CompTIA
Checkpoint
ISC
HP
Dell
EC-Council
EXIN
Fortinet
ITIL®
Juniper
PMI
Microsoft
VMware
Avaya
Google
Salesforce
Amazon
Palo Alto Networks
Certiport
ISC2
All Vendors
  2. Home
  3. Exams
  4. VMware
  5. 3V0-22.21

Free 3V0-22.21 Exam Braindumps (page: 1)

Page 1 of 5
PDF with 17 Questions

You are tasked to automate the installation and deployment of new host added into your company vSphere cluster using Auto Deploy. Ensure Auto Deploy and Image Builder is set to start automatically every time vCenter Server is restarted. Use the web client and VCSA0la to perform this step.

Confirm that the auto deploy plugin is available in the web interface. You may be required to logout and log back in after enabling the services.

The vCenter server is required to retrieve software from an online depot. You are to use the depot provided below and ensure that Auto Deploy is always running even, with restart of vCenter server.

Name FirstDepot
URL https / / hostupdate.vmware.com/software/VUB/PRODUCTION/main/vmw-depot-index.xmlNote: ignore error that you received on cannot connect to depot. This is expected due to vCSA do nothave internet connection. Create a deploy Rule on VCSA0la based on information below. You do not need to apply to any host at this time.

Name: Rule1
Specify Rule to match Vendor: Dell
Check 'Do Not Include Image Profile"
Check 'Do Not Include Host Profile"
Select host location: Choose cluster PROD-A

  1. See Explanation section for answer.

Answer(s): A

Explanation:

Before you can use vSphere ESXi Image Builder with the vSphere Web Client, you must verify that the service is enabled and running.

Procedure
Log in to your vCenter Server system by using the vSphere Web Client.
On the vSphere Web Client Home page, click Administration.
Under System Configuration click Services.
Select ImageBuilder Service, click the Actions menu, and select Edit Startup Type.
On Windows, the vSphere ESXi Image Builder service is disabled. In the Edit Startup Type window, select Manual or Automatic to enable Auto Deploy. On the vCenter Server Appliance, the vSphere ESXi Image Builder service by default is set to Manual.
If you want the service to start automatically upon OS startup, select Automatic.
If you select the manual startup type, you must start the service manually upon OS startup every time you want to use the service.
(Optional) Click the Start the service icon.
(Optional) If you want to use vSphere ESXi Image Builder with thevSphere Web Client, log out of the vSphere Web Client and log in again.
The Auto Deploy icon is visible on the Home page of the vSphere Web Client.



Your security team is getting ready for an audit and wants to check the status of all ESXI hosts' outstanding security patches. Create a new fixed Update Manager baseline for all security ESXi host patches and name it ''Security patches. ''Use the patches available in the patch repository.
Use VCSA01a in this task.
Baseline Name: Security Patches
Baseline Type: Host Patch
Category: Security

  1. See Explanation section for answer.

Answer(s): A

Explanation:

The Update Manager displays system managed baselines that are generated by vSAN. These baselines appear by default when you use vSAN clusters with ESXi hosts of version 6.0 Update 2 and later in your vSphere inventory. If your vSphere environment does not contain any vSAN clusters, no system managed baselines are created.
The system managed baselines automatically update their content periodically, which requires Update Manager to have constant access to the Internet. The vSAN system baselines are typically refreshed every 24 hours. You use system managed baselines to upgrade your vSAN clusters to recommended critical patches, drivers, updates or the latest supported ESXi host version for vSAN.
System managed baselines cannot be edited or deleted. You do not attach system managed baselines to inventory objects in your vSphere environment. You can create a baseline group of multiple system managed baselines, but you cannot add any other type of basline to that group.
Similarly, you cannot add a system managed baseline to a baseline group that contains upgrade, patch, and extension baselines.



As a member of the virtual infrastructure team, you have been tasked with creating a new guest customization specification and deploying a test virtual machine from an existing legacy template migrated from an old VMware VI3 environment to complete this task:

Deploy a new virtual machine with the name VM-GuestCust to esxi02a.vclass.local in cluster PROD-A using the following details: vCenter Server: vcsa01a.vdass.local Datastore: ProdDS01 Template; Core-Template The virtual machine requires an additional network card with the type VMXNET3.

Create a new Guest Customization Spec with the name Custom-Spec using the following details:
© Cust-Spec
Operating System: Windows Server 2008 R2
Registration Spec;
Name: vclass Organization: VMware
The computer name must use the virtual machine name. Timezone must be set to America/Central Time Network Specifications:
IPv4 and IPv6 are set to DHCP but require a static DNS entry of 172.20.10.10 The computer must join the domain vclass.local using the following credentials:
Username: administrator
Password: VMware1!

  1. See Explanation section for answer.

Answer(s): A

Explanation:

Select Menu > Policies and Profiles, and under Policies and Profiles, click VM Customization Specifications. Click the Create a new specification icon.
The New VM Guest Customization Specification wizard opens.
On the Name and target OS page, enter a name and description for the customization specification and select Windows as a target guest OS. (Optional) Select the Generate a new security identity (SID) option and click Next.

A Windows Security ID (SID) is used in some Windows operating systems to uniquely identify systems and users. If you do not select this option, the new virtual machine has the same SID as the virtual machine or template from which it was cloned or deployed.

Duplicate SIDs do not cause problems when the computers are part of a domain and only domain user accounts are used. However, if the computers are part of a Workgroup or local user accounts are used, duplicate SIDs can compromise file access controls. For more information, see the documentation for your Microsoft Windows operating system.
On the Set Registration Information page, enter the virtual machine owner’s name and organization and click Next.
On the Computer name page, enter a computer name for the guest operating system and a domain name.
The operating system uses the computer name to identify itself on the network. On Linux systems, it is called the host name.


On the Windows license page, provide licensing information for the Windows operating system and click Next.


On the Set Administrator Password page, configure the administrator password for the virtual machine and click Next. Enter a password for the administrator account and confirm the password by typing it again.
(Optional) Select the Automatically logon as Administrator check box to log users in to the guest operating system as Administrator, and select the number of times to log in automatically. On the Time zone page, select the time zone for the virtual machine and click Next.
(Optional) On the Run Once page, specify commands to run the first time a user logs in to the guest operating system and click Next. See the Microsoft Sysprep documentation for information about RunOnce commands.
On the Network page, select the type of network settings to apply to the guest operating system and click Next.
Select Use standard network settings so that vCenter Server configures all network interfaces from a DHCP server by using the default settings. Select Manually select custom settings and configure each network interface yourself.
Select a network adapter from the list or add a new one.
For the selected NIC, click the vertical ellipsis icon and select Edit. The Edit Network dialog box opens.
Click the IPv4 tab to configure the virtual machine to use IPv4 network.
You can configure all the settings at that stage or you can select the Prompt the user for an IPv4 address when the specification is used option. In that case, vCenter Server prompts for an IP address when you select to apply that customization specification during cloning or deployment. With that option, you can also configure the gateways during cloning or deployment.
Click the IPv6 tab to configure the virtual machine to use IPv6 network.
You can configure all the settings at that stage or you can select the Prompt the user for an address when the specification is used option. In that case, vCenter Server prompts for an IP address when you select to apply that customization specification during cloning or deployment. With that option, you can also configure the gateways during cloning or deployment.
Click the DNS tab to specify DNS server details.
Click WINS to specify primary and secondary WINS server information. Click OK to close the Edit Network dialog box.
On the Set Workgroup or Domain page, select how the virtual machine participates in the network and click Next.

On the Ready to complete page, review the details and click Finish to save your changes.



The company's IT strategy is to adopt innovative and emerging technologies such as softwaredefined storage solution. The IT team has decided to run their business-critical workloads on an allflash Virtual SAN (vSAN) as it provides excellent performance.
The IT team has purchased servers that are compatible with vSAN. However, all the solid-state drives (SSD) in the servers are shown incorrectly as hard-disk drives (HDD) instead.
In addition, some of the solid-state drives (SSD) will be used for other purposes instead of vSAN and should not be part of the vSAN cluster. These are the requirements for the vSAN cluster:
-In each server, use the 3GB SSD as the cache tier and the 11GB SSD as the capacity tier
-As a result the vSAN cluster will use a total of six SSDs (three SSDs for caching and three SSDs for capacity
-Ensure all the disks that will be used for vSAN are shown correctly as SSDs
-Provide storage savings by using deduplication and compression.

Next, the IT team wants to improve the performance and availability of the business-critical workloads on the vSAN-datastore. Ensure the following configurations will be applied on existing and new workloads located on vSANdatastore:
Number of disk stripes per object: 2
Primary level of failures to tolerate: 2
Failure tolerance method: RAID-1 (Mirroring)
Force provisioning; Yes
The new configurations should be applied by default.
You may create new storage policy but do not edit the default vSAN storage policy as it may be used by other vSAN clusters in the future. Name the policy "New vSAN Default'. Nate-. All tasks should be executed in PROD-A host cluster.

  1. See Explanation section for answer.

Answer(s): A

Explanation:

VMware vSphere ESXi can use locally attached SSDs (Solid State Disk) and flash devices in multiple ways. Since SSDs offer much higher throughput and much lower latency than traditional magnetic hard disks the benefits are clear. While offering lower throughput and higher latency, flash devices such as USB or SATADOM can also be appropriate for some use cases. The potential drawback to using SSDs and flash device storage is that the endurance can be significantly less than traditional magnetic disks and it can vary based on the workload type as well as factors such as the drive capacity, underlying flash technology, etc.
This KB outlines the minimum SSD and flash device recommendations based on different technologies and use case scenarios.

SSD and Flash Device Use Cases
A non-exhaustive survey of various usage models in vSphere environment are listed below.

Host swap cache
This usage model has been supported since vSphere 5.1 for SATA and SCSI connected SSDs.
USB and low end SATA or SCSI flash devices are not supported. The workload is heavily influenced by the degree of host memory over commitment.

Regular datastore
A (local) SSD is used instead of a hard disk drive.
This usage model has been supported since vSphere 7.0 for SATA and SCSI connected SSDs.
There is currently no support for USB connected SSDs or for low end flash devices regardless of connection type. vSphere Flash Read Cache (aka Virtual Flash) This usage model has been supported since vSphere 5.5 for SATA and SCSI connected SSDs.

There is no support for USB connected SSDs or for low end flash devices. vSAN This usage model has been supported since vSphere 5.5 for SATA and SCSI SSDs. For more information, see the vSAN Hardware Quick Reference Guide. vSphere ESXi Boot Disk A USB flash drive or SATADOM or local SSD can be chosen as the install image for ESXi, the vSphere hypervisor, which then boots from the flash device.

This usage model has been supported since vSphere 3.5 for USB flash devices and vSphere 4.0 for SCSI/SATA connected devices.

Installation to SATA and SCSI connected SSD, SATADOM and flash devices creates a full install image which includes a logging partition (see below) whereas installation to a USB device creates a boot disk image without a logging partition. vSphere ESXi Coredump device The default size for the coredump partition is 2.5 GiB which is about 2.7 GB and the installer creates a coredump partition on the boot device device for vSphere 5.5 and above. After installation the partition can be resized if necessary using partedUtil. For more information, see the vSphere documentation.

Any SATADOM or SATA/SCSI SSD may be configured with a coredump partition.
This usage model has been supported from vSphere 3.5 for boot USB flash devices and since vSphere 4.0 for any SATA or SCSI connected SSD that is local.

This usage model also applies to Autodeploy hosts which have no boot disk. vSphere ESXi Logging device A SATADOM or local SATA/SCSI SSD is chosen as the location for the vSphere logging partition (/scratch partition). This partition may be but need not be on the boot disk and this applies to Autodeploy hosts which lack a boot disk.

This usage model has been supported since vSphere 7.0 for any SATA or SCSI connected SSD that is local. SATADOMs that meet the requirement set forth in Table 1 are also supported. This usage model can be supported in a future release of vSphere for USB flash devices that meet the requirement set forth in Table 1.

SSD Endurance Criteria
The flash industry often uses Tera Bytes Written (TBW) as a benchmark for SSD endurance. TBW is the number of terabytes that can be written to the device over its useful life. Most devices have distinct TBW ratings for sequential and random IO workloads, with the latter being much lower due to Write Amplification Factor (WAF) (defined below). Other measures of endurance commonly used are DWPD (Drive Writes Per Day) and P/E (Program/Erase) cycles.

Conversion formulas are provided here:
Converting DWPD (Drive Writes Per Day) to TBW (Terabytes Written):
TBW = DWPD * Warranty (in Years) * 365 * Capacity (in GB) / 1,000 (GB per TB) Converting Flash P/E Cycles per Cell to TBW (Terabytes Written):
TBW = Capacity (in GB) * (P/E Cycles per Cell) / (1,000 (GB per TB) * WAF) WAF is a measure of the induced writes caused by inherent properties of flash technology. Due to the difference between the storage block size (512 bytes), the flash cell size (typically 4KiB or 8KiB bytes) and the minimum flash erase size of many cells one write can force a number of induced writes due to copies, garbage collection, etc. For sequential workloads typical WAFs fall in the range of single digits while for random workloads WAFs can approach or even exceed 100. Table 1 contains workload characterization for the various workloads excepting the Datastore and vSphere Flash Read Cache workloads which depend on the characteristics of the Virtual Machines workloads being run and thus cannot be characterized here. A WAF from the table can be used with the above P/E to TBW formula.



Page 1 of 5



Post your Comments and Discuss VMware 3V0-22.21 exam with other Community members:

Nagaraj commented on December 20, 2024
The questions help me to review
Anonymous
upvote

Reagan commented on December 20, 2024
Very Useful
Anonymous
upvote

Anonymous commented on December 20, 2024
definitely a perfect set of questions
Anonymous
upvote

DD commented on December 20, 2024
Preparing for exam
Anonymous
upvote

Anonymous1 commented on December 20, 2024
Nice questions
Anonymous
upvote

PrepGoku commented on December 20, 2024
Great list of questions, with full explaination
Anonymous
upvote

Hemlata commented on December 20, 2024
Great content
INDIA
upvote

Nicholos J Frates commented on December 20, 2024
I just passed the Salesforce-AI-Associate exam recently! my Result Card: https://docs.google.com/document/d/1CicoY5IGQwyyanVV_cCEUE2jFT86tyl3FZ_hA6Q_BiM
Anonymous
upvote

Hemlata commented on December 20, 2024
It is useful.
INDIA
upvote

Koomi commented on December 20, 2024
Great Content
Anonymous
upvote

Aamamm commented on December 20, 2024
useful for certfication
UNITED STATES
upvote

Preeti commented on December 20, 2024
How many questions in exam was from dump who give exam recently?
INDIA
upvote

Preeti commented on December 20, 2024
Have any of you taken the exam recently and passed just by using this dump?
INDIA
upvote

gill commented on December 20, 2024
nice nice nice
Anonymous
upvote

Hitesh commented on December 20, 2024
good practice questions available here
UNITED STATES
upvote

KT commented on December 20, 2024
I passed using this dumps.
Anonymous
upvote

Hassan commented on December 19, 2024
Quite challenging and interesting
Anonymous
upvote

mke commented on December 19, 2024
so far so good
UNITED STATES
upvote

JP commented on December 19, 2024
Good so far
UNITED STATES
upvote

Anyah Vincent Ndubuisi commented on December 19, 2024
Microsoft SC 200 SOC, is awesomely good enough for every cybersecurity specialist. Well detailed for freshers also. From Anyah Vincent.Nigeria.
Anonymous
upvote

Shehan commented on December 19, 2024
Superb stuff
Anonymous
upvote

gege commented on December 19, 2024
The questions looks promising and well formatted. But has anyone passed this exam recently? I have heard the exam is very very hard.
Anonymous
upvote

Tejaswini commented on December 19, 2024
For my understanding
Anonymous
upvote

Tejaswini commented on December 19, 2024
Going throught questions for practice
Anonymous
upvote

David commented on December 18, 2024
Nice questions
Anonymous
upvote

Raju commented on December 18, 2024
gave my exam today and many questions were similar though slightly different...I passed with 90%, thanks Braindumps
INDIA
upvote

Bhuppi commented on December 18, 2024
my exam is on 22nd of DEC.
Anonymous
upvote

Mark commented on December 18, 2024
Can someone confirm if these questions are still valid??? After 200-301 v 1.1 has been released? Is the free version enough or were there more of them in the part that is paywalled?
Anonymous
upvote

BT commented on December 18, 2024
test PCEP-30-02 exam
VIET NAM
upvote

anon commented on December 18, 2024
good information for practice
Anonymous
upvote

ABI commented on December 18, 2024
I REYAL LIKE IT
Anonymous
upvote

Manasa commented on December 18, 2024
GOOD PRACTICING
Anonymous
upvote

swathi commented on December 18, 2024
In my opinion, they work well for me, but it depends on how you approach them. My method isn't about memorizing the exact questions and answers from the practice tests to use on the real exam. Instead, I focus on understanding why I got certain questions wrong so I can deepen my comprehension of the material.
Anonymous
upvote

ABI commented on December 18, 2024
IF HELPS FOR EXAM
Anonymous
upvote