Six Sigma SSGB Exam Prep
Six Sigma Green Belt (Page 2 )

• netstat: Shows local network connections and listening ports, but not which WAN path carries the traffic.
• nslookup: Resolves domain names to IP addresses.
• ping: Tests reachability and latency but does not show the route.

• A — Custom Button: A button can launch a flow, typically by passing the flow’s URL and record context.
• D — From a Process: A Process can invoke a flow using an Apex action configured for flow invocation. However, this is automation-triggered, not directly accessed by a user.
• B — Quick Action: In current Salesforce functionality, a Flow Quick Action can launch a screen flow directly from a record page. This makes B a valid modern method.
• C — Visual Workflow Launcher: This is not generally listed as a standard access method in current Salesforce terminology; Salesforce commonly uses the Flow component on Lightning pages instead.

• A vulnerability scanner automates discovery of known vulnerabilities and misconfigurations across systems. It can contribute to a supply-chain assessment.
• A penetration test actively attempts exploitation and is usually limited to an agreed scope.
• SCAP standardizes vulnerability and configuration assessment data; it is not the analysis itself.
• Illumination tool is not a commonly defined CompTIA Security+ term.

text 
heartrateheartrateheartrate

• Spark column objects can be multiplied, for example:

python 
  df["heartrate"] * 3

• A DataFrame itself cannot be multiplied, but the expression is referring to a column.
• It is also not primarily a Python syntax error; the code was parsed, then Spark failed while resolving the column name.

1. Open the Microsoft Entra Connect wizard.
2. Select Configure.
3. Choose Customize synchronization options.
4. Authenticate when prompted.
5. On the Domain and OU filtering page, select:

1. Complete the wizard.

• Start-ADSyncSyncCycle only starts synchronization; it does not change which OUs are included.
• Manage federation configures federation settings, which are unrelated to OU filtering.
• Add-ADSyncConnectorAttributeInclusion concerns connector attributes, not selecting additional OUs for synchronization.

• The type of change: standard, normal, or emergency
• The risk, impact, and complexity
• The change model being used

• A standard change may be pre-authorized through its change model.
• A normal change may require assessment and approval by an appropriate change authority.
• An emergency change may be authorized by an emergency change authority, often using an expedited process.

• Change authorities are not only needed for emergency changes.
• They are not assigned only when a change is deployed.
• They are not only required for normal changes.

• state preserves the client’s original context, such as the specific idea URL the user requested.
• The portal sends that value in the OAuth authorization request.
• Salesforce returns it after authorization, allowing the portal to redirect the user to the original idea rather than the Ideas home page.

• The S3 bucket as an origin for static content
• The Application Load Balancer (ALB) as an origin for dynamic content
• An Amazon Route 53 alias record pointing the application domain to CloudFront

Why this works

• Static data: CloudFront caches objects from S3 at edge locations, reducing latency for users worldwide.
• Dynamic data: CloudFront forwards requests that require application processing to the ALB. It can also maintain persistent connections and use the AWS global edge network to improve delivery performance.
• One domain: CloudFront behaviors can route different path patterns to different origins—for example, /static/* to S3 and other paths to the ALB.

Why the other options are incorrect

• Global Accelerator is designed primarily for accelerating traffic to applications with endpoints such as ALBs, not for caching S3 content.
• Using separate domains or splitting static and dynamic traffic adds unnecessary complexity.
• CloudFront already provides the required global edge distribution and caching, so combining it with Global Accelerator is unnecessary here.

• Generates a syslog message
• Shuts down the PoE port
• Places the port into error-disabled (err-disabled) state
• Frees the power allocation

• A device starting to draw power does not necessarily generate a syslog message.
• Monitoring does not pause data traffic while checking power.
• Drawing less than the configured minimum does not automatically mean the device has failed and should be disconnected.

• Response and resolution time frames
• Availability or uptime requirements
• Performance targets
• Support obligations
• Penalties for failing to meet requirements

• SOW (Statement of Work): Defines the project’s scope, tasks, and deliverables.
• MOA (Memorandum of Agreement): Describes cooperation and responsibilities between parties.
• MOU (Memorandum of Understanding): Records a general mutual understanding, usually without detailed enforceable service targets.

• Unfamiliar locations or IP addresses
• Anonymous or malicious IP addresses
• Leaked credentials
• Unusual sign-in behavior

• Database data: Aggregates are used to retrieve structured data, commonly from entities and database sources.
• Screen scope: A Screen Aggregate belongs to the screen where it is defined and is not directly reusable as a screen-level aggregate elsewhere.
• Asynchronous and parallel execution: Multiple Screen Aggregates can run asynchronously and in parallel, helping the screen load data efficiently.

json 
{ 
  "Effect": "Deny", 
  "NotAction": [ 
    "iam:*", 
    "route53:*", 
    "cloudfront:*", 
    "support:*" 
  ], 
  "Resource": "*", 
  "Condition": { 
    "StringNotEquals": { 
      "aws:RequestedRegion": "eu-west-1" 
    } 
  } 
}

• SCPs set maximum permissions; they do not grant permissions. The default SCP allows actions, so the restriction must be an explicit Deny.
• aws:RequestedRegion checks the Region targeted by an API request.
• StringNotEquals: eu-west-1 denies requests directed to every other Region.
• NotAction allows designated global services to remain usable because they do not operate in a single AWS Region.
• Attaching the SCP to the OU makes it apply to existing accounts and accounts later added to that OU.

• User preferences change, so the model must learn from recent data.
• Keeping the existing data helps preserve knowledge of older patterns and provides a broader training distribution.
• Training only on new data can cause catastrophic forgetting and may overfit if the new dataset is small.
• The new data should not automatically be used as the test set, because it is needed for training and the model must still be evaluated on separate, representative data.

• vSmart controls the overlay control plane. It uses OMP to exchange routing information, distribute policies, and determine how WAN Edge devices reach one another.
• vManage is the centralized management and configuration platform.
• vBond is the orchestrator. It helps devices authenticate, discover controllers, and traverse NAT during onboarding.
• APIC-EM is not the SD-WAN control-plane component described here.

• Sensitive document shared during a Teams chat: Teams chat
• Sensitive document stored/shared in a Teams channel: Teams channel messages

• Files shared in a chat are generally stored in the sender’s OneDrive, but the relevant DLP context is the Teams chat message and its attachment.
• Files shared in a channel are stored in the team’s SharePoint site, but the relevant context is the Teams channel message.
• The DLP rule can then use an action such as restrict access to the content to prevent guest users from opening the sensitive document.

• Menerjemahkan soal ke bahasa Indonesia.
• Menyebutkan jawaban yang benar.
• Menjelaskan alasan jawaban tersebut.
• Memberi tahu jika kunci jawaban yang tersedia tampaknya keliru.
• Menjelaskan istilah teknis penting dalam soal.

• AWS AppSync is designed for serverless applications that need to retrieve and combine data from multiple sources.
• A pipeline resolver can invoke multiple functions or data-source resolvers, including resolvers connected to different DynamoDB tables.
• The application can receive the combined result through one GraphQL request, without requiring custom aggregation logic in the application.
• This is operationally efficient because AppSync manages the API layer and resolver execution.

• Athena Federated Query is intended primarily for analytics and ad hoc querying, not low-latency application data retrieval.
• Querying DynamoDB through Athena can consume DynamoDB read capacity and may affect table performance.
• It also introduces analytical-query overhead and is not the normal choice for a microservice web application.

• Packet capture: Collects and analyzes network traffic; it does not describe the scan type.
• Privilege escalation: Attempts to gain higher permissions after obtaining access.
• System enumeration: Identifies systems, services, or resources, but is not specifically defined by the lack of credentials.
• Passive scan: Observes traffic without actively probing systems. A vulnerability scan is generally an active assessment.

• Ease of exploitation
• Required privileges
• User interaction
• Impact on confidentiality, integrity, and availability

• CVE: Identifies and names a specific publicly known vulnerability; it does not measure severity.
• OSINT: Refers to intelligence gathered from publicly available sources.
• SOAR: Automates and coordinates security operations, such as alert response and playbooks.

• Prevention costs: Avoiding defects, such as staff training and improved product design. The company has invested in these.
• Appraisal costs: Detecting defects before products reach customers, such as inspection and testing. The planned batch sampling has not been implemented.
• Internal failure costs: Correcting defects found before delivery.
• External failure costs: Dealing with defects after delivery, such as refunds, replacements, complaints and lost sales.

1. You try to access a cloud application, such as accounting software.
2. The application redirects you to the company’s IdP.
3. You authenticate with the IdP.
4. The IdP sends a digitally signed SAML assertion to the application.
5. The application validates the assertion and grants access.

• The user’s identity
• Whether authentication succeeded
• Roles or group membership
• Access-related attributes

• Gaia Portal: Controlled by Gaia administration settings, not SmartConsole Trusted Clients.
• SSH: Controlled by Gaia or operating-system SSH access settings.
• Security Gateway(s): SmartConsole connects to the Security Management Server, not directly to gateways for this purpose.

• Active-active routers: Provide redundant Internet connections/devices. Both can operate, so traffic can fail over or be load-balanced.
• Active-active firewalls: Avoid a single firewall becoming a failure point while maintaining security inspection.
• Load balancers: Distribute requests across multiple web servers. If one server fails, traffic can go to the other.
• Redundant power supplies: A server with separate power supplies should connect to independent power sources or circuits.
• UPS A and UPS B: Provide backup power and redundancy. Ideally, each power supply is connected to a different UPS.
• SONET ring: A ring topology provides alternate paths if a fiber link or segment fails.

• Restrict a port to a defined number of MAC addresses
• Use statically assigned or “sticky” MAC addresses
• Shut down or restrict the port when violations occur

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect suspicious network activity, but is not the primary control for limiting switch MAC entries.
• NGFW: Filters traffic at the network boundary; it does not directly prevent MAC table flooding on access switches.

1. Find the subnet-mask increment in the octet where the prefix ends.
2. Identify the network address by finding the subnet boundary at or below the given IP.
3. The first usable address is network address + 1.
4. The broadcast address is one address before the next subnet.
5. The last usable address is broadcast - 1.

• 172.28.228.144/18

• 172.28.228.144/23

• Restarting the device: may fix software problems, but not a directional connection issue.
• Swollen battery: is a safety concern, but would not typically cause recognition only in one orientation.
• Failing cable: possible in general, but less likely because it works on other similar devices.
• Dirty or damaged port: best matches the symptoms. Inspect and carefully clean the port, or have it serviced if damaged.

• Virtual machine disks
• Databases
• Storage accounts
• File systems

• Site-to-site VPN: protects data moving between networks
• HTTPS: protects data moving between a client and website
• Encrypted email: generally protects the message while being transmitted

• At rest = stored data
• In transit = moving data
• In use = data currently being processed by a system

• The Subscribe to Reports user permission.
• At least Viewer access to the report’s folder.
• Access to the report itself.

• Subscribe to Reports: Run Reports is not the relevant Salesforce permission.
• Chatter Subscribe to Reports is not a Salesforce permission.
• Set Running User relates to configuring the user whose permissions determine report results—not subscribing to a report.

• B: Trigger.Once + scheduled job

• C: 10-minute processing-time trigger

• If the hashes match, the software has likely not changed.
• If they differ, the software was modified or corrupted.

• Encryption: Protects confidentiality by making data unreadable; it does not primarily verify that software was unchanged.
• Baselines: Establish expected configurations or states, but hashing is the specific method for checking file integrity.
• Tokenization: Replaces sensitive data with non-sensitive tokens and is unrelated to software integrity.

1. Define – establish the project’s objectives, scope, feasibility and requirements.
2. Design – plan how the project will be carried out, including resources, schedules and controls.
3. Deliver – execute the project and produce the required outputs.
4. Develop – close the project formally and capture learning for future projects.

• Filing documentation and records
• Closing project and accounting systems
• Settling costs
• Handing over the completed work and obtaining sign-off
• Reviewing performance and giving feedback

• A valid input returns the expected result
• An invalid input raises an error
• Boundary values are handled correctly

• B: Copilot may help generate tests, but it does not automatically write all necessary tests.
• C: Writing the implementation does not verify that it works correctly.
• D: Copilot can suggest test commands or test code, but the developer or development environment must execute and validate the tests.

• What information each stakeholder needs
• When and how often it should be communicated
• Which format or channel should be used
• Who is responsible for communicating it

• A: The team should not decide stakeholder communications without first checking the established plan and CEO’s needs.
• B: An executive summary may be appropriate, but choosing a solution before reviewing the plan is premature.
• D: The stakeholder engagement plan addresses how to engage stakeholders, but this is primarily a communication planning issue.

1. Modify the database subnet NACL inbound rules to allow traffic from the new web subnet’s CIDR block on the MySQL port (3306).
2. Modify the database subnet NACL outbound rules to allow return traffic to the new web subnet’s CIDR block on the required ephemeral port range.

• ARP poisoning: Redirects or intercepts local network traffic; monitoring would typically show suspicious ARP changes or man-in-the-middle behavior.
• Jamming: Interferes with wireless or radio signals. It would affect connectivity, not usually show a server-specific overload.
• Kerberoasting: Attempts to obtain and crack Kerberos service-account hashes; it does not normally cause a system outage.

• Tactics: The attacker’s overall goal, such as gaining persistence or exfiltrating data
• Techniques: The methods used to achieve that goal
• Procedures: The specific implementation or sequence of actions

• IP addresses and hash values: Useful indicators, but they can change quickly.
• Indicators of compromise: TTPs may help identify IOCs, but their main value is describing behavior.
• Tools: Attackers can replace tools or use legitimate administrative utilities.

• Portfolio definition cycle — establishes and maintains the portfolio strategy, objectives, and management framework.
• Portfolio delivery cycle — coordinates and monitors the delivery of change initiatives, ensuring the portfolio remains aligned with strategic objectives and delivers value.

• Practice — a structured area of portfolio management activity, such as risk management or resource management.
• Technique — a method used to perform an activity; it is not the term for portfolio delivery itself.
• Principle — a guiding rule for effective portfolio management.

• Microservices: An application design approach that divides software into small services; it does not specifically reduce the number of operating systems.
• Containerization: Uses isolated containers that share the host OS kernel—best match.
• Virtualization: Creates separate virtual machines, and each typically requires its own guest OS, so it does not minimize OS instances as effectively.
• Infrastructure as code: Automates deployment and management of infrastructure; it does not describe the architecture being used.

• File hashes
• Strings and metadata
• Binary or code structure
• Known malicious patterns
• Embedded indicators or signatures

• Sandbox: Executes the file in an isolated environment; useful for observing behavior, but usually slower.
• Network traffic analysis: Examines communications generated by a system or application, not the file itself.
• Package monitoring: Tracks software packages or installations and is not the primary method for examining malware signatures.

• An Adj-SID does not necessarily need manual configuration.
• It can often be dynamically allocated by the router, although manual configuration may also be possible.
• The adjacency information is advertised through the IGP, such as IS-IS or OSPF.

• It is identified by an Adj-SID.
• It represents a particular adjacency of a node.
• Its meaning is generally local to the advertising node; unlike a Node-SID, it is not a globally reusable instruction across the network.

• Replaces the verbal message — this describes non-verbal communication being used instead of words.
• Substitutes for verbal communication — similar; it means communicating without speech.
• Confuses the verbal message — this occurs when non-verbal signals contradict or obscure the spoken message.

• Disable default accounts: Default or unused accounts may have predictable names or credentials and can be abused by attackers. They should be disabled, removed, or secured with strong credentials where necessary.
• Remove unnecessary services: Every running service can contain vulnerabilities or provide an entry point. Removing services the server does not need reduces exposure.

• Add the server to the asset inventory: Important for asset management, but it does not directly harden the system.
• Document default passwords: Default passwords should be changed or disabled—not recorded for continued use.
• Send logs to the SIEM: Supports monitoring and detection, rather than directly reducing the attack surface.
• Join the corporate domain: A deployment/configuration decision, not inherently a hardening measure.

• Each team’s Bedrock workflow uses a separate IAM service role.
• The role’s Amazon S3 permissions can be limited to only that team’s customer folder or objects.
• This enforces least privilege and prevents one team’s Bedrock application from accessing another team’s data.
• Access is enforced by AWS permissions, not by asking users to provide a customer name in each request.

• A single role with broad S3 access does not provide team-level isolation.
• Asking teams to specify a customer name is not an access-control mechanism.
• Redacting data does not prevent unauthorized access.
• A bucket policy alone is insufficient unless it explicitly enforces the required team-role restrictions.

• Fileless malware: Nothing in the command indicates malware executing only in memory.
• Living-off-the-land binaries: Mimikatz is a credential-access tool, not a normal system utility used for LOLBin abuse.
• Social engineering: The command shows technical credential abuse, not manipulation of an accountant.

• Low usage during the first three weeks
• Very high usage during the last week

• High availability: Keeps services running despite failures.
• High latency: Means slow response times; it is not a benefit.
• Load balancing: Distributes traffic across resources but does not specifically address scaling resources up and down.

• Reviewing security objectives to ensure they support business goals.
• Ensuring security requirements are integrated consistently across business units.
• Coordinating security policies, risk management, controls, and awareness activities.

• Executive management: Provides direction, funding, and support, but usually does not manage day-to-day security integration.
• Board of directors: Provides governance and oversight, not operational security coordination.
• Steering committee: Helps coordinate and prioritize initiatives, but the CISO typically owns the overall security program and ensures its integration.

• SAML: Enables federated authentication and single sign-on between the IdP and SaaS providers.
• OAuth tokens: Allow delegated application access; OAuth is not primarily the first step for employee SSO.
• Password vaulting: Stores or autofills multiple passwords but does not eliminate the separate credentials or provide true federation.

• A — If there is no demand, there should be no production.

• B — Not all sales equal profit.

• C — Stocking up on inventory is bad for business.

• D — All costs, except materials, are considered fixed.

• E — Departments should operate at full capacity regardless of bottlenecks.