Veritas VCS-316 Exam Prep
Administration of Veritas Backup Exec 2012 (Page 7 )

1. Append Table1 and Table2 as a new query

1. Select the product column in the appended query.

1. Choose Remove Rows > Remove Duplicates

• User-generated content: precisa ser coletado, filtrado, anonimizado e rotulado.
• Moderation logs: podem conter dados inconsistentes, informações pessoais e decisões que precisam ser revisadas.
• Content moderation guidelines: são regras ou orientações, não dados diretamente utilizáveis para medir o comportamento do modelo.

• A. Adjust resolution: Incorrect because an incompatible resolution usually causes no display, distortion, or an unsupported-mode message—not intermittent flickering.
• B. Swap the HDMI cable: Correct. Replacing the common, easily tested component is the appropriate troubleshooting step.
• C. Replace the projector: Incorrect because the issue also occurs with a monitor.
• D. Configure refresh rate: A mismatched refresh rate can cause visual problems, but the repeated flicker across displays points more strongly to the cable.

• A business-hours greeting
• An after-hours greeting
• A holiday greeting

• Weekday evenings/nights
• Saturdays and Sundays

1. Auto attendant 1

1. Auto attendant 2

• Due diligence: Investigating and evaluating a third party before entering a business relationship.
• Attestation: An independent auditor’s examination and formal report—such as the SOC 2 report itself. The analyst is reviewing the attestation, not performing it.
• Internal audit: Examines the organization’s own processes and controls.
• Penetration testing: Actively tests systems for exploitable vulnerabilities.

• A class/teacher fact should contain one row per Class ID. It can support the count of classes and contain attributes such as Teacher First Name and Period Number.
• An attendance fact should contain one row per attendance event, such as Class ID + student + date. It supports attendance counts by day and monthly averages.

• Teacher First Name ? Teacher fact
• Period Number ? Attendance fact

• Three DHCP scopes: Each VLAN has its own IPv4 subnet. DHCP scopes are subnet-specific, so create one scope for:

• Two DHCP relays: DHCP client discovery begins as a broadcast, and broadcasts do not cross routers or VLAN boundaries. Therefore, configure a DHCP relay on the router or Layer 3 switch interface for each client VLAN.

• MFA: Protects sign-in and authentication.
• Azure Key Vault: Protects deployment secrets and credentials.
• Answer: No (B).

• A. IDS attack signatures: An IDS primarily detects suspicious network activity; it is not the best control for scanning uploaded documents for malware.
• C. Load balancer: Distributes traffic among servers and improves availability, but does not inspect files for malware.
• D. WAF: Protects web applications against attacks such as SQL injection and command injection. It may help secure the upload function, but malware scanning is the key requirement here.

• Espionage: Stealing confidential information, often for a competitor or foreign entity.
• Data exfiltration: Unauthorized removal or transfer of data.
• Nation-state attack: A cyberattack sponsored or conducted by a government.
• Shadow IT: Unapproved technology or services used outside IT oversight.

• Azure DevOps Analytics views are accessed through the Power BI Azure DevOps (Boards only) connector.
• This connector authenticates directly to Azure DevOps Services and lets you select an Analytics view.
• Analytics views allow filtering and shaping data in the cloud before Power BI loads it.
• Azure DevOps Server (Boards only) is for an on-premises Azure DevOps Server instance, not Azure DevOps cloud.
• A generic OData Feed connection can access OData endpoints, but it is not the purpose-built connector for Azure DevOps Analytics views.
• “OData queries” describes the underlying technology or query approach, not the most appropriate Azure DevOps connector choice here.

• Initial Intrusion: The compromised VPN account and stolen phishing credentials describe how the attacker first gained access, but that happened months earlier.
• Persistence: The scheduled tasks and recurring C2 connections show how the attacker maintained and automated continued access.
• Search and Exfiltration: This would involve locating and transferring data. The scenario does not primarily describe data discovery or theft.
• Cleanup: Cleanup involves removing evidence or covering tracks. Obfuscated scripts may make detection harder, but the main behavior here is maintaining access.

• Group1 — security-enabled: Eligible.
• Group2 — mail-enabled and security-enabled: Eligible because it is still a security group.
• Group3 — Microsoft 365 group: Not eligible for group-based licensing.
• Group4 — Microsoft 365 group, not security-enabled: Not eligible.

1. Wireless AP

1. Router

1. Firewall

1. Device placement

• Prevention costs – costs incurred to stop defects occurring, such as staff training, quality planning and supplier evaluation.
• Appraisal costs – costs of checking whether products meet standards, such as inspection, testing and quality audits.
• Internal failure costs – costs of defects found before delivery to customers, such as scrap, rework and retesting.
• External failure costs – costs of defects found after delivery, such as warranty claims, returns, complaints and product recalls.

• Atomicity: a write fully succeeds or does not appear.
• Consistency: table state remains valid.
• Isolation: concurrent operations do not corrupt one another.
• Durability: committed changes persist.

• Flexible schemas: common data lakes often support flexible or schema-on-read data.
• Open-source formats: common data lakes commonly use open formats such as Parquet.
• Scalable storage: cloud data lakes already provide scalable storage.

• B — AWS DataSync: Transfers data between storage systems. It is not a marketplace or integration service for third-party datasets.
• C — Kinesis Data Streams and CodeCommit: CodeCommit stores source code, not third-party analytical datasets. Kinesis is for streaming data, not retrieving datasets from repositories.
• D — Kinesis Data Streams and ECR: Amazon ECR stores container images, not third-party datasets.

• Domínios personalizados.
• Armazenamento suficiente.
• Instâncias dedicadas.
• Balanceamento de carga.
• Menor custo entre os planos que atendem a tudo.

• Filtering harmful or inappropriate content
• Blocking specified topics
• Detecting and masking sensitive information
• Enforcing content policies suitable for children

• Amazon Rekognition analyzes images and videos; it does not control text generated by a language model.
• Amazon Bedrock playgrounds are for testing models and prompts, not enforcing production safety policies.
• Agents for Amazon Bedrock help models complete tasks and use tools; they do not primarily provide content-safety controls.

• Data only needs to be current at 7 AM each day, so scheduled refresh is sufficient.
• Import mode provides the fastest report interaction because data is stored in Power BI’s in-memory engine.
• It supports row-level security (RLS), including the USERNAME() filter.
• You can limit the imported data to the current year and previous three years to reduce model size.
• DirectQuery would generally provide slower visual response times and is unnecessary here.
• Dual is mainly useful in composite models where some tables use DirectQuery and others use Import. That is not required by this scenario.
• Live connection is not appropriate because you are creating the semantic model.

1. The original app version exists.
2. You create and publish a new version, so there are now two versions.
3. When you restore the previous version, Power Apps does not delete or overwrite the newer version. Instead, it creates another version based on the restored one.

• Original version
• Newly created and published version
• New version created by the restore operation

• A — Tables
• B — Named file formats
• C — Schemas
• E — Databases

Why these are correct

• Tables: Can be cloned using CREATE TABLE ... CLONE. The clone initially uses zero-copy cloning, so storage is shared until changes are made.
• Named file formats: Can be cloned as database objects, preserving the file-format definition.
• Schemas: A schema and its eligible objects can be cloned.
• Databases: A database and its eligible schemas and objects can be cloned.

Why the others are incorrect

• Shares: A share is an account-level data-sharing object, not a normal cloneable database object.
• Users: Users are security principals and cannot be cloned with CLONE.

• netstat -tuln can show listening TCP ports.
• If the web service is not listening, or is bound only to 127.0.0.1, remote browsers cannot connect even though the server responds to ping.

• traceroute: Tests the path to the server, but ping already confirms basic reachability.
• tcpdump: Useful for detailed packet analysis, but it is more appropriate after checking whether a service is listening.
• arp: Helps troubleshoot local IP-to-MAC resolution, not an application-layer web connection.

apex 
Set<Id> accountIds = new Set<Id>{ accountId1, accountId2 }; 


List<Account> accounts = [ 
    SELECT Id, Name 
    FROM Account 
    WHERE Id IN :accountIds 
];

• A: LIMIT accepts a number, not a collection of IDs.
• B: Set.containsAll() checks set contents in Apex; it does not filter SOQL results.
• C: Database.query() accepts a dynamic SOQL string, not a Set<Id> directly.

• Who owns security risks and decisions
• Who is responsible for implementing controls
• Who reports security performance to management
• How security responsibilities align with business objectives

• B — Compliance with audit requirements: Governance may support compliance, but audit compliance is not its main objective.
• C — Monitoring security incidents: This is an operational security activity, not the central purpose of governance.
• D — Creation of tactical solutions: Governance establishes direction and oversight; tactical solutions belong to management and operational teams.

• Which batches and markets are affected
• Whether the deficiency affects product quality, efficacy, or patient safety
• Whether the issue is an ongoing manufacturing problem
• Whether immediate containment or distribution suspension is needed

• A — Withdraw the product: may be necessary, but is premature before assessing the risk.
• B — “Dear Dr.” letter: may be appropriate later, depending on the risk.
• C — Notify global authorities: may become mandatory, but the scope and urgency depend on the assessment.

• Access List: controls whether a client is allowed or denied.
• Connect List: controls which wireless networks/APs a station may connect to.

• Accept: Acknowledging the risk without taking additional action.
• Transfer: Moving the risk’s financial impact to a third party, such as an insurer.
• Mitigate: Reducing the likelihood or impact through controls, such as patching or employee training.
• Avoid: Eliminating the activity that creates the risk.

• Allow only approved MAC addresses
• Limit the number of learned addresses
• Shut down or restrict a port when a violation occurs

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect some attack traffic, but it is not the direct control for limiting MAC addresses on switch ports.
• NGFW: Filters routed network traffic, while this attack targets Layer 2 switch behavior.

• Deficiency found before patient use: usually does not require an adverse-event report because no patient exposure occurred.
• Event caused solely by the patient’s condition: may not be reportable if the device did not contribute.
• Malfunction protection operated correctly: generally exempt when the device’s safety mechanism worked as intended and prevented harm.

• A: Concerns task scheduling and avoiding missed runs, not directly sizing the warehouse.
• B: The amount of data in a stream alone does not reliably determine compute needs; the SQL processing is what matters.
• D: A multi-cluster warehouse addresses concurrency, not the compute size needed for one task execution.

apex 
for (Account updatedAccount : Trigger.new) { 
    AccountTriggerHelper.notinyxternalSystem(updatedAccount.Id); 
}

• Too many callouts: The callout occurs asynchronously in the future method, and each future transaction can perform its permitted callouts.
• Too many SOQL queries: The SOQL query is inside the future execution, not repeatedly in the trigger transaction.
• Callout from triggers not supported: Direct callouts from triggers are prohibited, but the trigger delegates the callout to asynchronous Apex, which is the correct pattern.

• C: Develop the rule in the Rules Editor, define the events, match, and condition sections, then use the test rule feature. This directly validates the YARA-L rule without enabling it in production.
• A: UDM Search can help investigate data and refine filters, but it does not fully test YARA-L logic—especially complex event joins, match windows, and conditions.

• Prevention costs: Avoiding defects, such as staff training and improved product design. The company has invested in these.
• Appraisal costs: Detecting defects before products reach customers, such as inspection and testing. The planned batch sampling has not been implemented.
• Internal failure costs: Correcting defects found before delivery.
• External failure costs: Dealing with defects after delivery, such as refunds, replacements, complaints and lost sales.

• Orders contains order-level information, such as the order date.
• Order Line Items contains the products, quantities, and line amounts associated with each order.
• Merging them on the order key, such as OrderID, places the order date alongside each line item. This allows you to calculate total order value and analyze it over time.
• Product attributes can remain in the Products table and be related to the resulting line-item table through ProductID.

• Merging line items with products addresses product attributes but does not first provide the order-level date and value needed for time analysis.
• DAX calculated columns or lists add unnecessary model complexity.
• Calculating order counts is not the first requirement and does not combine the required order and line-item data.

• A: It allows for branching and merging...

• C: It allows multiple engineers to work against the same code and configuration files and manage differences and conflicts.

• B: Build automation and infrastructure provisioning are handled by CI/CD and automation tools, not by version control alone.
• D: User Stories and backlogs are managed by project-management tools.
• E: Version control stores and tracks code, but it does not itself ensure that developers write effective unit tests.

• Security controls
• Processes and procedures
• Compliance evidence
• Performance against contractual requirements

• Service-level agreement (SLA): Defines expected service performance, such as uptime and response times.
• Memorandum of agreement (MOA): Documents a general agreement between parties, but does not necessarily provide audit rights.
• Supply chain analysis: Identifies risks across suppliers and dependencies, but is not a contractual mechanism for reviewing vendor controls.

• A is incorrect: Flow Debugger is for debugging Salesforce Flows, not Trust Layer masking.
• B is incomplete/misleading: Requesting audit data may be part of reviewing the results, but collection and storage must first be enabled.
• C is correct: It describes the initial validation step.

• Scanning is not essential during a power outage.
• A scanner can consume UPS battery power without helping the user save cloud documents or shut down safely.
• The UPS should be reserved for the computer, monitor, and necessary network equipment.
• The surge protector helps protect the scanner from voltage spikes, but it will not keep it running during an outage.

• BCP (Business Continuity Plan): è più ampio e mira a mantenere le funzioni essenziali dell’organizzazione durante un’interruzione. Il DRP è una componente più specifica del BCP.
• Communication plan: stabilisce come comunicare con dipendenti, cittadini e altre parti interessate, ma non ripristina i sistemi.
• IRP (Incident Response Plan): gestisce la risposta iniziale a un incidente di sicurezza, come un attacco informatico, non principalmente il recupero da un disastro fisico.

• Internal hostnames and subdomains
• Network structure and naming conventions
• Servers and services
• Relationships between systems

• Determining ISP-assigned address space: Usually involves external registration and DNS information, not internal host discovery.
• Bypassing DNS sinkholing: Would require evidence that malicious DNS requests avoided redirection.
• Initial access: DNS queries alone do not show that the attacker gained access.
• Exfiltrating data: DNS tunneling can do this, but the snippet would typically show encoded or unusually long DNS queries.

• Outer packet: 10.5.1.1 > 52.165.16.154
• IPv4 protocol field: 41, which indicates IPv6 encapsulation
• Inner packet: IPv6 traffic between 2001:... addresses

• MAC address spoofing: Changes Layer 2 addressing; it does not explain the IPv6-in-IPv4 structure.
• Steganography: Hides data inside files or media, not visibly in a tunneled protocol.
• Broken encryption: No evidence of encryption being cracked.
• On-path sniffing: Involves intercepting traffic, not sending data to an external host.

• terraform apply
• terraform destroy

• 25 — Traditional SMTP server-to-server mail delivery; often restricted and not the usual client submission port.
• 110 — POP3, used for retrieving email; normally unencrypted.
• 143 — IMAP, used for retrieving and synchronizing email; normally unencrypted.

• Liability accounts (2000–2999) would incorrectly require dimensions, although they should have none.
• Expense accounts (6000–6998) would incorrectly require Customer, which should be optional.
• Account 6999 needs a separate rule because it requires all four dimensions, including Customer.

• 2000–2999: no dimensions
• 4000–4999: Department and Division required; Project and Customer optional
• 6000–6998: Department, Division, and Project required; Customer optional
• 6999: Department, Division, Project, and Customer required

• Share files with the wrong people
• Use public links unnecessarily
• Fail to classify sensitive data
• Upload data to unauthorized services
• Misunderstand company sharing policies

• A — Step-up authentication: Helps protect administrator accounts, but does not directly address improper file sharing by users.
• C — Password complexity: Helps reduce password attacks, not accidental data disclosure.
• D — Mobile device management: Secures managed mobile devices, but does not directly control file-sharing behavior across the organization.

• Information sources: Collect security-related data, such as network packets, system logs, audit records, or application events.
• Analysis: Examines the collected data to identify suspicious activity, attacks, or policy violations.
• Response: Takes or recommends action, such as generating alerts, logging the event, or supporting a protective response.

• Plenum: Describes a fire-resistant cable jacket rating, not a transmission medium or speed.
• Ethernet: Describes a networking technology; Ethernet can use copper or fiber, so the term alone does not identify the fastest cable type.
• DAC (Direct Attach Copper): Uses copper and is typically intended for short-distance, high-speed connections in data centers.

• Help the team identify the root causes of delays.
• Empower the team to improve its workflow and practices.
• Facilitate removal of impediments.
• Avoid directing the team toward a solution without its involvement.
• Protect quality and sustainable delivery rather than simply accelerating everything.

• A: An impediment log may help, but merely recording problems does not empower the team to solve them.
• B: Directing the team to solutions conflicts with self-management.
• C: Adding impediments to the product backlog may incorrectly treat internal obstacles as product features and delays their resolution.

• Suspended an operator who correctly refused to use unsafe equipment.
• Rewarded another operator for using the equipment despite the broken safety guard.

• A — Management is not particularly concerned with managing risks.

• B — Employees will perceive that management does not care about health and safety risks.

• C — This factory’s safety record is likely to be poor.