SAP C_TS4FI_1909 Exam Prep
SAP Certified Application Associate - SAP S/4HANA for Financial Accounting Associates (SAP S/4HANA 1909) (Page 11 )

• A. IDS attack signatures: An IDS primarily detects suspicious network activity and usually alerts rather than directly scanning and blocking uploaded files.
• C. Load balancer: Distributes traffic among servers but does not inspect files for malware.
• D. WAF: Protects web applications from attacks such as SQL injection, cross-site scripting, and some malicious requests. It is not primarily a PDF-malware scanning solution.

• Voice devices ? VLAN 10
• Data devices ? VLAN 20
• SVI for VLAN 10 ? 192.168.10.1
• SVI for VLAN 20 ? 192.168.20.1

• A: Describes a physical trunk interface, not an SVI.
• B: An SVI can provide management access, but that is not its primary definition here.
• D: SVI does not compensate for insufficient physical ports; it is a logical interface.

• As the project progresses, you gain information, refine requirements, and lock down baselines (scope, schedule, cost). This reduces overall risk and uncertainty because more is known and addressed.
• At the same time, changes become more costly over time. Later changes can affect already approved baselines, cause rework, impact the critical path, require more coordination, and incur penalties or delays, all of which raise the cost of making changes.

• Permanent table (E): Correct. A dropped permanent table can be restored with UNDROP TABLE during its Time Travel retention period. Permanent tables also have Fail-safe protection.
• Transient table: It can also generally be restored during its shorter Time Travel period, although it has no Fail-safe. Therefore, excluding it makes the question questionable.
• Temporary table: Usually cannot be recovered after it is dropped; its lifecycle is limited to the session.
• Materialized view (D): The answer key treats it as recoverable, but recovery behavior depends on the specific Snowflake object/version capabilities. It should not be confused with an ordinary view.

• Equipment and hardware
• Facilities
• Inventory
• Backup media
• Supplies stored at an alternate or remote location

• Personal belongings of staff: Usually not organizational assets.
• DR line-item revenues: Revenue is a financial impact, not a physical asset.
• Cloud-based applications: These are primarily logical or information-processing assets, even though they depend on physical infrastructure.

• Correct answer: A. Inbound data transfer from the internet

• Why: AWS does not charge for data transferred into AWS from the internet. Inbound data transfer is free, regardless of the amount (in this case, 2 TB). The other options involve data leaving AWS or moving between AWS regions/AZs, which incur costs:

• Source: on-premises SQL Server Database1
• Destination: Fabric Warehouse Warehouse1
• Connectivity: on-premises data gateway

• Dataflow Gen1: Primarily for Power Query transformations and isn’t the best Fabric-native choice for this copy operation.
• KQL queryset: Queries data; it does not orchestrate copying from SQL Server.
• Notebook: Could perform custom code-based movement, but it is unnecessary and less direct than a pipeline.

Flat organisation

• Few levels of management
• A wide span of control—managers supervise many employees
• Shorter communication channels
• More employee autonomy and quicker decisions
• Fewer formal promotion levels

Tall organisation

• Many levels of management
• A narrow span of control—managers supervise relatively few employees
• A clear hierarchy and reporting structure
• More formal supervision and communication channels
• More obvious promotion and career stages

• Basic: billing/subscription support only; no technical support requests can be opened.
• Developer, Standard, Professional Direct, and Premier: include technical support and allow opening new support requests.

• If option A corresponds to “Developer, Standard, Professional Direct, Premier,” that is the correct choice.
• If the option text is really “Premier only,” that would be incorrect per current Azure docs.

• Planning — identify the need, objectives, resources and feasibility.
• Analysis — determine user requirements and examine the existing system.
• Design — specify how the new system will work.
• Implementation — build, test, install and introduce the system.
• Maintenance/evaluation — monitor and improve the system after implementation.

• View/inspect configuration: Possible.
• Modify the installed application or its S-Controls: Typically restricted in a test-drive org.

• Residual neural network (ResNet): Primarily used for computer vision tasks such as image classification.
• Support vector machine (SVM): Commonly used for classification and regression, not natural-language query generation.
• WaveNet: Designed mainly for generating or modeling audio and speech.

• Dynamics 365 Remote Assist — used for remote collaboration and mixed-reality scenarios.
• Dynamics 365 Finance — supports financial and operational management.
• Dynamics 365 Business Central — designed primarily for small and medium-sized businesses’ finance and operations.
• Dynamics 365 for Phones — provides mobile access to Dynamics 365 apps, including Sales, through the mobile Unified Interface.

• AWS Audit Manager continuously collects evidence from AWS services and helps assess whether workloads comply with regulatory frameworks and internal policies. It can produce audit-ready reports.
• AWS Config records resource configurations and evaluates them against compliance rules. For example, it can check whether encryption, logging, or access settings meet company requirements.

• Amazon Inspector identifies software vulnerabilities and unintended network exposure, not general policy or regulatory compliance.
• Amazon CloudWatch monitors metrics, logs, and operational events, but is not primarily a compliance assessment service.
• AWS CloudTrail records API activity for auditing and investigation. It supports compliance, but does not itself provide the structured compliance assessment capabilities of Audit Manager and Config.

1. Start with the Customer table.
2. Use Merge Queries and select the Address table.
3. Match Customer[Address ID] to Address[Address ID].
4. Use a Left Outer join so every customer is retained.
5. Expand only City, State/Region, and Country.

• Append adds rows vertically; it is for stacking similarly structured tables.
• Group By summarizes rows and does not retrieve address columns.
• Transpose swaps rows and columns and is unrelated to table relationships.

• Answer: Data enhancement.

• Why: Augmenting gold-layer tables with an additional dataset is enriching or enhancing the existing data to support the ad-hoc analysis. The other options don’t capture the idea of adding external data to improve the dataset (ad-hoc improvements = tweaks, last-mile dashboarding = building dashboards, last-mile ETL = ETL steps at the end of the pipeline). In practice, this is often also called data enrichment.

• Workspace: Stores notebooks, libraries, jobs, and other project resources.
• Notebooks: Interactive documents containing code, queries, visualizations, and explanations. Common languages include Python, SQL, Scala, and R.
• Clusters: Groups of virtual machines that run Spark workloads. Clusters can be started, stopped, and automatically scaled.
• Data access: Databricks can read from services such as Azure Data Lake Storage, Azure Blob Storage, and Azure SQL.
• Jobs: Automate notebooks or data-processing workflows on a schedule or in response to events.

• The 99.99% availability SLA for VMs is achieved when you run VMs across two or more Availability Zones.
• Two VMs in a single Availability Zone do not meet the 99.99% target (their SLA is lower, e.g., around 99.95% or less depending on configuration).

• Deploy at least two VMs across two different Availability Zones (one VM in each zone, or both in two zones with a load balancer).
• This provides the required zone redundancy and the 99.99% SLA.

• Multiple AWS accounts: Create a separate account for each department or workload. This provides clear isolation and makes it easier to track each department’s usage and costs for chargeback.
• Consolidated billing: AWS Organizations can combine billing for multiple accounts into one central payer account. The company can still view costs by account while managing payment centrally.

• Placement groups: Control how EC2 instances are physically placed for networking or performance; they do not provide departmental billing separation.
• Edge locations: Infrastructure used by services such as Amazon CloudFront; unrelated to chargeback.
• AWS Config: Records and evaluates resource configurations and compliance; it is not a billing-separation mechanism.

• ?????? CPU
• ?????????????????
• ??????????????????????????
• ???????????? throughput
• ??????????????????????????????

• A ??????? system software ????????????????????????????????? ??????????????????????????????????
• B ?????????????????????????? ????????????????????????? ?????????????????????????????
• D ????????????????????????? ?????????????? ?????????????????????????????????????????

• Goal: serving a static website globally with minimal latency.
• Why C works: CloudFront is a Content Delivery Network (CDN) that caches content at many edge locations around the world. When users request the site, CloudFront serves cached copies from the nearest edge location, greatly reducing latency. It also reduces load on your EC2 origin by handling many requests at the edge.
• Why the other options aren’t as good:

• Wiping securely overwrites the drive so the original data cannot reasonably be recovered. It is generally less expensive than physically destroying the device.
• Recycling could expose the data if the drive is not securely erased first.
• Shredding physically destroys the drive and is effective, but usually more costly and prevents reuse.
• Deletion only removes file references; it is not a secure sanitization method.

• Mesh: WAPs communicate wirelessly with one another, often to extend coverage without wired connections. It does not specifically describe centralized WLC management.
• Point-to-point: Connects two specific devices or locations.
• Ad hoc: Wireless devices communicate directly with one another without an access point.

• Correct answer: Power BI dataset

• The scenario says the data model already contains several measures and you want to create a report from the existing data with minimal development. Reusing a published Power BI dataset lets you inherit the existing measures and data model, so you don’t have to recreate them.
• How to do it: In Power BI Desktop, use the connector Power BI datasets (Get Data > Power BI datasets) and connect to the existing dataset, then build visuals using the pre-defined measures.
• Why the other options are less suitable:

• You provision the virtual machine.
• You manage the guest operating system, applications, and configuration.
• Azure manages the physical servers, datacenter, and underlying virtualization infrastructure.

• Geo-redundant storage (GRS) replicates data to a secondary Azure region, but the secondary copy is normally unavailable for read access.
• RA-GRS provides geo-replication and read-only access to the secondary region, satisfying all requirements.
• Zone-redundant storage (ZRS) replicates data across availability zones within the same Azure region, not separate geographic regions.
• Locally redundant storage (LRS) keeps copies within a single datacenter or region and does not provide geographic resiliency.

• Multiple nodes: Data is replicated several times in the primary region.
• Separate geography: A copy is asynchronously replicated to a secondary Azure region.
• Readable secondary: RA-GRS provides read-only access to the secondary replica, even when the primary region is available.

• GRS: Replicates to another region but the secondary copy isn’t normally readable.
• ZRS: Replicates across availability zones in the same region, not a separate geographic region.
• LRS: Keeps replicas within a single datacenter or region and provides no geographic redundancy.

• Recovery procedures actually work
• Recovery time and recovery point objectives can be met
• Staff understand their responsibilities
• Contact details, dependencies, and technical configurations are accurate
• Gaps or conflicts exist in the plan

• Not version-controlled: Creates a risk of using an outdated copy, but the plan might still be effective.
• Contact information needs updating: This is a specific weakness that can be corrected, often identified during testing.
• Not approved by senior management: Approval is important for authority and resource commitment, but an untested plan presents the most direct risk that recovery will fail when needed.

• Correct answer: D) Amazon Aurora Serverless

• Aurora Serverless is serverless, so compute capacity scales automatically and can pause during idle periods. This minimizes ongoing administration and you pay only for actual usage, which is ideal for infrequent workloads.
• PostgreSQL on EC2 requires full OS and DB administration.
• RDS for PostgreSQL is managed but still involves provisioning capacity and some maintenance tasks.
• Aurora PostgreSQL (non-Serverless) is managed but requires you to manage capacity, though with some automation; it’s not as hands-off as Serverless for intermittent usage.

• IKE: Negotiates security parameters for IPsec VPNs; it does not identify switch ports.
• VLAN: A logical network segmentation method, not a discovery protocol.
• netstat: Displays local network connections and listening services, but cannot identify the physical switch or port.

• DNS????????????????

• ???????????

• ????????????????

• The target API uses HTTPS, so Mule must validate the server’s TLS certificate.
• The TLS configuration is set to None, meaning no custom truststore is configured.
• Mule therefore uses the JRE’s default truststore to determine whether the target certificate is trusted.
• If the issuing CA certificate is in that truststore, the TLS handshake can succeed.
• If it is absent—or the certificate is otherwise invalid—the request fails with a TLS/handshake error.

• Business
• People
• Governance
• Platform
• Security
• Operations

• Program and project management
• Risk management
• Cloud financial management
• Data governance
• Portfolio management

• Sustainability
• Performance efficiency
• Reliability

1. Modify the database subnet NACL inbound rules to allow traffic from the new web subnet’s CIDR block on the MySQL port (3306).
2. Modify the database subnet NACL outbound rules to allow return traffic to the new web subnet’s CIDR block on the required ephemeral port range.

• A assigned without var becomes a global variable (in non-strict mode). So after myFunction(), a = 5 is accessible.
• b is declared with var inside the function, so it’s local to that function (function-scoped). It’s not defined in the outer (global) scope.

• console.log(a) prints 5.
• console.log(b) throws a ReferenceError: b is not defined.

• A larger question bank with verified answers
• Explanations tied to ISACA exam domains
• Current content aligned with the exam blueprint
• Useful review or progress features

• Entradas grandes, de até aproximadamente 1 GB.
• Processamentos demorados, que podem levar até cerca de 1 hora.
• O cliente envia a solicitação e consulta o resultado depois, sem precisar manter uma conexão aberta durante todo o processamento.

• Real-time inference: indicada para respostas imediatas, com entradas menores e processamento rápido.
• Serverless inference: adequada para cargas variáveis e solicitações menores; não é ideal para processamento longo e arquivos grandes.
• Batch transform: processa grandes volumes em lote, mas não atende à necessidade de respostas próximas do tempo real.

1. Create a new AMI or copy the existing AMI while specifying EBS encryption and an appropriate AWS KMS key.
2. This creates an encrypted AMI backed by encrypted EBS snapshots.
3. Copy the encrypted AMI to the destination Region, using a KMS key available there.
4. Launch the application stack from the encrypted AMI.

• B: AWS KMS does not encrypt an existing unencrypted AMI in place. You must create an encrypted copy.
• C: AWS Certificate Manager manages TLS certificates, not EBS or AMI encryption.
• D: Enabling encryption by default affects newly created EBS volumes and snapshots; it does not encrypt an existing unencrypted AMI during copying.

• In the source query: apply UPPER() or LOWER() to the column.
• In Power Query Editor: use Text.Upper or Text.Lower on the column, then load.

• This fixes the root cause when comparisons/joins depend on case.
• In DirectQuery, transformations are pushed to the source or query layer; ensure the transformation is supported by your data source/connector.
• After normalization, verify relationships and any downstream visuals that rely on that column.

• Review the risk register.
• Use the previously defined risk response plan, such as assigning a backup resource, reprioritizing work, or using another qualified engineer.
• Implement the response promptly because the task is on the critical path.

• B: Revising the schedule without first applying the planned response may be premature.
• C: Excluding a required task could compromise the project’s objectives and requirements.
• D: Updating the risk and lessons learned records is appropriate, but it should happen after managing the immediate issue, not as the next primary action.

• App Tag: a label that reflects the app’s enterprise readiness based on its Cloud Confidence Index (CCI) rating. It lets you quickly group apps (e.g., Poor, Average, Good) for policy decisions.
• App Score: a numeric value representing the CCI score. It provides a precise threshold you can use to enforce policies (e.g., block apps with Score below 50).

• You can create policies that block or restrict apps with a Poor App Tag or with an App Score under a chosen threshold.
• These two aspects let you filter cloud apps by CCI ratings during policy evaluation.

• CCL isn’t described as a real-time policy facet in this scenario.
• GDPR Readiness is a separate consideration and not the two CCI aspects used for real-time protection policy in this context.

• What the scenario asks: You have a Power BI semantic model that pulls from multiple sources (Azure SQL Database and SharePoint Online), must support a single dataset for three reports, keep data current (daily refresh by 7 AM PT), and apply RLS to limit sales data by region. You need to choose a storage mode for the tables.

• Correct choice: Dual storage mode.

• Why Dual fits:

• Key concepts:

• Honeypots: Decoy systems or services designed to attract attackers. Legitimate users should not access them, so activity on a honeypot is a strong indicator of unauthorized activity. Security teams can also observe attacker behavior.

• DNS sinkhole: Redirects requests for known malicious domains to a controlled internal server or blocks them. If an infected workstation attempts to contact command-and-control infrastructure, the sinkhole records the request and helps identify the compromised device.

• Tokenization: Protects sensitive data by replacing it with tokens.
• CI/CD: Automates software development and deployment.
• Threat modeling: Identifies potential risks before or during system design.
• Data obfuscation: Makes data harder to understand, but does not detect intruders.

• A. Tuning system software: This is a corrective action, not an analysis method. Tuning should be based on measured performance data.
• B. User dissatisfaction reports: Useful as an indicator, but subjective and insufficient for diagnosing the cause.
• D. Off-peak utilization and response time: This may hide problems occurring during peak periods. Performance analysis should cover representative or peak workloads.

• Answer: C – netstat -an

• netstat -an lists all active connections and listening ports with numeric addresses, without resolving names. This lets you spot DoS patterns such as a flood of connections to a specific port or many connections from a single or few IPs.
• The other options don’t help as directly:

• Windows: netstat -an and look for numerous ESTABLISHED connections to a service or many SYNs to a port.
• Filter by port, e.g., netstat -an | findstr :80, or on Linux: ss -tunap | grep ':80'.

• Netstat provides a snapshot. DoS detection often benefits from continuous monitoring, flow data, and IDS/IPS logs.

• S3 Lifecycle rules automate actions such as transitioning objects to different storage classes or deleting old objects.
• S3 bucket policies control access permissions; they do not preserve earlier object versions.
• S3 server-side encryption protects data confidentiality by encrypting objects at rest, but it does not prevent deletion or overwriting.

• Accidental deletion or overwriting ? S3 Versioning
• Unauthorized access ? bucket policies and IAM
• Data encryption ? server-side encryption

• Help the team identify the causes of delays.
• Encourage continuous improvement through retrospectives.
• Support the team in changing its process, tools, or collaboration methods.
• Help remove impediments that the team cannot resolve independently.

• A: An impediment log may help, but simply maintaining it does not ensure the impediments are resolved.
• B: Directing the team to solutions conflicts with agile self-management.
• C: Adding impediments to the product backlog could delay their resolution and treats them like product features.

• Correct answer: Day 3 (Option B)

• Why: In Engagement Studio, when the program is paused, the prospects’ wait times are also paused and do not count down. They resume from the same point when the program restarts. Here, the prospect was at day 3 of a 5-day wait when paused, so they resume on day 3 after the 1-day pause.

sql 
CREATE TABLE my_table 
USING CSV 
OPTIONS (path '/path/to/csv');

sql 
CREATE TABLE my_table 
USING CSV 
LOCATION '/path/to/csv';

• USING CSV specifies the file format.
• path or LOCATION specifies where the files are stored.
• USING DELTA would be used only when the source data is in Delta format.
• FROM is used in a SELECT statement, not normally as the format declaration in CREATE TABLE.