UiPath UiPath-ADAv1 Exam Prep
UiPath Automation Developer Associate v1 (Page 27 )

• A — Correct: Flow Builder is declarative and visual, so administrators and other non-developers can participate in designing and improving business processes without writing Apex.
• D — Correct: Flow Builder provides visual debugging tools, allowing an admin to test paths, inspect variable values, and identify where a specific business case fails.
• E — Correct: A flow’s visual structure documents the logic and makes later maintenance easier than reading and updating custom Apex code.

• B — Incorrect: Flow debugging does not attach a debugger to live customer sessions. The admin uses Flow Builder’s debug functionality with test inputs; this is not live-session debugging and should not be used to monitor real customer transactions.

• CCTV system — Detective control: Cameras monitor and record activity, helping identify or investigate security incidents after—or while—they occur.
• Signs about being filmed — Deterrent control: The signs discourage people from attempting unauthorized or criminal activity because they know surveillance is present.

• Preventive: Stops an incident from occurring, such as a lock or access-control system.
• Corrective: Restores systems after an incident.
• Directive: Instructs people to behave in a certain way, such as a security policy.
• Compensating: Provides an alternative control when the preferred control cannot be implemented.

• A — Securing information assets: This is the responsibility of management and operational/security teams.
• B — Validating protection: Correct. The auditor checks whether controls—such as access restrictions, encryption, retention, and handling procedures—match the asset’s classification.
• C — Ensuring alignment with regulations: Management and legal/compliance functions typically establish classification requirements; the auditor may assess compliance but does not primarily define alignment.
• D — Defining classification levels: This is a management responsibility based on business needs, risk, and regulatory obligations.

• Open or insecure ports
• Enabled legacy or insecure protocols
• Known vulnerabilities and misconfigurations
• Weak services and outdated software

• curl tests web requests and HTTP-based services.
• Wireshark captures and analyzes network traffic; it does not normally scan servers for weaknesses.
• netcat can test connectivity to individual ports and sometimes grab service banners, but it is not a comprehensive vulnerability scanner.

• VLAN 10 for data
• VLAN 20 for voice

• A: Describes physical trunking or logical switch ports, not an SVI.
• B: An SVI can provide management access, but that is only one use—not the best description here.
• D: SVI use is not related to running out of physical ports.

• Future costs — Only costs occurring in the future can be affected by the investment decision. Past costs are sunk and irrelevant.
• Incremental costs — These are additional costs caused by choosing the investment. They are relevant because they differ between alternatives.
• Cash flows — Capital investment decisions are based on future cash inflows and outflows, usually discounted to present value.

• Committed costs have already been agreed or incurred and generally cannot be changed by the decision.
• Unavoidable costs will arise regardless of which option is selected, so they do not affect the choice.

• Vulnerability scanner: Finds technical weaknesses in systems, applications, or devices. It does not usually analyze the entire supply chain.
• Penetration test: Simulates attacks against a defined target to identify exploitable weaknesses. Its scope is narrower.
• SCAP (Security Content Automation Protocol): Provides standardized formats and methods for automating security configuration and vulnerability checks, rather than mapping the full supply chain.

• Install unauthorized or unapproved applications
• Access system areas normally restricted
• Add features unavailable in the default software
• Modify the device’s operating system

• SQL injection (SQLi): Attacks databases by inserting malicious SQL commands.
• Cross-site scripting (XSS): Injects malicious scripts into web pages viewed by users.
• Sideloading: Installs an application from outside the official app store, but it does not necessarily remove the phone’s operating-system restrictions.

• Create and manage approved IT services as products
• Control which users can deploy those products
• Apply governance, permissions, and constraints
• Use and manage infrastructure-as-code templates, such as AWS CloudFormation templates

• AWS Resource Explorer: Helps find and browse AWS resources; it does not govern IaC deployments.
• AWS Organizations: Manages accounts, consolidated billing, and organization-wide policies.
• AWS Systems Manager: Provides operational management, such as patching, automation, and parameter storage, but it is not primarily used to catalog and govern IaC-based service deployments.

• Low usage during the first three weeks
• Very high usage during the last week

• High availability: Keeps services running despite failures.
• High latency: Means slow response times; it is not a benefit.
• Load balancing: Distributes traffic across resources but does not specifically address scaling resources up and down.

Statement 1 — Correct

Statement 2 — Correct

• A: It allows for branching and merging...

• C: It allows multiple engineers to work against the same code and configuration files and manage differences and conflicts.

• B: Build automation and infrastructure provisioning are handled by CI/CD and automation tools, not by version control alone.
• D: User Stories and backlogs are managed by project-management tools.
• E: Version control stores and tracks code, but it does not itself ensure that developers write effective unit tests.

• GPU: A failure may cause no video output, but the PC usually still powers on.
• RAM: Can prevent booting or produce error beeps, but fans and power indicators generally work.
• CPU: Can prevent startup or booting, but it usually does not cause a completely lifeless system.

• BCP: Maintains essential business operations during and after disruption. It is broader than IT recovery, but the question focuses on restoring the destroyed data center.
• Communication plan: Defines how the organization communicates with staff, the public, and other stakeholders.
• IRP: Handles security incidents such as malware, unauthorized access, or data breaches—not physical disaster recovery.

• Writing with Apache Spark, typically as Delta tables.
• Reading with Apache Spark for processing and analysis.
• Reading with T-SQL through the lakehouse’s automatically generated SQL analytics endpoint.
• Reading with KQL through Fabric’s query capabilities that can access lakehouse data.

• Eventhouse: Optimized for real-time and KQL workloads, but it is not the natural destination for Spark-based writes or general lakehouse storage.
• Datamart: Intended mainly for relational analytics and Power BI; it is not designed for Spark-based data ingestion.
• Warehouse: Primarily T-SQL-based and structured. It does not provide the same native Spark write experience or flexibility for semi-structured data.

• Data loss prevention (DLP): Helps detect or prevent unauthorized data transfers, but does not directly protect data on a stolen, powered-off laptop.
• Operating system hardening: Reduces vulnerabilities and attack surface, but does not adequately protect stored data if the device is stolen.
• Boot security: Helps prevent unauthorized operating systems or boot media from loading. It supports device security but is not the primary solution for protecting the data itself.

1. Convert text and images into numerical embeddings.
2. Store or compare those embeddings.
3. Retrieve the most semantically similar items.

• Embedding model: Best for similarity search and retrieval.
• Generation model: Best for producing new text or other content from multimodal input.

kusto 
Event 
| summarize make_set(EventID) by Computer

• summarize groups records.
• by Computer creates one result row per virtual machine.
• make_set(EventID) returns an array containing unique event IDs for that computer.

kusto 
| summarize make_list(EventID) by Computer

yaml 
clusterIP: None

• CronJob: Runs Jobs on a schedule and normally does not need stable networking.
• Deployment: Manages interchangeable, stateless replicas and usually uses a regular Service.
• DaemonSet: Runs a Pod on selected nodes but does not inherently require stable Pod identities.

• Periodic vulnerability assessments: Identify technical weaknesses but do not establish governance or ensure risks are managed.
• Established information security metrics: Help measure performance and report status, but measurement alone does not make governance effective.
• Advanced security technologies: Support security operations, but governance is primarily about direction, accountability, decision-making, and alignment with business objectives.

• Accept: Acknowledges the risk without taking additional action.
• Transfer: Shifts the risk or financial impact to another party, such as an insurer.
• Mitigate: Reduces the likelihood or impact through controls like patching, MFA, or segmentation.
• Avoid: Eliminates the activity that creates the risk.

• Additional running costs: $800
• Less depreciation: $300

• The $100 reduction in fixed production overhead absorbed is only an accounting reallocation. It does not represent an actual saving in total fixed overhead.

• Determining ISP-assigned address space: Usually involves public reconnaissance, such as WHOIS or regional Internet registry information.
• Bypassing DNS sinkholing: Would require evidence that malicious domains are resolving outside the organization’s sinkhole controls.
• Achieving initial access: DNS log entries alone do not demonstrate compromise or entry.
• Exfiltrating data: DNS tunneling generally involves repeated queries containing encoded or unusually long data, not merely internal host discovery.

• Each team’s Bedrock workflow uses a separate IAM service role.
• The role’s Amazon S3 permissions can be limited to only that team’s customer folder or objects.
• This enforces least privilege and prevents one team’s Bedrock application from accessing another team’s data.
• Access is enforced by AWS permissions, not by asking users to provide a customer name in each request.

• A single role with broad S3 access does not provide team-level isolation.
• Asking teams to specify a customer name is not an access-control mechanism.
• Redacting data does not prevent unauthorized access.
• A bucket policy alone is insufficient unless it explicitly enforces the required team-role restrictions.

• Secret scope: A named container that groups related secrets and defines access permissions. Example: finance-prod.
• Secret key: The name of an individual secret stored inside that scope. Example: db-password.

text 
Scope: finance-prod 
  Key: db-username 
  Key: db-password

python 
dbutils.secrets.get( 
    scope="finance-prod", 
    key="db-password" 
)

• staff use the new system;
• transactions and reports are checked;
• problems are corrected;
• feedback is collected.

• Phased changeover: different parts or functions are introduced in stages, often according to a planned sequence.
• Pilot changeover: one representative department, branch or group acts as a test site before wider implementation.
• Parallel changeover: old and new systems operate at the same time.
• Direct changeover: the old system is stopped and the new one starts immediately.

1. Which host originated the infection

1. Which remaining hosts are infected

• A script of cloud CLI commands: IaC because the commands can be saved, reviewed, versioned, and rerun consistently.
• Manually run curl commands: Not necessarily IaC; they are manual actions unless organized into an automated script.
• A sequence of REST requests passed to an API: Could represent automation, but the wording does not explicitly say they are stored and executed as reusable code.
• Commands entered into a cloud console: Manual operation, not IaC.

• A — Correct: Identify the data required by Salesforce, its dependencies, and how it should be validated. Verification scripts help confirm record counts, relationships, field mappings, and data integrity after migration.
• D — Correct: Use a full sandbox and perform trial migrations using realistic—or appropriately masked—legacy data. This exposes transformation, volume, dependency, and integration issues before production cutover.
• B — Less appropriate: Phased user migration and parallel operation primarily address user adoption and rollout risk, not the technical risks of data migration.
• C — Less appropriate: Although sandbox testing and integration testing are valuable, the option emphasizes test-data generation rather than validating the migration with representative legacy data. “A full sandbox for all systems” may also be impractical.

• Disaster recovery backups
• Long-term backup retention
• Data archiving that still needs occasional access

• Multi-Regional Storage: Intended for frequently accessed data needing broad geographic availability; it costs more.
• Regional Storage: Suitable for frequently accessed data within one region.
• Nearline Storage: Intended for data accessed roughly once per month, such as monthly backups.
• Coldline Storage: Better fit for backups accessed only during a disaster or occasional recovery event.

• Active-active routers: Provide redundant Internet connections/devices. Both can operate, so traffic can fail over or be load-balanced.
• Active-active firewalls: Avoid a single firewall becoming a failure point while maintaining security inspection.
• Load balancers: Distribute requests across multiple web servers. If one server fails, traffic can go to the other.
• Redundant power supplies: A server with separate power supplies should connect to independent power sources or circuits.
• UPS A and UPS B: Provide backup power and redundancy. Ideally, each power supply is connected to a different UPS.
• SONET ring: A ring topology provides alternate paths if a fiber link or segment fails.

• A. IDS attack signatures: An IDS primarily detects suspicious network activity; it is not the best control for scanning uploaded documents for malware.
• C. Load balancer: Distributes traffic among servers and improves availability, but does not inspect files for malware.
• D. WAF: Protects web applications against attacks such as SQL injection and command injection. It may help secure the upload function, but malware scanning is the key requirement here.

• SharePoint search: Finds documents based on search terms, but it does not reliably identify every 32-character account number for DLP enforcement.
• A hunting query in Microsoft 365 Defender: Used for security investigations, not for defining sensitive content in a DLP policy.
• Azure Information Protection: Uses classification and labeling; it does not automatically identify this specific account-number pattern unless configured with a matching sensitive information type.
• RegEx pattern matching: Best suited for structured identifiers with a known format, such as account numbers, employee IDs, or policy numbers.

1. Get Data > Folder

1. Expand the Attributes column

1. Remove the Content column

• Folder connector: lists files and their metadata, but also includes a Content binary column.
• Combine Files: processes and combines the actual CSV contents, which is explicitly disallowed here.

• File1.png — Yes: User1 can apply Label1 with the Microsoft Purview Information Protection client. The client supports labeling image files such as .png in this scenario.

• Folder2 — No: Folder2 is the root folder. The client does not allow labeling the root folder itself. Although the client can label ordinary folders, selecting one applies the label to existing files and subfolders—not automatically to future files.

• File1.docx — Yes: .docx is a supported Microsoft Word file type, so User1 can apply Label1 to it.

• D — Managers focus on keeping costs low in the short term to maximise profits.

• E — Managers are given incentives to meet or undercut budgets.

• F — Managers delegate responsibility simply to reduce their workload.

• Continuous deployment: Automates software releases; it does not specifically test input handling.
• Static code analysis: Examines source or compiled code without executing it. It can find coding flaws but does not directly stress the application with malformed inputs.
• Manual peer review: Developers inspect code or design manually. Useful, but not the best practice specifically for testing how a live product handles invalid input.

• Reviewing security policies and standards checks whether controls are documented, not whether they work.
• Reviewing security logs may show that monitoring is occurring, but does not directly establish that preventive controls are effective.
• Analyzing technical security practices is broad and may assess implementation, but it is less objective than an actual controlled attack.

• Design/compliance effectiveness: policies, standards, and procedures
• Operational effectiveness: logs, records, and evidence that controls operate
• Technical security effectiveness: penetration testing or vulnerability testing

• Accept: Acknowledging the risk without taking additional action.
• Transfer: Shifting the risk’s impact to a third party, such as through insurance or outsourcing.
• Mitigate: Reducing the likelihood or impact of the risk through security controls.
• Avoid: Eliminating the activity or process that creates the risk.

• Virtual machine disks
• Databases
• Storage accounts
• File systems

• Site-to-site VPN: protects data moving between networks
• HTTPS: protects data moving between a client and website
• Encrypted email: generally protects the message while being transmitted

• At rest = stored data
• In transit = moving data
• In use = data currently being processed by a system

• Business
• People
• Governance
• Platform
• Security
• Operations

• Cloud financial management
• Portfolio management
• Data governance
• Risk management
• Compliance

• You can configure different pre-shared keys for different device groups.
• All cameras could use one key.
• All scanners could use another key.
• Each key can be associated with an appropriate role or access policy.

• Owner, Contributor, and Network Contributor provide sufficient management permissions.
• Reader can view Traffic Analytics data but cannot enable or configure it.

• Cloud architecture
• Data architecture
• Platform engineering
• Data engineering
• Provisioning and modernization

• Data protection is associated mainly with security and risk management.
• Data governance belongs to the governance perspective.
• Data science is not an AWS CAF capability.

• The requirement is to obtain an assessment of the Azure environment’s design.
• The proposed solution is the Premier support plan.
• Premier can provide this type of guidance, but it is a higher-tier, more expensive option.
• The question specifically says to keep costs to a minimum. A lower tier—typically Professional Direct in the support-plan model used by this question—provides architectural/design guidance.

• The servers are powered on.
• The network is functioning.
• Devices can still reach the server network.

• ARP poisoning: Redirects or intercepts local network traffic; it usually affects communication paths rather than overwhelming a service.
• Jamming: Disrupts wireless or radio signals. It would not fit a system that remains accessible from devices on the server network.
• Kerberoasting: Attempts to crack service-account credentials from Kerberos tickets; it does not normally cause an immediate outage.

• Prevention costs – costs incurred to stop defects occurring, such as staff training, quality planning and supplier evaluation.
• Appraisal costs – costs of checking whether products meet standards, such as inspection, testing and quality audits.
• Internal failure costs – costs of defects found before delivery to customers, such as scrap, rework and retesting.
• External failure costs – costs of defects found after delivery, such as warranty claims, returns, complaints and product recalls.

• A — If there is no demand, there should be no production.

• B — Not all sales equal profit.

• C — Stocking up on inventory is bad for business.

• D — All costs, except materials, are considered fixed.

• E — Departments should operate at full capacity regardless of bottlenecks.