Amazon AWS Certified Developer Associate Exam Prep
AWS Certified Developer - Associate DVA-C02 (Page 3 )

• Correct answer: B: Use a function alias with different versions.

• AWS Lambda versions are immutable. You publish a version for each code change.
• An alias is a movable pointer to a specific version (e.g., prod ? version 5).
• Deploying a new version is just publishing another version; directing production traffic to the new version is as simple as updating the alias.
• If you need to roll back, you re-point the alias to the previous version. This is minimal operational effort and avoids rebuilding pipelines or managing multiple deployment artifacts at runtime.

• A (blue/green with OpsWorks) adds complexity and tooling overhead.
• C (saving old deployment packages in S3) doesn’t provide runtime switching or instant rollback.
• D (CodePipeline) adds orchestration overhead; while useful, it’s more setup than the alias approach for simple rollback needs.

• Correct answers: IntegrationLatency and Latency.

• Why:

• Why not CacheHitCount/CacheMissCount: those relate to API Gateway caching. If you’re not using caching (or the problem isn’t caching-related), they won’t help diagnose a timeout.

• Practical tip: in CloudWatch, compare Latency and IntegrationLatency for the failing method/resource. If Latency is high but IntegrationLatency is low, the delay is outside the Lambda integration (gateway/network). If IntegrationLatency is high, the Lambda/backend is the bottleneck. Also review CloudWatch Logs for API Gateway and Lambda for additional clues.

• Data Category Groups e categorias;
• Visibilidade dessas categorias para perfis ou permission sets.

• B e C: regras de compartilhamento não são o mecanismo apropriado para restringir resultados de busca do Knowledge por divisão.
• D: a role hierarchy não é o mecanismo principal para controlar a visibilidade de categorias do Knowledge. Além disso, a configuração correta é atribuir visibilidade a perfis ou permission sets.

• Link-local — FE80::/10; valid only on the local link/subnet and not routed by routers.
• Multicast — FF00::/8; identifies a group of interfaces rather than a private address range.
• Global unicast — 2000::/3; publicly routable IPv6 addressing.

• An active relationship is used automatically when filters are evaluated. An inactive relationship does not propagate filters unless explicitly activated in DAX, so it would not reliably enforce the required security behavior.
• Apply security filter in both directions allows RLS filters to propagate across the relationship in both directions. This ensures that bidirectional filtering respects the RLS rules applied to both tables.
• Assume referential integrity is unrelated to RLS. It is mainly a DirectQuery optimization that allows Power BI to use an inner join when matching keys are guaranteed to exist.
• The relationship must therefore be active, with security filtering enabled in both directions.

• Case Assignment Rules normalmente são avaliadas quando o caso é criado. Elas podem ser executadas novamente em uma edição somente se o usuário marcar “Assign using active assignment rules”; isso não acontece automaticamente apenas porque o caso foi fechado.
• Portanto, criar uma regra de atribuição não corrige os centenas de casos já fechados e não garante, por si só, que um caso será transferido antes de ser fechado.

• B — Usar uma ferramenta de dados: corrige os registros históricos já existentes, atualizando o Owner.
• D — Criar uma regra de validação: impede que um caso seja fechado enquanto ainda pertence a uma fila. Exemplo conceitual: se Status = Closed e o proprietário for uma fila, bloquear o salvamento.

• A. IDS attack signatures: An IDS primarily detects suspicious network activity; it is not the best control for scanning uploaded documents for malware.
• C. Load balancer: Distributes traffic among servers and improves availability, but does not inspect files for malware.
• D. WAF: Protects web applications against attacks such as SQL injection and command injection. It may help secure the upload function, but malware scanning is the key requirement here.

• STP elects the switch with the lowest Bridge ID as the root bridge.
• The Bridge ID consists mainly of bridge priority + MAC address.
• If multiple switches have the same priority, the switch with the lower MAC address is preferred.
• STP bridge priority values are configured in increments of 4096, such as 0, 4096, 8192, and so on. 32768 is the standard default value.

• Process Builder: Automates actions based on record changes; it does not create interactive user forms.
• Approval Process: Routes records for approval and captures approval decisions.
• Outbound Message: Sends information to an external system; it does not provide a user interface.

• Scanning is not essential during a power outage.
• A scanner can consume UPS battery power without helping the user save cloud documents or shut down safely.
• The UPS should be reserved for the computer, monitor, and necessary network equipment.
• The surge protector helps protect the scanner from voltage spikes, but it will not keep it running during an outage.

• AWS Network Firewall can inspect and block traffic across a VPC when traffic is routed through the firewall. A Drop action rule can deny traffic from the suspicious source IP.
• GuardDuty findings are sent to Security Hub.
• A Lambda function can be invoked when Security Hub receives a new GuardDuty finding, extract the source IP, and update the Network Firewall policy with a blocking rule.

• GuardDuty threat lists: Used to identify or increase the severity of findings; they do not directly block VPC traffic.
• AWS WAF: Protects supported web applications, such as CloudFront or Application Load Balancers. It does not provide general VPC-wide traffic blocking.
• GuardDuty suppression rules: Suppress or hide findings. They do not block the suspicious traffic.

• D — Value analysis: Correct. It examines an existing product to identify ways of reducing its cost while still providing the required functions, quality and reliability.
• E — Kaizen costing: Correct. It involves making continuous, small improvements and cost reductions while the product is already in production.

• Functional analysis: It is not limited to minimizing the cost of the originally defined functions. It examines what functions are required and how they can be provided at the lowest overall cost.
• Value engineering: Usually applies to the design and development of a new product, rather than being a fundamental redesign of existing organisational processes. That description is closer to business process re-engineering.
• Target costing: The target cost is generally established during the product development stage, before production begins. It is not continuously reset while the product is in production.

• FTP — Transfers files using a client/server model and supports authentication. It uses separate control and data connections.
• TFTP — A very simple file-transfer protocol with no authentication and minimal features. Commonly used to transfer router or switch configuration files and IOS images.
• SCP — Securely copies files over SSH. It provides encryption and authentication.
• SFTP — Also transfers files securely through SSH, but provides more file-management capabilities than traditional SCP.
• HTTP/HTTPS — Primarily web protocols, but can also download files; HTTPS encrypts the session.

• TFTP = simple, unauthenticated file transfer
• FTP = file transfer with authentication, but not inherently encrypted
• SCP/SFTP = secure file transfer using SSH

• Disabling a compromised account
• Blocking a malicious IP address
• Isolating an endpoint
• Creating or escalating an incident ticket

• Virus signatures: Primarily associated with antivirus or endpoint protection.
• Security agent deployment: Usually handled by endpoint-management or security-agent platforms.
• Vulnerability scanning: Typically performed by vulnerability-management tools.

• A — Capacity: The system must handle all current records and anticipated future records. A system that cannot cope with volume will quickly become ineffective.
• C — Accuracy: Academic records are critical, so the new system must be at least as accurate as the existing system and comparable systems. Poor accuracy could cause serious administrative and reputational problems.
• D — Integration: Linking with the university’s financial systems supports consistency and avoids duplicate data entry, especially for registration, deregistration and fee-related transactions.

• B — Parallel running: This is a useful implementation and risk-control technique, but it is not an essential feature of the system itself. It may also be expensive and time-consuming.
• E — Internet access for all information: This creates significant confidentiality and security risks. External access might be needed for selected services, but unrestricted access to all information is not essential and would be inappropriate for student records.

• Confirming the data has the required columns and data types
• Handling missing or duplicate records
• Converting data into a suitable format
• Selecting or engineering useful features
• Splitting it into training, validation, and test sets

1. Prepare the training data
2. Select an algorithm or configure AutoML
3. Train the model
4. Evaluate its performance
5. Tune hyperparameters if needed
6. Deploy the model

• A — .gitignore: Controls Git tracking; it does not configure Copilot exclusions.
• B — copilot.ignore: This is not the standard GitHub Copilot Business exclusion mechanism.
• D — Renaming files: Adding _no_copilot has no recognized effect.

• File is shared externally ? Access level

• File is labeled “Internal only” ? Sensitivity label

• desktopwidth:i:1280
• desktopheight:i:1024

• Connection information: Controls connection-related settings, not the desktop resolution.
• Scaling plan: Controls when session hosts start, stop, or scale based on demand.
• Session behaviour: Controls behavior such as disconnect or logoff handling.
• Display settings: Specifically controls RDP display properties, making it the appropriate choice.

• A — Consumption-based pricing: AWS generally uses a pay-as-you-go model. You pay for the resources you consume rather than purchasing hardware upfront or paying for unused capacity.
• C — Economies of scale: AWS purchases and operates infrastructure at a very large scale, allowing it to reduce costs and pass some savings to customers through lower service prices.

• Perpetual licenses: These involve paying once for permanent software ownership and are not a primary AWS Cloud economic benefit.
• AWS Enterprise Support at no additional cost: Enterprise Support has an additional charge.
• Bring-your-own-hardware model: AWS provides and manages the underlying cloud infrastructure; customers do not normally bring their own physical servers.

• B — Both inner and outer classes can be declared as with sharing.

• C — Inner classes do not inherit sharing settings from the container class.

apex 
public with sharing class OuterClass { 
    public with sharing class InnerClass { 
        // Explicitly uses sharing rules 
    } 
}

• Compute: Not used; no virtual warehouse is required.
• Data Storage: Not scanned again.
• Metadata: May help Snowflake manage and validate cached results, but it is not the Snowflake architectural layer identified as serving the request.
• Cloud Services: Handles query coordination, metadata services, authentication, and result-cache access.

• Install unauthorized or unsupported software
• Access features blocked by the manufacturer or operating system
• Customize system behavior beyond normal settings

• Admin access to the deployment pipeline
• Contributor access to the Development and Test workspaces
• Viewer access to the Production workspace

• Behavioral and anomaly detection
• Threat intelligence integration
• User and entity behavior analytics
• Automated response actions, often through SOAR integration

• Virus signatures: Associated primarily with antivirus or endpoint protection.
• Security agent deployment: Usually an endpoint-management or EDR function.
• Vulnerability scanning: Typically performed by vulnerability-management tools, though a SIEM may integrate their results.

• Label applied does not automatically exclude a file from Copilot.
• Encryption/usage rights determine whether Copilot can access the file’s content.
• If the user has no permission under Label2, File3 should be unavailable to Copilot for that user.
• File3’s label might be inherited by derived content only if File3 was actually processed and contributed by an authorized user; it should not be treated as contributing merely because it exists in the source set.

• A. Adjust resolution: Incorrect because an incompatible resolution usually causes no display, distortion, or an unsupported-mode message—not intermittent flickering.
• B. Swap the HDMI cable: Correct. Replacing the common, easily tested component is the appropriate troubleshooting step.
• C. Replace the projector: Incorrect because the issue also occurs with a monitor.
• D. Configure refresh rate: A mismatched refresh rate can cause visual problems, but the repeated flicker across displays points more strongly to the cable.

• Which batches and markets are affected
• Whether the deficiency affects product quality, efficacy, or patient safety
• Whether the issue is an ongoing manufacturing problem
• Whether immediate containment or distribution suspension is needed

• A — Withdraw the product: may be necessary, but is premature before assessing the risk.
• B — “Dear Dr.” letter: may be appropriate later, depending on the risk.
• C — Notify global authorities: may become mandatory, but the scope and urgency depend on the assessment.

• Customer needs: Primary focus in agile; guides prioritization and decision-making.
• Organization’s needs: Important constraints, but processes should be tailored when they create waste.
• Agile lead/project manager: Their role is to facilitate value delivery, not prioritize their own preferences.

• A — Improved management of storage space: Correct.

• B — Improved supplier relationships: Correct.

• C — Improved pricing decisions: Correct.

• D — Non-product-specific costs must be apportioned: Incorrect.

• E — Profitability of each customer group: Incorrect.

• B — AWS DataSync: Transfers data between storage systems. It is not a marketplace or integration service for third-party datasets.
• C — Kinesis Data Streams and CodeCommit: CodeCommit stores source code, not third-party analytical datasets. Kinesis is for streaming data, not retrieving datasets from repositories.
• D — Kinesis Data Streams and ECR: Amazon ECR stores container images, not third-party datasets.

• Repetitive and time-consuming
• Based on measurable conditions, such as last check-in time
• Easy to automate with alerts, dashboards, or scheduled reports
• Important for ensuring scan coverage

• Assigning custom recommendations usually requires analyst judgment and context.
• Analyzing false positives can sometimes be assisted by automation, but validation often requires human review.
• Rendering an additional executive report increases reporting activity rather than reducing a core operational workload.

• B: Não é preciso implantar o modelo em um endpoint do Amazon SageMaker, pois o Bedrock já oferece a infraestrutura de inferência.
• C: O SageMaker Model Registry é usado para gerenciar modelos no SageMaker, não é requisito para modelos customizados no Bedrock.
• D: Não existe uma etapa geral de “conceder acesso” ao modelo customizado como requisito principal de uso. O ponto essencial é adquirir o Provisioned Throughput.

• Each team’s Bedrock workflow uses a separate IAM service role.
• The role’s Amazon S3 permissions can be limited to only that team’s customer folder or objects.
• This enforces least privilege and prevents one team’s Bedrock application from accessing another team’s data.
• Access is enforced by AWS permissions, not by asking users to provide a customer name in each request.

• A single role with broad S3 access does not provide team-level isolation.
• Asking teams to specify a customer name is not an access-control mechanism.
• Redacting data does not prevent unauthorized access.
• A bucket policy alone is insufficient unless it explicitly enforces the required team-role restrictions.

• Domain controllers, because the requirement specifically excludes them. However, note that both member servers and domain controllers run Windows Server, so OS targeting alone cannot distinguish them unless the targeting option allows selecting the relevant server role/version. In the usual exam interpretation, target the applicable server OS category.
• Client computers, because they run a client Windows operating system.

• Domain: Targets membership in a domain, not the computer’s operating-system type.
• Security Group: Would require creating and maintaining a group containing all member servers, increasing administrative effort.
• Environment Variable: Not designed to reliably identify member servers.

• Advanced Persistent Threat (APT): A sustained, targeted attack campaign or attacker group—not a vulnerability.
• Trojan: Malware disguised as legitimate software.
• Stealthware: A general term for malware designed to avoid detection; it does not specifically mean an unknown vulnerability.

• CSIRT: A Computer Security Incident Response Team that handles and coordinates incident response.
• CVSS: A scoring system used to rate the severity of vulnerabilities.
• SOAR: Security Orchestration, Automation, and Response technology used to automate security workflows.

1. Clear principles and boundaries — Employees have freedom, but decisions must remain within clear organizational values, policies and limits.
2. High degree of freedom — Managers are trusted to make decisions rather than seeking continual approval from senior management.
3. Frontline customer responsibility — Customer-facing managers should be empowered to manage customer relationships and respond quickly to needs.
4. Transparent and ethical information — Information should be openly available and used honestly, supporting trust and informed decision-making.

• 2018-12-31 — the date
• 08:59 — the time

• Changing the original column to Date may fail because it still contains the text at and a time.
• Extracting the last 11 characters does not isolate the date.
• Extracting the first 11 characters gets the date plus a space, but the option does not specify changing the result to the Date type.

• COE: Identifies the Center of Excellence, such as Payroll or Benefits.
• Topic Detail: Classifies the HR service within its COE; it does not identify the catalog item.
• Template: Supplies default values or case configuration.
• Record Producer: Represents the catalog item that employees use to submit the request and create the case.

• Due diligence: Researching and evaluating a third party before entering or continuing a business relationship.
• Internal audit: Evaluates controls within the organization itself.
• Penetration testing: Actively tests systems for exploitable vulnerabilities.
• Attestation: A formal statement or report—such as a SOC 2 report—provided by an independent party about an organization’s controls.

• True positive: The scan reports a vulnerability that really exists.
• False positive: The scan reports a vulnerability that does not exist.
• True negative: The scan correctly reports no vulnerability.
• False negative: The scan fails to detect a vulnerability that is actually present.

• Instant messaging/chat: Can be abused to send malicious links or attachments, but P2P file sharing is the more direct high-risk source.
• E-mail: A common malware delivery method, but this question specifically emphasizes an application type associated with direct file exchange.
• End-to-end applications: This describes communication protection or architecture, not a specific application category known for malware distribution.

1. Yes — Microsoft Foundry provides a secure, governed environment for building and managing generative AI applications and agents. It brings together models, data, tools, evaluation, deployment, and monitoring.

1. Yes — Foundry is designed for enterprise workloads and supports scaling AI applications as usage grows. Scalability comes from the underlying Azure services and managed infrastructure.

1. Yes — Foundry can be used in solutions involving image recognition and computer vision. Applications can use vision-capable models and Azure AI vision capabilities for tasks such as image analysis, object detection, and OCR.

• Labels control access and protection, not blanket exclusion.
• If the user has permission to open a labeled file—especially if the label allows authenticated users to view it—Copilot can use that file in a summary.
• If the label applies encryption and the user lacks the required usage rights, Copilot should not use the file or reveal its contents.
• Copilot honors the user’s existing permissions, so it should not expose labeled content to an unauthorized user.

CIMA P3 topics

• IT governance and systems strategy
• Systems development and implementation
• Change and project governance
• Strategic and business risk

• A — Plan for new systems: The committee should help identify and prioritise systems requirements and ensure planned systems support organisational needs.
• D — Consider competitive issues: New information systems may affect Y’s competitive position, service quality and efficiency. These strategic implications should be considered.
• E — Ensure the system meets company goals: This is a key governance responsibility. The committee should ensure the project remains aligned with Y’s objectives and delivers business value.

• B — Develop new systems: Detailed system development should be performed by IT specialists and project teams, not the steering committee.
• C — Manage the project: The project manager should handle day-to-day project management. The steering committee should provide oversight, challenge and key decisions, rather than manage daily activities.

• MTTC: Time required to contain or limit the incident’s impact — best match.
• MTTR: Time required to remediate or recover from the incident; this may include eradication, restoration, and cleanup, which goes beyond merely stopping spread.
• MTTD: How long it takes to discover the incident.
• MTBF: Average time between failures, generally a reliability metric.

• Malware or malicious software
• Command-and-control tools
• Internet surveillance and intrusion software

• ITAR: A U.S. regulation controlling defense-related articles and services; it is not the international arrangement described.
• Palermo Convention: Focuses on transnational organized crime and related protocols, not export controls for cyber weapons.
• GDPR: European data-protection and privacy legislation.

• BCP (Business Continuity Plan): è più ampio e mira a mantenere le funzioni essenziali dell’organizzazione durante un’interruzione. Il DRP è una componente più specifica del BCP.
• Communication plan: stabilisce come comunicare con dipendenti, cittadini e altre parti interessate, ma non ripristina i sistemi.
• IRP (Incident Response Plan): gestisce la risposta iniziale a un incidente di sicurezza, come un attacco informatico, non principalmente il recupero da un disastro fisico.