APSE CESP Exam Prep
Certified Employment Support Professional (Page 3 )

• Compare each server’s drive specifications and performance data.
• Identify the drive that is faulty, slow, or mismatched.
• Replace it with a drive that matches the required interface, capacity, and performance characteristics.
• Avoid selecting a slower drive, because storage performance can bottleneck the entire server.
• In a redundant array, use a compatible replacement so rebuilding does not create unnecessary performance degradation.

• Digitally signing the software: Verifies authenticity and integrity. It does not hide how the software works.
• Limiting third-party libraries: May reduce dependencies and attack surface, but does not directly prevent reverse engineering.
• Using compile flags: Some compiler options can remove debugging information or optimize code, which may provide limited protection, but this is not the primary technique identified for preventing reverse engineering.

• The requirement is an assessment of the Azure environment’s design, which requires a support plan offering proactive architectural guidance.
• Premier support would provide this capability, but it is a high-cost option.
• Since the requirement says to minimize expenses, Premier is not the best recommendation.
• A lower-cost plan with the required advisory/design-review capability—historically Professional Direct in Azure’s support-plan model—would be more appropriate.

• Two-part tariff pricing: $10 per unit
• Dual pricing: $20 per unit

Two-part tariff pricing

Dual pricing

• Division X, the seller, is credited with the market price: \(\$20\)
• Division Y, the buyer, is charged the marginal cost: \(\$10\)

• CCTV system — Detective control: Cameras monitor and record activity, helping identify or investigate security incidents after—or while—they occur.
• Signs about being filmed — Deterrent control: The signs discourage people from attempting unauthorized or criminal activity because they know surveillance is present.

• Preventive: Stops an incident from occurring, such as a lock or access-control system.
• Corrective: Restores systems after an incident.
• Directive: Instructs people to behave in a certain way, such as a security policy.
• Compensating: Provides an alternative control when the preferred control cannot be implemented.

• Employees can work from any location, including remote sites and offices worldwide.
• Login can be relatively seamless after the device is registered.
• It does not require distributing additional physical authentication equipment.

• Geotagging: Identifies location, but location alone is not a strong authentication method and may prevent legitimate remote access.
• Smart cards: Provide strong authentication but require card readers and physical cards, increasing equipment and management requirements.
• Time-based logins: Typically involve one-time codes that users must enter, making the experience less seamless and potentially requiring a token or authenticator app.

• Espionage: Stealing information for intelligence or competitive purposes.
• Data exfiltration: Unauthorized removal or transfer of data.
• Nation-state attack: A sophisticated attack sponsored by a government.
• Shadow IT: Unapproved technology or access methods used by employees.

• Link-local — FE80::/10; valid only on the local link/subnet and not routed by routers.
• Multicast — FF00::/8; identifies a group of interfaces rather than a private address range.
• Global unicast — 2000::/3; publicly routable IPv6 addressing.

apex 
for (Account updatedAccount : Trigger.new) { 
    AccountTriggerHelper.notinyxternalSystem(updatedAccount.Id); 
}

• Too many callouts: The callout occurs asynchronously in the future method, and each future transaction can perform its permitted callouts.
• Too many SOQL queries: The SOQL query is inside the future execution, not repeatedly in the trigger transaction.
• Callout from triggers not supported: Direct callouts from triggers are prohibited, but the trigger delegates the callout to asynchronous Apex, which is the correct pattern.

1. Product + ProductSubCategory: Inner join

1. Result + ProductCategory: Left outer join

sql 
ALTER TABLE dbo.DimCustomer 
ADD CONSTRAINT PK_DimCustomer 
PRIMARY KEY NONCLUSTERED (CustomerKey) 
NOT ENFORCED;

1. ALTER TABLE dbo.DimCustomer
2. ADD CONSTRAINT PK_DimCustomer PRIMARY KEY NONCLUSTERED (CustomerKey)
3. NOT ENFORCED

• desktopwidth:i:1280
• desktopheight:i:1024

• Connection information: Controls connection-related settings, not the desktop resolution.
• Scaling plan: Controls when session hosts start, stop, or scale based on demand.
• Session behaviour: Controls behavior such as disconnect or logoff handling.
• Display settings: Specifically controls RDP display properties, making it the appropriate choice.

• Accept: Acknowledges the risk without taking additional action.
• Transfer: Shifts the risk or financial impact to another party, such as an insurer.
• Mitigate: Reduces the likelihood or impact through controls like patching, MFA, or segmentation.
• Avoid: Eliminates the activity that creates the risk.

• Azure Machine Learning is the overall Azure service.
• Machine Learning designer is the visual, drag-and-drop interface within Azure Machine Learning.
• Microsoft may refer to the broader product as Azure Machine Learning studio, while “Designer” remains the specific visual workflow tool.

• Azure Logic Apps: Workflow and integration automation.
• Azure Batch: Large-scale parallel or batch compute.
• Azure Cosmos DB: Globally distributed NoSQL database.

• T?o m?t Systems Manager Automation runbook d? ch?y l?nh kh?i d?ng l?i ?ng d?ng trên các EC2 instance.
• T?o m?t Amazon EventBridge rule ph?n ?ng khi CloudWatch alarm chuy?n sang tr?ng thái ALARM.
• Ð?t Automation runbook làm target c?a EventBridge rule.

1. Log c?a ?ng d?ng du?c ghi vào CloudWatch Logs.
2. CloudWatch alarm phát hi?n nhi?u l?i liên quan d?n vi?c restart.
3. Alarm chuy?n sang tr?ng thái ALARM.
4. EventBridge nh?n s? ki?n thay d?i tr?ng thái này.
5. EventBridge g?i Systems Manager Automation runbook.
6. Runbook restart ?ng d?ng trên các EC2 instance, không restart c? instance.

• A: SNS không tr?c ti?p g?i Systems Manager Automation runbook nhu m?t target native.
• B: Lambda có th? th?c hi?n vi?c restart, nhung ph?i t? x? lý vi?c xác d?nh instance và ch?y l?nh t? xa.
• C: Lambda ch? làm trung gian d? g?i runbook, không c?n thi?t vì EventBridge có th? g?i runbook tr?c ti?p.

• Keep earlier prompt versions.
• Identify the last version that produced acceptable output.
• Restore it as a baseline.
• Make small, controlled changes—ideally one significant change at a time.
• Test the output after each change.

• A: Discards useful information about what worked.
• B: Large simultaneous changes make it difficult to identify the cause of problems.
• D: Accepts output that does not meet the requirements.

• SQL injection
• Cross-site scripting (XSS)
• Malicious or malformed web requests
• Some application-layer abuse

• Layer 4 firewall: Filters based mainly on IP addresses, ports, and connections; it lacks detailed web-request inspection.
• NGFW: Provides broader network security, but a WAF is more specialized for protecting web applications.
• UTM: Combines multiple security functions, but it is not necessarily optimized for web-application protection.

1. Create or verify cost groups

1. Set up the item model group

1. Create the costing version

1. Enter or calculate item costs

1. Activate the standard costs

• CHAP: Uses a challenge-response exchange, so the password is not directly transmitted.
• IPsec: Provides authentication, integrity, and encryption for IP communications.
• EAP: An authentication framework that supports stronger methods, such as certificates or token-based authentication.

• Active-active routers: Provide redundant Internet connections/devices. Both can operate, so traffic can fail over or be load-balanced.
• Active-active firewalls: Avoid a single firewall becoming a failure point while maintaining security inspection.
• Load balancers: Distribute requests across multiple web servers. If one server fails, traffic can go to the other.
• Redundant power supplies: A server with separate power supplies should connect to independent power sources or circuits.
• UPS A and UPS B: Provide backup power and redundancy. Ideally, each power supply is connected to a different UPS.
• SONET ring: A ring topology provides alternate paths if a fiber link or segment fails.

• Threat perspective: Focuses on possible attacks, but may seem technical or hypothetical.
• Compliance perspective: Can motivate action, but compliance alone does not demonstrate the broader business value of governance.
• Policy perspective: Policies are important, but they are a means of implementing governance, not its primary business justification.

• A: Allow SAN certificates — SANs are used to identify valid hostnames in a certificate. They do not bypass trust validation.
• C: Open the secure LDAP port — A blocked port would normally cause a timeout or connection-refused error, not certificate errors.
• D: Increase the TLS version on the RA — The issue concerns certificate trust, not the organization’s registration authority.

• Endpoint Manager: manages hosts and sensor-related settings.
• Falcon Investigator: supports investigation and analysis, but does not necessarily grant RTR access.
• Remediation Manager: handles remediation-related actions rather than interactive host access.

• Un AG puede tener réplicas en Windows y Linux desde SQL Server 2017; por tanto, una réplica Windows y otra Linux es posible.
• Sin embargo, las réplicas de un AG deben utilizar normalmente la misma versión principal de SQL Server. Una instancia SQL Server 2017 no puede tener directamente una réplica secundaria SQL Server 2019 como configuración normal y permanente.
• En tu escenario, SQL Server 2017 en Windows y SQL Server 2019 en Linux no se pueden añadir directamente como réplicas equivalentes de AG1. Primero habría que realizar un proceso de actualización/migración compatible, por ejemplo mediante una actualización gradual o una tecnología de migración como log shipping o distributed availability groups, según el diseño.

• Tipo de clúster y mecanismo de quorum.
• Failover normalmente manual en configuraciones multiplataforma.
• Edición y características compatibles.
• Configuración de endpoints y permisos.
• Limitaciones específicas de SQL Server en Linux.

• Crash cart: Provides local physical access, not remote access.
• Jump box: A secured intermediary used to reach devices over the normal network; it may be inaccessible if the appliance has not booted.
• Secure Shell (SSH): Requires the device’s operating system and network services to be running properly.

• Honeypots: Deliberately vulnerable or attractive systems designed to lure attackers. Legitimate users should not access them, so activity on a honeypot is a strong indicator of compromise.
• DNS sinkholes: Redirect requests for known malicious domains to a controlled internal system instead of allowing the connection. This can identify infected hosts attempting to contact command-and-control infrastructure.

• Tokenization: Replaces sensitive data with non-sensitive tokens; it protects data but does not primarily detect attackers.
• CI/CD: Automates software development and deployment processes.
• Threat modeling: Identifies potential threats and weaknesses before or during system design.
• Data obfuscation: Makes data harder to understand, but it is not an attacker-detection method.

• Unfamiliar locations or IP addresses
• Anonymous or malicious IP addresses
• Leaked credentials
• Unusual sign-in behavior

• AWS Network Firewall can inspect and block traffic across a VPC when traffic is routed through the firewall. A Drop action rule can deny traffic from the suspicious source IP.
• GuardDuty findings are sent to Security Hub.
• A Lambda function can be invoked when Security Hub receives a new GuardDuty finding, extract the source IP, and update the Network Firewall policy with a blocking rule.

• GuardDuty threat lists: Used to identify or increase the severity of findings; they do not directly block VPC traffic.
• AWS WAF: Protects supported web applications, such as CloudFront or Application Load Balancers. It does not provide general VPC-wide traffic blocking.
• GuardDuty suppression rules: Suppress or hide findings. They do not block the suspicious traffic.

• 255.255.255.128 = /25: 128 total, 126 usable
• 255.255.255.192 = /26: 64 total, 62 usable
• 255.255.255.224 = /27: 32 total, 30 usable
• 255.255.255.240 = /28: 16 total, 14 usable

• One for the network address
• One for the broadcast address

• 8 total addresses
• 6 usable addresses
• Mask: 255.255.255.248

• IaaS: você gerencia a VM e o sistema operacional.
• PaaS: o Azure gerencia a infraestrutura; você se concentra no aplicativo.

• SAML: Enables federated authentication and single sign-on between the IdP and SaaS providers.
• OAuth tokens: Allow delegated application access; OAuth is not primarily the first step for employee SSO.
• Password vaulting: Stores or autofills multiple passwords but does not eliminate the separate credentials or provide true federation.

• Matching hashes suggest the file has not changed.
• Different hashes indicate that the file was modified, whether authorized or unauthorized.

• Backup: Helps recover the previous version but does not identify or stop unauthorized changes.
• File labels: Classify or mark files; they do not verify integrity.
• Security audit: May discover weaknesses or improper changes, but is periodic and not a direct technical integrity control.

• Create and manage approved IT services as products
• Control which users can deploy those products
• Apply governance, permissions, and constraints
• Use and manage infrastructure-as-code templates, such as AWS CloudFormation templates

• AWS Resource Explorer: Helps find and browse AWS resources; it does not govern IaC deployments.
• AWS Organizations: Manages accounts, consolidated billing, and organization-wide policies.
• AWS Systems Manager: Provides operational management, such as patching, automation, and parameter storage, but it is not primarily used to catalog and govern IaC-based service deployments.

• A — If there is no demand, there should be no production.

• B — Not all sales equal profit.

• C — Stocking up on inventory is bad for business.

• D — All costs, except materials, are considered fixed.

• E — Departments should operate at full capacity regardless of bottlenecks.

1. Define – establish the project’s objectives, scope, feasibility and requirements.
2. Design – plan how the project will be carried out, including resources, schedules and controls.
3. Deliver – execute the project and produce the required outputs.
4. Develop – close the project formally and capture learning for future projects.

• Filing documentation and records
• Closing project and accounting systems
• Settling costs
• Handing over the completed work and obtaining sign-off
• Reviewing performance and giving feedback

• Prevention costs – costs incurred to stop defects occurring, such as staff training, quality planning and supplier evaluation.
• Appraisal costs – costs of checking whether products meet standards, such as inspection, testing and quality audits.
• Internal failure costs – costs of defects found before delivery to customers, such as scrap, rework and retesting.
• External failure costs – costs of defects found after delivery, such as warranty claims, returns, complaints and product recalls.

• terraform apply
• terraform destroy

• The selling division receives a credit based on a favourable transfer price, often market price or full cost plus a profit margin.
• The receiving division is charged a lower amount, such as marginal cost or another agreed price.
• The difference is accounted for centrally by head office or a corporate adjustment.

• Limiting the number of MAC addresses allowed on a switch port
• Restricting ports to specific known MAC addresses
• Taking an action—such as dropping frames or shutting down the port—when the limit is exceeded

• Load balancer: Distributes application traffic; it does not protect switch MAC tables.
• IPS: May detect some attack traffic, but is not the primary control for switch-port MAC limits.
• NGFW: Filters network traffic at the firewall, but does not directly control MAC addresses learned by a switch.

• Continuous deployment: Automates software releases; it does not specifically test input handling.
• Static code analysis: Examines source or compiled code without executing it. It can find coding flaws but does not directly stress the application with malformed inputs.
• Manual peer review: Developers inspect code or design manually. Useful, but not the best practice specifically for testing how a live product handles invalid input.

• Ease of exploitation
• Required privileges
• User interaction
• Impact on confidentiality, integrity, and availability

• CVE: Identifies and names a specific publicly known vulnerability; it does not measure severity.
• OSINT: Refers to intelligence gathered from publicly available sources.
• SOAR: Automates and coordinates security operations, such as alert response and playbooks.

• Third-party attestation: Provides independent validation, but is typically periodic and performed by an external party.
• Penetration testing: Simulates attacks to identify exploitable vulnerabilities; it does not primarily track compliance.
• Vulnerability scans: Identify technical weaknesses, but do not provide a detailed review of procedures or compliance activities.

1. Install a Cassandra-compatible ODBC driver.
2. Configure a data source name (DSN), if required.
3. In Power BI Desktop, select Get Data > ODBC.
4. Choose the configured DSN and connect.

• Microsoft SQL Server database: Connects to SQL Server, not Cassandra.
• OLE DB: Requires a compatible OLE DB provider; this is not the standard choice for Cassandra in Power BI.
• OData: Requires Cassandra data to be exposed through an OData service, which is not the normal direct connection method.

• Internal hostnames and subdomains
• Network structure and naming conventions
• Servers and services
• Relationships between systems

• Determining ISP-assigned address space: Usually involves external registration and DNS information, not internal host discovery.
• Bypassing DNS sinkholing: Would require evidence that malicious DNS requests avoided redirection.
• Initial access: DNS queries alone do not show that the attacker gained access.
• Exfiltrating data: DNS tunneling can do this, but the snippet would typically show encoded or unusually long DNS queries.

• The product is already in production.
• The organization is examining the product’s functions and cost drivers.
• The objective is to reduce cost without reducing perceived value or required quality.

• Kaizen costing focuses on continuous, usually incremental, cost reductions during the manufacturing stage. It is not specifically the systematic examination of a product’s functions.
• Standard costing compares actual costs with predetermined standards; it is a control technique, not a product redesign method.
• Process innovation concerns developing significantly improved production processes, rather than analysing the product’s functions and value.

1. x = -100
2. -100 < x < 100
3. 100 = x < 1000
4. x = 1000

• -500 ? class 1
• 0 ? class 2
• 100 ? class 3
• 1000 ? class 4

• A — Use getRecordTypeInfosByDeveloperName()

apex 
  Id rtId = Schema.SObjectType.Account 
      .getRecordTypeInfosByDeveloperName() 
      .get('Business_Account') 
      .getRecordTypeId();

• C — Query the RecordType object

apex 
  RecordType rt = [ 
      SELECT Id 
      FROM RecordType 
      WHERE SObjectType = 'Account' 
      AND Name = 'Business Account' 
      LIMIT 1 
  ];

• B: An outbound SOAP call is unnecessary and inefficient.
• D: Hardcoding an ID is not dynamic, and IDs can differ between orgs.

• Reviewing security objectives to ensure they support business goals.
• Ensuring security requirements are integrated consistently across business units.
• Coordinating security policies, risk management, controls, and awareness activities.

• Executive management: Provides direction, funding, and support, but usually does not manage day-to-day security integration.
• Board of directors: Provides governance and oversight, not operational security coordination.
• Steering committee: Helps coordinate and prioritize initiatives, but the CISO typically owns the overall security program and ensures its integration.

• BCP (Business Continuity Plan): è più ampio e mira a mantenere le funzioni essenziali dell’organizzazione durante un’interruzione. Il DRP è una componente più specifica del BCP.
• Communication plan: stabilisce come comunicare con dipendenti, cittadini e altre parti interessate, ma non ripristina i sistemi.
• IRP (Incident Response Plan): gestisce la risposta iniziale a un incidente di sicurezza, come un attacco informatico, non principalmente il recupero da un disastro fisico.