Amazon ANS-C01 Exam Prep
AWS Certified Advanced Networking - Specialty ANS-C01 (Page 2 )

1. Modify the database subnet NACL inbound rules to allow traffic from the new web subnet’s CIDR block on the MySQL port (3306).
2. Modify the database subnet NACL outbound rules to allow return traffic to the new web subnet’s CIDR block on the required ephemeral port range.

• ARP poisoning: Redirects or intercepts local network traffic; it would more likely affect communication paths or cause man-in-the-middle behavior.
• Jamming: Interferes with wireless signals. The scenario does not indicate a wireless outage.
• Kerberoasting: Attempts to obtain service-account password hashes from Kerberos; it is a credential attack, not typically a direct service outage.

• A: Security groups do not control traffic to an S3 gateway endpoint in this way. Gateway endpoints are configured through route tables.
• B: An S3 bucket policy may be needed for authorization, but the error specifically indicates a connectivity or endpoint-routing problem.
• C: Glue connection settings do not require a fully qualified domain name to resolve this endpoint issue.

• Wiping securely overwrites the drive so the original data cannot reasonably be recovered. It is generally less expensive than physically destroying the device.
• Recycling could expose the data if the drive is not securely erased first.
• Shredding physically destroys the drive and is effective, but usually more costly and prevents reuse.
• Deletion only removes file references; it is not a secure sanitization method.

• Microsoft 365 groups can contain users, but generally can’t contain other groups as members.
• Security groups can contain users and, where supported, other security groups.
• Distribution groups have different nesting restrictions and aren’t equivalent to security groups.
• Dynamic groups can’t be manually populated with members; their membership is calculated from rules.
• A group’s membership type (Assigned or Dynamic) and group type determine whether it can be added to another group.

• A. A virtual network gateway
• D. A virtual network

• Azure virtual machines must be connected to an Azure virtual network (VNet). The VNet provides private IP addressing and network connectivity for the VMs.
• A virtual network gateway enables communication between the Azure VNet and the on-premises network, typically through a site-to-site VPN or ExpressRoute connection.

• Load balancer: Distributes traffic among Azure VMs; it does not connect Azure to an on-premises network.
• Application gateway: Provides web-application load balancing and Layer 7 routing; it is not the normal resource for on-premises connectivity.
• Gateway subnet: A gateway subnet is required inside the VNet when deploying a virtual network gateway, but the question’s intended two primary resources are the VNet and virtual network gateway.

• Batch processing, such as scheduled data transformations
• Streaming processing, such as continuously ingesting events

• Manipulating data with multiple languages: Mainly a benefit of Databricks and Spark.
• Real-time notebook collaboration: A workspace/notebook feature.
• Alerts for query failures: A Databricks SQL or job-monitoring feature.
• Distributing complex operations: Primarily a Spark compute capability.

• A laptop
• Software access
• A password reset
• A mobile phone

• They run behind the scenes — applies more to automation or workflows.
• They are optional — catalog items are fundamental to a request-based catalog.
• They provide options — variables and variable options collect the requester’s choices for an item; they are not the catalog item itself.

1. Identify the fact table

• Records something that happened, such as a sale, test, appointment, or measurement
• Contains foreign keys to other tables
• Contains measures or numeric results
• Has many rows

2. Identify a dimension table

• Describe people, products, dates, locations, or departments
• Contain descriptive columns
• Are referenced by the fact table
• Have fewer rows than the fact table

3. Identify the surrogate key

• System-generated
• Unique within the dimension
• Often named PatientKey, CustomerKey, or similar
• Usually an integer
• Not meaningful outside the model

• Server — provides services or resources
• Endpoint — a user device connected to the network
• Ethernet — a networking technology, not a filtering device
• Firewall — filters and controls traffic

• Admin access to the deployment pipeline (B) – lets the developers use the pipeline and deploy content.
• Contributor access to the Development and Test workspaces (E) – required to deploy items into those workspaces.
• Viewer access to the Production workspace (D) – lets them view Production content without allowing deployment or modification.

• Contributor access to Production (F), because that could allow changes or deployment there.
• Viewer access to Development/Test (C), because Viewer is insufficient for deployment.
• Build permission to Production semantic models (A), because building reports on a semantic model is not required merely to view Production items.

• Elicited and documented customer requirements
• Converted them into clear, measurable specifications
• Validated the requirements with the customer
• Used them as the basis for design, quality checks, and acceptance

• A: Requirements should reflect the customer’s needs—not the supplier’s standards.
• B: Iteration review planning does not replace proper requirements collection.
• D: A retrospective occurs after work is completed and is mainly for process improvement, not initial requirements definition.

• Data loss prevention (DLP): Helps detect or prevent sensitive data from being copied or transmitted, but it does not primarily protect a stolen laptop’s stored data.
• Operating system hardening: Reduces vulnerabilities and attack surface but does not encrypt files if the device is stolen.
• Boot security: Helps ensure that only trusted software starts, but it does not fully protect the drive if an attacker accesses it offline.

• Leaf switches provide access ports for servers, endpoints, and other devices.
• Spine switches form the fabric’s backbone.
• Every leaf connects to every spine, creating a predictable, high-bandwidth, low-latency path.

• A: Adding both a spine and leaf is unnecessary for simply adding access ports.
• B: Adding a spine does not directly provide endpoint access ports.
• D: A single connection to one spine creates a bottleneck and a single point of failure.

1. Product + ProductSubCategory: Inner join

1. Result + ProductCategory: Left outer join

• The explanation states that Traffic Analytics can be enabled by a user with one of these subscription-level roles:

• Question 34 — Network Contributor: Yes
• Question 35 — Owner: Yes
• Question 36 — Reader: Yes, according to the stated explanation and documentation

• Digitally signing the software: Verifies authenticity and integrity. It does not hide how the software works.
• Limiting third-party libraries: May reduce dependencies and attack surface, but does not directly prevent reverse engineering.
• Using compile flags: Some compiler options can remove debugging information or optimize code, which may provide limited protection, but this is not the primary technique identified for preventing reverse engineering.

• C series: CPU-optimized instances; not designed primarily for LLM training.
• G series: GPU instances generally optimized for graphics and some machine learning workloads, but not specifically large-scale model training efficiency.
• P series: Powerful GPU instances for ML training, but typically consume more energy than Trainium-based instances for suitable training workloads.

• Resources that do not need internet access should remain on private network segments.
• Internet-facing access should be restricted to systems that require it.
• Access should be explicitly allowed rather than broadly exposed.

• A: A single administrator with access to core functions may violate least privilege if that access is broader than necessary.
• B: Inspecting traffic supports monitoring and defense, but does not itself limit privileges.
• C: Updating routing configurations supports availability and connectivity, not least privilege.

• Microsoft Teams: Connects to Teams-related data, but it isn’t the primary connector for the Power Apps data tables.
• Personal Analytics: Provides personal productivity insights, not application data.
• SQL Server database: Only applies if the app explicitly uses SQL Server as its data source.
• Dataflows: Used for preparing and centralizing data, not as the normal direct connection to a Power Apps app.

• An Azure pay-as-you-go subscription follows an operational expenditure (OpEx) model.
• With OpEx, the organization pays for services as they are used, typically based on consumption.
• There is no need to purchase and maintain physical servers upfront.
• This contrasts with capital expenditure (CapEx), where the company makes a significant upfront investment in infrastructure, such as on-premises Hyper-V hosts.

• IaaS: You manage the virtual machine’s operating system, configuration, applications, and data. Azure manages the physical infrastructure and virtualization platform.
• PaaS: You deploy applications without managing the underlying operating system or servers.
• SaaS: You consume a complete application managed by the provider, such as Microsoft 365.

sql 
SELECT COUNT(*) FROM table;

• A: It does not normally need to scan all data files for this operation.
• B: Results are not simply reused from a query cache every time. Caching is separate from Delta’s metadata optimization.
• D: The relevant metadata is maintained through the Delta transaction log, not directly treated as a Parquet-file metadata operation in this context.

• Discovers sensitive data in Amazon S3 buckets
• Uses machine learning and pattern matching to identify data such as personally identifiable information (PII)
• Helps assess S3 security and privacy risks
• Generates findings for potentially sensitive or exposed data

• Amazon Detective: Investigates security findings and performs root-cause analysis.
• Amazon GuardDuty: Detects threats and suspicious activity across AWS accounts and workloads.
• AWS IAM Access Analyzer: Identifies resources that are accessible from outside their intended trust zone, such as publicly accessible S3 buckets.

• IPsec: Protects traffic at the network layer, commonly for VPNs; it is not WPA2’s authentication protocol.
• SSL: Protects specific application sessions and has largely been replaced by TLS.
• SSH: Secures remote command-line administration.

• Restarting the device: May fix software glitches, but would not usually make cable orientation matter.
• Swollen battery: A safety concern, but it would not typically cause recognition only in one cable orientation.
• Failing cable: Possible, but less likely because the problem occurs with this particular device and not other devices of the same type.

sql 
CREATE TABLE my_table 
USING CSV 
OPTIONS (path '/path/to/csv');

sql 
CREATE TABLE my_table 
USING CSV 
LOCATION '/path/to/csv';

• USING CSV specifies the file format.
• path or LOCATION specifies where the files are stored.
• USING DELTA would be used only when the source data is in Delta format.
• FROM is used in a SELECT statement, not normally as the format declaration in CREATE TABLE.

• principal represents the source or initiating system.
• principal.port is the source port.
• target represents the destination system.
• target.port is the destination port.

text 
principal.port = 5555

• network.ApplicationProtocol = HTTP identifies HTTP traffic but not the backdoor specifically.
• target.port = 5555 finds traffic going to port 5555, rather than originating from it.
• network.ip_protocol = TCP is too broad because many services use TCP.

• Actual filename: Document.xml.txt
• Explorer displays: Document.xml
• File type: Text Document (.txt)

text 
Document.txt ? Document.xml

• The listener has a virtual IP address on the load balancer.
• The active SQL Server replica must respond using the listener’s IP address, not its own VM IP.
• Floating IP allows the listener IP to be preserved and returned by the active replica.
• This is required for the SQL Always On listener configuration.

• A health probe for the SQL listener/cluster role
• The SQL Server listener port, commonly 1433
• Appropriate backend pool membership

• Espionage: Stealing information for intelligence or competitive purposes.
• Data exfiltration: Unauthorized removal or transfer of data.
• Nation-state attack: An attack sponsored or conducted by a government.
• Shadow IT: Technology or access methods used outside approved IT processes.

• 16 VMs: one failure loses 25 GB and 10 cores—only 6.25% of memory.
• 8 VMs: one failure loses 12.5% of memory.
• 4 VMs: one failure loses 25%.
• 1 VM: one failure loses the entire application environment.

• B. Users accessing Salesforce from public Wi-Fi

• C. Users choosing the same password as their Facebook password

• A: 2FA does not protect an already-authenticated, unlocked session if someone accesses an unattended laptop.
• D: Weak password-reset questions are an account-recovery weakness. 2FA primarily strengthens login authentication, not necessarily the security-question reset process.

json 
{ 
  "Effect": "Deny", 
  "NotAction": [ 
    "iam:*", 
    "route53:*", 
    "cloudfront:*", 
    "support:*" 
  ], 
  "Resource": "*", 
  "Condition": { 
    "StringNotEquals": { 
      "aws:RequestedRegion": "eu-west-1" 
    } 
  } 
}

• SCPs set maximum permissions; they do not grant permissions. The default SCP allows actions, so the restriction must be an explicit Deny.
• aws:RequestedRegion checks the Region targeted by an API request.
• StringNotEquals: eu-west-1 denies requests directed to every other Region.
• NotAction allows designated global services to remain usable because they do not operate in a single AWS Region.
• Attaching the SCP to the OU makes it apply to existing accounts and accounts later added to that OU.

• Drops packets when traffic exceeds a certain bitrate: This describes traffic policing, not shaping.
• Fragments large packets and queues them: Shaping does not fragment packets as its primary congestion-control action.
• Drops packets randomly from lower-priority queues: Packet dropping may occur if a shaping queue becomes full, but it is not the defining behavior.

• Shaping: buffers and delays excess traffic.
• Policing: drops or marks traffic that exceeds the configured rate.

• The requirement explicitly says the organization wants to use SAML to secure Salesforce API access.
• The SAML Bearer Assertion Flow exchanges a SAML assertion for a Salesforce OAuth access token.
• It is intended for server-to-server or other noninteractive integrations where the application has already been authenticated by an identity provider.
• The connected app can be configured so administrators authorize or preauthorize applications that consume the APIs.

• B — JWT Bearer Flow: Uses a signed JWT, not a SAML assertion. It would be appropriate if the requirement specified JWT-based authentication.
• C — SAML Assertion Flow: This is not the standard Salesforce OAuth flow name; the relevant name is OAuth 2.0 SAML Bearer Assertion Flow.
• D — User-Agent Flow: Designed for interactive browser-based authorization, not a SAML-based server-to-server integration.

• Business
• People
• Governance
• Platform
• Security
• Operations

• Program and project management
• Risk management
• Cloud financial management
• Data governance
• Portfolio management

• Sustainability
• Performance efficiency
• Reliability

• A larger question bank with verified answers
• Explanations tied to ISACA exam domains
• Current content aligned with the exam blueprint
• Useful review or progress features

• Modelo de embeddings multimodal: transforma texto e imagens em vetores no mesmo espaço semântico. Isso permite comparar uma consulta textual com imagens, ou uma imagem com textos relacionados.
• Modelo generativo multimodal: interpreta diferentes modalidades e gera conteúdo, mas não é a escolha específica para indexação e busca vetorial.
• Modelo de geração de imagens: cria imagens, portanto é inadequado.
• Modelo de embeddings de texto: não atende consultas com imagens.

• Authentication: Verifies a user’s identity, such as username and password.
• Authorization: Determines what the authenticated user is allowed to access.
• Accounting: Records connection and usage details, such as login time or session duration.

• CIA: Confidentiality, integrity, and availability are broad security objectives, not a specific RADIUS function.
• ACL: An access control list contains permit/deny rules on systems or network devices. RADIUS can support access decisions but is not itself an ACL.
• PEM: Privacy-Enhanced Mail is also associated with certificate and key encoding formats; it is unrelated to RADIUS’s primary purpose.

• Approve major information security policies
• Allocate funding and resources
• Set the organization’s risk appetite
• Ensure security supports business objectives

• Evaluating vendors is generally handled by security, procurement, or technical teams.
• Assessing risks is typically performed by security and risk-management professionals, with management accepting or prioritizing the risks.
• Monitoring regulatory adherence is usually handled by compliance, audit, or security functions.

• Planning — identify the need, objectives, resources and feasibility.
• Analysis — determine user requirements and examine the existing system.
• Design — specify how the new system will work.
• Implementation — build, test, install and introduce the system.
• Maintenance/evaluation — monitor and improve the system after implementation.

• Default network device credentials: More associated with external attackers or poor device configuration.
• Spear phishing emails: Commonly used to compromise users, but less characteristic of an insider who already has access.
• Typosquatting and impersonation: Primarily social-engineering techniques aimed at deceiving users.
• Unidentified removable devices: Provide a direct way to transfer data outside the organization and may bypass network monitoring.

• Help the team identify the causes of delays.
• Encourage continuous improvement through retrospectives.
• Support the team in changing its process, tools, or collaboration methods.
• Help remove impediments that the team cannot resolve independently.

• A: An impediment log may help, but simply maintaining it does not ensure the impediments are resolved.
• B: Directing the team to solutions conflicts with agile self-management.
• C: Adding impediments to the product backlog could delay their resolution and treats them like product features.

• AWS Audit Manager continuously collects evidence from AWS services and helps assess whether workloads comply with regulatory frameworks and internal policies. It can produce audit-ready reports.
• AWS Config records resource configurations and evaluates them against compliance rules. For example, it can check whether encryption, logging, or access settings meet company requirements.

• Amazon Inspector identifies software vulnerabilities and unintended network exposure, not general policy or regulatory compliance.
• Amazon CloudWatch monitors metrics, logs, and operational events, but is not primarily a compliance assessment service.
• AWS CloudTrail records API activity for auditing and investigation. It supports compliance, but does not itself provide the structured compliance assessment capabilities of Audit Manager and Config.

• B — Increase provisioned concurrency for Lambda

• D — Refactor the Lambda functions

• E — Use Amazon RDS Proxy

• Port 515: LPD/LPR line-printer service
• Port 631: IPP — Internet Printing Protocol
• Port 9100: JetDirect/RAW printing, commonly used by network printers

• Linux machine: Linux could run these services, but the three printer-specific ports strongly indicate a printer.
• Router: Routers may use Telnet and HTTP, but normally would not expose ports 515, 631, and 9100 together.
• Windows machine: Windows can share printers, but this particular service combination is more characteristic of a network printer’s embedded operating system.

• The inference container image or built-in algorithm
• The location of model artifacts in Amazon S3
• IAM permissions through the execution role
• Optional environment variables and networking settings

1. Create AWS::SageMaker::Model
2. Create an AWS::SageMaker::EndpointConfig that references the model
3. Create AWS::SageMaker::Endpoint that references the endpoint configuration

• AWS::SageMaker::Endpoint hosts a model but does not define the model itself.
• AWS::SageMaker::NotebookInstance provides a development environment.
• AWS::SageMaker::Pipeline orchestrates ML workflow steps.