ASIS ASIS-CPP Exam Prep
ASIS Certified Protection Professional (Page 74 )

1. The sender hashes the original message and sends the message plus its hash.
2. The receiver applies the same hashing algorithm to the received message.
3. The receiver compares the newly calculated hash with the sender’s hash.
4. Matching values indicate that the message was not altered in transit.

• A binary image is not the normal description of a hash result.
• Using a different algorithm produces a different type of digest, so the values cannot be directly compared.
• Hashing verifies integrity, but by itself does not prove who sent the message. Digital signatures or MACs address authentication and integrity together.

• Reviewing security policies and standards checks whether controls are documented, not whether they work.
• Reviewing security logs may show that monitoring is occurring, but does not directly establish that preventive controls are effective.
• Analyzing technical security practices is broad and may assess implementation, but it is less objective than an actual controlled attack.

• Design/compliance effectiveness: policies, standards, and procedures
• Operational effectiveness: logs, records, and evidence that controls operate
• Technical security effectiveness: penetration testing or vulnerability testing

• Drops packets when traffic exceeds a certain bitrate: This describes traffic policing, not shaping.
• Fragments large packets and queues them: Shaping does not fragment packets as its primary congestion-control action.
• Drops packets randomly from lower-priority queues: Packet dropping may occur if a shaping queue becomes full, but it is not the defining behavior.

• Shaping: buffers and delays excess traffic.
• Policing: drops or marks traffic that exceeds the configured rate.

• 25 — Traditional SMTP server-to-server delivery; often restricted for client submission and not inherently encrypted.
• 110 — POP3 for retrieving email; unencrypted by default.
• 143 — IMAP for retrieving and synchronizing email; unencrypted by default.
• 587 — Authenticated SMTP submission, commonly secured with STARTTLS.

• You can configure different pre-shared keys for different device groups.
• All cameras could use one key.
• All scanners could use another key.
• Each key can be associated with an appropriate role or access policy.

• B — AWS DataSync: Transfers data between storage systems, such as S3, file systems, and on-premises storage. It is not a marketplace or catalog for third-party datasets.
• C — Kinesis Data Streams and CodeCommit: CodeCommit is a source-code repository, not a third-party data provider. Kinesis is for streaming data ingestion.
• D — Kinesis Data Streams and ECR: ECR stores container images, not datasets. Kinesis does not provide access to ECR data as an external dataset source.

• B — Single customer login across properties: Customer 360 Identity provides centralized identity services, allowing an organization to recognize a customer across multiple digital properties and applications. This helps UC understand authenticated activity as part of a broader customer identity.

• C — Multi-brand support: Customer 360 Identity can support multiple brands and user experiences. Identity services can remain centralized while correlating a customer’s activity across different corporate brands or channels.

• A: Customer 360 Identity does not automatically populate all data into Customer 360 Data Manager and Customer 360 Audiences. Integration and data configuration are still required.
• D: Tracking anonymous activity and linking it after sign-up may be possible through broader customer-data and tracking implementations, but it is not the primary Customer 360 Identity benefit tested here. Identity focuses mainly on authentication, registration, and cross-property identity correlation.

• A — Correct: Identify the data required by Salesforce, its dependencies, and how it should be validated. Verification scripts help confirm record counts, relationships, field mappings, and data integrity after migration.
• D — Correct: Use a full sandbox and perform trial migrations using realistic—or appropriately masked—legacy data. This exposes transformation, volume, dependency, and integration issues before production cutover.
• B — Less appropriate: Phased user migration and parallel operation primarily address user adoption and rollout risk, not the technical risks of data migration.
• C — Less appropriate: Although sandbox testing and integration testing are valuable, the option emphasizes test-data generation rather than validating the migration with representative legacy data. “A full sandbox for all systems” may also be impractical.

• Árvores de decisão: usam regras sequenciais, como “se característica X > valor, siga para este ramo”. São fáceis de visualizar e explicar. Atendem bem a problemas de classificação e regressão com alta interpretabilidade.

• Regressão linear: prevê um valor numérico contínuo, como preço, custo ou temperatura. Não é a escolha principal para classificar genes em categorias.

• Regressão logística: calcula a probabilidade de uma categoria. Pode atender à classificação, inclusive multiclasses, mas sua explicação costuma ser menos intuitiva que uma árvore para documentar decisões.

• Redes neurais: atendem a tarefas complexas, como imagens, texto e padrões não lineares. Porém, são menos interpretáveis, funcionando mais como uma “caixa-preta”.

• A — Correct: Flow Builder is declarative and visual, so administrators and other non-developers can participate in designing and improving business processes without writing Apex.
• D — Correct: Flow Builder provides visual debugging tools, allowing an admin to test paths, inspect variable values, and identify where a specific business case fails.
• E — Correct: A flow’s visual structure documents the logic and makes later maintenance easier than reading and updating custom Apex code.

• B — Incorrect: Flow debugging does not attach a debugger to live customer sessions. The admin uses Flow Builder’s debug functionality with test inputs; this is not live-session debugging and should not be used to monitor real customer transactions.

• Identifying the communication strategy: Usually part of a business continuity or incident response plan.
• Evaluating the risk management plan: Part of risk assessment and risk management activities.
• Establishing backup and recovery procedures: Usually part of disaster recovery planning.
• Developing the incident response plan: Part of incident response planning.

• Vulnerability scanner: Finds technical weaknesses in systems, applications, or devices. It does not usually analyze the entire supply chain.
• Penetration test: Simulates attacks against a defined target to identify exploitable weaknesses. Its scope is narrower.
• SCAP (Security Content Automation Protocol): Provides standardized formats and methods for automating security configuration and vulnerability checks, rather than mapping the full supply chain.

• staff use the new system;
• transactions and reports are checked;
• problems are corrected;
• feedback is collected.

• Phased changeover: different parts or functions are introduced in stages, often according to a planned sequence.
• Pilot changeover: one representative department, branch or group acts as a test site before wider implementation.
• Parallel changeover: old and new systems operate at the same time.
• Direct changeover: the old system is stopped and the new one starts immediately.

• Secret scope: A named container that groups related secrets and defines access permissions. Example: finance-prod.
• Secret key: The name of an individual secret stored inside that scope. Example: db-password.

text 
Scope: finance-prod 
  Key: db-username 
  Key: db-password

python 
dbutils.secrets.get( 
    scope="finance-prod", 
    key="db-password" 
)

kusto 
Event 
| summarize make_set(EventID) by Computer

• summarize groups records.
• by Computer creates one result row per virtual machine.
• make_set(EventID) returns an array containing unique event IDs for that computer.

kusto 
| summarize make_list(EventID) by Computer

text 
interface GigabitEthernet0/0.10 
 encapsulation dot1Q 3

• .10 is the router’s local subinterface number.
• dot1Q 3 identifies the 802.1Q VLAN tag carried on the trunk.

text 
interface GigabitEthernet0/0.3 
 encapsulation dot1Q 3

text 
interface GigabitEthernet0/0.2 
 encapsulation dot1Q 2

• File1.png — Yes: User1 can apply Label1 with the Microsoft Purview Information Protection client. The client supports labeling image files such as .png in this scenario.

• Folder2 — No: Folder2 is the root folder. The client does not allow labeling the root folder itself. Although the client can label ordinary folders, selecting one applies the label to existing files and subfolders—not automatically to future files.

• File1.docx — Yes: .docx is a supported Microsoft Word file type, so User1 can apply Label1 to it.

• Use private connectivity from a cloud provider
• Set up SSO for federated authentication

• Private connectivity—such as a cloud provider’s private endpoint—keeps Snowflake access within the company’s private network path instead of exposing access over the public internet. This fits the VPN/VDI requirement.
• SSO for federated authentication allows Snowflake users to authenticate using the credentials already managed by the company’s identity provider—the same identity system used for VDI—eliminating separate Snowflake passwords.

• Tri-Secret Secure protects encryption keys; it does not provide private network access or credential reuse.
• A proxy Snowflake account outside the VPN conflicts with the requirement that Snowflake have no internet visibility and is not the normal solution for federated login reuse.

bash 
docker run -it microsoft/azure-cli:0.10.17

• docker run starts an Azure CLI container; it does not automatically connect to the AKS cluster.
• The command does not run kubectl apply.
• The container would need the appropriate Kubernetes tools and AKS credentials.
• The device or container must obtain cluster credentials, typically using an AKS credential command, before running Kubernetes commands.

bash 
az aks get-credentials --resource-group <resource-group> --name <aks-cluster> 
kubectl apply -f myapp.yaml

1. Ensure BOMs can include subcomponents ? Configure an entity relationship

1. Report changes made by engineers ? Enable auditing

• Configure entity relationship
• Configure auditing

• The listener has a virtual IP address on the load balancer.
• The active SQL Server replica must respond using the listener’s IP address, not its own VM IP.
• Floating IP allows the listener IP to be preserved and returned by the active replica.
• This is required for the SQL Always On listener configuration.

• A health probe for the SQL listener/cluster role
• The SQL Server listener port, commonly 1433
• Appropriate backend pool membership

• A — Can help keep costs down and improve quality: The provider may have specialist expertise, efficient systems and economies of scale.
• B — There is a known fee if agreed in advance: A fixed or agreed fee can make costs more predictable and support budgeting.
• C — Allows management to focus on core operations and issues: Senior managers spend less time supervising routine finance processes and more time on strategic matters.

• Increased control: Control may decrease because the activity is performed externally.
• Increased independence: The organisation becomes dependent on the supplier.
• Increased understanding of the outsourcing business: The internal organisation usually has greater business knowledge; the provider may initially lack it.
• Increased confidentiality: Sharing financial information externally may create confidentiality risks.
• Internal expertise improved: Outsourcing can reduce opportunities to develop internal finance skills.

• Laws and regulations
• Litigation holds
• Industry or contractual obligations
• Tax, financial, health, or privacy requirements

• Business strategy and direction: May influence retention, but cannot override legal requirements.
• Storage capacity and longevity: Practical considerations, not the primary driver.
• Business ease and value analysis: May support decisions after compliance obligations are identified.

• Exploitability
• Attack complexity
• Required privileges
• User interaction
• Impact on confidentiality, integrity, and availability

• CVE: Identifies and tracks a specific vulnerability; it does not primarily measure severity.
• OSINT: Open-source intelligence gathered from publicly available sources.
• SOAR: Security orchestration, automation, and response technology used to automate security workflows.

• netstat: Shows local network connections and listening ports, but not which WAN path carries the traffic.
• nslookup: Resolves domain names to IP addresses.
• ping: Tests reachability and latency but does not show the route.

• A: Daily involvement is unnecessary and may not solve the availability problem.
• C: Clarifying all requirements at the start conflicts with agile’s iterative refinement.
• D: Simply reviewing based on availability leaves the problem unresolved and allows rework to continue.

1. Start with the Customer table.
2. Use Merge Queries and select the Address table.
3. Match Customer[Address ID] to Address[Address ID].
4. Use a Left Outer join so every customer is retained.
5. Expand only City, State/Region, and Country.

• Append adds rows vertically; it is for stacking similarly structured tables.
• Group By summarizes rows and does not retrieve address columns.
• Transpose swaps rows and columns and is unrelated to table relationships.

• Separate accounts/domains create a strong administrative boundary between non-production and production.
• Separate projects provide distinct IAM boundaries, billing, quotas, service accounts, and resources.
• Developers can receive permissions in the development project without automatically gaining access to production.
• Production administrators can be restricted from development resources, supporting separation of duties and least privilege.

• A: Creates excessive project fragmentation without being required by the stated requirement.
• C: Keeps development and production under one account and does not clearly separate administrative duties.
• D: Uses one account and only two projects; it provides some project isolation but weaker organizational separation.

• Creating and managing users and roles
• Granting and revoking roles and privileges
• Managing access-control responsibilities

• SYSADMIN: Manages warehouses, databases, schemas, and other objects—not primarily users and roles.
• PUBLIC: Automatically granted to every user; it is not an administrative role.
• ACCOUNTADMIN: Has the highest level of access, but should be reserved for account-level administration and emergencies rather than routine security tasks.

• Managerial: policies, standards, risk management, governance
• Operational: procedures carried out by people, such as training, incident response, and backups
• Technical: firewalls, encryption, access-control systems
• Physical: locks, guards, cameras

• Issuer: Identifies the party issuing a SAML message, commonly the IdP in the SAML assertion. It is not the Salesforce setting used to distinguish Salesforce from other service providers.
• Identity Provider Login URL: Specifies where Salesforce sends users for authentication; it does not identify Salesforce.
• SAML Identity Location: Specifies where the user identity is found in the SAML assertion, such as the subject or an attribute.

• Accept: Acknowledging the risk without taking additional action.
• Mitigate: Reducing the likelihood or impact through controls, such as patching or employee training.
• Avoid: Eliminating the activity or condition that creates the risk.
• Transfer: Shifting the consequences—usually financial—to another party, such as an insurer.

• 16GB RAM: A 64-bit OS is needed to use more than roughly 4GB effectively, but RAM capacity does not prove the CPU supports 64-bit operation.
• 500GB HDD: Storage capacity has no bearing on OS architecture.
• 1Gbps Ethernet: Network speed is unrelated to CPU architecture.

• The VM keeps its configuration, disks, IP settings, and associated resources.
• The operation may cause downtime.
• You cannot guarantee that it will move specifically to Host2; Azure selects the new host.
• Update management is for update configuration, not host relocation.
• Moving to another subscription does not move the VM to a different physical host.
• Usage location is unrelated to VM placement.

• ADF: Automatic Document Feeder; a printer/scanner hardware component.
• USB: A short-range wired connection, not a protocol for accessing a remote shared folder.
• PCL: Printer Control Language; it describes how print jobs are formatted, not how files or printers are shared over a network.

• A: Security groups do not control traffic to an S3 gateway endpoint in this way. Gateway endpoints are configured through route tables.
• B: An S3 bucket policy may be needed for authorization, but the error specifically indicates a connectivity or endpoint-routing problem.
• C: Glue connection settings do not require a fully qualified domain name to resolve this endpoint issue.

• Personally identifiable information (PII) detection

• Prompt Shields

• Self-harm content filtering addresses self-harm-related content.
• Violence content filtering addresses violent content.
• Neither protects customer PII or detects document-based prompt injection.

• Ease of exploitation
• Required privileges
• User interaction
• Impact on confidentiality, integrity, and availability

• CVE: Identifies and names a specific publicly known vulnerability; it does not measure severity.
• OSINT: Refers to intelligence gathered from publicly available sources.
• SOAR: Automates and coordinates security operations, such as alert response and playbooks.

• The servers are powered on.
• The network is functioning.
• Devices can still reach the server network.

• ARP poisoning: Redirects or intercepts local network traffic; it usually affects communication paths rather than overwhelming a service.
• Jamming: Disrupts wireless or radio signals. It would not fit a system that remains accessible from devices on the server network.
• Kerberoasting: Attempts to crack service-account credentials from Kerberos tickets; it does not normally cause an immediate outage.

• Authentication — verifies who the user is.
• Authorization — determines what the authenticated user is allowed to access.
• Accounting — records session activity, such as login time and resource usage.

• CIA — confidentiality, integrity, and availability; core security objectives.
• ACL — access control list; rules that permit or deny traffic or access.
• PEM — Privacy Enhanced Mail, an older email security standard.

• 800 devices ? a scalable, centralized solution is needed.
• Four hardware/vendor classes ? the tool must handle different drivers and images.
• Two user groups ? it should allow different configurations for each group.
• “Distribute custom images” ? an imaging/deployment tool is required, not just a file-copy utility.

• Azure Resource Manager (ARM) templates define Azure resources in a declarative JSON file.
• You can deploy the same template repeatedly for each business unit, ensuring that identical resources are created consistently.
• Templates reduce manual administrative effort and support repeatable, automated deployments.
• Parameters can customize values such as names, regions, and sizes while keeping the overall resource configuration the same.

• Threat perspective: Focuses on possible attacks, but may seem technical or hypothetical.
• Compliance perspective: Can motivate action, but compliance alone does not demonstrate the broader business value of governance.
• Policy perspective: Policies are important, but they are a means of implementing governance, not its primary business justification.

sql 
CREATE PROCEDURE dbo.usp_CreateOrder 
AS 
BEGIN 
    SET NOCOUNT ON; 
    SET XACT_ABORT ON; 


    BEGIN TRY 
        BEGIN TRANSACTION; 


        INSERT INTO dbo.Orders (/ columns /) 
        VALUES (/ values /); 


        SET @OrderID = SCOPE_IDENTITY(); 


        COMMIT TRANSACTION; 
    END TRY 
    BEGIN CATCH 
        IF @@TRANCOUNT > 0 
            ROLLBACK TRANSACTION; 


        THROW; 
    END CATCH; 
END;

• BEGIN TRY contains the transactional work.
• SCOPE_IDENTITY() retrieves the identity generated by the INSERT; it belongs after the insert, not as the error-handling logic.
• COMMIT runs only if all statements succeed.
• BEGIN CATCH handles failures.
• IF @@TRANCOUNT > 0 prevents attempting a rollback when no transaction is active.
• ROLLBACK undoes partial changes.
• THROW re-raises the original error with consistent details for the application.
• SET XACT_ABORT ON ensures many run-time errors automatically terminate and roll back the transaction.

• OpenID Connect (OIDC) is an authentication layer built on OAuth 2.0.
• It returns an ID token, normally a JWT containing identity claims such as the user’s subject, name, email, or other permitted attributes.
• The wellness application can consume those claims without needing a separate user-information call.

• JWT Bearer Token Flow: intended for server-to-server authorization and does not primarily provide an end-user ID token.
• Web Server Flow: is an OAuth authorization-code flow. It can be used with OIDC in some implementations, but “Web Server Flow” alone does not specifically guarantee an ID token.
• User Agent Flow: describes an OAuth flow, not the identity protocol itself.

• Planning – identifying the need, objectives, scope and resources.
• Analysis – understanding business requirements and current problems.
• Design/development – determining how the system will work.
• Implementation – installing the system and putting it into operation.

• A. Microsoft 365 group with Assigned membership
• C. Microsoft 365 group with Dynamic User membership

Why?

• Assigned membership: You explicitly add User1, User2, and User3.
• Dynamic User membership: Membership is automatically determined by a rule based on user attributes.

Why the other options are incorrect

• B and D: Security groups do not support the Microsoft 365 group expiration policy.
• E: Dynamic Device groups are intended for devices, not these users, and are also security groups.

• Field name and label
• Data type
• Reference table
• Default value
• Whether the field is mandatory or read-only
• Field attributes and configuration

• A: Labels and translations are handled through documentation and translation-related records.
• C: Table relationships may be represented through reference fields, but this is not the primary description of the Dictionary.
• D: Spell-checking language data is unrelated to the System Dictionary.