support@Free-Braindumps.com
Register Login
Cisco
CompTIA
ISC
EC-Council
EXIN
Fortinet
ITIL
Juniper
Microsoft
VMware
Avaya
SAP
Google
NVIDIA
Salesforce
Amazon
Palo Alto Networks
ISC2
Splunk
ServiceNow
All Vendors
  1. Home
  2. Exams
  3. Amazon
  4. AWS Certified Advanced Networking - Specialty ANS-C01

Amazon AWS Certified Advanced Networking - Specialty ANS-C01 Exam Actual Questions
AWS Certified Advanced Networking - Specialty ANS-C01 (Page 4 )

Updated On: 6-Jul-2026
Page 4 of 38
PDF with 296 Questions

An international company provides early warning about tsunamis. The company plans to use IoT devices to

monitor sea waves around the world. The data that is collected by the IoT devices must reach the company's infrastructure on AWS as quickly as possible. The company is using three operation centers around the world. Each operation center is connected to AWS through its own AWS Direct Connect connection. Each operation center is connected to the internet through at least two upstream internet service providers.

The company has its own provider-independent (PI) address space. The IoT devices use TCP protocols for reliable transmission of the data they collect. The IoT devices have both landline and mobile internet connectivity. The infrastructure and the solution will be deployed in multiple AWS Regions. The company will use Amazon Route 53 for DNS services.

A network engineer needs to design connectivity between the IoT devices and the services that run in the AWS Cloud.

Which solution will meet these requirements with the HIGHEST availability?

  1. Set up an Amazon CloudFront distribution with origin failover. Create an origin group for each Region where the solution is deployed.
  2. Set up Route 53 latency-based routing. Add latency alias records. For the latency alias records, set the value of Evaluate Target Health to Yes.
  3. Set up an accelerator in AWS Global Accelerator. Configure Regional endpoint groups and health checks.
  4. Set up Bring Your Own IP (BYOIP) addresses. Use the same PI addresses for each Region where the solution is deployed.

Answer(s): A



A company is planning a migration of its critical workloads from an on-premises data center to Amazon EC2 instances. The plan includes a new 10 Gbps AWS Direct Connect dedicated connection from the on-premises data center to a VPC that is attached to a transit gateway. The migration must occur over encrypted paths between the on-premises data center and the AWS Cloud.

Which solution will meet these requirements while providing the HIGHEST throughput?

  1. Configure a public VIF on the Direct Connect connection. Configure an AWS Site-to-Site VPN connection to the transit gateway as a VPN attachment.
  2. Configure a transit VIF on the Direct Connect connection. Configure an IPsec VPN connection to an EC2 instance that is running third-party VPN software.
  3. Configure MACsec for the Direct Connect connection. Configure a transit VIF to a Direct Connect gateway that is associated with the transit gateway.
  4. Configure a public VIF on the Direct Connect connection. Configure two AWS Site-to-Site VPN connections to the transit gateway. Enable equal-cost multi-path (ECMP) routing.

Answer(s): C



A network engineer must develop an AWS CloudFormation template that can create a virtual private gateway, a customer gateway, a VPN connection, and static routes in a route table. During testing of the template, the network engineer notes that the CloudFormation template has encountered an error and is rolling back.

What should the network engineer do to resolve the error?

  1. Change the order of resource creation in the CloudFormation template.
  2. Add the DependsOn attribute to the resource declaration for the virtual private gateway. Specify the route table entry resource.
  3. Add a wait condition in the template to wait for the creation of the virtual private gateway.
  4. Add the DependsOn attribute to the resource declaration for the route table entry. Specify the virtual private gateway resource.

Answer(s): D



A company operates its IT services through a multi-site hybrid infrastructure. The company deploys resources on AWS in the us-east-1 Region and in the eu-west-2 Region. The company also deploys resources in its own data centers that are located in the United States (US) and in the United Kingdom (UK). In both AWS Regions, the company uses a transit gateway to connect 15 VPCs to each other. The company has created a transit gateway peering connection between the two transit gateways. The VPC CIDR blocks do not overlap with each other or with IP addresses used within the data centers. The VPC CIDR prefixes can also be aggregated either on a Regional level or for the company's entire AWS environment.

The data centers are connected to each other by a private WAN connection. IP routing information is exchanged dynamically through Interior BGP (iBGP) sessions. The data centers maintain connectivity to AWS through one AWS Direct Connect connection in the US and one Direct Connect connection in the UK. Each Direct Connect connection is terminated on a Direct Connect gateway and is associated with a local transit gateway through a transit VIF.

Traffic follows the shortest geographical path from source to destination. For example, packets from the UK data center that are targeted to resources in eu-west-2 travel across the local Direct Connect connection. In cases of cross-Region data transfers, such as from the UK data center to VPCs in us-east-1, the private WAN connection must be used to minimize costs on AWS. A network engineer has configured each transit gateway association on the Direct Connect gateway to advertise VPC-specific CIDR IP prefixes only from the local Region. The routes toward the other Region must be learned through BGP from the routers in the other data center in the original, non-aggregated form.

The company recently experienced a problem with cross-Region data transfers because of issues with its private WAN connection. The network engineer needs to modify the routing setup to prevent similar interruptions in the future. The solution cannot modify the original traffic routing goal when the network is operating normally.

Which modifications will meet these requirements? (Choose two.)

  1. Remove all the VPC CIDR prefixes from the list of subnets advertised through the local Direct Connect connection. Add the company's entire AWS environment aggregate route to the list of subnets advertised through the local Direct Connect connection.
  2. Add the CIDR prefixes from the other Region VPCs and the local VPC CIDR blocks to the list of subnets advertised through the local Direct Connect connection. Configure data center routers to make routing decisions based on the BGP communities received.
  3. Add the aggregate IP prefix for the other Region and the local VPC CIDR blocks to the list of subnets advertised through the local Direct Connect connection.
  4. Add the aggregate IP prefix for the company's entire AWS environment and the local VPC CIDR blocks to the list of subnets advertised through the local Direct Connect connection.
  5. Remove all the VPC CIDR prefixes from the list of subnets advertised through the local Direct Connect connection. Add both Regional aggregate IP prefixes to the list of subnets advertised through the Direct Connect connection on both sides of the network. Configure data center routers to make routing decisions based on the BGP communities received.

Answer(s): C,E



A company's network engineer needs to design a new solution to help troubleshoot and detect network anomalies. The network engineer has configured Traffic Mirroring. However, the mirrored traffic is overwhelming the Amazon EC2 instance that is the traffic mirror target. The EC2 instance hosts tools that the company's security team uses to analyze the traffic. The network engineer needs to design a highly available solution that can scale to meet the demand of the mirrored traffic.

Which solution will meet these requirements?

  1. Deploy a Network Load Balancer (NLB) as the traffic mirror target. Behind the NLB, deploy a fleet of EC2 instances in an Auto Scaling group. Use Traffic Mirroring as necessary.
  2. Deploy an Application Load Balancer (ALB) as the traffic mirror target. Behind the ALB, deploy a fleet of EC2 instances in an Auto Scaling group. Use Traffic Mirroring only during non-business hours.
  3. Deploy a Gateway Load Balancer (GLB) as the traffic mirror target. Behind the GLB, deploy a fleet of EC2 instances in an Auto Scaling group. Use Traffic Mirroring as necessary.
  4. Deploy an Application Load Balancer (ALB) with an HTTPS listener as the traffic mirror target. Behind the ALB, deploy a fleet of EC2 instances in an Auto Scaling group. Use Traffic Mirroring only during active events or business hours.

Answer(s): A



A company uses a hybrid architecture and has an AWS Direct Connect connection between its on-premises data center and AWS. The company has production applications that run in the on-premises data center. The company also has production applications that run in a VPC. The applications that run in the on-premises data center need to communicate with the applications that run in the VPC. The company is using corp.example.com as the domain name for the on-premises resources and is using an Amazon Route 53 private hosted zone for aws.example.com to host the VPC resources.

The company is using an open-source recursive DNS resolver in a VPC subnet and is using a DNS resolver in the on-premises data center. The company's on-premises DNS resolver has a forwarder that directs requests for the aws.example.com domain name to the DNS resolver in the VPC. The DNS resolver in the VPC has a forwarder that directs requests for the corp.example.com domain name to the DNS resolver in the on-premises data center. The company has deckled to replace the open-source recursive DNS resolver with Amazon Route 53 Resolver endpoints.

Which combination of steps should a network engineer take to make this replacement? (Choose three.)

  1. Create a Route 53 Resolver rule to forward aws.example.com domain queries to the IP addresses of the outbound endpoint.
  2. Configure the on-premises DNS resolver to forward aws.example.com domain queries to the IP addresses of the inbound endpoint.
  3. Create a Route 53 Resolver inbound endpoint and a Route 53 Resolver outbound endpoint.
  4. Create a Route 53 Resolver rule to forward aws.example.com domain queries to the IP addresses of the inbound endpoint.
  5. Create a Route 53 Resolver rule to forward corp.example.com domain queries to the IP address of the on- premises DNS resolver.
  6. Configure the on-premises DNS resolver to forward aws.example.com queries to the IP addresses of the outbound endpoint.

Answer(s): B,C,E



A government contractor is designing a multi-account environment with multiple VPCs for a customer. A network security policy requires all traffic between any two VPCs to be transparently inspected by a third-party appliance.

The customer wants a solution that features AWS Transit Gateway. The setup must be highly available across multiple Availability Zones, and the solution needs to support automated failover. Furthermore, asymmetric routing is not supported by the inspection appliances.

Which combination of steps is part of a solution that meets these requirements? (Choose two.)

  1. Deploy two clusters that consist of multiple appliances across multiple Availability Zones in a designated inspection VPC. Connect the inspection VPC to the transit gateway by using a VPC attachment. Create a target group, and register the appliances with the target group. Create a Network Load Balancer (NLB), and set it up to forward to the newly created target group. Configure a default route in the inspection VPCs transit gateway subnet toward the NLB.
  2. Deploy two clusters that consist of multiple appliances across multiple Availability Zones in a designated inspection VPC. Connect the inspection VPC to the transit gateway by using a VPC attachment. Create a target group, and register the appliances with the target group. Create a Gateway Load Balancer, and set it up to forward to the newly created target group. Configure a default route in the inspection VPC's transit gateway subnet toward the Gateway Load Balancer endpoint.
  3. Configure two route tables on the transit gateway. Associate one route table with all the attachments of the application VPCs. Associate the other route table with the inspection VPC's attachment. Propagate all VPC attachments into the inspection route table. Define a static default route in the application route table.
    Enable appliance mode on the attachment that connects the inspection VP
  4. Configure two route tables on the transit gateway. Associate one route table with all the attachments of the application VPCs. Associate the other route table with the inspection VPCs attachment. Propagate all VPC attachments into the application route table. Define a static default route in the inspection route table.
    Enable appliance mode on the attachment that connects the inspection VPC.
  5. Configure one route table on the transit gateway. Associate the route table with all the VPCs. Propagate all VPC attachments into the route table. Define a static default route in the route table.

Answer(s): B,C



A company has deployed Amazon EC2 instances in private subnets in a VPC. The EC2 instances must initiate any requests that leave the VPC, including requests to the company's on-premises data center over an AWS Direct Connect connection. No resources outside the VPC can be allowed to open communications directly to the EC2 instances.

The on-premises data center's customer gateway is configured with a stateful firewall device that filters for incoming and outgoing requests to and from multiple VPCs. In addition, the company wants to use a single IP match rule to allow all the communications from the EC2 instances to its data center from a single IP address.

Which solution will meet these requirements with the LEAST amount of operational overhead?

  1. Create a VPN connection over the Direct Connect connection by using the on-premises firewall. Use the firewall to block all traffic from on premises to AWS. Allow a stateful connection from the EC2 instances to initiate the requests.
  2. Configure the on-premises firewall to filter all requests from the on-premises network to the EC2 instances.

    Allow a stateful connection if the EC2 instances in the VPC initiate the traffic.
  3. Deploy a NAT gateway into a private subnet in the VPC where the EC2 instances are deployed. Specify the NAT gateway type as private. Configure the on-premises firewall to allow connections from the IP address that is assigned to the NAT gateway.
  4. Deploy a NAT instance into a private subnet in the VPC where the EC2 instances are deployed. Configure the on-premises firewall to allow connections from the IP address that is assigned to the NAT instance.

Answer(s): C



  PDF
Viewing page 4 of 38
Viewing questions 25 - 32 out of 296 questions


Post your Comments and Discuss Amazon AWS Certified Advanced Networking - Specialty ANS-C01 exam prep with other Community members:

AI Tutor AI Tutor 👋 I’m here to help!