Your controller has a high performance EtherNet/IP interface with port speed of >30, 000
packets per second and 80% spare capacity. A new PowerFlex 753 drive wil be added to the
system with an RPI ms and has been connected to a switch; you have been asked to set up the
switch port. You open the EDS file and see that the drive wil support 16 CIP connections and
has transmit and receive capacity of 1, 000 control packets per second. What do you set as the
storm control pps threshold limit for the port?
B. 1, 000
C. 2, 500
D. 25, 000
Which option allows an EtherNet/IP I/O device to be safely installed where it is subject to water
A. The device is rated IP20 and the power wiring is installed securely to the terminal block.
B. The device is rated IP67 and a power cordset is used.
C. The device is rated IP67 and immersed to 10 m.
D. The device is rated IP20 and immersed to 10 m.
Why is SSH preferred over Telnet as a method of accessing a network device to alter or view
A. Telnet encrypts only the login information, not the entire transmission.
B. SSH requires fewer network resources and no additional configuration.
C. Telnet is more difficult to use and configure than SSH.
D. SSH encrypts the login and session information.
A small manufacturing company has a Class C network address on the plant floor and needs to
create five subnets, each accommodating 25 endpoints. Which subnet mask needs to be