Checkpoint 156-315.81 Exam Prep
Check Point Certified Security Expert R81 (Page 15 )

• TLS passthrough: A TCP listener does not decrypt traffic. The client establishes TLS directly with the backend, so the backend can perform mutual TLS (mTLS) authentication.
• gRPC over TCP: gRPC commonly uses HTTP/2 over TLS, and an NLB can forward the underlying TCP connections without modifying them.
• Scalability: Registering the Pods as IP targets allows Kubernetes to add or remove Pods as the Horizontal Pod Autoscaler changes the workload. The AWS Load Balancer Controller updates the target registrations.
• Port 443: The NLB can forward TCP traffic on port 443 without terminating TLS.

• An ALB HTTPS listener terminates TLS at the load balancer, violating the requirement that traffic must not be decrypted before reaching the backend.
• Targeting the EKS node group's Auto Scaling group does not directly track dynamically scaling Pods.
• An NLB TLS listener also terminates TLS at the NLB, preventing end-to-end mTLS between the client and backend.

• S3 Glacier Deep Archive is designed for long-term archival data with very infrequent access and has a lower storage cost than S3 One Zone-IA.
• The documents are copies stored elsewhere, so reduced availability and delayed retrieval are acceptable.
• An S3 interface VPC endpoint allows private access from the VPC without exposing the bucket through the public internet.
• A bucket policy can restrict access to requests coming through that endpoint.

• Third-party attestation: Provides independent confirmation, often for formal compliance reporting, but is not usually performed frequently.
• Penetration testing: Attempts to exploit vulnerabilities; it focuses on technical security, not overall compliance procedures.
• Vulnerability scans: Identify known technical weaknesses in systems, but do not evaluate whether policies and processes meet compliance requirements.

• A PostToolUse hook for file writes under src/api/ that runs the linter.
• A separate PostToolUse hook for API/data processing that normalizes payloads to snake_case.

• Frequency/likelihood = how often or how likely the risk is to occur.
• Severity/impact = how damaging or costly the consequences would be.

• A minor equipment fault occurring frequently may have high frequency but low severity.
• A major cyberattack occurring rarely may have low frequency but high severity.
• A risk that happens often and causes substantial losses has high frequency and high severity.

• D — Managers focus on keeping costs low in the short term to maximise profits.

• E — Managers are given incentives to meet or undercut budgets.

• F — Managers delegate responsibility simply to reduce their workload.

bash 
OTEL_SERVICE_NAME=foundry-agent

bash 
OTEL_SERVICE_NAME=langchain-service

python 
import os 


os.environ["OTEL_SERVICE_NAME"] = "langchain-service" 


from azure.ai.openai... # import your tracing components 
from azure.monitor.opentelemetry import configure_azure_monitor 


configure_azure_monitor( 
    connection_string=os.environ["APPLICATIONINSIGHTS_CONNECTION_STRING"] 
)

• Agent application: OTEL_SERVICE_NAME=foundry-agent
• LangChain application: OTEL_SERVICE_NAME=langchain-service

• Azure Machine Learning Studio is designed to build, test, train, and deploy machine-learning models, including predictive analytics.
• Azure Cosmos DB is a globally distributed NoSQL database. It can store data used by an AI solution, but it is not the primary service for developing and deploying predictive models.
• Therefore, the appropriate recommendation is Azure Machine Learning Studio, as shown in Question 15.

• A — Improved management of storage space: Correct.

• B — Improved supplier relationships: Correct.

• C — Improved pricing decisions: Correct.

• D — Non-product-specific costs must be apportioned: Incorrect.

• E — Profitability of each customer group: Incorrect.

• Reduce the training data: Usually makes overfitting worse.
• Add hyperparameters: Hyperparameters already control training; simply adding them does not solve the problem. Proper tuning could help, but that is not what the option states.
• Increase training time: More training can worsen overfitting if the model is already memorizing the training data.

• New investment: $536,500
• Resulting NPV: $0

• SOSL searches text across objects and is not appropriate for selecting Account table columns.
• describeSObjects() provides metadata about objects and fields, but it does not itself build or execute the query.
• Dynamic Schema binding supports runtime determination of object and field information, which is required here.
• REST API is unnecessary because this is being implemented in Apex.

• Firewall
• Intrusion prevention and detection
• Antivirus or antimalware
• Web and email filtering
• Virtual private networking (VPN)
• Sometimes content filtering and centralized reporting

• Determine the project budget — Budget development is a separate cost-management activity.
• Develop a communication plan — This belongs to project communications planning, not schedule completion.
• Establish baselines — Baselines are created after the schedule and related plans have been developed and approved. They formally capture the approved plan.

• Self-signed certificate: Causes a browser security warning, not incorrect name resolution.
• Nameserver record: A DNS problem would typically affect multiple users, not just one workstation.
• IP helper: Relays services such as DHCP across network segments; it does not resolve website names.

• Sustainability
• Performance efficiency
• Reliability

• B. Versioned configuration files — Infrastructure is defined in machine-readable files and tracked in version control, allowing repeatable provisioning and change history.
• D. Docker files — Assuming “Doctor files” is a typo for Dockerfiles, a Dockerfile declaratively defines how to build a container image and is commonly considered infrastructure/configuration as code.

• A. Cloned virtual machine images — These are prebuilt infrastructure artifacts, but cloning an image is not itself a code-based infrastructure definition.
• C. Change management database records — A CMDB records information about infrastructure; it does not define or provision that infrastructure.

1. Create Workspace2 with Lakehouse2 — F
2. Migrate the Employee table to Lakehouse2 — E
3. Assign the data engineer the Contributor role for Workspace1 — D

Why

• Sharing Lakehouse1 would not provide the required isolation.
• Viewer access would not allow writing to Customer.
• Giving Contributor access to Workspace2 would expose the sensitive table.

• Run the backup with WITH CHECKSUM
• Store the backup on an SMB network share

sql 
BACKUP DATABASE DB1 
TO DISK = '\\FileServer\SqlBackups\DB1_full.bak' 
WITH CHECKSUM;

• DMS does not create the SQL Server backups for you.
• You must provide a valid full database backup.
• You must continue taking transaction log backups while the source database remains online.
• The full backup and subsequent log backups must be available in the SMB share that DMS can access.
• WITH CHECKSUM enables backup checksum validation, helping detect backup corruption.

• Type 1 hypervisor: Runs directly on the physical hardware (“bare metal”).
• Type 2 hypervisor: Runs inside the host OS as an application.

• Bare-metal installation: Type 1
• Local management only: Not a defining characteristic
• Specific hardware requirements: Not the key distinction

• A. IDS attack signatures: An IDS mainly detects suspicious network traffic. It is not the best control for scanning uploaded documents.
• C. Load balancer: Distributes traffic among servers and can improve availability, but does not specifically detect malware.
• D. WAF: Protects web applications from attacks such as SQL injection and command injection. It may inspect web requests, but malware scanning of PDF files is not its primary function.

• Transport and handling
• Storage and warehousing
• Refrigeration
• Shelf-stacking or replenishment
• Other costs directly attributable to product P

• Sales process: Controls which Opportunity Stage values are available.
• Record type: Associates the appropriate sales process with a business scenario and controls available picklist values.
• Page layout: Controls which fields are displayed and whether they are required or read-only.

• Energy Market Team 1 ? Record Type 1, Sales Process 1, Page Layout 1
• Energy Market Team 2 ? Record Type 2, Sales Process 2, Page Layout 2
• Services/Installation Team ? Record Type 3, Sales Process 3, Page Layout 3

• Act as the default gateway for devices in that VLAN
• Route traffic between different VLANs
• Provide management access to the switch

text 
interface vlan 10 
 ip address 192.168.10.1 255.255.255.0

• Suspended an operator who correctly refused to use unsafe equipment.
• Rewarded another operator for using the equipment despite the broken safety guard.

• A — Management is not particularly concerned with managing risks.

• B — Employees will perceive that management does not care about health and safety risks.

• C — This factory’s safety record is likely to be poor.

• Accept: Acknowledge the risk and take no additional action.
• Transfer: Shift the risk or financial impact to another party, such as through insurance or a contract.
• Mitigate: Reduce the likelihood or impact using controls, such as firewalls, training, or backups.
• Avoid: Eliminate the activity that creates the risk.

• SAS (Serial Attached SCSI):

• SSD (solid-state drive):

• C — Create a form extension and implement validation

• D — Use Chain of Command (CoC) with a form extension class

• Process Builder: Automates actions based on record changes but does not create interactive forms.
• Approval Process: Routes records for approval; it is not designed to collect information through a wizard.
• Outbound Message: Sends information to an external system; it does not provide a user interface.

• The requirement is to obtain an assessment of the Azure environment’s design.
• The proposed solution is the Premier support plan.
• Premier can provide this type of guidance, but it is a higher-tier, more expensive option.
• The question specifically says to keep costs to a minimum. A lower tier—typically Professional Direct in the support-plan model used by this question—provides architectural/design guidance.

• up ? down ? up
• Often happens rapidly or intermittently

• Faulty or loose cable or connector
• Failing transceiver, NIC, or switch port
• Speed/duplex or auto-negotiation problems
• Power or hardware instability
• Layer 1 interference

• Nothing plugged in: the port is simply down
• Latency: does not directly trigger err-disable
• shutdown: administratively disables the port, but that is not the same as an automatically detected err-disabled condition

• Three DHCP scopes: Each VLAN has its own IPv4 subnet. DHCP scopes are subnet-specific, so create one scope for:

• Two DHCP relays: DHCP client discovery begins as a broadcast, and broadcasts do not cross routers or VLAN boundaries. Therefore, configure a DHCP relay on the router or Layer 3 switch interface for each client VLAN.

• Accept: Acknowledges the risk without taking additional action.
• Transfer: Shifts the risk or financial impact to another party, such as an insurer.
• Mitigate: Reduces the likelihood or impact through controls like patching, MFA, or segmentation.
• Avoid: Eliminates the activity that creates the risk.

• Disabling a compromised account
• Blocking a malicious IP address
• Isolating an endpoint
• Creating or escalating an incident ticket

• Virus signatures: Primarily associated with antivirus or endpoint protection.
• Security agent deployment: Usually handled by endpoint-management or security-agent platforms.
• Vulnerability scanning: Typically performed by vulnerability-management tools.

• Accept: Acknowledge the risk and take no additional action.
• Transfer: Shift the risk or its financial impact to another party, such as through insurance or outsourcing.
• Mitigate: Reduce the likelihood or impact of the risk, such as by implementing security controls.
• Avoid: Eliminate the activity or exposure that creates the risk.