US Green Building Council LEED-AP-BD-C Exam Prep
LEED AP Building Design + Construction (Page 33 )

• STP elects the switch with the lowest Bridge ID as the root bridge.
• The Bridge ID consists mainly of bridge priority + MAC address.
• If multiple switches have the same priority, the switch with the lower MAC address is preferred.
• STP bridge priority values are configured in increments of 4096, such as 0, 4096, 8192, and so on. 32768 is the standard default value.

• Match found: ServiceNow updates the existing target record.
• No match found: ServiceNow normally creates a new target record.
• No Transform Map is created or deleted based on whether a match is found.

• Dark web: A place where leaked credentials may be sold or shared, not usually the original source.
• Threat feeds: Collections of intelligence about threats, not a typical leakage source.
• State actors: A type of attacker, not an accidental corporate disclosure source.
• Vulnerability databases: Track known vulnerabilities, rather than leaked credentials.

• C — Some risks cannot be eliminated.

• D — Accepting residual risk does not imply recklessness.

• E — Most companies in this industry will say something similar.

1. Create a temporary Onboarding OU.
2. Move the new account into it.
3. Move the restrictive SCPs from the organization root to the Production OU.
4. Allow the account to update AWS Config.
5. Move the account into Production after onboarding.

• An SCP attached at the organization root applies to every account and OU beneath it.
• An SCP attached to the Production OU applies only to accounts in that OU.
• Therefore, moving the restrictive SCP from the root to Production temporarily exempts the onboarding account without weakening the policies for existing production accounts.
• Once onboarding is complete, moving the account into Production subjects it to the normal restrictions.

• A: Knowledge of IT platforms, networks, and methodologies — Useful technical knowledge, but the CISO does not need to be the deepest technical expert.
• C: Regulatory and project management knowledge — Important, but compliance and projects must still support the organization’s broader needs.
• D: Managing people and resources — Essential for execution, but effective management of the wrong security priorities will not produce good results.

• Business
• People
• Governance
• Platform
• Security
• Operations

• Sustainability
• Performance efficiency
• Reliability

1. Version 1.0.0.0 — original published version
2. Version 2.0.0.0 — newly created and published version
3. Version 3.0.0.0 — new version created when version 1 is restored

• Deploy five individual VMs: This does not create a VM scale set.
• Modify Availability Zones or Size settings: These actions do not create the required scale set and add unnecessary steps.
• VM orchestration mode: This is Flexible orchestration, intended for more individually managed VMs and mixed configurations. It is not the best choice for a straightforward group of identical instances.

• Accept: Acknowledging the risk and choosing not to take additional action.
• Transfer: Shifting the risk or financial consequences to another party, such as an insurer.
• Mitigate: Reducing the likelihood or impact through controls, such as patching or access restrictions.
• Avoid: Eliminating the activity that creates the risk.

• Preparing and managing datasets
• Building and training machine-learning models
• Testing and evaluating models
• Deploying models as endpoints for predictions

• Red team: Offensive security; simulates attackers and validates exploitability.
• Blue team: Defensive security; monitors, detects, and responds to attacks.
• Purple team: Helps red and blue teams collaborate and improve defenses; not usually the primary testing role.
• White team: Oversees and coordinates the rules, scope, and authorization of an exercise.

• MFA adds an additional authentication factor, such as a phone notification or verification code.
• It helps prevent unauthorized sign-ins, even if a password is compromised.
• It does not encrypt, store, or protect credentials used by deployment processes.

• B: Prompt caching reduces cost and latency for repeated content, but cached content still occupies the context window. It does not solve context accumulation.
• C: Switching to a smaller model changes model capacity but does not address the growing context or remove irrelevant data.
• D: Keeping everything indefinitely increases token usage, risks context-window limits, and can distract the model with outdated information.

• transform() — modifies every element in an array
• filter() — keeps elements matching a condition
• exists() — checks whether any element matches
• aggregate() — reduces array elements to one result

sql 
SELECT transform(scores, x -> x * 2) 
FROM student_scores;

• A is incorrect because higher-order functions are mainly useful for nested or complex data.
• B is incorrect because they do not convert logic into Python.
• D is incorrect because their purpose is not to fix slow built-in functions, but to process arrays or maps with custom logic.

• Install unauthorized or unsupported software
• Access features blocked by the manufacturer or operating system
• Customize system behavior beyond normal settings

1. Discovery tries the SSH probe first.
2. SSH fails.
3. Discovery tries SNMP, which succeeds.
4. Discovery records SNMP as the preferred service for that IP.
5. Future discoveries try SNMP first.

• Classification identifies the type of device, such as a server, router, or printer.
• Credential affinity remembers which credentials work for a device.
• MID Server affinity associates a device or network with a particular MID Server.
• IP service affinity specifically controls the preferred discovery protocol or service.

• Base table — the table containing common inherited fields
• Parent table — the table directly extended by the child
• Other tables in the hierarchy

• File1 contains the evaluation configuration—for example, evaluators, test data, thresholds, or evaluation parameters.
• The GitHub Actions workflow must reference that file through the evaluation-config input so the action knows which evaluation to run.
• project-endpoint identifies the Microsoft Foundry project, but it does not identify the evaluation definition. It is also typically required, but it does not answer the specific requirement about using File1.

• Maximum response and resolution times
• Expected uptime or availability
• Performance requirements
• Escalation procedures
• Consequences for failing to meet requirements

• SOW: Defines a project’s scope, tasks, deliverables, and schedule.
• MOA: Documents specific responsibilities agreed upon by two parties.
• MOU: Records a general understanding or intent to cooperate.

• Accept: Acknowledges the risk without taking additional action.
• Transfer: Shifts the risk or financial impact to another party, such as an insurer.
• Mitigate: Reduces the likelihood or impact through controls like patching, MFA, or segmentation.
• Avoid: Eliminates the activity that creates the risk.

• A Screen Flow can present a form that inspectors complete and submit on an Experience Cloud page.
• It can collect inspection findings, validate the input, and create or update records.
• An Autolaunched Flow has no user interface, so it cannot directly provide the form.
• A Related List only displays related records, and Record Detail is primarily for viewing or editing an existing record—not for a custom inspection submission form.

• Deterrent control: The signs warning that people may be filmed can discourage unauthorized or malicious activity. They do not directly stop the action; they influence behavior.
• Detective control: CCTV records or monitors activity so security personnel can identify events or investigate them afterward.

• Preventive: Stops an incident from occurring, such as access control.
• Corrective: Restores systems after an incident.
• Directive: Instructs people to behave in a certain way, such as a security policy.
• Compensating: An alternative control used when the preferred control is not feasible.

• Identifies which user or department owns the device
• Supports inventory and compliance requirements
• Enables tracking of lost, stolen, retired, or unauthorized devices
• Helps enforce security controls such as mobile-device management and secure configuration

• Red team: Offensive security; attempts exploitation and simulates attackers.
• Blue team: Defensive security; monitors, detects, and responds to attacks.
• Purple team: Combines red- and blue-team activities to improve defenses, but is not the best direct answer here.
• White team: Usually oversees or coordinates an exercise, including rules of engagement and scope.

• A: CEO-sponsored formal policy — demonstrates executive support, but sponsorship at one point in time may not sustain commitment.
• B: Security awareness training — primarily improves employee behavior, not senior management commitment.
• C: Periodic alignment reviews — ongoing reviews show that security remains relevant, supports business priorities, and uses resources appropriately.
• D: Senior management signoff on the strategy — useful for governance and accountability, but signoff is generally a one-time event.

• 24 cores: Available in the Business Critical provisioned-compute configurations.
• Approximately 124 GB memory: Matches the memory capacity of the relevant Business Critical hardware configuration.
• More than 50,000 IOPS: Business Critical uses local SSD storage and provides the high I/O performance required here.
• 500 GB storage: Well within the tier’s supported capacity.

• Premium: The DTU-based Premium tier does not provide the required combination of compute, memory, and I/O characteristics.
• Hyperscale: Hyperscale is primarily intended for very large databases and independent storage scaling. It is not the best match for these specific high-memory and high-IOPS requirements.

• A single summarized value, such as total annual sales
• Progress toward a defined target or goal
• Whether performance is below, near, or above the target

• Table: Displays detailed records or summarized rows, but not goal progress visually.
• Stacked Bar: Compares multiple categories and their parts.
• Donut: Shows how a total is divided among categories, not progress toward a target.

Manager role

DAX 
Country[Manager] = USERPRINCIPALNAME()

• Sales
• Human Resources

CFO role

• See sales for all countries
• See no Human Resources data

• Do not restrict the Country table or Sales table.
• Apply a filter to Human Resources that always returns false, such as:

DAX 
FALSE()

• Honeypots: Decoy systems designed to attract attackers. Legitimate users should not access them, so activity there is a strong indication of unauthorized access.
• DNS sinkholes: Redirect requests for known malicious domains to a controlled internal destination instead of the real attacker infrastructure. Security teams can then identify infected systems making those requests.

• Tokenization: Replaces sensitive data with non-sensitive tokens; it protects data but does not detect intruders.
• CI/CD: Software development and deployment processes.
• Threat modeling: Identifies potential threats before or during system design, rather than detecting successful infiltration.
• Data obfuscation: Makes information harder to understand, but is not an attacker-detection mechanism.

• Regression predicts continuous numeric outcomes, such as house price, temperature, or sales amount.
• Linear regression assumes the target can be estimated from a linear relationship between the input features and the target.
• In Azure Machine Learning, you use a labeled dataset containing:

• Classification predicts a category or class, such as “spam” or “not spam.”
• Clustering groups similar records without a known label; it is an unsupervised learning technique.

• On VirtualNetworkA: enable Allow gateway transit.
• On VirtualNetworkB: enable Use remote gateways.

• Security
• Availability
• Processing integrity
• Confidentiality
• Privacy

• Whether controls are suitably designed, and
• Whether they operated effectively over a period of time

• A is valid:

apex 
  for (Account theAccount : AccountList) { 
      // process theAccount 
  }

• D is conceptually valid, using an index:

apex 
  for (Integer i = 0; i < AccountList.size(); i++) { 
      Account theAccount = AccountList[i]; 
  }

• B is invalid because for(AccountList) is not valid loop syntax.
• C is invalid because each item is an Account, not a List.

• A business-hours greeting
• An after-hours greeting
• A holiday greeting

• Weekday evenings/nights
• Saturdays and Sundays

1. Auto attendant 1

1. Auto attendant 2

• Un AG puede tener réplicas en Windows y Linux desde SQL Server 2017; por tanto, una réplica Windows y otra Linux es posible.
• Sin embargo, las réplicas de un AG deben utilizar normalmente la misma versión principal de SQL Server. Una instancia SQL Server 2017 no puede tener directamente una réplica secundaria SQL Server 2019 como configuración normal y permanente.
• En tu escenario, SQL Server 2017 en Windows y SQL Server 2019 en Linux no se pueden añadir directamente como réplicas equivalentes de AG1. Primero habría que realizar un proceso de actualización/migración compatible, por ejemplo mediante una actualización gradual o una tecnología de migración como log shipping o distributed availability groups, según el diseño.

• Tipo de clúster y mecanismo de quorum.
• Failover normalmente manual en configuraciones multiplataforma.
• Edición y características compatibles.
• Configuración de endpoints y permisos.
• Limitaciones específicas de SQL Server en Linux.

• Identity: User-assigned managed identity

• Authorization: Azure RBAC

• Response and resolution time frames
• Availability or uptime requirements
• Performance targets
• Support obligations
• Penalties for failing to meet requirements

• SOW (Statement of Work): Defines the project’s scope, tasks, and deliverables.
• MOA (Memorandum of Agreement): Describes cooperation and responsibilities between parties.
• MOU (Memorandum of Understanding): Records a general mutual understanding, usually without detailed enforceable service targets.

• Security groups
• Dynamic security groups
• Cloud-only or synchronized security groups

• Microsoft 365 groups
• Distribution groups
• Mail-enabled distribution groups

• Report on the discount approval time for quotes

• Dashboard of opportunity stage duration

• Lead conversion trends measure lead-generation effectiveness, not opportunity closing time.
• Campaign ROI evaluates marketing performance, not delays in the sales process.

• Behavioral and anomaly detection
• Threat intelligence integration
• User and entity behavior analytics
• Automated response actions, often through SOAR integration

• Virus signatures: Associated primarily with antivirus or endpoint protection.
• Security agent deployment: Usually an endpoint-management or EDR function.
• Vulnerability scanning: Typically performed by vulnerability-management tools, though a SIEM may integrate their results.

• Suspended an operator who correctly refused to use unsafe equipment.
• Rewarded another operator for using the equipment despite the broken safety guard.

• A — Management is not particularly concerned with managing risks.

• B — Employees will perceive that management does not care about health and safety risks.

• C — This factory’s safety record is likely to be poor.

• A. IDS attack signatures: An IDS primarily detects suspicious network activity; it is not the best control for scanning uploaded documents for malware.
• C. Load balancer: Distributes traffic among servers and improves availability, but does not inspect files for malware.
• D. WAF: Protects web applications against attacks such as SQL injection and command injection. It may help secure the upload function, but malware scanning is the key requirement here.

• Virtual introductions: Team members share their role, experience, location, and working preferences.
• Online icebreakers: Short, informal activities such as “two truths and a lie.”
• Virtual coffee chats: Pair team members for informal, non-project conversations.
• Collaborative problem-solving: The team works together on an online puzzle or scenario.
• Retrospectives: The team discusses what went well, what did not, and how to improve.
• Working-agreement sessions: The team agrees on response times, meeting etiquette, communication channels, and handoffs.
• Recognition sessions: Members acknowledge one another’s contributions.
• Remote workshops: Teams jointly create plans, diagrams, or schedules using collaboration tools.

• Group1 — security-enabled: Eligible.
• Group2 — mail-enabled and security-enabled: Eligible because it is still a security group.
• Group3 — Microsoft 365 group: Not eligible for group-based licensing.
• Group4 — Microsoft 365 group, not security-enabled: Not eligible.

• Box 1: No — The rule requires user.department to equal Engineering. Engineer does not match, so User1 is not in AU1. Admin1 cannot reset User1’s password.
• Box 2: No — Admin1’s role is scoped to AU1 and cannot manage users outside that AU.
• Box 3: Yes — Admin2 is a Global Administrator and can reset User3’s password.

• Malware or malicious software
• Command-and-control tools
• Internet surveillance and intrusion software

• ITAR: A U.S. regulation controlling defense-related articles and services; it is not the international arrangement described.
• Palermo Convention: Focuses on transnational organized crime and related protocols, not export controls for cyber weapons.
• GDPR: European data-protection and privacy legislation.

• Minimum
• Maximum
• Average
• Count
• Null/empty values
• Distinct values

• Enable column profile
• Enable details pane
• Show column profile in details pane