Cisco
CompTIA
ISC
EC-Council
EXIN
Fortinet
ITIL
Juniper
Microsoft
VMware
Avaya
SAP
Google
NVIDIA
Salesforce
Amazon
Palo Alto Networks
ISC2
Splunk
ServiceNow
All Vendors
  2. Home
  3. Exams
  4. Cisco
  5. 300-610

Cisco 300-610 Exam
Designing Cisco Data Center Infrastructure for Traditional and AI Workloads (Page 7 )

Updated On: 1-Feb-2026
Page 7 of 42
PDF with 306 Questions

Refer to the exhibit.



Server 1 fails to connect to the storage array over the Storage Area Network (SAN) of the Cisco NDS 9000 Series Switch. The requirements are to redesign the storage network and keep these considerations in mind:

The traffic from each of the server must be redundant and isolated.

The design must tolerate hardware and software failures and upgrades of SAN fabric devices.

Which action must be taken to meet these requirements?

  1. Enable NPV and F-Port-channel on ports that face Server 1 on the Fibre Channel switch to create redundant paths.
  2. Create a SAN port channel that faces the storage device to sustain a link failure.
  3. Add an additional supervisor to the Fibre Channel switch to support nondisruptive upgrades.
  4. Place an additional Fibre Channel switch to create two physically independent storage fabrics.

Answer(s): D



An engineer is implementing a storage area network where an NPV is used. The engineer notices that the servers in a storage farm are experiencing heavy traffic contention. The engineer needs to migrate traffic from heavily loaded server interfaces to interfaces with less load.
When the new links are deployed, the existing traffic is not rebalanced as expected.
Which feature must be used to meet these requirements?

  1. NPIV
  2. multiple VSAN support
  3. DVM
  4. disruptive load balancing

Answer(s): A



A customer needs a design for a new data center network that meets these requirements:

Logically partition the environment into separate security domains.

Cut costs related to purchasing additional equipment.

Separate routing processes, TCAM, QoS tables, and data planes.

Which technology must be used?

  1. VLAN
  2. vPC
  3. VDC
  4. VRF

Answer(s): C



A company has several data centers around the world that must be interconnected over Layer2. The service provider supports MPLS services to all the locations. The proposed solution must be vendor agnostic and scalable enough to support the rapid growth of the company.
Which data center technology is recommended to achieve this goal?

  1. OTV
  2. VXLANEVPN
  3. FabricPath
  4. EoMPLS

Answer(s): A



A network consultant evaluates the Cisco UCS Fabric Interconnect SAN configuration, which must meet these requirements:

All traffic must pass over the upstream device for switching and domain IDs must be preserved in the fabric.

Each server should be pinned to one designated upstream interface and for the traffic to pass through the pinned port.

Which Fabric Interconnect SAN operational mode meets these requirements?

  1. end host
  2. switch
  3. NPIV
  4. Fibre Channel

Answer(s): A



Viewing page 7 of 42
Viewing questions 31 - 35 out of 306 questions



Post your Comments and Discuss Cisco 300-610 exam prep with other Community members:

Join the 300-610 Discussion