Alibaba ACA-Developer Exam Prep
ACA Developer Exam (Page 7 )

• Limiting the number of MAC addresses allowed on a switch port
• Restricting ports to specific known MAC addresses
• Taking an action—such as dropping frames or shutting down the port—when the limit is exceeded

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect some attack traffic, but is not the primary control for switch-port MAC limits.
• NGFW: Filters network traffic at the firewall, but does not directly control MAC addresses learned by a switch.

• True positive: The scan reports a vulnerability that really exists.
• False positive: The scan reports a vulnerability that does not exist.
• True negative: The scan correctly reports no vulnerability.
• False negative: The scan fails to detect a vulnerability that is actually present.

• BCP (Business Continuity Plan): è più ampio e mira a mantenere le funzioni essenziali dell’organizzazione durante un’interruzione. Il DRP è una componente più specifica del BCP.
• Communication plan: stabilisce come comunicare con dipendenti, cittadini e altre parti interessate, ma non ripristina i sistemi.
• IRP (Incident Response Plan): gestisce la risposta iniziale a un incidente di sicurezza, come un attacco informatico, non principalmente il recupero da un disastro fisico.

• Virus signatures: Primarily associated with antivirus or antimalware tools.
• Security agent deployment: Usually handled by endpoint-management or endpoint-security platforms.
• Vulnerability scanning: Performed by vulnerability-assessment tools, although a SIEM may ingest their results.

• Training or coaching
• Mentoring
• Additional support or resources
• Targeted performance improvement plans

• A: Recognition may be appropriate, but awards do not address identified gaps.
• C: Rotating schedules does not necessarily improve the specific competencies that are missing.
• D: Assessment results should be handled sensitively, but keeping them entirely private prevents useful feedback and development discussions.

• The S3 bucket as an origin for static content
• The Application Load Balancer (ALB) as an origin for dynamic content
• An Amazon Route 53 alias record pointing the application domain to CloudFront

Why this works

• Static data: CloudFront caches objects from S3 at edge locations, reducing latency for users worldwide.
• Dynamic data: CloudFront forwards requests that require application processing to the ALB. It can also maintain persistent connections and use the AWS global edge network to improve delivery performance.
• One domain: CloudFront behaviors can route different path patterns to different origins—for example, /static/* to S3 and other paths to the ALB.

Why the other options are incorrect

• Global Accelerator is designed primarily for accelerating traffic to applications with endpoints such as ALBs, not for caching S3 content.
• Using separate domains or splitting static and dynamic traffic adds unnecessary complexity.
• CloudFront already provides the required global edge distribution and caching, so combining it with Global Accelerator is unnecessary here.

• The Azure DevOps (Boards only) connector is designed specifically for Azure DevOps Analytics views.
• It authenticates directly to Azure DevOps and lets you select an existing Analytics view.
• Filters defined in the Analytics view are applied by Azure DevOps before Power BI retrieves the data, reducing the amount of data transferred.

• Azure DevOps Server (Boards only) is for on-premises Azure DevOps Server.
• OData Feed can consume OData endpoints, but it is not the dedicated Azure DevOps Analytics-view connector.
• OData queries are not the intended dedicated connector for this requirement.

• Honeypots: Deliberately vulnerable or attractive systems designed to lure attackers. Legitimate users should not access them, so activity on a honeypot is a strong indicator of compromise.
• DNS sinkholes: Redirect requests for known malicious domains to a controlled internal system instead of allowing the connection. This can identify infected hosts attempting to contact command-and-control infrastructure.

• Tokenization: Replaces sensitive data with non-sensitive tokens; it protects data but does not primarily detect attackers.
• CI/CD: Automates software development and deployment processes.
• Threat modeling: Identifies potential threats and weaknesses before or during system design.
• Data obfuscation: Makes data harder to understand, but it is not an attacker-detection method.

• An Adj-SID does not necessarily need manual configuration.
• It can often be dynamically allocated by the router, although manual configuration may also be possible.
• The adjacency information is advertised through the IGP, such as IS-IS or OSPF.

• It is identified by an Adj-SID.
• It represents a particular adjacency of a node.
• Its meaning is generally local to the advertising node; unlike a Node-SID, it is not a globally reusable instruction across the network.

• Accept: Acknowledging the risk and choosing not to take additional action.
• Transfer: Shifting the risk or financial consequences to another party, such as an insurer.
• Mitigate: Reducing the likelihood or impact through controls, such as patching or access restrictions.
• Avoid: Eliminating the activity that creates the risk.

• Create a CodeCommit repository in the secondary Region.
• Use CodeBuild to run a Git mirror operation from the primary repository to the secondary repository.
• Use EventBridge to detect relevant repository events, such as a pull request being merged.
• Invoke a Lambda function, which starts the CodeBuild project.

• B: Amazon S3 is object storage, not a Git repository that developers can use as a CodeCommit remote.
• C: CodeArtifact is intended for packages and artifacts, not source-code repository mirroring.
• D: An AWS Cloud9 environment is not an appropriate automated replication mechanism and would require manual or persistent infrastructure management.

• The load balancer provides the listener’s frontend IP address.
• The active SQL Server node must also respond to that same listener IP.
• Enabling Floating IP allows the listener IP to be preserved and handled correctly by the active replica.
• Without it, SQL connections may be sent to a node that cannot correctly claim the listener address.

• A health probe for the SQL Server port
• A load-balancing rule using the listener port
• Floating IP enabled on that rule

• Prevention costs: Avoiding defects, such as staff training and improved product design. The company has invested in these.
• Appraisal costs: Detecting defects before products reach customers, such as inspection and testing. The planned batch sampling has not been implemented.
• Internal failure costs: Correcting defects found before delivery.
• External failure costs: Dealing with defects after delivery, such as refunds, replacements, complaints and lost sales.

• Code signing: Verifies the software’s authenticity and integrity; it does not hide the source code or prevent reverse engineering.
• Tokenization: Replaces sensitive data with tokens, mainly for protecting data such as payment information—not software logic.
• Blockchain: Provides a tamper-resistant record of transactions or data; it does not protect compiled code from analysis.

• Custom domain: miami.weyland.com requires a paid App Service tier; Free and Shared are unsuitable.
• Two instances: Standard supports scaling to multiple instances.
• SSL: Standard includes SSL support.
• 12 GB storage: Basic provides only about 10 GB, so it does not meet the requirement. Standard provides substantially more storage.
• Cost minimization: Standard is the lowest tier among the choices that satisfies all requirements.

• B: Developer Edition has limited user, storage, and data-volume capacity, making realistic community testing difficult.
• C: A Developer Edition org cannot contain sandboxes, so it cannot provide separate environments for development, integration, and UAT.
• E: A standalone Developer Edition org is not part of the production org’s deployment path, so change sets cannot be used to deploy from it directly to that production org. The team would need Metadata API, Salesforce CLI, or another deployment method.

• Data source: Folder
• Transformation: Remove the Content column (or keep only the file-metadata columns)

Why

• File name
• Extension
• Date modified
• Folder path
• Content — the binary contents of the file

• Liability accounts (2000–2999) would incorrectly require dimensions, although they should have none.
• Expense accounts (6000–6998) would incorrectly require Customer, which should be optional.
• Account 6999 needs a separate rule because it requires all four dimensions, including Customer.

• 2000–2999: no dimensions
• 4000–4999: Department and Division required; Project and Customer optional
• 6000–6998: Department, Division, and Project required; Customer optional
• 6999: Department, Division, Project, and Customer required

• B. Deploy to a SageMaker endpoint: This is needed for SageMaker-hosted models, not for a model intended to be used directly in Amazon Bedrock.
• C. Register with SageMaker Model Registry: SageMaker Model Registry is unrelated to invoking custom models in Bedrock.
• D. Grant access in Bedrock: Access permissions may be necessary, but they do not replace the required provisioned capacity.

• Measurement bias: Errors in how features or labels are measured, such as unreliable camera data or inconsistent labeling.
• Observer bias: A human evaluator’s subjective judgment influencing observations or labels.
• Confirmation bias: Favoring information that supports an existing belief.

• LastName: Required.
• FirstName: Optional.
• AccountId: Optional; a Contact may be associated with an Account later or remain private, depending on organization settings.
• Name: A compound display field made from first and last name; it isn’t entered as a separate field.

• Two-part tariff pricing: $10 per unit
• Dual pricing: $20 per unit

Two-part tariff pricing

Dual pricing

• Division X, the seller, is credited with the market price: \(\$20\)
• Division Y, the buyer, is charged the marginal cost: \(\$10\)

• Microsoft Purview portal: Create and manage sensitivity labels and configure support for sensitivity labels used with Office files in SharePoint and OneDrive.
• SharePoint admin center: Primarily manages SharePoint settings. Older guidance and PowerShell procedures used SharePoint tenant configuration, which can make this question confusing.
• IRM: Concerns Information Rights Management and is a separate protection mechanism; it should not be used to identify the portal for configuring Microsoft Purview sensitivity labels.

• A: Not expanding would increase its dependence.
• B: More business from the same corporation would make dependence worse.
• D: Passing work to other minority businesses does not solve its own dependence.
• E: The passage does not suggest that it can force or influence the corporation to give work to others.

• Three DHCP scopes: Each VLAN has its own IPv4 subnet. DHCP scopes are subnet-specific, so create one scope for:

• Two DHCP relays: DHCP client discovery begins as a broadcast, and broadcasts do not cross routers or VLAN boundaries. Therefore, configure a DHCP relay on the router or Layer 3 switch interface for each client VLAN.

• CSIRT: A team that responds to and manages security incidents.
• CVSS: A scoring system for rating the severity of vulnerabilities.
• SOAR: A technology platform for automating and coordinating security operations and incident response.

• Disable high concurrency: Changes workspace-wide behavior and is not the targeted way to isolate these workloads.
• Modify the number of executors: Adjusts capacity and performance, but does not provide workload isolation.
• Set the default environment: Controls libraries and runtime configuration, not compute isolation.

• AB’s own PPE: $100m
• CD’s PPE in its individual accounts: $50m
• Fair value uplift at acquisition: $40m
• Remaining useful life: 10 years
• Extra depreciation each year: $40m ÷ 10 = $4m
• Four years’ extra depreciation to 31 December 20X4: 4 × $4m = $16m
• Remaining fair value uplift: $40m - $16m = $24m

• Access controls — ensuring only authorized users can access it.
• Encryption — protecting the data if it is intercepted or exposed.

• The job keeps 31 days of regular restore points. A backup from the week of January 1 is older than 31 days by March 20, so it is no longer expected to remain on the performance tier.
• It is also a weekly GFS full backup, retained for 14 weeks. Therefore, it is still protected and has not been deleted.
• In a Scale-out Backup Repository, older backups can be moved from the performance tier to the capacity tier—typically object storage—according to the configured offload policy.
• The archive tier is not selected because the question’s configuration does not indicate that the backup has been archived there.

• Highly polished, organization-wide presentations
• Advanced dashboard design and customization
• Broader business-user distribution and interaction
• Specialized BI governance and modeling features

• B — The most significant risks are held by SQ.

• C — SQ should recognise the cars as inventory.

• F — SQ recognises revenue when LM sells a car to a third party.

• A: LM does not hold the most significant risks.
• D: LM does not recognise the cars as inventory.
• E: SQ should not recognise revenue when cars are merely delivered to LM.

• Preparing and managing datasets
• Building and training machine-learning models
• Testing and evaluating models
• Deploying models as endpoints for predictions

• B — Data source settings in Power BI Desktop:

• D — Formula bar in Power Query Editor:

m 
  Excel.Workbook(File.Contents("new path"))

• E — Advanced Editor in Power Query Editor:

• A: Dataset settings in the Power BI service mainly handle credentials and gateway settings, not changing the local file path embedded in the PBIX.
• C: Current File data-load settings control refresh/load behavior, not the source location.

• Streams — track change data for tables or views.
• External tables — reference data stored in an external cloud storage location.

• Role — account-level security object.
• Warehouse — account-level compute resource.
• User — account-level security object.
• Share — account-level object used to share data.

• Keep earlier prompt versions.
• Identify the last version that produced acceptable output.
• Restore it as a baseline.
• Make small, controlled changes—ideally one significant change at a time.
• Test the output after each change.

• A: Discards useful information about what worked.
• B: Large simultaneous changes make it difficult to identify the cause of problems.
• D: Accepts output that does not meet the requirements.

• Which host first communicated with the suspected malicious source
• Whether that host initiated suspicious traffic or merely received it
• Which other hosts show evidence of infection, such as connections from the originating host
• Which hosts have no related suspicious activity and are therefore clean

• An outbound connection to a suspicious external address
• A downloaded or executed malicious file
• Later lateral connections from that host to other internal systems
• Firewall logs showing the direction and timing of the traffic

• Red team: Simulates attackers and tests exploitability.
• Blue team: Defends, monitors, detects, and responds to attacks.
• Purple team: Combines red- and blue-team activities to improve cooperation and defenses.
• White team: Manages and oversees the rules, scope, and authorization of the exercise.

• Frequency/likelihood = how often or how likely the risk is to occur.
• Severity/impact = how damaging or costly the consequences would be.

• A minor equipment fault occurring frequently may have high frequency but low severity.
• A major cyberattack occurring rarely may have low frequency but high severity.
• A risk that happens often and causes substantial losses has high frequency and high severity.

• A. Adjust resolution: Incorrect because an incompatible resolution usually causes no display, distortion, or an unsupported-mode message—not intermittent flickering.
• B. Swap the HDMI cable: Correct. Replacing the common, easily tested component is the appropriate troubleshooting step.
• C. Replace the projector: Incorrect because the issue also occurs with a monitor.
• D. Configure refresh rate: A mismatched refresh rate can cause visual problems, but the repeated flicker across displays points more strongly to the cable.

• Minimum
• Maximum
• Average
• Count
• Null/empty values
• Distinct values

• Enable column profile
• Enable details pane
• Show column profile in details pane

• Regression predicts continuous numeric outcomes, such as house price, temperature, or sales amount.
• Linear regression assumes the target can be estimated from a linear relationship between the input features and the target.
• In Azure Machine Learning, you use a labeled dataset containing:

• Classification predicts a category or class, such as “spam” or “not spam.”
• Clustering groups similar records without a known label; it is an unsupervised learning technique.

• Power BI dataset — Reuses the existing tables, relationships, and measures. You mainly create new visualizations.
• SharePoint folder — Connects to the source files, but you would need to rebuild the model and measures.
• Power BI dataflows — Primarily provide reusable data preparation; they do not automatically provide the existing report’s measures and model.
• Excel workbook — Requires reconnecting to and modeling the source data again.

• Verifies the sender’s identity using their private key.
• Confirms the transaction was not altered after signing.
• Provides evidence that the signer approved or originated the transaction.

• Digital certificates: Bind an identity to a public key, but do not themselves prove that a specific transaction was signed.
• Encrypted passwords: Protect confidentiality or authentication, but generally do not provide transaction-level nonrepudiation.
• One-time passwords: Authenticate a user for a session or transaction, but usually do not provide durable proof of who authorized the electronic record.

• Firewall
• Intrusion prevention and detection
• Antivirus or antimalware
• Web and email filtering
• Virtual private networking (VPN)
• Sometimes content filtering and centralized reporting

• A local network gateway represents an on-premises network—its address space and VPN device information—for an Azure Site-to-Site VPN connection.
• It does not control which connection types are allowed between Azure web servers and database servers.
• It is also unnecessary when both server groups are in the same Azure virtual network.

• C: Develop the rule in the Rules Editor, define the events, match, and condition sections, then use the test rule feature. This directly validates the YARA-L rule without enabling it in production.
• A: UDM Search can help investigate data and refine filters, but it does not fully test YARA-L logic—especially complex event joins, match windows, and conditions.

• Restrict a port to a defined number of MAC addresses
• Use statically assigned or “sticky” MAC addresses
• Shut down or restrict the port when violations occur

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect suspicious network activity, but is not the primary control for limiting switch MAC entries.
• NGFW: Filters traffic at the network boundary; it does not directly prevent MAC table flooding on access switches.

1. Write a structured log entry to CloudWatch Logs containing:

1. Create a CloudWatch Logs metric filter that:

text 
ApiRequests 
Operation=GetOrders 
ResponseCode=500 
Version=2.4.0

• B is incorrect: CloudWatch Logs Insights queries analyze logs but do not directly publish metrics in this manner.
• C is incorrect: ALB access logs do not contain arbitrary Lambda response metadata as custom fields.
• D is incorrect: X-Ray traces and insights are not the appropriate mechanism for creating these custom, dimensioned application metrics.

• Label applied does not automatically exclude a file from Copilot.
• Encryption/usage rights determine whether Copilot can access the file’s content.
• If the user has no permission under Label2, File3 should be unavailable to Copilot for that user.
• File3’s label might be inherited by derived content only if File3 was actually processed and contributed by an authorized user; it should not be treated as contributing merely because it exists in the source set.