QUESTION: 1

What is the MINIMUM clearance needed between the front of the telephone booth and any wall or fixture for most installations?

300 mm (12 in)
450 mm (18 in)
610 mm (24 in)
914 mm (36 in)
2.4 m (8 ft)

Answer(s): C

Reveal Solution Next Question

QUESTION: 2

Exhibit:

A pay telephone using coins needs to be installed in a public are

In the specifications, it is required that the telephone shall meet the ADA (Americans with Disability Act) requirement for side reach using a wheelchair.
What will be the maximum reachable height or the value of "X"?
760 mm (30 in)
864 mm (34 in)
1170 mm (46 in)
1220 mm (48 in)
1370 mm (54 in)

Answer(s): E

Reveal Solution Next Question

A telephone facility and an electrical facility are required in a tunnel. To reduce the effects of EMI and eliminate the need for additional shielding of the cables, where would each facility be placed?

On opposite sides of the tunnel
On the same sides of the tunnel
Together on the same pathway for easy access and maintenance
One on the top part and one on the bottom part of the same side of the tunnel E. On the exterior of the tunnel

Answer(s): A

Reveal Solution Next Question

QUESTION: 4

Exhibit:

In this future marina layout, what would be the pre-cabling guideline to follow for the terminal A?

Place distribution cable onto the dock and terminate in a suitable cabinet or enclosure. Run service drop to each boat slip.
Provide one or two pair cables from the boat slips to a distribution terminal on the closest point of land.
Pre-cable each boat slip during construction.
For security, each run should be terminated in the patch panel/ cross-connect at the dockmaster or marina office.

Answer(s): A

Reveal Solution Next Question

Free RCDDv14.1 Exam Braindumps (page: 2)

Pass your BICSI Registered Communications Distribution Designer Exam exam with these free Actual Questions and Answers

QUESTION: 1

QUESTION: 2

QUESTION: 3

QUESTION: 4