QUESTION: 9

What is meant by Stakeholder Mapping? Describe a tool that can be used by a Procurement Professional to map the stakeholders at their organisation (25 points)

See Explanation section for answer.

Answer(s): A

Explanation:

How to approach this question:

- Define stakeholder mapping completing an analysis of the stakeholders of an organisation and dividing them into categories depending on certain characteristics. This is often represented visually on a graph or matrix.
- Describe a Stakeholder mapping tool the most common tool is Mendelow's Stakeholder Matrix so I would recommend using this one. It is explained in detail in the study guide. However, the question is open so you could choose to describe another tool such as Edgar's Stakeholder Position Analysis if you so wished. You wouldn't be wrong choosing this, but honestly, I'd just go for Mendelow. You can't go wrong with Mendelow. Because the Matrix has 4 sections you can imagine you'd get 5 points for the definition of stakeholder mapping, and 5 points for each of the quadrants of the matrix.

Essay Plan:
Introduction - The reason why stakeholder mapping is important is because interests and expectations of stakeholder groups will be different and possibly conflicting. Mapping this allows an organisation to see the variety and decide on an appropriate management style for each stakeholder group.
Paragraph 1 - Mendelow's Power / Interest Matrix maps stakeholders based on their influencing power and the strength of their motivation to use that power. It uses a 2x2 grid and defines power as high or low and interest and high or low. It then provides four strategies for managing the stakeholders based on which quadrant of the grid the stakeholder falls into. These 4 categories are:
Paragraph 2 - Keep satisfied high power but low interest. If the stakeholder becomes dissatisfied or concerned their interest may peak. Examples include regulatory bodies, shareholders, senior management. The best approach is to keep them up to date so they are informed of what is going on, but do not burden them with information they do not need. Paragraph 3 - Manage Closely AKA Key players includes major customers, key suppliers, partners, senior management. These stakeholders need to know everything that is going on and approve of what is going on. The recommended strategy is early involvement and participation, and integrating their goals with yours. This group requires regular communication and meetings. You should take their opinions on board.
Paragraph 4- Monitor minimum effort required this is the low priority group as they have low power and low interest. Includes small volume suppliers and other organisational functions with no direct interest in your activities. This group does not need to receive regular communication. Paragraph 5 - Keep informed - high interest, but low power. If they're not kept in the loop and understand the need for decisions, they may lobby together to protect their interest if they feel threatened. Employee groups, suppliers and community groups may be in this category. This group should receive regular communication.
Conclusion - Mendelow created the matrix in 1991 and it is still used today. It is a popular management tool due to its simplicity. It's important to notes that stakeholders can move through the matrix- it isn't stagnant. For example, at the beginning of a project a manager in another department may be classed as `low priority' because they are seen to have no interest and no power in the project. However, as the project progresses the manager may become interested. They will then transfer into the keep informed category. Therefore, the matrix should be redone regularly throughout the lifetime of a project to capture any movements. The matrix should also be redone for each individual project it cannot be assumed that a stakeholder who had interest in one project would be interested in another.

Tutor Notes
- The above essay plan is basically the entire essay, I got carried away. The only thing you'd need to add into that is an example of a stakeholder for each of the sections! (e.g. the CEO is high power, but low interest stakeholder for the procurement department. He/ She doesn't care about the day to day operations but should be kept informed of any big news). For your examples you could use your own place of work.
- At level 4 you don't have to analyse the model, you just have to be able to memorise it and repeat it. Mendelow comes up again at Level 5 and 6 in a bit more detail. If you want to score super bonus points you could mention in your conclusion that the main disadvantage of Mendelow's Matrix is that it doesn't take into consideration the stakeholder's position on the project whether they're for it or against it. Therefore, it doesn't provide the full picture or provide much help on how to manage stakeholders. E.g. two stakeholders might both be in `manage closely' section, but one is for the project and the other against they'd need to be handled very differently!

- Study guide p. 65

Reveal Solution Next Question

QUESTION: 10

Sarah has recently been hired as the new Head of Procurement at Alpha Ltd, a manufacturer of small electronics such as hairdryers and alarm clocks. Alpha Ltd has a large factory based in Birmingham where many of the products are manufactured. One of the large pieces of machinery in the factory has recently broken and Sarah has been charged with replacing it as quickly as possible. Sarah is considering using the Whole Life Costing approach to this procurement.
What is meant by Whole Life Costing? (5 points). Discuss 5 factors that Sarah should consider when buying new machinery (20 points).

See Explanation section for answer.

Answer(s): A

Explanation:

How to approach this question
- I'd use clear headings with numbers for this one. It asks you for a definition and 5 factors. Number them. Makes it easy for you to write and easy for the examiner to mark.
- Don't go over 5 you won't get any extra points for this. So spend your time giving examples and explaining the 5 well, rather than naming more than 5.
Example Essay
As the new Head of Procurement at Alpha Ltd, Sarah faces the urgent task of replacing a critical piece of machinery in the company's Birmingham factory. Recognizing the complexity of the decision, Sarah contemplates utilizing the Whole Life Costing approach to ensure a comprehensive evaluation that goes beyond initial expenses. This essay explores the concept of Whole Life Costing and delves into five essential factors Sarah should consider when procuring new machinery.
Definition:
Whole Life Costing (WLC) is a procurement approach that considers the total cost associated with an asset throughout its entire lifecycle. Unlike traditional procurement methods that focus primarily on the initial purchase price, WLC evaluates all costs incurred from acquisition to disposal. This includes operational, maintenance, and disposal costs, providing a holistic perspective on the true financial impact of an asset over time.

Factors to Consider in Machinery Procurement

1) Initial Purchase Price:
While WLC looks beyond the initial cost, the purchase price remains a critical factor. Sarah should balance the upfront expense with the long-term costs to ensure the initial investment aligns with the overall financial strategy.
2) Operational Costs:
Sarah needs to analyze the ongoing operational costs associated with the new machinery. This includes energy consumption, routine maintenance, and potential repair expenses. Opting for energy-efficient and reliable equipment can contribute to substantial operational savings over the machine's lifespan, even though this may result in a higher up-front purchase price
3) Training and Integration:

The cost of training employees to operate and maintain the new machinery is a significant consideration. Sarah should assess how easily the equipment integrates into existing workflows and whether additional training programs are required, impacting both immediate and long-term costs.
4) Downtime and Productivity:
Evaluating the potential downtime and its impact on productivity is crucial. Sarah should assess the reliability and historical performance of the machinery to gauge its potential contribution to sustained production levels and minimized disruptions, impacting the overall operational efficiency.
5) Technology Upgrades and Adaptability:

Sarah should consider the machinery's adaptability to technological advancements and potential upgrades. Investing in equipment that allows for seamless integration with future technologies ensures that Alpha Ltd remains competitive and resilient in a rapidly evolving industry landscape. In conclusion, adopting a Whole Life Costing approach empowers Sarah to make informed decisions that align with Alpha Ltd's strategic goals. By considering factors beyond the initial purchase price, such as operational costs, training, downtime, and technology adaptability, Sarah ensures that the replacement machinery not only meets immediate production needs but proves to be a cost- effective and efficient asset throughout its entire lifecycle. The WLC approach safeguards against unforeseen financial burdens, fostering sustainable and informed procurement practices in the dynamic manufacturing environment.

Tutor Notes
- Whole Life Costing is on p.28
- Total Life Cycle Costs, Total Cost of Ownership and Life Cycle Costs are all practically the same thing. The book says they're slightly different, but don't get yourself bogged down in trying to remember the differences. Honestly, in the real world, people use this language interchangeably.
- Other factors you could have chosen to talk about include commissioning costs and disposal costs
- Don't worry if you feel CIPS breezed through this as a topic, they did. It's explained much better in L4M7. You can read more about it here: Whole Life Costing - What is Whole Life Costing | CIPS and here Whole-Life Cost: What it Means, How it Works (investopedia.com)

Reveal Solution Next Question

QUESTION: 11

Describe the main stages of the CIPS Procurement and Supply Cycle (25 points)

See Explanation section for answer.

Answer(s): A

Explanation:

How to respond to this question:
- Include as many of the stages as you can, but it's not vital to remember them all. You should aim to remember at least 8 of the 13 steps.
- The steps are; Define Business Need, Market Analysis + Make vs Buy, Develop Strategy and Plan, Pre-Procurement Market Testing, Develop Documents and Specification, Supplier Selection, Issue Tender, Bid Evaluation, Contract Award and Implementation, Warehouse Logistics, Contract performance and Improvement, Supplier Relationship Management and Asset Management

Essay Plan:
Introduction - Explain what the CIPS Procurement and Supply Cycle is- a tool to be used by procurement professionals which tracks a procurement exercise from inception to close. It's helpful as it ensures procurement exercises are done correctly and steps are completed in the right order.
- Describe (briefly) what happens at each stage of the cycle, giving examples. You should put each stage into a separate paragraph. It's also a good idea to name the stages in chronological order. Some ideas of things you could mention include:
1) Define Business Need and Develop Specification - Identify what the need is, what type of purchase, put together a business case and outline the requirements
2) Market Analysis and Make vs Buy Decision analyse the market using market segmentation (e.g. by buyer, product, geography etc) or use Porter's 5 Forces (buyer and supplier power, threat of new entrants, threat of substitutions, supplier rivalry). Looks at if what you want to procure is actually available.
3) Develop Strategy / Plan you could use a STEEPLE and SWOT analysis. Consider if this is the right time to procure. Create timelines and budgets.
4) Pre-Procurement Market Testing - consider stakeholder engagement, supplier engagement, new / upcoming legislation, currency fluctuations, market, competitor actions. Is this the best time to procure? Will it be successful?
5) Develop Documentation / Creation of Contract terms- firm up the requirements and create the formal documents for the tender exercise. This may be a RFQ or ITT. Define the offer. Include KPIs.
6) Supplier Selection May not be required for rebuys but an important step for new buys. May use a list of pre-approved suppliers or this may be going out to the open market. You can shortlist suppliers by sending out a pre-qualification questionnaire.
7) Issue Tender - Electronically, consider whether to use an open vs closed procurement exercise
8) Bid / Tender Evaluation Very flexible for companies in the private sector but there are guiding principles for doing this for public procurement; transparency, equal treatment, proportionality.
Often considers both price and quality.
9) Contract Award and Implementation- Organisations may have different processes for different values (e.g. large purchases may need senior management approval, but under £500 just needs a manager's signature). May require post-award negotiation. Contract is drafted and signed.
10) Warehouse Logistics and receipt includes POs and Invoices. Battle of the Forms. Goods Inwards = receiving and inspecting goods- may use quality control.
11) Contract performance review - ensuring contract obligations are fulfilled includes P2P procedures, database management, budgeting / costs monitoring, reporting and dispute resolution.
12) Supplier Management will depend on the relationship but includes; contact / meetings with the supplier, motivating / incentivising the supplier, working with them on performance issues, ensuring KPIs are met.
13) Asset Management / End of Life- considers TCO, ongoing maintenance and costs, insurance and warrantees and disposal of the item once it has reached the end of its life. Conclusion The CIPS Procurement Cycle is cycle rather than process as it is a continuous loop and needs constantly emerge. It never ends. New buys are more likely to follow all the stages of the cycle, rebuys may skip steps

Tutor Notes:
- Often steps 11 and 12 are confused or merged together but they are different. It's possible to have great contract management and a poor supplier relationship i.e. the contract is working effectively and the supplier is delivering in line with the contract BUT the relationship may be fraught with tension and the buyer and supplier don't like each other.
- To get a high score I would include examples of all of the stages, but remember you only have 45 minutes to answer the question, so balance detail with timing so you don't overwrite
- The procurement cycle is on p. 70 or you can download it here: Procurement Supply Cycle | CIPS

Reveal Solution Next Question

QUESTION: 12

Explain 5 stages of the sourcing cycle that occur in the pre-contract stage (25 points)

See Explanation section for answer.

Answer(s): A

Explanation:

How to approach this question:
- The Sourcing Cycle is the first half of the CIPS Procurement Cycle and includes these steps:
1) Define Business Need
2) Market Analysis + Make vs Buy
3) Develop Strategy and Plan
4) Pre-Procurement Market Testing
5) Develop Documents and Specification
6) Supplier Selection
7) Issue Tender
8) Bid Evaluation
9) Contract Award and Implementation
Your response should detail 5 of these. It is a good idea to pick the ones you know most about and where there is more to write about. You won't get any extra points for naming more than 5 so focus on getting as much detail down about 5, rather than explaining more of them.

Essay Plan
Introduction explain what the sourcing cycle is the stages of the procurement cycle before a contract is signed. It describes the steps an organisation will take to source/ procures goods or services.

Paragraph 1 Define the business need
· How is the need identified? E.g. by end user, stores department, ERP system. · Procurement should challenge this is it really necessary? Suggest alternatives this could be a key source of added value
· Put together business case / requisition / project initiation document · What type of purchase? Straight rebuy, modified rebuy, new purchase · Decide on what type of specification would be best - Conformance vs performance specification · This stage may include early supplier involvement
Paragraph 2 Market Analysis and Make vs Buy Decision · Create an Analysis by segmenting the market by buyer, product, distribution channel, geography, customer market etc.
· Make vs Buy - use Carter's Matrix to decide whether the organisation should make vs buy.

· Also consider outsourcing at this stage
Paragraph 3 Documents and Specification
· Draft documents. These may include a RFQ or ITT, a specification and a proposed form of contract · Specification may be conformance or performance based · A contract sets out the roles, rights, responsibilities and obligations of the parties and shows intention to enter into `legal relations'
· This stage defines the `offer' which becomes binding once other party accepts · Documentation may also include proposed KPIs and SLAs Paragraph 4 Supplier Selection
· For a new purchase, supplier selection is very important - investigation should be proportionate to the value of the procurement. For rebuys or low-risk purchases you could use the same supplier or a list of pre-approved suppliers.
· You can locate potential suppliers by; catalogues, websites, trade registers, market exchanges and review sites, trade or industry press, fairs and conferences, networking and recommendations/ referrals.
· You can shortlist suppliers by sending out a pre-qualification questionnaire. This adds value by reducing wasted time / costs / risks to entering into a contract with the wrong supplier. · Other criteria for supplier selection include using Carter's 10 Cs (competency, consistency, capability, control, cost, cash, clean, communication, culture, commitment), the supplier's financial standing (e.g. liquidity and gearing), references and considering their CSR policy.
Paragraph 5 Issue Tender
· Competitive bidding should only be done when there's sufficient time and resources available, there's sufficient suppliers in the marketplace, they're keen to win business (ie that there's appetite for competition) and there is a strong specification
· Best practice is to issue tenders electronically as it ensures equal treatment of suppliers and transparency
· Consider open vs closed procurement processes
· Use a cross-functional team particularly when marking responses Conclusion you could mention here that different sourcing activities may require more or less effort at each of the stages e.g. procuring a new item may require more market analysis than a re-buy.

Tutor Notes:
- If you want to add in extra details, you could think about ways procurement can add value at each stage
- In the old syllabus, CIPS were a bit obsessed with Michael Porter. In the Market Analysis bit you could talk about using Porter's 5 forces (buyer and supplier power, threat of new entrants, threat of substitutions, supplier rivalry) and Porter's 3 generic strategies for competing (cost leadership, differentiation, niche segment). This has been removed from the study guide so it's not essential to know this for this module, but if you've seen it before it's a nice one to throw in.
- You could also mention that there are differences between the public and private sector procurement at the different stages. E.g. Public Sector requires open competitions for contracts of a certain value and must follow the rules set out in Public Contract Regulations the private sector doesn't have such strict regulations so there is much more flexibility in how tenders are completed. Also in the public sector, the evaluation criteria needs to be agreed beforehand and presented in the ITT- not the same for the private sector.
- Study guide p.71

Reveal Solution Next Question

Free L4M1 Exam Braindumps (page: 3)

QUESTION: 9

Explanation:

QUESTION: 10

Explanation:

QUESTION: 11

Explanation:

QUESTION: 12

Explanation: