support@Free-Braindumps.com
Register Login
Cisco
CompTIA
ISC
EC-Council
EXIN
Fortinet
ITIL
Juniper
Microsoft
VMware
Avaya
SAP
Google
NVIDIA
Salesforce
Amazon
Palo Alto Networks
ISC2
CrowdStrike
Anthropic
All Vendors
  1. Home
  2. Exams
  3. Cisco
  4. 300-615

Free 300-615 Exam Braindumps
Troubleshooting Cisco Data Center Infrastructure (DCIT) Questions 91–95 (page: 20)

Updated On: 10-Feb-2026
Page 20 of 51
PDF with 291 Questions

Refer to the exhibit. A network engineer finds one of the fabric interconnects offline when connecting L1 and L2 ports on both fabric interconnects. Which action resolves the issue?

  1. 1. Connect to Fabric Interconnect B.
    2. Verify the cluster status and HA election.
    3. Validate Fabric Interconnect B hardware issues.
  2. 1. Connect to Fabric Interconnect A.
    2. Verify the cluster status and HA election.
    3. Validate Fabric Interconnect A hardware issues.
  3. 1. Connect Fabric Interconnect B and change the role to primary.
    2. Reboot Fabric Interconnect B.
    3. Add the Fabric Interconnect A as subordinate fabric to the cluster.
  4. 1. Connect Fabric Interconnect B and execute ‘Erase configuration’
    2. Reboot Fabric Interconnect B.
    3. Add the subordinate Fabric Interconnect to the cluster.

Answer(s): D



Refer to the exhibit. A network engineer upgrades the firmware of a Cisco Fabric Interconnect from boot flash. During the process, the fabric interconnect reboots and displays the message shown in the exhibit. Which action resolves the issue?

  1. Remove the service pack and upgrade through the auto-install procedure
  2. Reset the I/O module and install the firmware image from the boot flash
  3. Boot the kickstart image from boot flash and load the system image
  4. Reload the switch and boot the kickstart image from the TFTP server

Answer(s): D



Refer to the exhibit. A Cisco UCS B-Series Blade Server is configured to boot from a shared storage via an iSCSI network. When a service profile is associated with the blade, the blade fails to attach the LUN. Which action resolves the issue?

  1. Place VLAN 0 on the interface that connects to the storage
  2. Register the blade as an initiator on the storage array
  3. Implement a Layer 3 connection between the blade and the storage
  4. Establish a Layer 2 connection between the blade and the storage

Answer(s): D


Reference:

https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-manager/116003- iscsiucs-config-00.html



Refer to the exhibit. A network engineer is implementing a Cisco UCS environment. The environment consists of eight servers configured with the same service profile template and Windows 2012 installed. The VFC interfaces of five of these servers are showing the error shown in the exhibit. Which action resolves the issue?

  1. Modify the vHBAs name in the storage connectivity policy
  2. Configure upstream zoning
  3. Decommission and recommission the servers
  4. Modify the boot order in the boot policy

Answer(s): A



Refer to the exhibit. A client configures an upgrade of its Cisco Nexus switches that are connected to the Cisco ACI controller, such that the switches are upgraded one at a time. After the upgrade is run, it is discovered that both Cisco Nexus switches were upgraded simultaneously. Which two actions ensure that the switches upgrade one at a time? (Choose two.)

  1. Configure the ‘Do not pause on failure and do not wait on cluster health’ Run Mode
  2. Choose the ‘Pause upon upgrade failure’ Run Mode
  3. Select the ‘Graceful Maintenance’ checkbox
  4. Place each leaf switch in a different upgrade group
  5. Check the ‘Ignore Compatibility’ checkbox

Answer(s): B,D


Reference:

https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ts/guide/UCSTroubleshooting/UCSTroubleshooting_chapter_0100.html



  PDF
Viewing page 20 of 51
Viewing questions 96 - 100 out of 291 questions


Post your Comments and Discuss Cisco 300-615 exam prep with other Community members:

AI Tutor AI Tutor 👋 I’m here to help!