Six Sigma LSSGB Exam Prep
Lean Six Sigma Green Belt (Page 5 )

• MAC flooding: Overwhelms a switch’s MAC address table, potentially causing traffic to be broadcast.
• DNS spoofing: Provides false DNS responses to redirect users.
• ARP poisoning: Sends false ARP information to associate an attacker’s MAC address with another device’s IP address.

• Check whether the data is accurate, complete, and properly prepared.
• Confirm that the pattern is not caused by an outlier, data-quality problem, or modeling issue.
• If the data is valid, treat the result as a potentially valuable new business insight.

• A: A data scientist may help, but expert validation and data-quality checking come first.
• C: Filtering out inconvenient data risks hiding a valid insight.
• D: Einstein’s result should not be accepted without verification simply because it produced the finding.

• Microsoft 365 groups can contain users, but generally can’t contain other groups as members.
• Security groups can contain users and, where supported, other security groups.
• Distribution groups have different nesting restrictions and aren’t equivalent to security groups.
• Dynamic groups can’t be manually populated with members; their membership is calculated from rules.
• A group’s membership type (Assigned or Dynamic) and group type determine whether it can be added to another group.

• Valor maior: mais aderência às instruções e aos detalhes descritos.
• Valor menor: mais liberdade criativa e resultados potencialmente mais variados.
• Valor excessivamente alto: pode causar artefatos ou imagens menos naturais.

• Aumentar o número de passos de geração: pode melhorar qualidade e refinamento, mas não é o principal controle de especificidade do prompt.
• MASK_IMAGE_BLACK: relaciona-se ao uso de máscara em geração ou edição de imagens, não à especificidade textual.
• Prompt strength: é mais associado à força do prompt em processos como image-to-image; nesta questão, o parâmetro diretamente ligado à aderência textual é o CFG scale.

• Keep earlier prompt versions.
• Identify the last version that produced acceptable output.
• Restore it as a baseline.
• Make small, controlled changes—ideally one significant change at a time.
• Test the output after each change.

• A: Discards useful information about what worked.
• B: Large simultaneous changes make it difficult to identify the cause of problems.
• D: Accepts output that does not meet the requirements.

• A — VARIANT "null" values are not the same as SQL NULL: Correct.

• B — Frequent, single-row DMLs: Incorrect.

• C — Validate data before loading into the target table: Correct.

• D — Use staging tables to manage MERGE statements: Correct.

• ARP poisoning: Redirects or intercepts local network traffic; monitoring would typically show suspicious ARP changes or man-in-the-middle behavior.
• Jamming: Interferes with wireless or radio signals. It would affect connectivity, not usually show a server-specific overload.
• Kerberoasting: Attempts to obtain and crack Kerberos service-account hashes; it does not normally cause a system outage.

1. Identify the fact table

• Records something that happened, such as a sale, test, appointment, or measurement
• Contains foreign keys to other tables
• Contains measures or numeric results
• Has many rows

2. Identify a dimension table

• Describe people, products, dates, locations, or departments
• Contain descriptive columns
• Are referenced by the fact table
• Have fewer rows than the fact table

3. Identify the surrogate key

• System-generated
• Unique within the dimension
• Often named PatientKey, CustomerKey, or similar
• Usually an integer
• Not meaningful outside the model

• 800 devices ? a scalable, centralized solution is needed.
• Four hardware/vendor classes ? the tool must handle different drivers and images.
• Two user groups ? it should allow different configurations for each group.
• “Distribute custom images” ? an imaging/deployment tool is required, not just a file-copy utility.

• Drops packets when traffic exceeds a certain bitrate: This describes traffic policing, not shaping.
• Fragments large packets and queues them: Shaping does not fragment packets as its primary congestion-control action.
• Drops packets randomly from lower-priority queues: Packet dropping may occur if a shaping queue becomes full, but it is not the defining behavior.

• Shaping: buffers and delays excess traffic.
• Policing: drops or marks traffic that exceeds the configured rate.

• Gaia Portal: Controlled by Gaia administration settings, not SmartConsole Trusted Clients.
• SSH: Controlled by Gaia or operating-system SSH access settings.
• Security Gateway(s): SmartConsole connects to the Security Management Server, not directly to gateways for this purpose.

• Azure Resource Manager (ARM) templates define Azure resources in a declarative JSON file.
• You can deploy the same template repeatedly for each business unit, ensuring that identical resources are created consistently.
• Templates reduce manual administrative effort and support repeatable, automated deployments.
• Parameters can customize values such as names, regions, and sizes while keeping the overall resource configuration the same.

• A is correct: Days beyond the included period incur an extra daily charge.
• D is incorrect: Daily use after 10 days is not free.
• B and C: Data-transfer pricing can depend on the direction and service terms. The exam’s intended distinction is that the included device usage period is the clearly stated no-cost benefit.

• A — Reports: Reports are informational and don’t enforce access during an SSO transaction.
• B — Apex trigger and Permission Sets: A trigger could update permissions when a Case changes, but this creates synchronization and timing issues. It also changes Salesforce permissions rather than making a direct, real-time decision for the external system.
• C — Custom SAML JIT Provisioning: JIT provisioning is primarily for creating or updating users at login. It isn’t the appropriate mechanism for dynamically querying business records and deciding whether access should be granted.
• D — Connected App Handler: Designed for custom, programmatic control during connected-app authentication and authorization. Apex can check the user’s current open classified cases and permit or reject the SSO request.

• The current and previous versions
• Which clauses were changed
• When each revision occurred
• Potentially, who made the changes

• Version validation: Verifies a version’s accuracy or integrity but does not primarily track revisions.
• Version changes: Not the standard name for a formal document-management process.
• Version updates: Describes updating a document, not the complete process of managing and tracking its revisions.

• Separate accounts/domains create a strong administrative boundary between non-production and production.
• Separate projects provide distinct IAM boundaries, billing, quotas, service accounts, and resources.
• Developers can receive permissions in the development project without automatically gaining access to production.
• Production administrators can be restricted from development resources, supporting separation of duties and least privilege.

• A: Creates excessive project fragmentation without being required by the stated requirement.
• C: Keeps development and production under one account and does not clearly separate administrative duties.
• D: Uses one account and only two projects; it provides some project isolation but weaker organizational separation.

• Subject: The entity that initiates an action—here, Derrick/user account.
• Object: The resource being accessed— the file.
• Action: Reading the file.

• Planning — identify the need, objectives, resources and feasibility.
• Analysis — determine user requirements and examine the existing system.
• Design — specify how the new system will work.
• Implementation — build, test, install and introduce the system.
• Maintenance/evaluation — monitor and improve the system after implementation.

1. You try to access a cloud application, such as accounting software.
2. The application redirects you to the company’s IdP.
3. You authenticate with the IdP.
4. The IdP sends a digitally signed SAML assertion to the application.
5. The application validates the assertion and grants access.

• The user’s identity
• Whether authentication succeeded
• Roles or group membership
• Access-related attributes

• An Azure pay-as-you-go subscription follows an operational expenditure (OpEx) model.
• With OpEx, the organization pays for services as they are used, typically based on consumption.
• There is no need to purchase and maintain physical servers upfront.
• This contrasts with capital expenditure (CapEx), where the company makes a significant upfront investment in infrastructure, such as on-premises Hyper-V hosts.

• Sending calls to available agents quickly
• Balancing interactions across agents
• Preventing calls from being handled manually one at a time

• Workforce Management: Forecasts demand and schedules enough staff; it supports wait-time reduction but does not directly distribute calls.
• Skill-based Routing: Routes calls based on agent skills and may improve the customer experience, but the question is asking about the core feature that distributes calls efficiently.
• IVR: Lets callers navigate menus and self-service options; it does not primarily assign calls to agents.

1. Find the subnet-mask increment in the octet where the prefix ends.
2. Identify the network address by finding the subnet boundary at or below the given IP.
3. The first usable address is network address + 1.
4. The broadcast address is one address before the next subnet.
5. The last usable address is broadcast - 1.

• 172.28.228.144/18

• 172.28.228.144/23

Flat organisation

• Few levels of management
• A wide span of control—managers supervise many employees
• Shorter communication channels
• More employee autonomy and quicker decisions
• Fewer formal promotion levels

Tall organisation

• Many levels of management
• A narrow span of control—managers supervise relatively few employees
• A clear hierarchy and reporting structure
• More formal supervision and communication channels
• More obvious promotion and career stages

• Threat perspective: Focuses on possible attacks, but may seem technical or hypothetical.
• Compliance perspective: Can motivate action, but compliance alone does not demonstrate the broader business value of governance.
• Policy perspective: Policies are important, but they are a means of implementing governance, not its primary business justification.

• An Anypoint VPC provides private network connectivity for CloudHub applications.
• An IPsec VPN tunnel or AWS Direct Connect connects that VPC to the customer’s on-premises network without exposing the database to the public internet.
• The VPC and on-premises firewalls must allow the required traffic, routes, and ports.

• Static IP addresses only identify the application’s outbound traffic; they do not create a private network path to the database.
• A Dedicated Load Balancer does not replace the required network connection to the on-premises environment. It is also unnecessary merely to reach individual databases.
• Moving sensitive databases to a DMZ is not the intended architecture and could reduce their protection.

• A larger question bank with verified answers
• Explanations tied to ISACA exam domains
• Current content aligned with the exam blueprint
• Useful review or progress features

• Accept: Acknowledging the risk without taking additional action.
• Mitigate: Reducing the likelihood or impact through controls, such as patching or employee training.
• Avoid: Eliminating the activity or condition that creates the risk.
• Transfer: Shifting the consequences—usually financial—to another party, such as an insurer.

• Restarting the device: May fix software glitches, but would not usually make cable orientation matter.
• Swollen battery: A safety concern, but it would not typically cause recognition only in one cable orientation.
• Failing cable: Possible, but less likely because the problem occurs with this particular device and not other devices of the same type.

• Password spraying: Tries a few common passwords against many accounts; no indication of repeated login attempts.
• Remote-access Trojan (RAT): Could install malware, but it does not explain how the attacker obtained the administrator’s credentials.
• Dictionary attack: Tries words or common passwords against an account; again, the scenario specifically highlights Telnet’s lack of encryption.

1. Identify every Region containing a replica.
2. Schedule deletion of the KMS key in each Region.
3. Use the minimum KMS waiting period: 7 days.

• A — Use the root user: Root access does not eliminate the need to schedule deletion for every regional replica. The problem is the multi-Region structure, not insufficient administrative permissions.

• C — Update the key policy: The policy already grants kms:* to IAM principals. Changing permissions does not delete the key or its replicas.

• D — Disable the key and schedule deletion in 30 days: Disabling can stop cryptographic use, but 30 days is slower than the permitted 7-day waiting period. It also does not address replicas in other Regions.

• Cloud architecture
• Data architecture
• Platform engineering
• Data engineering
• Provisioning and modernization

• Data protection is associated mainly with security and risk management.
• Data governance belongs to the governance perspective.
• Data science is not an AWS CAF capability.

• The servers are powered on.
• The network is functioning.
• Devices can still reach the server network.

• ARP poisoning: Redirects or intercepts local network traffic; it usually affects communication paths rather than overwhelming a service.
• Jamming: Disrupts wireless or radio signals. It would not fit a system that remains accessible from devices on the server network.
• Kerberoasting: Attempts to crack service-account credentials from Kerberos tickets; it does not normally cause an immediate outage.

• Encryption to preserve confidentiality
• Integrity protection to detect alteration
• Authentication of the server through certificates

• SHA-256: A hashing algorithm; it does not encrypt data for transmission.
• SSL 3.0: Obsolete and insecure. It should not be used.
• AES-256: A strong encryption algorithm, but by itself it does not provide the complete secure communication protocol needed for data in transit.

• D — Create sibling resource pools for the Production VMs and Test VMs.

• B — Configure a memory reservation on the Production resource pool.

• Shares only determine relative priority when resources are scarce; they do not guarantee memory.
• A parent resource pool alone does not provide a guarantee.
• A child pool for Test VMs does not reserve memory for Production.

• B. Data loss prevention (DLP): Helps prevent sensitive data from being copied, emailed, or exfiltrated. It is not the primary control for protecting a stolen laptop’s stored data.
• C. Operating system hardening: Reduces vulnerabilities by disabling unnecessary services and applying secure settings, but it does not necessarily protect the files if the disk is accessed directly.
• D. Boot security: Helps ensure the device starts only through trusted software or approved processes. It supports platform integrity but does not itself encrypt stored files.

• SQL injection
• Cross-site scripting (XSS)
• Malicious file uploads
• Common web-application exploits

• Layer 4 firewall: Filters primarily by IP addresses, ports, and transport protocols; it lacks detailed web-application inspection.
• NGFW: Provides advanced network filtering and may include application awareness, but a WAF is more specialized for protecting web applications.
• UTM: Combines several security functions in one device, but it is not specifically focused on web-application attacks.

• Whether a user has a console password
• Password age and last password change
• Whether MFA is enabled
• Access key status
• Access key creation date and last-use information
• Access key age, which helps audit rotation

• IAM Access Analyzer identifies unintended access to resources; it does not report credential age or rotation.
• AWS Artifact provides AWS compliance documents and agreements, not details about your IAM users.
• AWS Audit Manager helps collect evidence for audits, but it is not the direct tool for viewing IAM credential rotation details.

1. Get Data ? Folder in Power BI Desktop.
2. In Power Query Editor, expand the Attributes column to expose metadata such as hidden status and other file attributes.
3. Remove the Content column (and any other data columns you do not need).

• Name
• Extension
• Date accessed
• Date modified
• Folder Path
• Attributes
• Content

• Aggregation happens once, during the scheduled job.
• Dashboard users query a relatively small, precomputed table.
• Repeated users do not trigger expensive aggregations against the detailed sales table.
• Overwriting is appropriate because the summary is rebuilt for the reporting period.

• B: Structured Streaming is unnecessary for data that only needs daily refreshes and adds operational/compute overhead.
• C: A view recomputes the aggregation at query time, increasing latency and query cost.
• D: Delta caching may improve reads but does not replace the need to materialize the expensive aggregation, and cache availability is not the main design guarantee.

• Conserve public IPv4 addresses: IPv4 addresses are limited, so many internal devices share a smaller number of public addresses through NAT.
• Reduce direct exposure: Private addresses are not directly routable from the public Internet, which helps reduce unsolicited access to internal devices.

1. Ensure BOMs can include subcomponents ? Configure an entity relationship

1. Report changes made by engineers ? Enable auditing

• Configure entity relationship
• Configure auditing

• Replaces the verbal message — this describes non-verbal communication being used instead of words.
• Substitutes for verbal communication — similar; it means communicating without speech.
• Confuses the verbal message — this occurs when non-verbal signals contradict or obscure the spoken message.

• Multiple nodes: Data is replicated several times in the primary region.
• Separate geography: A copy is asynchronously replicated to a secondary Azure region.
• Readable secondary: RA-GRS provides read-only access to the secondary replica, even when the primary region is available.

• GRS: Replicates to another region but the secondary copy isn’t normally readable.
• ZRS: Replicates across availability zones in the same region, not a separate geographic region.
• LRS: Keeps replicas within a single datacenter or region and provides no geographic redundancy.

• A — Increasing the minimum password length to 14 characters: Longer passwords have more possible combinations, making them harder to guess or crack through brute force.
• F — Requiring at least one special character: This increases password complexity and expands the possible character combinations.

• MD5 to SHA-512: Improves password-hash resistance, but does not stop users from choosing easy-to-guess passwords. Also, modern systems should use a password-specific hashing algorithm such as bcrypt, scrypt, or Argon2.
• Increasing maximum age to 120 days: Leaves weak passwords in use longer.
• Reducing minimum length to 10: Makes guessing easier.
• Reducing minimum age to zero: Allows immediate password changes but does not make the password itself harder to guess.

• Personally identifiable information (PII) detection

• Prompt Shields

• Self-harm content filtering addresses self-harm-related content.
• Violence content filtering addresses violent content.
• Neither protects customer PII or detects document-based prompt injection.

• Uses on-premises data or resources
• Runs components in the cloud
• Can scale across multiple cloud environments when demand increases

• Public cloud: Resources are hosted entirely by a cloud provider.
• Private cloud: Resources are dedicated to one organization, usually in its own environment.
• Hybrid: Combines on-premises and cloud resources.

• C series: CPU-optimized instances; not designed primarily for LLM training.
• G series: GPU instances generally optimized for graphics and some machine learning workloads, but not specifically large-scale model training efficiency.
• P series: Powerful GPU instances for ML training, but typically consume more energy than Trainium-based instances for suitable training workloads.

• Customer: Dual
• Date: Dual
• Sales: DirectQuery
• SalesAggregate: Import

• Sales – DirectQuery: Near-real-time data should not rely on an imported cache. DirectQuery sends queries to the source when visuals are loaded, allowing recent sales data to appear.
• SalesAggregate – Import: A weekly refresh is sufficient, and imported data generally gives faster visual performance because it is stored in Power BI’s in-memory cache.
• Customer and Date – Dual: These are dimension tables used with both the DirectQuery Sales table and the imported SalesAggregate table. Dual allows Power BI to use cached data when possible, while still behaving appropriately in queries involving DirectQuery data. This can improve performance and reduce unnecessary limited relationships.

• The listener has a virtual IP address on the load balancer.
• The active SQL Server replica must respond using the listener’s IP address, not its own VM IP.
• Floating IP allows the listener IP to be preserved and returned by the active replica.
• This is required for the SQL Always On listener configuration.

• A health probe for the SQL listener/cluster role
• The SQL Server listener port, commonly 1433
• Appropriate backend pool membership

• A — Correct: Flow Builder is declarative and visual, so administrators and other non-developers can participate in designing and improving business processes without writing Apex.
• D — Correct: Flow Builder provides visual debugging tools, allowing an admin to test paths, inspect variable values, and identify where a specific business case fails.
• E — Correct: A flow’s visual structure documents the logic and makes later maintenance easier than reading and updating custom Apex code.

• B — Incorrect: Flow debugging does not attach a debugger to live customer sessions. The admin uses Flow Builder’s debug functionality with test inputs; this is not live-session debugging and should not be used to monitor real customer transactions.