The Open Group OG0-091 Exam Actual Questions
TOGAF 9 Part 1 (Page 2 )

1. Download the updated VPN client configuration package from the Azure VPN gateway.
2. Remove or update the existing VPN client configuration on the Windows 10 workstation.
3. Install the new package and reconnect.

• What wipe does: A factory reset that erases all data, apps, and settings and returns the device to the OOBE. It removes the device from management and resets identity.
• Why not for this scenario: The goal is to repurpose the same device to a new user with Autopilot. Autopilot Reset keeps the device’s Azure AD/Intune identity and re-provisions the device for the next user without a full wipe.
• What Autopilot Reset does: Removes user data and apps but preserves device identity and management connection, then reapplies the Autopilot provisioning for the next user.
• When you’d use wipe instead: If you’re selling or permanently discarding the device, or you truly want to scrub all traces and start fresh without re-enrolling.

• SageMaker endpoint: Not required because the model is being used through Amazon Bedrock.
• SageMaker Model Registry: Used for managing SageMaker models, not for making a Bedrock custom model available.
• Grant access in Amazon Bedrock: IAM permissions may still be needed, but granting access alone does not provide the required inference capacity.

• A private IP address on the virtual network
• A public IP address associated with its IP configuration

• On-Demand: You pay by the hour with no long-term commitment. This is ideal for workloads that are infrequent or have highly variable usage. Since this job runs only 24 hours once per year, you pay only for those 24 hours, with no wasted upfront or long-term payments.
• Reserved Instances: Require a 1- or 3-year commitment and pay for capacity whether you use it or not. For a workload that runs just 24 hours a year, you’d be paying for most of the term unused, making it far less cost-efficient.
• Spot Instances: Can be interrupted whenever AWS needs capacity, which is unacceptable for an uninterruptible workload.
• Dedicated Instances: Generally more expensive and aimed at licensing or compliance requirements; not needed for this use case.

• Global Unicast: These are the IPv6 addresses that are globally routable on the Internet. They’re allocated by Regional Internet Registries (RIRs) and can be reached from anywhere with proper routing (similar to IPv4 public addresses). Example ranges include 2000::/3.

• Link-local: fe80::/10. Used only on the local link; not routable beyond the directly connected network.

• Unique Local Addresses (ULA): fc00::/7. Private addresses for internal use within an organization; not publicly routable on the Internet (like IPv4 private addresses).

• Multicast: ff00::/8. One-to-many addresses used for group communication, not unicast routing.

• Answer: A — EC2 Image Builder

• Why: EC2 Image Builder is AWS’s fully managed service designed to automate the creation, testing, and ongoing management of custom EC2 AMIs. It lets you build image pipelines that start from a base image, apply software/components, run tests, and publish/distribute the resulting AMIs across regions or accounts.

• How it works (high level):

• Why not the other options:

• Quick tip: Use EC2 Image Builder to reduce manual image maintenance and drift, and to enforce consistent, tested base images across environments.

• Batch processing, such as scheduled data transformations
• Streaming processing, such as continuously ingesting events

• Manipulating data with multiple languages: Mainly a benefit of Databricks and Spark.
• Real-time notebook collaboration: A workspace/notebook feature.
• Alerts for query failures: A Databricks SQL or job-monitoring feature.
• Distributing complex operations: Primarily a Spark compute capability.

• Short answer: The correct term is Anti-forensics (option D), not “Felony.”

• Why: The actions described—hiding files in slack space, changing file headers, placing suspicious files in executables, and altering metadata—are classic anti-forensics techniques. They’re used to hinder or obscure forensic analysis, not to label the act as a legal category.

• About the options:

• Note: The provided answer key lists B (Felony), which is misleading for this exam objective. The exam typically tests knowledge of forensics concepts, where anti-forensics is the correct category.

• The two correct options are:

• The two incorrect options:

• Port 515: LPD/LPR line-printer service
• Port 631: IPP — Internet Printing Protocol
• Port 9100: JetDirect/RAW printing, commonly used by network printers

• Linux machine: Linux could run these services, but the three printer-specific ports strongly indicate a printer.
• Router: Routers may use Telnet and HTTP, but normally would not expose ports 515, 631, and 9100 together.
• Windows machine: Windows can share printers, but this particular service combination is more characteristic of a network printer’s embedded operating system.

• Why this is correct: In Azure Virtual Desktop, user access to a host pool is controlled through App Groups. The default app group for a host pool publishes the full desktop, so adding members to that app group grants them sign-in and access to the desktop (and any RemoteApps in that group). This is the standard way to give users access to AVD resources.

• Why the other options are not correct:

• Practical steps (high level):

• Why: The data is unlabeled, so you can’t train a model with known input-output pairs. Unsupervised learning discovers structure in the data by grouping similar customers into clusters or tiers without labels.
• What it does: Clustering and segmentation (e.g., k-means, hierarchical clustering, DBSCAN, Gaussian mixtures) to form meaningful groups.
• Why the other options aren’t as suitable:

• Two VMs
• Distributed across two separate availability zones

• In Azure, the typical cost approach for pay-as-you-go VMs is an Operational Expenditure (OPEX) model. You’re billed for actual usage each month.
• The term “elastic expenditure model” isn’t a standard Azure cost category. Elasticity describes scaling capacity, not the billing category itself.
• So recommending the elastic expenditure model is not correct for this goal.

• The solution does not meet the goal. Answer: No (B).

• Pay-as-you-go aligns with OPEX because costs vary with usage.
• Elasticity is about scaling resources, which affects performance and capacity, not the fundamental cost model.

• Answer:

• Why:

• Why the other centers aren’t the right fit here:

• A Storage Gateway File Gateway provides an on-premises NFS/SMB file share that's backed by objects in S3. This is exactly what you need to migrate an NFS workload: applications continue using NFS, while the actual data moves to and is stored in S3.
• It can cache frequently accessed data locally for performance, while uploads go to an S3 bucket.
• Why the other options aren’t suitable:

• Correct answer: A
• What this is saying: You need to write a Transact-SQL query that uses REGEXP_SUBSTR to extract the ID from MessageText, and you should apply STRING_ESCAPE(MessageText, 'json') before calling REGEXP_SUBSTR.

• MessageText may contain JSON characters (quotes, backslashes, etc.). Escaping the JSON content first ensures the string you pass to the regex is safe and won’t confuse the regex engine.
• The pattern you apply with REGEXP_SUBSTR would then extract the first substring that matches your ID pattern from the (escaped) text.

• Example (conceptual):

• The question implies REGEXP_SUBSTR is available in this environment; some SQL Server and Fabric contexts don’t expose it natively in all versions. If REGEXP_SUBSTR isn’t available, you’d need an alternative approach (e.g., using built-in regex-like capabilities or CLR/UDFs).
• If you need the ID specifically from the first paragraph, you might first isolate the first paragraph and then apply REGEXP_SUBSTR, or compose a single pattern that anchors to the first paragraph.

• The correct answer is “Think and work holistically” (Option B).

• Focus on value: ensures outcomes matter to stakeholders, but isn’t specifically about end-to-end delivery.
• Optimize and automate: about efficiency and performance, not the holistic view.
• Collaborate and promote visibility: about teamwork and sharing information, not the end-to-end scope.

• Correct answer: B) Context window.

• Why: The context window is the number of tokens the foundation model can process in a single inference. It sets the maximum length of the combined input (prompt) and the model’s output. A larger context window allows more content to be included in one prompt.

• How to use: Check the FM’s context window value and ensure your prompt length plus the desired completion stays within that limit. If needed, summarize or split input across multiple prompts.

• Why the other options aren’t correct:

• Quick tip: Verify the specific FM’s context window for Bedrock, since different models have different token limits.

• Correct answer: Day 3 (Option B)

• Why: In Engagement Studio, when the program is paused, the prospects’ wait times are also paused and do not count down. They resume from the same point when the program restarts. Here, the prospect was at day 3 of a 5-day wait when paused, so they resume on day 3 after the 1-day pause.

• VMs without NGT: Not clearly a migration blocker on its own; NGT (Nutanix Guest Tools) status isn’t the typical gating factor for live migration during maintenance.
• VMs marked as an Agent: Not a standard, widely-known migration blocker; agents aren’t the typical reason a VM can’t be migrated.
• Memory Overcommitted VMs: While memory pressure can affect placement, memory overcommitment isn’t a fundamental reason a VM would be labeled non-migratable during maintenance.
• VMs with attached Volume Groups: This is the strongest candidate. A Volume Group is a set of volumes bound to a VM; moving the VM would entail relocating and reattaching those volumes, which can complicate or block live migration during maintenance.

• The target API uses HTTPS, so Mule must validate the server’s TLS certificate.
• The TLS configuration is set to None, meaning no custom truststore is configured.
• Mule therefore uses the JRE’s default truststore to determine whether the target certificate is trusted.
• If the issuing CA certificate is in that truststore, the TLS handshake can succeed.
• If it is absent—or the certificate is otherwise invalid—the request fails with a TLS/handshake error.

• Voice devices ? VLAN 10
• Data devices ? VLAN 20
• SVI for VLAN 10 ? 192.168.10.1
• SVI for VLAN 20 ? 192.168.20.1

• A: Describes a physical trunk interface, not an SVI.
• B: An SVI can provide management access, but that is not its primary definition here.
• D: SVI does not compensate for insufficient physical ports; it is a logical interface.

• Strongest encryption algorithms: Choose the strongest available encryption and integrity options, typically AES with the largest key size and a secure integrity algorithm.
• Encrypt all traffic: Select tunnel mode rather than transport mode. Tunnel mode encrypts the entire original IP packet, which is appropriate for a site-to-site VPN between branch networks.
• Secret-password authentication: Configure a pre-shared key (PSK) on both VPN concentrators. The key must match at both ends.

• Basic: Self-help only; no technical support or design assessment.
• Developer/Standard: Technical support, but generally not the full proactive architecture guidance required here.
• Professional Direct: Includes proactive guidance and architecture recommendations.
• Premier: Also supports this, but is not the minimum-cost option.

• Options:

• Answer: The correct choice is A (800-61r3).

• NIST SP 800-61 Rev. 3 is the dedicated guide for incident handling/response and reflects the latest guidance on the incident response lifecycle (preparation, detection/analysis, containment, eradication, recovery, post-incident activity).
• 800-61r2 is an older revision of the same incident response guide.
• 800-53 covers security and privacy controls, not a specific incident response standard.
• 800-171 focuses on protecting CUI in non-federal systems and networks, not incident response guidance.

• Answer: Data enhancement.

• Why: Augmenting gold-layer tables with an additional dataset is enriching or enhancing the existing data to support the ad-hoc analysis. The other options don’t capture the idea of adding external data to improve the dataset (ad-hoc improvements = tweaks, last-mile dashboarding = building dashboards, last-mile ETL = ETL steps at the end of the pipeline). In practice, this is often also called data enrichment.

• Answer: A) Clear the Windows event logs

• Windows event logs (System, Security, Application) are key forensic artifacts. If an attacker clears these logs, there’s no built-in local record of actions taken, making it harder for investigators to trace what happened.

• Modify the system time: may misalign timestamps but does not erase past events and can be easily detected.
• Alter log permissions: could prevent new log entries, but it doesn’t remove existing ones and can raise alarms due to permission changes.
• Reduce log retention settings: affects only future logs; it doesn’t wipe already recorded activity.

• In real environments, defenders mitigate this risk with tamper-evident, centralized logging (remote SIEM, write-once storage, log integrity checks) to preserve evidence even if a host is compromised.

• Drop violating frames
• Log or alert on the violation
• Shut down or restrict the port

• Load balancer: Distributes application traffic; it does not control switch MAC learning.
• IPS: May detect some network attacks but is not the primary control for switch MAC-table exhaustion.
• NGFW: Protects traffic crossing network boundaries, while MAC flooding occurs at the switching/LAN layer.

• As the project progresses, you gain information, refine requirements, and lock down baselines (scope, schedule, cost). This reduces overall risk and uncertainty because more is known and addressed.
• At the same time, changes become more costly over time. Later changes can affect already approved baselines, cause rework, impact the critical path, require more coordination, and incur penalties or delays, all of which raise the cost of making changes.

• Numerical flexibility: Adjusting the number of employees, such as using temporary, part-time or contract staff.
• Temporal flexibility: Varying when employees work, such as through flexitime, overtime or different working hours.
• Shift system flexibility: Changing work patterns or shift arrangements; it is not specifically about moving between tasks.

• A) configure matching hold and delay timers

• B) configure matching key-strings

• C) configure matching priority values

• D) configure unique virtual IP addresses

• The inference container image or built-in algorithm
• The location of model artifacts in Amazon S3
• IAM permissions through the execution role
• Optional environment variables and networking settings

1. Create AWS::SageMaker::Model
2. Create an AWS::SageMaker::EndpointConfig that references the model
3. Create AWS::SageMaker::Endpoint that references the endpoint configuration

• AWS::SageMaker::Endpoint hosts a model but does not define the model itself.
• AWS::SageMaker::NotebookInstance provides a development environment.
• AWS::SageMaker::Pipeline orchestrates ML workflow steps.

• Correct answer: only new data added to the eventhouse (option E).
• Why: When you enable OneLake availability for the eventhouse, OneLake starts syncing data going forward. It does not automatically backfill or copy over data that already exists in the eventhouse before the enablement.
• What that means in practice: Any data added to the eventhouse after you enable OneLake will appear in OneLake (and be visible from OneLake file explorer). Pre-existing data in the eventhouse stays there unless you perform a separate backfill/copy operation outside the standard OneLake enablement.
• How to verify: add a small new dataset to the eventhouse after enabling OneLake availability, then check OneLake to confirm the new dataset appears.

• Key difference: DirectQuery leaves data in the on-prem SQL Server and queries it live. That means every visual request can trigger online processing on the source, which can be slower and adds load on the on-prem system. In contrast, Import loads data into the Power BI data model, so visuals render from the in-memory engine (faster).

• Why that helps with the requirements:

• Why not A or B: Both rely on live data via DirectQuery, which contradicts the goal to minimize online processing and visuals performance.

• Why not D: It uses Import, but refreshing hourly adds unnecessary processing and complexity when daily refresh already satisfies currency needs.

• Each statement is evaluated as True (Yes) or False (No) independently.
• Key Azure facts to recall:

• Cross-account access is typically implemented with an IAM role. You create a role in the target account (where the resources live) and configure a trust policy that allows principals from the source account to assume that role.
• Users in the source account then assume the role (via Switch Role in the console or STS:AssumeRole) and receive temporary credentials with the role’s permissions to access the resources.

• IAM group: Groups exist inside a single account; they don’t grant cross-account access.
• IAM tag: Tags are metadata and do not grant access.
• IAM Access Analyzer: It analyzes and identifies public or cross-account access but does not grant access itself.

• Event | search "error"
• Event | where EventType == "error"
• search in (Event) "error"

• Answer: B — Improve employee training and awareness

• Why this is correct:

• Why the other options are less effective here:

• Quick practical note:

• Multi-pass wipe: Overwrites the drive’s existing data multiple times, making recovery much more difficult while preserving the drive’s functionality.
• Single-pass wipe: May be sufficient in some modern sanitization standards, but is presented here as less secure than multiple overwrites.
• Degaussing: Uses a strong magnetic field to disrupt data. It can render the drive unusable or unreliable, reducing its resale value.
• Pinning: Is not an appropriate data-sanitization method.

Why B works

• AWS KMS keys are Regional resources. A normal customer managed key in Region A cannot be used directly in Region B.
• A customer managed multi-Region KMS key (MRK) has related key replicas in both Regions. The replicas share key material and key ID, although each has a Regional ARN.
• With client-side encryption, the application encrypts the data before storing it in S3. Cross-Region replication then copies already-encrypted objects, so S3 does not need to decrypt and re-encrypt them with a different Regional key.

Why the other choices are weaker

• A and C: SSE-S3 uses Amazon-managed S3 keys, not the required customer managed KMS key.
• D: SSE-KMS can work only if the solution creates and configures the appropriate KMS key or multi-Region key replica in each Region. As written, it says to create a customer managed KMS key in each Region, which implies separate keys—not the same KMS key. Replication also requires additional KMS permissions and destination encryption configuration.

• Correct answer: A: The ITIL service value system (SVS).

• The SVS explains how all components (governance, the service value chain, practices, guiding principles, information and technology, partners and resources, and continual improvement) work together to enable value creation from demand to outcomes.

• B: The ITIL guiding principles describe aspirational guidance for decision-making, not how all components/activities interact.
• C: The four dimensions of service management explain areas to consider (organizations/people, information/technology, partners/suppliers, value streams/processes) but don’t describe the integrated system itself.
• D: A service relationship defines the relationship between provider and consumer, not the overall system of components and activities creating value.

• What the scenario tests: How monitoring paths on a Universal Forwarder (UF) behave when you deploy an app via the Deployment Server.
• How monitoring is configured: Log paths to monitor are defined in inputs.conf (within apps/local on the UF). Splunk on the UF merges inputs from all apps and local config.
• Key point: Deploying a new app that adds a monitor for a log file does not typically remove existing monitors. The UF will continue monitoring any previously configured paths and will add the new ones from the deployed app.

• Correct answer: C) /var/log/maillog and /var/log/messages.

• A recipient who already has a Microsoft account or an organizational account can authenticate by signing in.
• A recipient without a usable Microsoft identity may receive a one-time passcode by email.
• The passcode is sent to the same email address that was invited and is used to verify ownership of that address.

• Correct choices: A and D.

• Why not B, C, or E?

• B — Prompts and suggestions retained for 28 days
• C — User engagement data kept for two years

• The key distinction is between content data—your prompts, code context, and generated suggestions—and engagement data, such as usage activity.
• Do not confuse retention with training: enterprise Copilot data is generally not used to train GitHub’s models without appropriate authorization.
• For a current exam, verify the policy version cited by the exam provider. The key’s C is likely correct, but B should be treated cautiously and may no longer reflect the current policy.

• DNS????????????????

• ???????????

• ????????????????

• Cutover: The old system is replaced immediately. It may be fast, but any failure can cause significant disruption.
• Phased: The system is introduced in stages, which reduces implementation risk but may prolong the transition.
• Pilot: The system is first deployed to a limited group or location. This is useful for testing but does not necessarily minimize downtime for the entire organization.