the lowest tier that provides dedicated compute, built-in load balancing across instances, and sufficient storage to host multiple apps with custom domains. Basic may lack the required scalability/storage, while Free/Shared do not offer dedicated compute or proper load balancing.

• A separate scope using a /32 subnet: A /32 identifies one host, but it is not a practical DHCP scope for this purpose.
• A static IP within the DHCP range: This can cause an IP address conflict if DHCP assigns that address to another device.
• SLAAC: Used for automatic IPv6 address configuration, not for assigning a predictable IPv4 address through DHCP.

• The Accrue liability on product receipt flag controls whether a liability is accrued and posted at the time of receiving the item.
• If this checkbox is unchecked, receipts won’t create postings to the Product receipt journal. Enabling it ensures the system posts inventory value and the vendor liability when the item is received.

• Go to the Item model group setup form.
• Enable (check) Accrue liability on product receipt.
• Save.

• The other option, Include physical value, affects how physical value is handled but is not the direct cause of postings to the product receipt journal. If issues persist after enabling accrual, you may need to verify related posting definitions or journal setup.

• The Balanced Scorecard translates an organization’s vision and strategy into a set of concrete objectives and metrics across four perspectives (financial, customer, internal processes, learning & growth). This framework explicitly links IT goals to business goals and provides a way to measure and monitor alignment over time.

• Enterprise architecture (EA): Great for governance, standards, and roadmaps to ensure IT assets support business needs, but it’s more about structure and alignment at design time rather than directly measuring ongoing alignment of goals.
• KPIs: Useful metrics, but they don’t by themselves provide a full framework to ensure IT goals are aligned with organizational strategy.
• Enterprise dashboard: A visualization tool for metrics; it helps report status but doesn’t inherently establish or assess alignment.

• Correct answer: only new data added to the eventhouse (option E).
• Why: When you enable OneLake availability for the eventhouse, OneLake starts syncing data going forward. It does not automatically backfill or copy over data that already exists in the eventhouse before the enablement.
• What that means in practice: Any data added to the eventhouse after you enable OneLake will appear in OneLake (and be visible from OneLake file explorer). Pre-existing data in the eventhouse stays there unless you perform a separate backfill/copy operation outside the standard OneLake enablement.
• How to verify: add a small new dataset to the eventhouse after enabling OneLake availability, then check OneLake to confirm the new dataset appears.

• Answer: Internal load balancers (ILB) — option C.

• An ILB has a frontend IP address that must be a private IP within the subnet’s address space. You pick this IP when you create the ILB, and it can be Static or Dynamic.
• Other options don’t require a per-subnet IP:

• Admin access to the deployment pipeline (B) – lets the developers use the pipeline and deploy content.
• Contributor access to the Development and Test workspaces (E) – required to deploy items into those workspaces.
• Viewer access to the Production workspace (D) – lets them view Production content without allowing deployment or modification.

• Contributor access to Production (F), because that could allow changes or deployment there.
• Viewer access to Development/Test (C), because Viewer is insufficient for deployment.
• Build permission to Production semantic models (A), because building reports on a semantic model is not required merely to view Production items.

• A recipient who already has a Microsoft account or an organizational account can authenticate by signing in.
• A recipient without a usable Microsoft identity may receive a one-time passcode by email.
• The passcode is sent to the same email address that was invited and is used to verify ownership of that address.

• L2TP uses UDP port 1701 for the L2TP control channel.
• The destination port is 1701; the source port is a dynamically chosen ephemeral port on the client (not 1701).
• Therefore the statement that both source and destination ports are 1710 is incorrect (and 1710 is not the standard L2TP port).

• The destination port should be 1701, not 1710.
• The source port should be an ephemeral port chosen by the client, not 1701.

• Answer: D) Shadow IT

• Why: Shadow IT is when employees use unsanctioned tools or bypass IT controls (like the VPN) to access services, often without IT oversight. It’s an internal behavior, not an external attacker’s activity.

• Not these:

• Quick note: This creates risk due to lack of visibility and control. Mitigations include a defined approved-tools list, enforcing VPN usage, device management, and continuous monitoring.

• prompt: the input or instruction given to the model
• completion: the desired response

json 
{"prompt":"Summarize this customer complaint.","completion":"The customer reports a delayed shipment."}

• B: A .txt file containing CSV-style lines is not automatically a valid fine-tuning dataset. The required structure and format must match the selected Bedrock model.
• C: Provisioned Throughput provides dedicated inference capacity; it does not fine-tune a model.
• D: Journals and textbooks might support domain adaptation or pretraining, but they do not provide the prompt-to-answer examples typically required for supervised fine-tuning.

• Post-Incident Review (A) is the after-action step used to capture lessons learned, identify process gaps, and drive improvements across the incident response lifecycle. This directly supports process maturity and a stronger security posture.
• Incident Analysis (D) focuses on investigating root causes during/after an incident, which is important but more of a diagnostic activity than a standalone baseline improvement to maturity.
• Fast Eradication (B) and Incident Containment (C) are tactical actions aimed at stopping the incident, not on maturing the process.

• IaaS: You deploy and manage virtual machines, operating systems, disks, and networking. Azure manages the physical datacenter and host infrastructure.
• PaaS: Azure manages the operating system and runtime so you can focus on deploying applications, such as with Azure App Service or Azure Functions.
• SaaS: You consume a complete, provider-managed application.

• In the source query: apply UPPER() or LOWER() to the column.
• In Power Query Editor: use Text.Upper or Text.Lower on the column, then load.

• This fixes the root cause when comparisons/joins depend on case.
• In DirectQuery, transformations are pushed to the source or query layer; ensure the transformation is supported by your data source/connector.
• After normalization, verify relationships and any downstream visuals that rely on that column.

• Review iteration length: Changing duration does not resolve unclear requirements.
• Limit work in progress: Useful when excessive multitasking is the problem, but it does not directly clarify requirements.
• Review individual performance: The issue is a process and backlog-quality problem, not necessarily an individual performance problem.

• Source: on-premises SQL Server Database1
• Destination: Fabric Warehouse Warehouse1
• Connectivity: on-premises data gateway

• Dataflow Gen1: Primarily for Power Query transformations and isn’t the best Fabric-native choice for this copy operation.
• KQL queryset: Queries data; it does not orchestrate copying from SQL Server.
• Notebook: Could perform custom code-based movement, but it is unnecessary and less direct than a pipeline.

• VPC: A logically isolated virtual network in a cloud environment; it describes networking, not shared application access.
• NFV: Replaces dedicated network appliances with virtualized network functions.
• SaaS: A cloud service model in which users consume an application without managing its infrastructure. It could describe how the application is delivered, but the question emphasizes serving multiple user groups, which points to multitenancy.

• Answer: C – netstat -an

• netstat -an lists all active connections and listening ports with numeric addresses, without resolving names. This lets you spot DoS patterns such as a flood of connections to a specific port or many connections from a single or few IPs.
• The other options don’t help as directly:

• Windows: netstat -an and look for numerous ESTABLISHED connections to a service or many SYNs to a port.
• Filter by port, e.g., netstat -an | findstr :80, or on Linux: ss -tunap | grep ':80'.

• Netstat provides a snapshot. DoS detection often benefits from continuous monitoring, flow data, and IDS/IPS logs.

• As the project progresses, you gain information, refine requirements, and lock down baselines (scope, schedule, cost). This reduces overall risk and uncertainty because more is known and addressed.
• At the same time, changes become more costly over time. Later changes can affect already approved baselines, cause rework, impact the critical path, require more coordination, and incur penalties or delays, all of which raise the cost of making changes.

• Server — provides services or resources
• Endpoint — a user device connected to the network
• Ethernet — a networking technology, not a filtering device
• Firewall — filters and controls traffic

• Why: ADS is designed to collect information about on-premises environments to plan migrations. It inventories details like hostname, IP address, MAC address, OS, hardware, and installed software, plus dependency mappings. This data helps you understand your current environment before moving to AWS.

• How it differs from the other options:

• Practical use: Install the ADS agent on on-prem hosts to collect data, then view the inventory in Migration Hub to inform migration planning and sequencing.

• A) configure matching hold and delay timers

• B) configure matching key-strings

• C) configure matching priority values

• D) configure unique virtual IP addresses

• IPv6 address types you’ll typically see:

• Unique Local Addresses (ULAs)

• If an address begins with fdXX:… or fc00:…, place it under “Unique Local Address” (ULA).
• If it begins with 2000::/3, place it under “Global Unicast.”
• If it begins with fe80::, place it under “Link-local.”
• If it begins with ff00::, place it under “Multicast.”

• Correct answer: B (No, it does not).

• A purchase agreement in Dynamics 365 SCM is a vendor-side price arrangement. It sets prices/discounts for what your company buys from suppliers, not for what you sell to customers.
• The objective in Question 2 is to give clients a quantity-based discount on items they purchase from you. To accomplish this, you should configure a sales price / trade agreement (on the customer/sales side), not a purchase agreement.
• In a sales price trade agreement, you can define quantity breaks such as:

• Create a Sales price trade agreement for the item and relevant customer (or customer group).
• Add quantity breaks: 51–100 with 10% discount, 101+ with 15% discount.
• Ensure the agreement is active for the desired date range.

• Residual neural network (ResNet): Primarily used for computer vision tasks such as image classification.
• Support vector machine (SVM): Commonly used for classification and regression, not natural-language query generation.
• WaveNet: Designed mainly for generating or modeling audio and speech.

• Correct answer: Power BI dataset

• The scenario says the data model already contains several measures and you want to create a report from the existing data with minimal development. Reusing a published Power BI dataset lets you inherit the existing measures and data model, so you don’t have to recreate them.
• How to do it: In Power BI Desktop, use the connector Power BI datasets (Get Data > Power BI datasets) and connect to the existing dataset, then build visuals using the pre-defined measures.
• Why the other options are less suitable:

• Why: A multi-modal embedding model maps both text and images into a shared vector space, enabling cross-modal similarity and retrieval (e.g., find images matching a text query or text matching an image).

• What it does: Enables efficient similarity search using a vector database or nearest-neighbor indexing.

• Why the other options aren’t suitable:

• Quick implementation note: you’d typically pair the embeddings with a vector store (e.g., ANN index) and possibly fine-tune on domain data for better alignment across modalities.

• S3 Versioning stores all versions of an object. If an object is overwritten or deleted, you can recover the previous version using its version ID.
• This protects against accidental deletion or overwriting because the original data remains accessible as an older version.
• How to enable:

• Practical notes:

• S3 Lifecycle rules: automate moving/expiring data, not specifically protection against deletion.
• S3 bucket policies: control access but don’t inherently preserve previous data.
• S3 server-side encryption: protects data at rest, not against deletion/overwrite.

• Answer: D

• The strongest security comes from enforcing access at the storage layer. An IAM policy scoped to the Cognito identity prefix restricts each user to their own S3 prefix (folder), so users can only access their own files regardless of client or server code.
• This per-user isolation reduces risk of cross-user data access and is more robust than UI validation or Lambda/API validation alone.
• Implementation note: attach a policy to the Cognito identity role that allows actions on arn:aws:s3:::your-bucket/${cognito-identity.amazonaws.com:sub}/* (per-user prefix). Ensure TLS in transit and enable at-rest encryption (SSE-S3 or SSE-KMS). Use multipart upload for large files up to 300 MB.

• Correct answer: All four statements are true (A, B, C, and D). The given key (A,B) is likely incorrect.

• A) Customers can change the size of the Warehouse after creation — Yes. You can resize a virtual warehouse after it’s created using ALTER WAREHOUSE ... SET WAREHOUSE_SIZE.
• B) A Warehouse can be resized while running — Yes. Snowflake supports online resizing; you can change the size without stopping queries.
• C) A Warehouse can be configured to suspend after a period of inactivity — Yes. You can enable auto-suspend with a delay (AUTO_SUSPEND).
• D) A Warehouse can be configured to auto-resume when new queries are submitted — Yes. You can enable auto-resume (AUTO_RESUME) so a suspended warehouse automatically resumes on new queries.

• Example commands:

• Even if a warehouse is resizing or auto-suspending, queries will be queued and then executed once the warehouse has the appropriate capacity.

• Why: Crisis management relies on established, repeatable procedures for responding to an incident (activation of the crisis team, escalation paths, communications, containment actions). This ensures a coordinated, timely, and auditable response.

• Why not the others:

• The standard Enterprise Architecture domains are: Business, Data, Application, Technology (BDAT).

• A: Business, strategy, application and technology — includes business and application/tech but uses “strategy” instead of data.
• B: Zachman, TOGAF, Cobit, and Heath architectures — names frameworks, not domains.
• C: Business, data, infrastructure and technology — has business, data, and technology; lacks a distinct application domain (uses “infrastructure” instead).
• D: Process, database, software and technology — covers data (database), application (software), and technology, but omits business.

• The four BDAT domains (business, data, application, technology) is the conventional model you should study.
• None of the options perfectly lists all four BDAT domains. The closest are C (if you map infrastructure to technology) and D (data/application/technology but no business).

• Correct options: C and D.

• The AWS Cloud Adoption Framework (CAF) security perspective focuses on capabilities to protect information and manage security risk.
• Observability (A) is primarily an operations/monitoring capability, not a core security capability under CAF.
• Incident and problem management (B) is IT service management/operations, not specifically a CAF security capability.
• Incident response (C) is a security-focused capability: detecting, containing, and recovering from security incidents.
• Infrastructure protection (D) involves applying security controls to protect the underlying infrastructure, which fits the security perspective.

python 
import azure.cognitiveservices.speech as speechsdk 


speech_config = speechsdk.SpeechConfig( 
    subscription="YOUR_KEY", 
    region="YOUR_REGION" 
)

Important Azure Speech SDK classes

• SpeechConfig

• AudioConfig

python 
  audio_config = speechsdk.audio.AudioConfig( 
      use_default_microphone=True 
  )

• SpeechRecognizer

python 
  recognizer = speechsdk.SpeechRecognizer( 
      speech_config=speech_config, 
      audio_config=audio_config 
  )

• SpeechSynthesizer

• AudioOutputConfig

 Bogotá, Colombia