Free 300-410 Exam Braindumps (page: 46)

Page 45 of 156

Refer to the exhibit. Network operations cannot read or write any configuration on the device with this configuration from the operations subnet. Which two configurations fix the issue? (Choose two.)

  1. Configure SNMP rw permission in addition to community ciscotest
  2. Modify access list 1 and allow operations subnet in the access list.
  3. Modify access list 1 and allow SNMP in the access list.
  4. Configure SNMP rw permission in addition to version 1
  5. Configure SNMP rw permission in addition to community ciscotest 1

Answer(s): B,E



Refer to the exhibit. Why is the remote NetFlow server failing to receive the NetFlow data?

  1. The flow exporter is configured but is not used.
  2. The flow monitor is applied in the wrong direction.
  3. The flow monitor is applied to the wrong interface.
  4. The destination of the flow exporter is not reachable.

Answer(s): A



Refer to the exhibit. An engineer has successfully set up a floating static route from the BRANCH router to the HQ network using HQ_R1 as the primary default gateway. When the g0/0 goes down on HQ_R1, the branch network cannot reach the HQ network 192.168.20.0/24.


Which set of configurations resolves the issue?

  1. HQ_R3(config)# ipsla responder
    HQ_R3(config)# ipsla responder icmp-echo 172.16.35.1
  2. BRANCH(config)# ipsla 1
    BRANCH(config-ip-sla)# icmp-echo 192.168.100.2
  3. HQ_R3(config)# ipsla responder
    HQ_R3(config)# ipsla responder icmp-echo 172.16.35.5
  4. BRANCH(config)# ipsla 1
    BRANCH(config-ip-sla)# icmp-echo 192.168.100.1

Answer(s): D



An engineer configured a DHCP server for Cisco IP phones to download its configuration from a TFTP server, but the IP phones failed to load the configuration.

What must be configured to resolve the issue?

  1. BOOTP port 67
  2. DHCP option 66
  3. BOOTP port 68
  4. DHCP option 69

Answer(s): B






Post your Comments and Discuss Cisco® 300-410 exam with other Community members:

300-410 Exam Discussions & Posts