VEEAM VMCE2021 Exam Prep
Veeam Certified Engineer 2021 (Page 6 )

• Three DHCP scopes: Each VLAN has its own IPv4 subnet. DHCP scopes are subnet-specific, so create one scope for:

• Two DHCP relays: DHCP client discovery begins as a broadcast, and broadcasts do not cross routers or VLAN boundaries. Therefore, configure a DHCP relay on the router or Layer 3 switch interface for each client VLAN.

• Data Category Groups e categorias;
• Visibilidade dessas categorias para perfis ou permission sets.

• B e C: regras de compartilhamento não são o mecanismo apropriado para restringir resultados de busca do Knowledge por divisão.
• D: a role hierarchy não é o mecanismo principal para controlar a visibilidade de categorias do Knowledge. Além disso, a configuração correta é atribuir visibilidade a perfis ou permission sets.

• Custom domains: Supported by Basic and higher tiers.
• Dedicated compute: Basic and Standard use dedicated virtual machine instances; Free and Shared use shared infrastructure.
• Load balancing between instances: Standard provides scaling across multiple instances with load balancing.
• Storage: Standard provides more storage than Basic.
• Cost: Standard is the least expensive option that satisfies all the stated requirements.

• Free/Shared: Use shared compute and have limited features; they don’t meet the dedicated-compute requirement.
• Basic: Provides dedicated compute and custom domains, but does not provide the required Standard-level multi-instance capabilities in the exam’s feature comparison.

• STP elects the switch with the lowest Bridge ID as the root bridge.
• The Bridge ID consists mainly of bridge priority + MAC address.
• If multiple switches have the same priority, the switch with the lower MAC address is preferred.
• STP bridge priority values are configured in increments of 4096, such as 0, 4096, 8192, and so on. 32768 is the standard default value.

• A is incorrect: Flow Debugger is for debugging Salesforce Flows, not Trust Layer masking.
• B is incomplete/misleading: Requesting audit data may be part of reviewing the results, but collection and storage must first be enabled.
• C is correct: It describes the initial validation step.

• Required response time
• Resolution time
• Availability or uptime
• Support hours
• Performance targets
• Consequences if targets are missed

• SOW (Statement of Work): Defines the project’s scope, tasks, deliverables, and schedule.
• MOA (Memorandum of Agreement): Describes the responsibilities and commitments between parties.
• MOU (Memorandum of Understanding): Documents a general mutual understanding or intent, often before a formal agreement.

Recommended process

1. Access each switch’s terminal.
2. Use help to identify available commands.
3. Use the MAC table command, such as:

text 
   show mac-address-table

1. Use VLAN information, such as:

text 
   show vlan

1. Use interface information, such as:

text 
   show ip interface brief

1. Record each device’s:

• A password cracker would normally be identified by behavior such as loading password hashes or attempting dictionary/brute-force attacks.
• The question describes a routine audit, not password recovery.
• Simply encountering a protected file during an audit is characteristic of a misconfigured or insufficiently privileged FIM.

• B — AWS DataSync: Transfers data between storage systems. It is not a marketplace or integration service for third-party datasets.
• C — Kinesis Data Streams and CodeCommit: CodeCommit stores source code, not third-party analytical datasets. Kinesis is for streaming data, not retrieving datasets from repositories.
• D — Kinesis Data Streams and ECR: Amazon ECR stores container images, not third-party datasets.

• Red team: Offensive security; attempts exploitation and simulates attackers.
• Blue team: Defensive security; monitors, detects, and responds to attacks.
• Purple team: Combines red- and blue-team activities to improve defenses, but is not the best direct answer here.
• White team: Usually oversees or coordinates an exercise, including rules of engagement and scope.

• An Adj-SID does not necessarily need manual configuration.
• It can often be dynamically allocated by the router, although manual configuration may also be possible.
• The adjacency information is advertised through the IGP, such as IS-IS or OSPF.

• It is identified by an Adj-SID.
• It represents a particular adjacency of a node.
• Its meaning is generally local to the advertising node; unlike a Node-SID, it is not a globally reusable instruction across the network.

• Group1 — security-enabled: Eligible.
• Group2 — mail-enabled and security-enabled: Eligible because it is still a security group.
• Group3 — Microsoft 365 group: Not eligible for group-based licensing.
• Group4 — Microsoft 365 group, not security-enabled: Not eligible.

• User2 is in Group1, so CA2 applies.
• CA2 targets Office 365.
• CA2 requires MFA OR an app protection policy.
• User2 has no app protection policy, but if User2 successfully completes MFA, the OR condition is satisfied.
• The device being noncompliant does not matter because CA2 does not require device compliance.
• CA1 applies only to Global Administrators. Unless User2 is also a Global Administrator, CA1 does not apply.

• B — The most significant risks are held by SQ.

• C — SQ should recognise the cars as inventory.

• F — SQ recognises revenue when LM sells a car to a third party.

• A: LM does not hold the most significant risks.
• D: LM does not recognise the cars as inventory.
• E: SQ should not recognise revenue when cars are merely delivered to LM.

• Creating and training machine-learning models
• Testing and evaluating models
• Deploying models as usable endpoints

• Record changes — a flow can start when a record is updated or otherwise changes.
• Schedules — a flow can run at a specified date/time or on a schedule.
• Record inserts — a flow can start when a new record is created.

• Subflows are reusable flow components called by another flow; they are not normally trigger types.
• Record views do not generally initiate a Flow Designer flow.

• Create the field in the CRM on the relevant person records—typically Lead and Contact in Salesforce.
• Give the Marketo Sync User read/write access to the field.

• CBWFQ (Class-Based Weighted Fair Queuing): Creates traffic classes and assigns each class a guaranteed bandwidth or queueing treatment.
• PQ (Priority Queuing): Uses multiple queues with strict priority. Higher-priority queues are serviced before lower-priority queues, making it useful for delay-sensitive traffic—but it can starve lower-priority traffic.

• FRTS: Traffic shaping for Frame Relay; it controls the transmission rate rather than selecting packets during congestion.
• CAR: Polices traffic by rate, typically dropping or remarking packets that exceed a limit.
• PBR: Policy-Based Routing; it selects forwarding paths and is not a QoS queueing mechanism.

• Training data for potential bias before model training
• Trained models for bias in predictions
• Model features to help explain how they influence predictions

• A: RAG workflows are typically built using services such as Amazon Bedrock, knowledge bases, and data sources.
• B: Monitoring model quality in production is primarily associated with SageMaker Model Monitor.
• C: Documenting model details is handled by capabilities such as SageMaker Model Cards.

• up ? down ? up
• Often happens rapidly or intermittently

• Faulty or loose cable or connector
• Failing transceiver, NIC, or switch port
• Speed/duplex or auto-negotiation problems
• Power or hardware instability
• Layer 1 interference

• Nothing plugged in: the port is simply down
• Latency: does not directly trigger err-disable
• shutdown: administratively disables the port, but that is not the same as an automatically detected err-disabled condition

• The connected switch
• The switch’s port/interface
• Device and port descriptions
• Sometimes VLAN or management information

• IKE: Establishes security associations for IPsec VPNs.
• VLAN: Defines logical network segmentation; it does not identify a physical switch port.
• netstat: Displays local network connections and statistics, not the upstream switch and port.

• Scale out during the hours when customer traffic is high.
• Scale in during low-demand periods, reducing instance-hours and cost.
• Use scaling policies based on metrics such as CPU utilization or request count.

• Multiple Availability Zones: Improves availability and fault tolerance, but does not automatically reduce cost.
• Placement group: Helps with specialized performance or low-latency requirements, not cost optimization.
• Private subnets: Improve network security, but do not automatically adjust capacity or reduce EC2 usage costs.

• Matching hashes: The software likely has not changed.
• Different hashes: The software was modified or corrupted.

• Encryption: Protects confidentiality by making data unreadable; it does not primarily detect changes.
• Baselines: Define an approved system or configuration state, but they are not the specific integrity mechanism here.
• Tokenization: Replaces sensitive data with substitute values.

• Rights issue: Raises new equity from existing shareholders. It does not increase debt or gearing, so it is least likely to breach the covenant.
• Retained earnings: Also equity finance, but the amount available may be insufficient for the required $800 million.
• Private placement of a bond: Creates additional debt and would worsen gearing, increasing the risk of breaching the covenant.
• Bank overdraft: Also debt finance, usually short-term and potentially expensive; it would still increase financial risk and gearing.

• B — Incorporate contextual output encoding/escaping: Encode untrusted data based on its context—HTML, attribute, JavaScript, or URL—so the browser treats it as data rather than executable code.
• D — Run untrusted HTML input through an HTML sanitization engine: Sanitization removes or neutralizes dangerous elements and attributes, such as script-related content, while preserving safe HTML where needed.

• A: Enabling client-side scripts does not prevent XSS. Script restrictions may reduce risk in some environments, but “enable” is not a general XSS control.
• C: Cookie inspection is unrelated to preventing injected scripts.
• E: The SameSite cookie attribute primarily helps mitigate CSRF, not XSS. It should not generally be described as an XSS prevention measure.

• True positive: The scan reports a vulnerability that really exists.
• False positive: The scan reports a vulnerability that does not exist.
• True negative: The scan correctly reports no vulnerability.
• False negative: The scan fails to detect a vulnerability that is actually present.

• A: It allows for branching and merging...

• C: It allows multiple engineers to work against the same code and configuration files and manage differences and conflicts.

• B: Build automation and infrastructure provisioning are handled by CI/CD and automation tools, not by version control alone.
• D: User Stories and backlogs are managed by project-management tools.
• E: Version control stores and tracks code, but it does not itself ensure that developers write effective unit tests.

• The Intune device limit restriction does not apply in the normal way; DEM enrollment supports up to 1,000 devices.
• However, the Microsoft Entra maximum number of devices per user setting can still impose a limit when the enrollment creates an Entra device object.
• Therefore, a DEM account is not automatically unlimited. The effective limit depends on the Entra device setting and the enrollment/join type.

• The CSV contains the external users’ email addresses.
• The bulk invitation feature supports inviting many guest users in one operation.
• Each invited user becomes a guest account in contoso.com.

• Act as the default gateway for devices in that VLAN
• Route traffic between different VLANs
• Provide management access to the switch

text 
interface vlan 10 
 ip address 192.168.10.1 255.255.255.0

• Due diligence: Researching and evaluating a third party before entering or continuing a business relationship.
• Internal audit: Evaluates controls within the organization itself.
• Penetration testing: Actively tests systems for exploitable vulnerabilities.
• Attestation: A formal statement or report—such as a SOC 2 report—provided by an independent party about an organization’s controls.

• The table is large.
• Queries frequently filter or join on particular columns.
• The table’s natural data order does not support good micro-partition pruning.
• Clustering improves performance enough to justify its maintenance cost.

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect some attack traffic, but it is not the primary control for switch-port MAC learning.
• NGFW: Protects at network boundaries but does not directly limit MAC addresses learned on access ports.

• host — simple, human-friendly lookups

bash 
  host example.com 
  host 192.0.2.1

• dig — detailed DNS troubleshooting

bash 
  dig example.com 
  dig example.com MX 
  dig @8.8.8.8 example.com

• nslookup — older, familiar, and widely available

bash 
  nslookup example.com

• Quick answer: host
• Detailed diagnosis: dig
• Compatibility or legacy environments: nslookup