Six Sigma LSSGB Exam Prep
Lean Six Sigma Green Belt (Page 16 )

• The identified risk
• Its likelihood and potential impact
• The person or team responsible for handling it
• The response or treatment plan
• Risk thresholds, such as when escalation or action is required
• Current status and review dates

• Risk tolerance: The amount of risk an organization is willing to accept; it is a concept or limit, not usually the primary documentation.
• Risk transfer: Moving the responsibility or financial impact of a risk to another party, such as through insurance.
• Risk analysis: The process of evaluating risk likelihood and impact.

• Transfer — przeniesienie skutków lub kosztów ryzyka na inna organizacje, np. przez ubezpieczenie lub umowe.
• Akceptacja — firma swiadomie przyjmuje ryzyko bez dodatkowych dzialan.
• Mitigacja — zmniejszenie prawdopodobienstwa wystapienia ryzyka lub jego wplywu, np. przez wdrozenie kontroli bezpieczenstwa.
• Unikanie — calkowite wyeliminowanie ryzykownej dzialalnosci.

• A: Allow SAN certificates — SANs are used to identify valid hostnames in a certificate. They do not bypass trust validation.
• C: Open the secure LDAP port — A blocked port would normally cause a timeout or connection-refused error, not certificate errors.
• D: Increase the TLS version on the RA — The issue concerns certificate trust, not the organization’s registration authority.

• The explanation states that Traffic Analytics can be enabled by a user with one of these subscription-level roles:

• Question 34 — Network Contributor: Yes
• Question 35 — Owner: Yes
• Question 36 — Reader: Yes, according to the stated explanation and documentation

• Sensitive document shared during a Teams chat: Teams chat
• Sensitive document stored/shared in a Teams channel: Teams channel messages

• Files shared in a chat are generally stored in the sender’s OneDrive, but the relevant DLP context is the Teams chat message and its attachment.
• Files shared in a channel are stored in the team’s SharePoint site, but the relevant context is the Teams channel message.
• The DLP rule can then use an action such as restrict access to the content to prevent guest users from opening the sensitive document.

• C — Custom buttons display at the top and bottom of a page: Correct. In Salesforce Classic, buttons can appear in the page’s button areas, including the top and bottom of record pages.
• D — Custom buttons are available for Person Accounts: Correct. Person Accounts use the Account object, so Account custom buttons can be available on Person Account layouts.
• E — Custom buttons can reference an external app: Correct. A URL custom button can launch or navigate to an external application or website.

• A: JavaScript custom buttons are a Salesforce Classic feature and are not supported in Lightning Experience. They do not enhance Lightning Experience.
• B: The User object does not generally support custom buttons in the same way standard business objects do.

• Issuer: Identifies the party issuing a SAML message—usually the identity provider in the assertion. It is not the Salesforce-specific identifier the architect should provide for differentiating Salesforce.
• Identity Provider Login URL: The endpoint where users are sent to authenticate.
• SAML identity location: Determines where the user identity is found in the SAML assertion, such as the subject or an attribute.

• Reviewing and validating generated code
• Checking security, licensing, and quality concerns
• Testing the implementation
• Making the final design and coding decisions

• A: Copilot is not a complete replacement for developers.
• C: Human input, review, and oversight are still required.
• D: Copilot Chat supports many tasks beyond debugging, including explanation, generation, refactoring, and testing assistance.

1. Which host originated the infection

1. Which remaining hosts are infected

• Supervised learning requires labeled examples to learn how to classify customers.
• Reinforcement learning learns through actions, rewards, and penalties, which is not the main task here.
• RLHF uses human feedback to improve model behavior, typically for generative AI, not customer segmentation.

• BIOS language support: Useful for usability, but not whether the PC can operate electrically.
• Supply chain security: Concerns procurement and hardware trust, not deployment across countries.
• Power efficiency: Important for energy usage, but it does not ensure compatibility with local power systems.

• Online payment fraud
• Account takeover
• Fake account creation
• Suspicious transactions

• MAC flooding: Overwhelms a switch’s MAC address table, potentially causing traffic to be broadcast.
• DNS spoofing: Provides false DNS responses to redirect users.
• ARP poisoning: Sends false ARP information to associate an attacker’s MAC address with another device’s IP address.

python 
def add_integers(a, b): 
    return a + b

• Uses def to define a function.
• Accepts two parameters, a and b.
• Uses return to send their sum back to the caller.
• Uses indentation to define the function body.

python 
result = add_integers(3, 4) 
result is 7

• Confirm the required columns and data types
• Identify the target/label column
• Handle missing or duplicate records if present
• Transform data into a suitable format
• Split it into training and validation/test datasets

1. Prepare the training data
2. Select an algorithm or configure AutoML
3. Train the model
4. Evaluate its performance
5. Tune hyperparameters if needed
6. Deploy the model

• Normalize casing in the data source—for example, convert all values to uppercase or lowercase.
• Add an index key to provide a unique, stable identifier for each row or value.

• Data Category Groups e categorias;
• Visibilidade dessas categorias para perfis ou permission sets.

• B e C: regras de compartilhamento não são o mecanismo apropriado para restringir resultados de busca do Knowledge por divisão.
• D: a role hierarchy não é o mecanismo principal para controlar a visibilidade de categorias do Knowledge. Além disso, a configuração correta é atribuir visibilidade a perfis ou permission sets.

• A: Reduce management overhead — This is generally an advantage of public cloud, not hybrid cloud. Hybrid environments can increase management complexity.
• B: Cross-platform virtualization — Not the defining advantage of hybrid cloud.
• D: Leverage IaaS and PaaS — Public clouds commonly provide both IaaS and PaaS, so this is not unique to hybrid cloud.

• Modelo de embeddings de texto: trabalha principalmente com texto, não sendo adequado para imagens.
• Modelo generativo multimodal: pode interpretar ou gerar conteúdo de vários tipos, mas não é a opção específica para busca por similaridade.
• Modelo de geração de imagens: cria imagens a partir de entradas, não realiza busca multimodal.

• 800 devices ? a scalable, centralized solution is needed.
• Four hardware/vendor classes ? the tool must handle different drivers and images.
• Two user groups ? it should allow different configurations for each group.
• “Distribute custom images” ? an imaging/deployment tool is required, not just a file-copy utility.

• Voice devices ? VLAN 10
• Data devices ? VLAN 20
• SVI for VLAN 10 ? 192.168.10.1
• SVI for VLAN 20 ? 192.168.20.1

• A: Describes a physical trunk interface, not an SVI.
• B: An SVI can provide management access, but that is not its primary definition here.
• D: SVI does not compensate for insufficient physical ports; it is a logical interface.

kusto 
Event 
| summarize make_set(EventID) by Computer

• summarize groups records.
• by Computer creates one result row per virtual machine.
• make_set(EventID) returns an array containing unique event IDs for that computer.

kusto 
| summarize make_list(EventID) by Computer

1. Get Data ? Folder in Power BI Desktop.
2. In Power Query Editor, expand the Attributes column to expose metadata such as hidden status and other file attributes.
3. Remove the Content column (and any other data columns you do not need).

• Name
• Extension
• Date accessed
• Date modified
• Folder Path
• Attributes
• Content

Question 3: AWS Storage Gateway File Gateway

• A: S3 bucket per user — S3 is object storage, not a traditional shared file system; mounting it requires extra tools and is less efficient.
• B: File Gateway — Provides a local file share using standard file protocols while storing files in Amazon S3. This preserves convenient local access and extends storage capacity.
• C: WorkSpaces and WorkDocs — Designed for virtual desktops and document collaboration, not large shared file storage.
• D: EC2 with EBS — EBS is attached to one EC2 instance and is not designed for direct multi-user file sharing.

1. Define Power Platform DLP policies

1. Add custom prompt modifications

1. Conduct adversarial testing

• Replace the keyboard: More expensive and unnecessary before simpler causes are ruled out.
• Replace the key switch: Laptop keyboards generally aren’t designed for individual switch replacement.
• Replace the circuit board: Excessive for a single nonworking key and not a cost-effective first step.

• Approve major information security policies
• Allocate funding and resources
• Set the organization’s risk appetite
• Ensure security supports business objectives

• Evaluating vendors is generally handled by security, procurement, or technical teams.
• Assessing risks is typically performed by security and risk-management professionals, with management accepting or prioritizing the risks.
• Monitoring regulatory adherence is usually handled by compliance, audit, or security functions.

• Restarting the device: may fix software problems, but not a directional connection issue.
• Swollen battery: is a safety concern, but would not typically cause recognition only in one orientation.
• Failing cable: possible in general, but less likely because it works on other similar devices.
• Dirty or damaged port: best matches the symptoms. Inspect and carefully clean the port, or have it serviced if damaged.

• CCTV system — Detective control: Cameras monitor and record activity, helping identify or investigate security incidents after—or while—they occur.
• Signs about being filmed — Deterrent control: The signs discourage people from attempting unauthorized or criminal activity because they know surveillance is present.

• Preventive: Stops an incident from occurring, such as a lock or access-control system.
• Corrective: Restores systems after an incident.
• Directive: Instructs people to behave in a certain way, such as a security policy.
• Compensating: Provides an alternative control when the preferred control cannot be implemented.

• A. Tuning system software: This is a corrective action, not an analysis method. Tuning should be based on measured performance data.
• B. User dissatisfaction reports: Useful as an indicator, but subjective and insufficient for diagnosing the cause.
• D. Off-peak utilization and response time: This may hide problems occurring during peak periods. Performance analysis should cover representative or peak workloads.

• Use one Azure AD directory for the organization.
• Separate divisions with subscriptions and/or resource groups.
• Assign each division’s administrator appropriate Azure role-based access control (RBAC) permissions, scoped to their subscription or resource group.

• B. Users accessing Salesforce from public Wi-Fi

• C. Users choosing the same password as their Facebook password

• A: 2FA does not protect an already-authenticated, unlocked session if someone accesses an unattended laptop.
• D: Weak password-reset questions are an account-recovery weakness. 2FA primarily strengthens login authentication, not necessarily the security-question reset process.

• Determining ISP-assigned address space: Usually involves public reconnaissance, such as WHOIS or regional Internet registry information.
• Bypassing DNS sinkholing: Would require evidence that malicious domains are resolving outside the organization’s sinkhole controls.
• Achieving initial access: DNS log entries alone do not demonstrate compromise or entry.
• Exfiltrating data: DNS tunneling generally involves repeated queries containing encoded or unusually long data, not merely internal host discovery.

• Microsoft 365 groups can contain users, but generally can’t contain other groups as members.
• Security groups can contain users and, where supported, other security groups.
• Distribution groups have different nesting restrictions and aren’t equivalent to security groups.
• Dynamic groups can’t be manually populated with members; their membership is calculated from rules.
• A group’s membership type (Assigned or Dynamic) and group type determine whether it can be added to another group.

• GPU: A failure may cause no video output, but the PC usually still powers on.
• RAM: Can prevent booting or produce error beeps, but fans and power indicators generally work.
• CPU: Can prevent startup or booting, but it usually does not cause a completely lifeless system.

1. Product + ProductSubCategory: Inner join

1. Result + ProductCategory: Left outer join

1. You try to access a cloud application, such as accounting software.
2. The application redirects you to the company’s IdP.
3. You authenticate with the IdP.
4. The IdP sends a digitally signed SAML assertion to the application.
5. The application validates the assertion and grants access.

• The user’s identity
• Whether authentication succeeded
• Roles or group membership
• Access-related attributes

• A: Daily involvement is unnecessary and may not solve the availability problem.
• C: Clarifying all requirements at the start conflicts with agile’s iterative refinement.
• D: Simply reviewing based on availability leaves the problem unresolved and allows rework to continue.

• Secure: uses encryption, such as HTTPS or SFTP.
• Cross-platform: supported by many languages and operating systems.
• Internet-friendly: designed to communicate across networks, usually using standard Internet protocols.

• JSON/REST over HTTPS — widely supported, secure, and Internet-friendly.
• SOAP over HTTPS — also secure and highly cross-platform, though more heavyweight.
• XML over SFTP — secure file-based exchange, but it is not an API-style interface.

• A: My Domain is required for many SSO configurations, but if SSO works, it is unlikely to be the cause of losing the target record.
• B: HTTP-POST is a valid SAML binding and does not inherently prevent redirection.
• D: An incorrect Federation ID generally causes authentication or user-matching failure—not successful login to the home page.

• Password spraying: Tries a few common passwords against many accounts; no indication of repeated login attempts.
• Remote-access Trojan (RAT): Could install malware, but it does not explain how the attacker obtained the administrator’s credentials.
• Dictionary attack: Tries words or common passwords against an account; again, the scenario specifically highlights Telnet’s lack of encryption.

• Personally identifiable information (PII) detection

• Prompt Shields

• Self-harm content filtering addresses self-harm-related content.
• Violence content filtering addresses violent content.
• Neither protects customer PII or detects document-based prompt injection.

• Digitally signing the software: Verifies authenticity and integrity. It does not hide how the software works.
• Limiting third-party libraries: May reduce dependencies and attack surface, but does not directly prevent reverse engineering.
• Using compile flags: Some compiler options can remove debugging information or optimize code, which may provide limited protection, but this is not the primary technique identified for preventing reverse engineering.

• staff use the new system;
• transactions and reports are checked;
• problems are corrected;
• feedback is collected.

• Phased changeover: different parts or functions are introduced in stages, often according to a planned sequence.
• Pilot changeover: one representative department, branch or group acts as a test site before wider implementation.
• Parallel changeover: old and new systems operate at the same time.
• Direct changeover: the old system is stopped and the new one starts immediately.

• The legacy system creates a signed JWT assertion.
• Salesforce validates the assertion using a certificate configured on a Connected App.
• Salesforce issues an access token for the integration user.
• No refresh token is required; the system can request a new access token when needed.

• Web Server Flow: normally uses a client secret and authorization/refresh tokens.
• Username-Password Flow: requires storing Salesforce credentials and is discouraged for integrations where stronger options are available.
• User Agent Flow: intended for user-interactive applications, not unattended server-to-server processing.

• Secret scope: A named container that groups related secrets and defines access permissions. Example: finance-prod.
• Secret key: The name of an individual secret stored inside that scope. Example: db-password.

text 
Scope: finance-prod 
  Key: db-username 
  Key: db-password

python 
dbutils.secrets.get( 
    scope="finance-prod", 
    key="db-password" 
)

• Keep earlier prompt versions.
• Identify the last version that produced acceptable output.
• Restore it as a baseline.
• Make small, controlled changes—ideally one significant change at a time.
• Test the output after each change.

• A: Discards useful information about what worked.
• B: Large simultaneous changes make it difficult to identify the cause of problems.
• D: Accepts output that does not meet the requirements.

• AWS Audit Manager continuously collects evidence from AWS services and helps assess whether workloads comply with regulatory frameworks and internal policies. It can produce audit-ready reports.
• AWS Config records resource configurations and evaluates them against compliance rules. For example, it can check whether encryption, logging, or access settings meet company requirements.

• Amazon Inspector identifies software vulnerabilities and unintended network exposure, not general policy or regulatory compliance.
• Amazon CloudWatch monitors metrics, logs, and operational events, but is not primarily a compliance assessment service.
• AWS CloudTrail records API activity for auditing and investigation. It supports compliance, but does not itself provide the structured compliance assessment capabilities of Audit Manager and Config.

• The user starts in the corporate portal.
• The portal launches the Salesforce resource.
• The IdP sends the SAML response to Salesforce.

• Connected App + OAuth is for OAuth authorization and API/app access, not this SAML-based seamless login scenario.
• SP-initiated SSO would begin when the user first requests the Salesforce resource and Salesforce redirects them to the IdP. That is not the described starting point.

1. Select Exchange email as a location.
2. Use the built-in Azure Storage Account key sensitive information type as the condition.
3. Configure the DLP action to encrypt the email—for example, using Microsoft Purview Message Encryption.