Cisco
CompTIA
ISC
EC-Council
EXIN
Fortinet
ITIL
Juniper
Microsoft
VMware
Avaya
SAP
Google
NVIDIA
Salesforce
Amazon
Palo Alto Networks
ISC2
Splunk
ServiceNow
All Vendors
  2. Home
  3. Exams
  4. Cisco
  5. 200-301

Cisco 200-301 Exam Questions
Cisco Certified Network Associate (CCNA) (Page 27 )

Updated On: 24-Feb-2026
Page 27 of 281
PDF with 1395 Questions

What are the two functions of SSIDs? (Choose two.)

  1. uses the maximum of 32 alphanumeric characters
  2. controls the speed of the Wi-Fi network
  3. used exclusively with controller-based Wi-Fi networks
  4. supports a single access point
  5. broadcasts by default

Answer(s): A,E



Which two characteristics describe the access layer in a three-tier network architecture? (Choose two.)

  1. serves as the network aggregation point
  2. physical connection point for a LAN printer
  3. designed to meet continuous redundant uptime requirements
  4. layer at which a wireless access point connects to the wired network
  5. provides a boundary between Layer 2 and Layer 3 communications

Answer(s): B,D

Explanation:

The Access Layer is the one closer to the users. In fact, at this layer, we find the users themselves and the access-layer switches. The main purpose of this layer is to physically connect users to the network. In other words, there is just a cable between end-user PCs, printers, and wireless access points and access-layer switches.



Which PoE mode enables powered-devices detection and guarantees power when the device detected?

  1. auto
  2. static
  3. dynamic
  4. active

Answer(s): A



Refer to the exhibit. The router has been configured with a super net to accommodate the requirements for 380 users on a Subnet. The requirement already considers 30% future growth. Which configuration verifies the IP subnet on router R4?

  1. Subnet: 10.7.54.0 Subnet mask: 255.255.128.0 Broadcast address: 10.5.55.255 Usable IP address range: 10.7.54.1 “" 10.7.55.254
  2. Subnet: 10.7.54.0 Subnet mask: 255.255.255.0 Broadcast address: 10.7.54.255 Usable IP address range: 10.7.54.1 “" 10.7.55.254
  3. Subnet: 10.7.54.0 Subnet mask: 255.255.254.0 Broadcast address: 10.7.54.255 Usable IP address range: 10.7.54.1 “" 10.7.55.254
  4. Subnet: 10.7.54.0 Subnet mask: 255.255.254.0 Broadcast address: 10.7.55.255 Usable IP address range: 10.7.54.1 “" 10.7.55.254

Answer(s): D



Refer to the exhibit. Configurations for the switch and PCs are complete. Which configuration must be applied so that VLANs 2 and 3 communicate back and forth?

  1. interface GigabitEthernet0/0 ip address 10.10.2.10 255.255.252.0
  2. interface GigabitEthernet0/0.10 encapsulation dot1Q 3 ip address 10.10.2.10 255.255.254.0
  3. interface GigabitEthernet0/0.3 encapsulation dot1Q 3 native ip address 10.10.2.10 255.255.252.0
  4. interface GigabitEthernet0/0.3 encapsulation dot1Q 10 ip address 10.10.2.10 255.255.255.252

Answer(s): B






Post your Comments and Discuss Cisco 200-301 exam dumps with other Community members:

Join the 200-301 Discussion