Cisco
CompTIA
ISC
EC-Council
EXIN
Fortinet
ITIL
Juniper
Microsoft
VMware
Avaya
SAP
Google
NVIDIA
Salesforce
Amazon
Palo Alto Networks
ISC2
Splunk
ServiceNow
All Vendors
  2. Home
  3. Exams
  4. Cisco
  5. 300-610

Cisco 300-610 Exam
Designing Cisco Data Center Infrastructure for Traditional and AI Workloads (Page 6 )

Updated On: 1-Feb-2026
Page 6 of 42
PDF with 306 Questions

A customer connects a high-speed Fibre Channel storage array to a Cisco MDS 9000 Series Switch using an 8 Gbps interface.

Which action guarantees line rate traffic processing on the interface?

  1. Set global buffering with B2B_credits for the interface.
  2. Set local buffering with B2B_credits for the interface.
  3. Configure the interface rate mode as dedicated.
  4. Configure the interface rate mode as shared.

Answer(s): C



An engineer must implement a WWPN pool for the vHBA template inside the Cisco UCS Manager. The template is used to connect a Cisco UCS B-Series blade to an external storage array.

Which addressing sequence accomplishes this goal?

  1. from 20:00:00:00:00:00:00:00 to 20:FF:FF:FF:FF:FF:FF:FF
  2. from 192. 168.1.1 to 192.168.1.254
  3. from iqn.2020-c41i4p21y5a165.lab.ucs-00 to iqn.2020-ceiD1pj5y135-8.lab.ucs-FF
  4. from 00:0A:E6:3E:00:00 to 00:0A:E6:3E:00:FF

Answer(s): A



A storage administrator receives reports of network delays when database software attempts to access the storage array. The virtual machines that host the database software are installed on different rack servers connected to the Cisco UCS Fabric Interconnect domain. The existing SAN switches are connected to the Fabric Interconnects using two 8 Gb port-channel interfaces to connect the storage array. The storage administrator has decided to deploy iSCSI storage with four 10 Gbps interfaces connected to the Cisco UCS Fabric Interconnects.

Which deployment type resolves the problems with storage contention?

  1. iSCSI storage with Cisco UCS Fabric Interconnect in the virtual port-channel mode
  2. iSCSI storage with Cisco UCS Fabric Interconnect using an appliance port
  3. iSCSI storage appliance on Cisco UCS Fabric Interconnect uplink trunk port
  4. iSCSI storage appliance on Cisco UCS Fabric Interconnect in the storage end-host mode

Answer(s): C



A network consultant reviews the requirements for the Storage Area Network (SAN) design. The proposed solution must offer a very efficient port usage and eliminate the need for a separate physical layer of switches and their associated ISLs. The design is not expected to require future expansion.

Which SAN topology must be used to meet these requirements?

  1. core-edge
  2. collapsed-core
  3. core-distribution-access
  4. edge-core-edge

Answer(s): A



A network architect designs the iSCSI-based storage area network solution. The iSCSI datastore must be designed with high availability, minimal downtime, and no single point of failure. The requirement is to fail over I/O to alternate paths based on SCSI sense codes without reliance on network failures.

Which feature must be deployed to meet these requirements?

  1. hardware-based flow control
  2. port security
  3. iSCSI multipath
  4. NIC teaming

Answer(s): C



Viewing page 6 of 42
Viewing questions 26 - 30 out of 306 questions



Post your Comments and Discuss Cisco 300-610 exam prep with other Community members:

Join the 300-610 Discussion