Six Sigma SSGB Exam Prep
Six Sigma Green Belt (Page 16 )

• A. Extranet
• B. VLAN
• C. Intranet
• D. VPN

• Business
• People
• Governance
• Platform
• Security
• Operations

• Cloud financial management
• Portfolio and program management
• Risk management
• Data governance
• Compliance and oversight

• SageMaker endpoint: Not required because the model is being used through Amazon Bedrock.
• SageMaker Model Registry: Used for managing SageMaker models, not for making a Bedrock custom model available.
• Grant access in Amazon Bedrock: IAM permissions may still be needed, but granting access alone does not provide the required inference capacity.

• Issuer: Identifies the party issuing a SAML message, commonly the IdP in the SAML assertion. It is not the Salesforce setting used to distinguish Salesforce from other service providers.
• Identity Provider Login URL: Specifies where Salesforce sends users for authentication; it does not identify Salesforce.
• SAML Identity Location: Specifies where the user identity is found in the SAML assertion, such as the subject or an attribute.

• A vulnerability scanner automates discovery of known vulnerabilities and misconfigurations across systems. It can contribute to a supply-chain assessment.
• A penetration test actively attempts exploitation and is usually limited to an agreed scope.
• SCAP standardizes vulnerability and configuration assessment data; it is not the analysis itself.
• Illumination tool is not a commonly defined CompTIA Security+ term.

• View/inspect configuration: Possible.
• Modify the installed application or its S-Controls: Typically restricted in a test-drive org.

• Used for communication on the local link or LAN segment
• Automatically generated on IPv6-enabled interfaces
• Not routed by routers to other networks
• Commonly used by devices to communicate with their local IPv6 router
• Begins with FE80 through FEBF

• FC00::/7 — unique local unicast
• FE80::/10 — link-local unicast
• FF00::/8 — multicast
• 2000::/3 — global unicast

• nomes de pessoas;
• organizações;
• locais;
• datas;
• números de processos;
• leis ou contratos.

• NER = identifica informações específicas e classificáveis.
• Sumarização = reduz um documento e apresenta seus pontos principais.

json 
{ 
  "Effect": "Deny", 
  "NotAction": [ 
    "iam:*", 
    "route53:*", 
    "cloudfront:*", 
    "support:*" 
  ], 
  "Resource": "*", 
  "Condition": { 
    "StringNotEquals": { 
      "aws:RequestedRegion": "eu-west-1" 
    } 
  } 
}

• SCPs set maximum permissions; they do not grant permissions. The default SCP allows actions, so the restriction must be an explicit Deny.
• aws:RequestedRegion checks the Region targeted by an API request.
• StringNotEquals: eu-west-1 denies requests directed to every other Region.
• NotAction allows designated global services to remain usable because they do not operate in a single AWS Region.
• Attaching the SCP to the OU makes it apply to existing accounts and accounts later added to that OU.

Flat organisation

• Few levels of management
• A wide span of control—managers supervise many employees
• Shorter communication channels
• More employee autonomy and quicker decisions
• Fewer formal promotion levels

Tall organisation

• Many levels of management
• A narrow span of control—managers supervise relatively few employees
• A clear hierarchy and reporting structure
• More formal supervision and communication channels
• More obvious promotion and career stages

• Low usage during the first three weeks
• Very high usage during the last week

• High availability: Keeps services running despite failures.
• High latency: Means slow response times; it is not a benefit.
• Load balancing: Distributes traffic across resources but does not specifically address scaling resources up and down.

1. Get Data ? Folder in Power BI Desktop.
2. In Power Query Editor, expand the Attributes column to expose metadata such as hidden status and other file attributes.
3. Remove the Content column (and any other data columns you do not need).

• Name
• Extension
• Date accessed
• Date modified
• Folder Path
• Attributes
• Content

• Developed and maintained independently
• Deployed without changing the entire application
• Scaled separately based on demand
• More resilient when another service has problems

• A: Functional testing is useful, but it is not the main practice described.
• B: Automation helps deployment, but the scenario focuses on architectural decomposition.
• C: Multiple locations improve availability, not application modularity.

• A. Number ? Decimal — Correct. Salesforce Number fields are represented in Apex as Decimal.
• D. Date/Time ? Datetime — This is correct conceptually, but “Dateline” is not an Apex type. If the option literally says “Dateline,” it is incorrect.
• E. Checkbox ? Boolean — Correct. A checkbox contains true or false.

• Number ? Integer — A Number field maps to Decimal, even when its scale is zero.
• Text Area ? List<String> — A text area maps to a single String, not a list.

• SQL injection (SQLi): Attacks databases by inserting malicious SQL commands.
• Cross-site scripting (XSS): Injects scripts into web pages viewed by other users.
• Sideloading: Installing an application from outside the official app store. It may install unauthorized apps, but it does not generally unlock the operating system or enable restricted system features.

1. Selling price per unit: $750
2. Required annual return:

1. Required profit per unit:

1. Target cost per unit:

• Planning – identifying the need, objectives, scope and resources.
• Analysis – understanding business requirements and current problems.
• Design/development – determining how the system will work.
• Implementation – installing the system and putting it into operation.

• Dynamics 365 Remote Assist — used for remote collaboration and mixed-reality scenarios.
• Dynamics 365 Finance — supports financial and operational management.
• Dynamics 365 Business Central — designed primarily for small and medium-sized businesses’ finance and operations.
• Dynamics 365 for Phones — provides mobile access to Dynamics 365 apps, including Sales, through the mobile Unified Interface.

• 800 devices ? a scalable, centralized solution is needed.
• Four hardware/vendor classes ? the tool must handle different drivers and images.
• Two user groups ? it should allow different configurations for each group.
• “Distribute custom images” ? an imaging/deployment tool is required, not just a file-copy utility.

• Conserve public IPv4 addresses: IPv4 addresses are limited, so many internal devices share a smaller number of public addresses through NAT.
• Reduce direct exposure: Private addresses are not directly routable from the public Internet, which helps reduce unsolicited access to internal devices.

• vSmart controls the overlay control plane. It uses OMP to exchange routing information, distribute policies, and determine how WAN Edge devices reach one another.
• vManage is the centralized management and configuration platform.
• vBond is the orchestrator. It helps devices authenticate, discover controllers, and traverse NAT during onboarding.
• APIC-EM is not the SD-WAN control-plane component described here.

• prompt: the input or instruction given to the model
• completion: the desired response

json 
{"prompt":"Summarize this customer complaint.","completion":"The customer reports a delayed shipment."}

• B: A .txt file containing CSV-style lines is not automatically a valid fine-tuning dataset. The required structure and format must match the selected Bedrock model.
• C: Provisioned Throughput provides dedicated inference capacity; it does not fine-tune a model.
• D: Journals and textbooks might support domain adaptation or pretraining, but they do not provide the prompt-to-answer examples typically required for supervised fine-tuning.

• Mesh: WAPs communicate wirelessly with one another, often to extend coverage without wired connections. It does not specifically describe centralized WLC management.
• Point-to-point: Connects two specific devices or locations.
• Ad hoc: Wireless devices communicate directly with one another without an access point.

• Multiple nodes: Data is replicated several times in the primary region.
• Separate geography: A copy is asynchronously replicated to a secondary Azure region.
• Readable secondary: RA-GRS provides read-only access to the secondary replica, even when the primary region is available.

• GRS: Replicates to another region but the secondary copy isn’t normally readable.
• ZRS: Replicates across availability zones in the same region, not a separate geographic region.
• LRS: Keeps replicas within a single datacenter or region and provides no geographic redundancy.

• A Layer 2 switch checks the destination MAC address in its MAC address table (CAM table).
• If the destination MAC is unknown, the switch cannot select a specific outgoing port.
• It therefore performs unknown-unicast flooding, sending the frame out every other port in that VLAN.
• The frame is not sent back through the port where it arrived.

• In the source query: apply UPPER() or LOWER() to the column.
• In Power Query Editor: use Text.Upper or Text.Lower on the column, then load.

• This fixes the root cause when comparisons/joins depend on case.
• In DirectQuery, transformations are pushed to the source or query layer; ensure the transformation is supported by your data source/connector.
• After normalization, verify relationships and any downstream visuals that rely on that column.

• A. A virtual network gateway
• D. A virtual network

• Azure virtual machines must be connected to an Azure virtual network (VNet). The VNet provides private IP addressing and network connectivity for the VMs.
• A virtual network gateway enables communication between the Azure VNet and the on-premises network, typically through a site-to-site VPN or ExpressRoute connection.

• Load balancer: Distributes traffic among Azure VMs; it does not connect Azure to an on-premises network.
• Application gateway: Provides web-application load balancing and Layer 7 routing; it is not the normal resource for on-premises connectivity.
• Gateway subnet: A gateway subnet is required inside the VNet when deploying a virtual network gateway, but the question’s intended two primary resources are the VNet and virtual network gateway.

• The VM keeps its configuration, disks, IP settings, and associated resources.
• The operation may cause downtime.
• You cannot guarantee that it will move specifically to Host2; Azure selects the new host.
• Update management is for update configuration, not host relocation.
• Moving to another subscription does not move the VM to a different physical host.
• Usage location is unrelated to VM placement.

• Identity provider (IdP): Authenticates users and asserts their identity.
• Service provider (SP): The application being accessed—in this case, Salesforce/the employee portal.
• Identity store: A directory that stores user identities, such as Active Directory.
• Authentication store: A system used to validate credentials.

• A. Tuning system software: This is a corrective action, not an analysis method. Tuning should be based on measured performance data.
• B. User dissatisfaction reports: Useful as an indicator, but subjective and insufficient for diagnosing the cause.
• D. Off-peak utilization and response time: This may hide problems occurring during peak periods. Performance analysis should cover representative or peak workloads.

• A. Implement retries with exponential backoff

• C. Reduce the frequency and/or size of requests

• B. Use PutRecord instead of PutRecords — PutRecord sends one record per call and does not remove the underlying throughput limitation. It may increase request overhead.
• D. Use Amazon SNS instead — SNS is not a direct fix for Kinesis shard throttling and changes the required streaming architecture.
• E. Reduce KCL consumers — KCL consumers read from Kinesis; they do not solve producer-side PutRecords throttling.

• Cutover: The old system is replaced immediately. It may be fast, but any failure can cause significant disruption.
• Phased: The system is introduced in stages, which reduces implementation risk but may prolong the transition.
• Pilot: The system is first deployed to a limited group or location. This is useful for testing but does not necessarily minimize downtime for the entire organization.

1. Remote access to a Windows PC
2. Full chat and optional game-console functions

• Windows Remote Desktop (RDP) uses TCP 3389. The router needs a port-forwarding rule that sends incoming traffic on that port to the Windows PC’s internal IP address.
• The game console should connect through the wireless AP. Using WPA2-PSK provides the required wireless security while allowing normal online, chat, and optional services.
• The firewall should separate the internal network from the screened subnet. Its screened-subnet-side address is shown as 10.100.0.1.
• Devices must be placed in the correct network locations: the PC behind the router, the console on the wireless AP, and the firewall between the appropriate network segments.

• MAC flooding: Overwhelms a switch’s MAC address table, potentially causing traffic to be broadcast.
• DNS spoofing: Provides false DNS responses to redirect users.
• ARP poisoning: Sends false ARP information to associate an attacker’s MAC address with another device’s IP address.

• A recipient who already has a Microsoft account or an organizational account can authenticate by signing in.
• A recipient without a usable Microsoft identity may receive a one-time passcode by email.
• The passcode is sent to the same email address that was invited and is used to verify ownership of that address.

• The listener has a virtual IP address on the load balancer.
• The active SQL Server replica must respond using the listener’s IP address, not its own VM IP.
• Floating IP allows the listener IP to be preserved and returned by the active replica.
• This is required for the SQL Always On listener configuration.

• A health probe for the SQL listener/cluster role
• The SQL Server listener port, commonly 1433
• Appropriate backend pool membership

• The user starts in the corporate portal.
• The portal launches the Salesforce resource.
• The IdP sends the SAML response to Salesforce.

• Connected App + OAuth is for OAuth authorization and API/app access, not this SAML-based seamless login scenario.
• SP-initiated SSO would begin when the user first requests the Salesforce resource and Salesforce redirects them to the IdP. That is not the described starting point.

• Port 515: LPD/LPR line-printer service
• Port 631: IPP — Internet Printing Protocol
• Port 9100: JetDirect/RAW printing, commonly used by network printers

• Linux machine: Linux could run these services, but the three printer-specific ports strongly indicate a printer.
• Router: Routers may use Telnet and HTTP, but normally would not expose ports 515, 631, and 9100 together.
• Windows machine: Windows can share printers, but this particular service combination is more characteristic of a network printer’s embedded operating system.

• Leaf switches provide access ports for servers, endpoints, and other devices.
• Spine switches form the fabric’s backbone.
• Every leaf connects to every spine, creating a predictable, high-bandwidth, low-latency path.

• A: Adding both a spine and leaf is unnecessary for simply adding access ports.
• B: Adding a spine does not directly provide endpoint access ports.
• D: A single connection to one spine creates a bottleneck and a single point of failure.

• Basic: No technical or architectural guidance.
• Standard: Technical support, but not the required design-assessment service.
• Professional Direct: Provides advisory and architecture guidance.
• Premier: Provides it too, but is unnecessarily expensive for this requirement.

• 25 — Traditional SMTP server-to-server delivery; often restricted for client submission and not inherently encrypted.
• 110 — POP3 for retrieving email; unencrypted by default.
• 143 — IMAP for retrieving and synchronizing email; unencrypted by default.
• 587 — Authenticated SMTP submission, commonly secured with STARTTLS.

1. Determine which host was infected first—the originating host.
2. Decide whether each other host is clean or infected based on communication and event logs.

• Compare timestamps and find the earliest suspicious event.
• Look for the host that initiated the malicious connection, file transfer, exploit, or command—not merely a host that later received traffic.
• Follow the timeline through the firewall:

• A host is likely infected if it both receives suspicious activity and then initiates related malicious traffic.
• A host may be clean if the firewall blocked the connection and there is no evidence of execution or follow-on communication.

• Workspace: Stores notebooks, libraries, jobs, and other project resources.
• Notebooks: Interactive documents containing code, queries, visualizations, and explanations. Common languages include Python, SQL, Scala, and R.
• Clusters: Groups of virtual machines that run Spark workloads. Clusters can be started, stopped, and automatically scaled.
• Data access: Databricks can read from services such as Azure Data Lake Storage, Azure Blob Storage, and Azure SQL.
• Jobs: Automate notebooks or data-processing workflows on a schedule or in response to events.

• Define the contractor’s deliverables, responsibilities, acceptance criteria, and deadlines.
• Agree on a reporting cadence to monitor progress.
• Allow the local company to use its expertise and manage its own work.

• A: “Under the supervision of the project manager” suggests excessive direct control and is less empowering.
• B: Micromanaging prevents the contractor from functioning independently and is inefficient.
• D: Deploying the contractor’s staff under the PM’s supervision creates a staffing/control arrangement rather than empowering the contracted company.

• Goal: Identify the host that originated the infection, then label each remaining host as infected or clean based on log evidence.

• Logs to review (across hosts and firewall):

• How to identify the origin:

• How to classify other hosts:

• Quick tip: use the Reset All option if you want to re-run the scenario and practice again.

• The policy is confidential, and the requester is no longer authorized merely because they used to work for the organization.
• The security professional should not disclose it by email or display it on a device without authorization.
• Using official channels allows the organization’s owner or information custodian to verify:

• The Balanced Scorecard translates an organization’s vision and strategy into a set of concrete objectives and metrics across four perspectives (financial, customer, internal processes, learning & growth). This framework explicitly links IT goals to business goals and provides a way to measure and monitor alignment over time.

• Enterprise architecture (EA): Great for governance, standards, and roadmaps to ensure IT assets support business needs, but it’s more about structure and alignment at design time rather than directly measuring ongoing alignment of goals.
• KPIs: Useful metrics, but they don’t by themselves provide a full framework to ensure IT goals are aligned with organizational strategy.
• Enterprise dashboard: A visualization tool for metrics; it helps report status but doesn’t inherently establish or assess alignment.

• A — VARIANT "null" values are not the same as SQL NULL: Correct.

• B — Frequent, single-row DMLs: Incorrect.

• C — Validate data before loading into the target table: Correct.

• D — Use staging tables to manage MERGE statements: Correct.

• A — IDS attack signatures: An IDS generally detects suspicious network activity but does not necessarily scan uploaded PDF files or prevent them from being accepted.
• C — Load balancer: Distributes traffic among servers; it does not inspect files for malware.
• D — WAF command-injection blocking: A WAF can help block web attacks such as command injection, SQL injection, and cross-site scripting, but this option does not specifically address malicious PDF uploads.

• You normally do not create a new sensitive information type for credit card numbers. Microsoft Purview already provides a built-in Credit Card Number sensitive information type.
• The required sequence should generally be: