What is required for using Puppet in a Cisco NX-OS environment?
Answer(s): D
Puppet agents cannot run natively on Cisco Nexus 7000 and Cisco Nexus 7700 switches. Instead, they run in a special virtual environment called the Open AgentContainer (OAC).
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus7000/sw/programmability/guide/b_Cisco_Nexus_7000_Series_NX-OS_Programmability_Guide/b_Cisco_Nexus_7000_Series_NX-OS_Programmability_Guide_chapter_01001.pdf
Refer to the exhibit.Why does the Python code for Cisco NX-API print an error message?
Commands that belong to different message types should not be mixed. For example, show commands are cli_show message type and are not supported in cli_conf mode.
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus7000/sw/programmability/guide/cisco_nexus7000_programmability_guide_8x/b- cisco-nexus7000-programmability-guide-8x_chapter_011.html
Which two components should be checked when a Cisco Nexus 9000 Series Switch fails to boot using POAP? (Choose two.)
Answer(s): B,E
PowerOn Auto Provisioning (POAP) automates the process of upgrading software images and installing configuration files on devices that are being deployed in the network for the first time.When a device with the POAP feature boots and does not find the startup configuration, the device enters POAP mode, locates a DHCP server, and bootstraps itself with its interface IP address, gateway, and DNS server IP addresses. The device also obtains the IP address of a TFTP server and downloads a configuration script that enables the switch to download and install the appropriate software image and configuration file.
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/fundamentals/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_Fundamentals_Configuration_Guide_7x/b_Cisco_Nexus_9000_Series_NX-OS_Fundamentals_Configuration_Guide_7x_chapter_0100.html
A POAP-enabled Cisco Nexus switch will not enter POAP mode.Which two conditions should be verified? (Choose two.)
Answer(s): A,B
POAP configuration guidelines and limitations are as follows:* The Cisco Nexus switch software image must support POAP for this feature to function.* POAP does not support provisioning of the switch after it has been configured and is operational. Only auto-provisioning of a switch with no startup configuration is supported.
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus7000/sw/fundamentals/config/cisco_nexus7000_fundamentals_config_guide_8x/Using_PowerOn_Auto_Provisioning.html
An engineer enters these commands while in EEM on a Cisco Nexus 9000 Series Switch event manager applet Backup-config event timer watchdog time 1800 name timer event cli match "copy running-config startup-config"What is the result of applying this configuration?
See below for an example of the outcome:SwitchA# sh ver | inc image -NXOS image file is: bootflash:///nxos.7.0.3.I7.10.binSwitchA# conf t -Enter configuration commands, one per line. End with CNTL/Z.SwitchA(config)# event manager applet Backup-configSwitchA(config-applet)# event timer watchdog time 1800 name timerConfiguration accepted successfullySwitchA(config-applet)# event cli match "copy running-config startup-config"SwitchA(config-applet)# end -SwitchA# copy running-config startup-config% Command blocked by event manager policy
Post your Comments and Discuss Cisco 350-601 exam prep with other Community members:
Our website is free, but we have to fight against AI bots and content theft. We're sorry for the inconvenience caused by these security measures. You can access the rest of the 350-601 content, but please register or login to continue.