UiPath UiPath-ADAv1 Exam Prep
UiPath Automation Developer Associate v1 (Page 16 )

• Data Cloud combines data from multiple systems.
• It resolves and organizes that data into a unified customer view.
• That unified view enables downstream actions such as personalized campaigns, segmentation, analytics, and activation.

• A = core platform value
• D = a resulting business use case or benefit

• Existing expected ROI: 15%
• New project ROI: 14%
• Cost of capital: 12%

• Project return = 14%
• Cost of capital = 12%
• It earns 2% more than the cost of capital, so it should increase shareholder value.

sql 
ALTER TABLE dbo.DimCustomer 
ADD CONSTRAINT PK_DimCustomer 
PRIMARY KEY NONCLUSTERED (CustomerKey) 
NOT ENFORCED;

1. ALTER TABLE dbo.DimCustomer
2. ADD CONSTRAINT PK_DimCustomer PRIMARY KEY NONCLUSTERED (CustomerKey)
3. NOT ENFORCED

• Disable high concurrency: This changes session-sharing behavior but does not provide dedicated compute or true workload separation.
• Modify the number of executors: Adjusts resources within a Spark job; it does not isolate bronze and silver processes.
• Set the default environment: Controls libraries and runtime configuration, not compute isolation.

• Controlar o fluxo de dados entre S3 e SageMaker;
• Aplicar regras de segurança por meio da VPC;
• Reduzir a exposição dos dados;
• Permitir acesso privado ao bucket do S3.

• Amazon Inspector: avalia vulnerabilidades, mas não gerencia o fluxo de dados.
• Amazon Macie: ajuda a descobrir e proteger dados sensíveis no S3, mas não cria a conexão com o SageMaker.
• S3 Glacier Deep Archive: é uma classe de armazenamento para arquivamento, não uma solução de conectividade.

• Design Studio > Emails ? create an email-template folder
• Design Studio > Landing Pages ? create a landing-page-template folder
• Add the relevant assets to each folder
• Right-click the folder and choose Share Folder
• Select the destination workspaces

• Internal hostnames and subdomains
• Network structure and naming conventions
• Servers and services
• Relationships between systems

• Determining ISP-assigned address space: Usually involves external registration and DNS information, not internal host discovery.
• Bypassing DNS sinkholing: Would require evidence that malicious DNS requests avoided redirection.
• Initial access: DNS queries alone do not show that the attacker gained access.
• Exfiltrating data: DNS tunneling can do this, but the snippet would typically show encoded or unusually long DNS queries.

• Accept: Acknowledges the risk without taking additional action.
• Transfer: Shifts the risk or financial impact to another party, such as an insurer.
• Mitigate: Reduces the likelihood or impact through controls like patching, MFA, or segmentation.
• Avoid: Eliminates the activity that creates the risk.

• B. Versioned configuration files — Infrastructure is defined in machine-readable files and tracked in version control, allowing repeatable provisioning and change history.
• D. Docker files — Assuming “Doctor files” is a typo for Dockerfiles, a Dockerfile declaratively defines how to build a container image and is commonly considered infrastructure/configuration as code.

• A. Cloned virtual machine images — These are prebuilt infrastructure artifacts, but cloning an image is not itself a code-based infrastructure definition.
• C. Change management database records — A CMDB records information about infrastructure; it does not define or provision that infrastructure.

• A static IP gives the surveillance system a predictable local address, so users can reliably reach it on the LAN.
• However, a static IP does not block internet-based login attempts. If the router exposes the device through port forwarding, attackers could still reach it.
• Port mapping normally exposes an internal service externally, so A is a poor choice as written.
• Subnetting alone also does not block traffic; it would require routing/firewall rules.

• A class/teacher fact should contain one row per Class ID. It can support the count of classes and contain attributes such as Teacher First Name and Period Number.
• An attendance fact should contain one row per attendance event, such as Class ID + student + date. It supports attendance counts by day and monthly averages.

• Teacher First Name ? Teacher fact
• Period Number ? Attendance fact

• IaaS: você gerencia a VM e o sistema operacional.
• PaaS: o Azure gerencia a infraestrutura; você se concentra no aplicativo.

• NAT traversal: Helps WAN Edge, vSmart, and vManage devices discover how to reach one another through NAT.
• Initial orchestration: Authenticates and introduces devices when they first join the SD-WAN fabric.
• Connection brokering: Provides information that allows devices to form their required control connections, after which the vBond is generally not in the data path.

• WAN Edge: Forwards user traffic and forms secure tunnels.
• vSmart: Controls the overlay control plane and distributes routes and policies.
• vManage: Provides centralized management, configuration, and monitoring.

• HTTPS: Secure web traffic, not general command-line server administration.
• SNMPv3: Secure network monitoring and management, not interactive server login.
• RDP: Provides graphical remote desktop access. It can be secure, but it is not the direct replacement for Telnet in this scenario.
• SMTP: Used to send email.

• httprint fingerprints Web servers by analyzing their HTTP responses. It can help identify the Web server type and sometimes its version, even when the banner has been modified or hidden.
• Wget is mainly used to download files or Web content.
• WinSSLMiM is associated with SSL man-in-the-middle testing.
• Whisker is an older Web-server vulnerability assessment tool, especially associated with IIS, rather than the expected banner-grabbing tool here.

• MFA: Protects sign-in and authentication.
• Azure Key Vault: Protects deployment secrets and credentials.
• Answer: No (B).

• A script of cloud CLI commands: IaC because the commands can be saved, reviewed, versioned, and rerun consistently.
• Manually run curl commands: Not necessarily IaC; they are manual actions unless organized into an automated script.
• A sequence of REST requests passed to an API: Could represent automation, but the wording does not explicitly say they are stored and executed as reusable code.
• Commands entered into a cloud console: Manual operation, not IaC.

• Crowd-sourced evaluation: Requires recruiting and managing many evaluators.
• Human-worker evaluation: Provides human judgment but requires coordination, labeling instructions, and quality control.
• RLHF: Is a training and alignment process, not simply a low-overhead model comparison method.
• Automatic model evaluation: Quickly evaluates outputs using predefined toxicity or quality metrics with minimal manual effort.

• Microsoft manages the physical datacenter, hardware, and virtualization.
• You manage the virtual machine’s operating system, installed software, configuration, and data.
• You choose the VM size, storage, networking, and scaling options.

• SaaS: You consume a complete application managed by the provider, such as Microsoft 365.
• PaaS: You deploy applications without managing the underlying operating system or VM infrastructure, such as Azure App Service.

• Endpoint Manager: manages hosts and sensor-related settings.
• Falcon Investigator: supports investigation and analysis, but does not necessarily grant RTR access.
• Remediation Manager: handles remediation-related actions rather than interactive host access.

• Constrained VMs: VMs whose workloads are experiencing resource pressure, such as insufficient CPU or memory. They may need additional resources or optimization.
• Overprovisioned VMs: VMs allocated more CPU, memory, or storage than their workloads require. Their resources may be reclaimed or reduced.

• Underprovisioned VMs: This is not the predefined view identified for this report question.
• Zombie VMs: These are typically inactive or unused VMs and are useful for cleanup, but they are not the two views specifically intended here to identify inefficient resource allocation.

• Amazon EC2 instances — ???????? ?? ?? ??????? CPU, memory ??? instance size ???????? ???????
• AWS Lambda functions — memory configuration ?????????? ???????
• Amazon EBS volumes — volume type ?? size optimize ???? ???????
• ??????? ECS workloads — resource configuration ? cost optimization-?? ???????

• Memory ? compute usage ?????????? ???? custom code ????? ???? development ? maintenance ??????
• Cost allocation tags ???? ????? ??? ?????? ???? ??????? ???; inefficient resource ??????? ?? recommendation ???? ???
• CloudTrail resource ???? ?? API activity ??????, resource utilization ????

• miami.weyland.com requires a custom domain, which is not available in the Free tier.
• Two instances require a tier that supports scaling out. Standard supports multiple instances.
• SSL support is available in Standard.
• 12 GB of storage exceeds the storage limit of the Basic tier in the older Azure pricing model used by this question.
• Standard provides sufficient storage and features while being cheaper than higher tiers—though higher tiers are not listed here.

• Free/Shared: insufficient features for custom domains, SSL, and multiple instances.
• Basic: supports some production features, but its storage capacity is insufficient for the required 12 GB.

1. Write a structured log entry to CloudWatch Logs containing:

1. Create a CloudWatch Logs metric filter that:

text 
ApiRequests 
Operation=GetOrders 
ResponseCode=500 
Version=2.4.0

• B is incorrect: CloudWatch Logs Insights queries analyze logs but do not directly publish metrics in this manner.
• C is incorrect: ALB access logs do not contain arbitrary Lambda response metadata as custom fields.
• D is incorrect: X-Ray traces and insights are not the appropriate mechanism for creating these custom, dimensioned application metrics.

• Managerial: policies, standards, risk management, governance
• Operational: procedures carried out by people, such as training, incident response, and backups
• Technical: firewalls, encryption, access-control systems
• Physical: locks, guards, cameras

• Annual interest payments net of tax relief (A): future cash outflows for the issuer.
• Redemption value (B): the final cash outflow when the bond is redeemed.
• Market value now (C): the cash proceeds received now, acting as the initial cash flow in the IRR calculation.

• A. Adjust resolution: Incorrect because an incompatible resolution usually causes no display, distortion, or an unsupported-mode message—not intermittent flickering.
• B. Swap the HDMI cable: Correct. Replacing the common, easily tested component is the appropriate troubleshooting step.
• C. Replace the projector: Incorrect because the issue also occurs with a monitor.
• D. Configure refresh rate: A mismatched refresh rate can cause visual problems, but the repeated flicker across displays points more strongly to the cable.

• Three DHCP scopes: Each VLAN has its own IPv4 subnet. DHCP scopes are subnet-specific, so create one scope for:

• Two DHCP relays: DHCP client discovery begins as a broadcast, and broadcasts do not cross routers or VLAN boundaries. Therefore, configure a DHCP relay on the router or Layer 3 switch interface for each client VLAN.

• Data owners: Decide who should have access and approve the access rules.
• Business process owners: May help define business requirements, but normally do not enforce technical permissions.
• Security steering committee: Provides governance and direction; it does not manage individual access rights.
• Security administrators: Apply and enforce the approved access controls.

• Guest access: Controls external users invited into your teams as guests. It is not the primary setting for restricting federated communication by domain.
• Messaging policy: Controls messaging features, such as chat or message editing, rather than which organizations users can communicate with.
• Org-wide Teams settings: Contains broad Teams-wide configuration, but domain-based external communication is configured under External access.

DAX 
Previous Year Sales = 
CALCULATE( 
    [Total Sales], 
    PARALLELPERIOD('DATE'[Month], -1, YEAR) 
)

• CALCULATE evaluates [Total Sales] after modifying the filter context.
• PARALLELPERIOD shifts the current date period. -1 moves it backward, and YEAR specifies a one-year shift.
• 'DATE'[Month] is the date column used for the time calculation. In a proper date table, this should be a real date column or an appropriate calendar column—not merely text such as "January".

• Crash cart: Provides local physical access, not remote access.
• Jump box: A secured intermediary used to reach devices over the normal network; it may be inaccessible if the appliance has not booted.
• Secure Shell (SSH): Requires the device’s operating system and network services to be running properly.

• Domain controllers, because the requirement specifically excludes them. However, note that both member servers and domain controllers run Windows Server, so OS targeting alone cannot distinguish them unless the targeting option allows selecting the relevant server role/version. In the usual exam interpretation, target the applicable server OS category.
• Client computers, because they run a client Windows operating system.

• Domain: Targets membership in a domain, not the computer’s operating-system type.
• Security Group: Would require creating and maintaining a group containing all member servers, increasing administrative effort.
• Environment Variable: Not designed to reliably identify member servers.

• Install unauthorized or unsupported software
• Access features blocked by the manufacturer or operating system
• Customize system behavior beyond normal settings

• Red team: Simulates attackers and tests exploitability.
• Blue team: Defends, monitors, detects, and responds to attacks.
• Purple team: Combines red- and blue-team activities to improve cooperation and defenses.
• White team: Manages and oversees the rules, scope, and authorization of the exercise.

• A. Remove rows where Sales[Status] is Canceled

• E. Remove Sales[Canceled Date]

• B: Removing Sales_Date would remove information users need—the date portion.
• C: Changing Delivery_Time to Integer could alter its meaning or precision and is not necessarily safe.
• D: Splitting the date/time column creates additional columns rather than simply removing unnecessary data.

• Deficiency found before patient use: usually does not require an adverse-event report because no patient exposure occurred.
• Event caused solely by the patient’s condition: may not be reportable if the device did not contribute.
• Malfunction protection operated correctly: generally exempt when the device’s safety mechanism worked as intended and prevented harm.

• A business-hours greeting
• An after-hours greeting
• A holiday greeting

• Weekday evenings/nights
• Saturdays and Sundays

1. Auto attendant 1

1. Auto attendant 2

• A — Technical review by business owner: A business owner may approve the business impact, but a technical review is normally performed by technical personnel.
• C — Cost-benefit analysis after implementation: Cost-benefit analysis should occur before implementation to support the approval decision.
• D — Business continuity testing: This can be appropriate for major changes, but it is primarily part of business continuity and disaster recovery planning—not a universal change-management activity.

• Static IP address: Not needed if the workstation already has network connectivity.
• Subnet mask: Incorrect subnetting would usually prevent local communication, including pinging the server.
• Default gateway: Primarily affects communication outside the local network; it does not normally prevent finding an internal domain controller.

• Self-signed certificate — Causes a certificate trust warning, not incorrect name resolution.
• Nameserver record — A DNS record problem would usually affect multiple users, unless only this computer uses a different DNS server.
• IP helper — Relays certain network services, commonly DHCP, between subnets; it does not normally determine website name resolution.

• True positive: The scan reports a vulnerability that really exists.
• False positive: The scan reports a vulnerability that does not exist.
• True negative: The scan correctly reports no vulnerability.
• False negative: The scan fails to detect a vulnerability that is actually present.

• D — Managers focus on keeping costs low in the short term to maximise profits.

• E — Managers are given incentives to meet or undercut budgets.

• F — Managers delegate responsibility simply to reduce their workload.

• Espionage: Stealing confidential information, often for a competitor or government.
• Data exfiltration: Unauthorized transfer of data outside the organization. This could occur, but the question focuses on using unapproved access methods.
• Nation-state attack: An attack sponsored or conducted by a government.
• Shadow IT: Employees using technology or access methods outside the organization’s approved security controls.

1. Open the Microsoft Entra Connect wizard.
2. Select Configure.
3. Choose Customize synchronization options.
4. Authenticate when prompted.
5. On the Domain and OU filtering page, select:

1. Complete the wizard.

• Start-ADSyncSyncCycle only starts synchronization; it does not change which OUs are included.
• Manage federation configures federation settings, which are unrelated to OU filtering.
• Add-ADSyncConnectorAttributeInclusion concerns connector attributes, not selecting additional OUs for synchronization.

1. Discovery tries the SSH probe first.
2. SSH fails.
3. Discovery tries SNMP, which succeeds.
4. Discovery records SNMP as the preferred service for that IP.
5. Future discoveries try SNMP first.

• Classification identifies the type of device, such as a server, router, or printer.
• Credential affinity remembers which credentials work for a device.
• MID Server affinity associates a device or network with a particular MID Server.
• IP service affinity specifically controls the preferred discovery protocol or service.

• netstat -tuln can show listening TCP ports.
• If the web service is not listening, or is bound only to 127.0.0.1, remote browsers cannot connect even though the server responds to ping.

• traceroute: Tests the path to the server, but ping already confirms basic reachability.
• tcpdump: Useful for detailed packet analysis, but it is more appropriate after checking whether a service is listening.
• arp: Helps troubleshoot local IP-to-MAC resolution, not an application-layer web connection.

• A — Tables
• B — Named file formats
• C — Schemas
• E — Databases

Why these are correct

• Tables: Can be cloned using CREATE TABLE ... CLONE. The clone initially uses zero-copy cloning, so storage is shared until changes are made.
• Named file formats: Can be cloned as database objects, preserving the file-format definition.
• Schemas: A schema and its eligible objects can be cloned.
• Databases: A database and its eligible schemas and objects can be cloned.

Why the others are incorrect

• Shares: A share is an account-level data-sharing object, not a normal cloneable database object.
• Users: Users are security principals and cannot be cloned with CLONE.

• Reduce the training data: Usually makes overfitting worse.
• Add hyperparameters: Hyperparameters already control training; simply adding them does not solve the problem. Proper tuning could help, but that is not what the option states.
• Increase training time: More training can worsen overfitting if the model is already memorizing the training data.

• A — .gitignore: Controls Git tracking; it does not configure Copilot exclusions.
• B — copilot.ignore: This is not the standard GitHub Copilot Business exclusion mechanism.
• D — Renaming files: Adding _no_copilot has no recognized effect.