support@Free-Braindumps.com
Register Login
Cisco
CompTIA
ISC
EC-Council
EXIN
Fortinet
ITIL
Juniper
Microsoft
VMware
Avaya
SAP
Google
NVIDIA
Salesforce
Amazon
Palo Alto Networks
ISC2
CrowdStrike
Anthropic
All Vendors
  1. Home
  2. Exams
  3. Amazon
  4. AWS Certified Advanced Networking - Specialty ANS-C01

Free AWS Certified Advanced Networking - Specialty ANS-C01 Exam Braindumps
AWS Certified Advanced Networking - Specialty ANS-C01 Questions 73–80 (page: 11)

Updated On: 29-May-2026
Page 11 of 38
PDF with 296 Questions

A company is developing an application in which IoT devices will report measurements to the AWS Cloud. The application will have millions of end users. The company observes that the IoT devices cannot support DNS resolution. The company needs to implement an Amazon EC2 Auto Scaling solution so that the IoT devices can connect to an application endpoint without using DNS.

Which solution will meet these requirements MOST cost-effectively?

  1. Use an Application Load Balancer (ALB)-type target group for a Network Load Balancer (NLB). Create an EC2 Auto Scaling group. Attach the Auto Scaling group to the ALB. Set up the IoT devices to connect to the IP addresses of the NLB.
  2. Use an AWS Global Accelerator accelerator with an Application Load Balancer (ALB) endpoint. Create an EC2 Auto Scaling group. Attach the Auto Scaling group to the AL Set up the IoT devices to connect to the IP addresses of the accelerator.
  3. Use a Network Load Balancer (NLB). Create an EC2 Auto Scaling group. Attach the Auto Scaling group to the NLB. Set up the IoT devices to connect to the IP addresses of the NLB.
  4. Use an AWS Global Accelerator accelerator with a Network Load Balancer (NLB) endpoint. Create an EC2 Auto Scaling group. Attach the Auto Scaling group to the NLB. Set up the IoT devices to connect to the IP addresses of the accelerator.

Answer(s): C



A company has deployed a new web application on Amazon EC2 instances behind an Application Load Balancer (ALB). The instances are in an Amazon EC2 Auto Scaling group. Enterprise customers from around the world will use the application. Employees of these enterprise customers will connect to the application over HTTPS from office locations.

The company must configure firewalls to allow outbound traffic to only approved IP addresses. The employees of the enterprise customers must be able to access the application with the least amount of latency.

Which change should a network engineer make in the infrastructure to meet these requirements?

  1. Create a new Network Load Balancer (NLB). Add the ALB as a target of the NLB.
  2. Create a new Amazon CloudFront distribution. Set the ALB as the distribution's origin.
  3. Create a new accelerator in AWS Global Accelerator. Add the ALB as an accelerator endpoint.
  4. Create a new Amazon Route 53 hosted zone. Create a new record to route traffic to the ALB.

Answer(s): C



A company has hundreds of VPCs on AWS. All the VPCs access the public endpoints of Amazon S3 and AWS Systems Manager through NAT gateways. All the traffic from the VPCs to Amazon S3 and Systems Manager travels through the NAT gateways. The company's network engineer must centralize access to these services and must eliminate the need to use public endpoints.

Which solution will meet these requirements with the LEAST operational overhead?

  1. Create a central egress VPC that has private NAT gateways. Connect all the VPCs to the central egress VPC by using AWS Transit Gateway. Use the private NAT gateways to connect to Amazon S3 and Systems Manager by using private IP addresses.
  2. Create a central shared services VPC. In the central shared services VPC, create interface VPC endpoints for Amazon S3 and Systems Manager to access. Ensure that private DNS is turned off. Connect all the VPCs to the central shared services VPC by using AWS Transit Gateway. Create an Amazon Route 53 forwarding rule for each interface VPC endpoint. Associate the forwarding rules with all the VPCs. Forward DNS queries to the interface VPC endpoints in the shared services VPC.
  3. Create a central shared services VP In the central shared services VPC, create interface VPC endpoints for Amazon S3 and Systems Manager to access. Ensure that private DNS is turned off. Connect all the VPCs to the central shared services VPC by using AWS Transit Gateway. Create an Amazon Route 53 private hosted zone with a full service endpoint name for Amazon S3 and Systems Manager. Associate the private hosted zones with all the VPCs. Create an alias record in each private hosted zone with the full AWS service endpoint pointing to the interface VPC endpoint in the shared services VP
  4. Create a central shared services VPC. In the central shared services VPC, create interface VPC endpoints for Amazon S3 and Systems Manager to access. Connect all the VPCs to the central shared services VPC by using AWS Transit Gateway. Ensure that private DNS is turned on for the interface VPC endpoints and that the transit gateway is created with DNS support turned on.

Answer(s): D



A company manages resources across VPCs in multiple AWS Regions. The company needs to connect to the resources by using its internal domain name. A network engineer needs to apply the aws.example.com DNS suffix to all resources.

What must the network engineer do to meet this requirement?

  1. Create an Amazon Route 53 private hosted zone for aws.example.com in each Region that has resources.
    Associate the private hosted zone with that Region's VPC. In the appropriate private hosted zone, create DNS records for the resources in each Region.
  2. Create one Amazon Route 53 private hosted zone for aws.example.com. Configure the private hosted zone to allow zone transfers with every VPC.
  3. Create one Amazon Route 53 private hosted zone for example.com. Create a single resource record for aws.example.com in the private hosted zone. Apply a multivalue answer routing policy to the record. Add all VPC resources as separate values in the routing policy.
  4. Create one Amazon Route 53 private hosted zone for aws.example.com. Associate the private hosted zone with every VPC that has resources. In the private hosted zone, create DNS records for all resources.

Answer(s): D



An insurance company is planning the migration of workloads from its on-premises data center to the AWS Cloud. The company requires end-to-end domain name resolution. Bi-directional DNS resolution between AWS and the existing on-premises environments must be established. The workloads will be migrated into multiple VPCs. The workloads also have dependencies on each other, and not all the workloads will be migrated at the same time.

Which solution meets these requirements?

  1. Configure a private hosted zone for each application VPC, and create the requisite records. Create a set of Amazon Route 53 Resolver inbound and outbound endpoints in an egress VPC. Define Route 53 Resolver rules to forward requests for the on-premises domains to the on-premises DNS resolver. Associate the application VPC private hosted zones with the egress VPC, and share the Route 53 Resolver rules with the application accounts by using AWS Resource Access Manager. Configure the on-premises DNS servers to forward the cloud domains to the Route 53 inbound endpoints.
  2. Configure a public hosted zone for each application VPC, and create the requisite records. Create a set of Amazon Route 53 Resolver inbound and outbound endpoints in an egress VPC. Define Route 53 Resolver rules to forward requests for the on-premises domains to the on-premises DNS resolver. Associate the application VPC private hosted zones with the egress VPC. and share the Route 53 Resolver rules with the application accounts by using AWS Resource Access Manager. Configure the on-premises DNS servers to forward the cloud domains to the Route 53 inbound endpoints.
  3. Configure a private hosted zone for each application VPC, and create the requisite records. Create a set of Amazon Route 53 Resolver inbound and outbound endpoints in an egress VP Define Route 53 Resolver rules to forward requests for the on-premises domains to the on-premises DNS resolver. Associate the application VPC private hosted zones with the egress VP and share the Route 53 Resolver rules with the application accounts by using AWS Resource Access Manager. Configure the on-premises DNS servers to forward the cloud domains to the Route 53 outbound endpoints.
  4. Configure a private hosted zone for each application VPC, and create the requisite records. Create a set of Amazon Route 53 Resolver inbound and outbound endpoints in an egress VPC. Define Route 53 Resolver rules to forward requests for the on-premises domains to the on-premises DNS resolver. Associate the Route 53 outbound rules with the application VPCs, and share the private hosted zones with the application accounts by using AWS Resource Access Manager. Configure the on-premises DNS servers to forward the cloud domains to the Route 53 inbound endpoints.

Answer(s): C



A global company runs business applications in the us-east-1 Region inside a VPC. One of the company's regional offices in London uses a virtual private gateway for an AWS Site-to-Site VPN connection tom the VPC. The company has configured a transit gateway and has set up peering between the VPC and other VPCs that various departments in the company use.

Employees at the London office are experiencing latency issues when they connect to the business applications.

What should a network engineer do to reduce this latency?

  1. Create a new Site-to-Site VPN connection. Set the transit gateway as the target gateway. Enable acceleration on the new Site-to-Site VPN connection. Update the VPN device in the London office with the new connection details.
  2. Modify the existing Site-to-Site VPN connection by setting the transit gateway as the target gateway. Enable acceleration on the existing Site-to-Site VPN connection.
  3. Create a new transit gateway in the eu-west-2 (London) Region. Peer the new transit gateway with the existing transit gateway. Modify the existing Site-to-Site VPN connection by setting the new transit gateway as the target gateway.
  4. Create a new AWS Global Accelerator standard accelerator that has an endpoint of the Site-to-Site VPN
    connection. Update the VPN device in the London office with the new connection details.

Answer(s): A



A company has a hybrid cloud environment. The company's data center is connected to the AWS Cloud by an AWS Direct Connect connection. The AWS environment includes VPCs that are connected together in a hub- and-spoke model by a transit gateway. The AWS environment has a transit VIF with a Direct Connect gateway for on-premises connectivity.

The company has a hybrid DNS model. The company has configured Amazon Route 53 Resolver endpoints in the hub VPC to allow bidirectional DNS traffic flow. The company is running a backend application in one of the VPCs.

The company uses a message-oriented architecture and employs Amazon Simple Queue Service (Amazon SQS) to receive messages from other applications over a private network. A network engineer wants to use an interface VPC endpoint for Amazon SQS for this architecture. Client services must be able to access the endpoint service from on premises and from multiple VPCs within the company's AWS infrastructure.

Which combination of steps should the network engineer take to ensure that the client applications can resolve DNS for the interface endpoint? (Choose three.)

  1. Create the interface endpoint for Amazon SQS with the option for private DNS names turned on.
  2. Create the interface endpoint for Amazon SQS with the option for private DNS names turned off.
  3. Manually create a private hosted zone for sqs.us-east-1.amazonaws.com. Add necessary records that point to the interface endpoint. Associate the private hosted zones with other VPCs.
  4. Use the automatically created private hosted zone for sqs.us-east-1.amazonaws.com with previously created necessary records that point to the interface endpoint. Associate the private hosted zones with other VPCs.
  5. Access the SQS endpoint by using the public DNS name sqs.us-east-1 amazonaws.com in VPCs and on premises.
  6. Access the SQS endpoint by using the private DNS name of the interface endpoint <VPC Endpoint DNS name>.sqs.us-east-1.vpce.amazonaws.com in VPCs and on premises.

Answer(s): B,C,F



A company's network engineer builds and tests network designs for VPCs in a development account. The company needs to monitor the changes that are made to network resources and must ensure strict compliance with network security policies. The company also needs access to the historical configurations of network resources.

Which solution will meet these requirements?

  1. Create an Amazon EventBridge (Amazon CloudWatch Events) rule with a custom pattern to monitor the account for changes. Configure the rule to invoke an AWS Lambda function to identify noncompliant resources. Update an Amazon DynamoDB table with the changes that are identified.
  2. Create custom metrics from Amazon CloudWatch logs. Use the metrics to invoke an AWS Lambda function to identify noncompliant resources. Update an Amazon DynamoDB table with the changes that are identified.
  3. Record the current state of network resources by using AWS Config. Create rules that reflect the desired
    configuration settings. Set remediation for noncompliant resources.
  4. Record the current state of network resources by using AWS Systems Manager Inventory. Use Systems Manager State Manager to enforce the desired configuration settings and to carry out remediation for noncompliant resources.

Answer(s): C



  PDF
Viewing page 11 of 38
Viewing questions 81 - 88 out of 296 questions


Post your Comments and Discuss Amazon AWS Certified Advanced Networking - Specialty ANS-C01 exam prep with other Community members:

AI Tutor AI Tutor 👋 I’m here to help!