Cisco 350-601 Exam Prep
Implementing and Operating Cisco Data Center Core Technologies (DCCOR) (Page 40 )

• Help the team identify the causes of delays.
• Encourage continuous improvement through retrospectives.
• Support the team in changing its process, tools, or collaboration methods.
• Help remove impediments that the team cannot resolve independently.

• A: An impediment log may help, but simply maintaining it does not ensure the impediments are resolved.
• B: Directing the team to solutions conflicts with agile self-management.
• C: Adding impediments to the product backlog could delay their resolution and treats them like product features.

• Exploitability
• Attack complexity
• Required privileges
• User interaction
• Impact on confidentiality, integrity, and availability

• CVE: Identifies and tracks a specific vulnerability; it does not primarily measure severity.
• OSINT: Open-source intelligence gathered from publicly available sources.
• SOAR: Security orchestration, automation, and response technology used to automate security workflows.

• Password spraying: Tries a few common passwords against many accounts; no indication of repeated login attempts.
• Remote-access Trojan (RAT): Could install malware, but it does not explain how the attacker obtained the administrator’s credentials.
• Dictionary attack: Tries words or common passwords against an account; again, the scenario specifically highlights Telnet’s lack of encryption.

• 800 devices ? a scalable, centralized solution is needed.
• Four hardware/vendor classes ? the tool must handle different drivers and images.
• Two user groups ? it should allow different configurations for each group.
• “Distribute custom images” ? an imaging/deployment tool is required, not just a file-copy utility.

• Árvores de decisão: usam regras sequenciais, como “se característica X > valor, siga para este ramo”. São fáceis de visualizar e explicar. Atendem bem a problemas de classificação e regressão com alta interpretabilidade.

• Regressão linear: prevê um valor numérico contínuo, como preço, custo ou temperatura. Não é a escolha principal para classificar genes em categorias.

• Regressão logística: calcula a probabilidade de uma categoria. Pode atender à classificação, inclusive multiclasses, mas sua explicação costuma ser menos intuitiva que uma árvore para documentar decisões.

• Redes neurais: atendem a tarefas complexas, como imagens, texto e padrões não lineares. Porém, são menos interpretáveis, funcionando mais como uma “caixa-preta”.

• The VPN gateway is in VirtualNetworkA.
• Gateway transit is configured on the peering associated with the VNet that contains the gateway—here, VirtualNetworkA.
• A peered VNet may use the remote gateway through the appropriate peering option, but this does not automatically update an existing P2S client’s routes.
• The Windows 10 workstation’s P2S VPN client package was created before VirtualNetworkB was peered, so it may not have a route for VirtualNetworkB.

• Microsoft Teams: Connects to Teams-related data, but it isn’t the primary connector for the Power Apps data tables.
• Personal Analytics: Provides personal productivity insights, not application data.
• SQL Server database: Only applies if the app explicitly uses SQL Server as its data source.
• Dataflows: Used for preparing and centralizing data, not as the normal direct connection to a Power Apps app.

• Tactics: The attacker’s overall goal, such as gaining persistence or exfiltrating data
• Techniques: The methods used to achieve that goal
• Procedures: The specific implementation or sequence of actions

• IP addresses and hash values: Useful indicators, but they can change quickly.
• Indicators of compromise: TTPs may help identify IOCs, but their main value is describing behavior.
• Tools: Attackers can replace tools or use legitimate administrative utilities.

1. Start with the 48-bit MAC address.
2. Split it into two 24-bit halves.
3. Insert FF:FE between the halves, creating a 64-bit value.
4. Invert the U/L bit—the seventh bit from the left in the first MAC byte.

text 
MAC:       00:1A:2B:3C:4D:5E 
EUI-64:    02:1A:2B:FF:FE:3C:4D:5E

• FE80 is the prefix commonly used for an IPv6 link-local address, not part of the EUI-64 interface ID.
• The interface ID is not random.
• The MAC address is modified by inserting FF:FE and changing the U/L bit.

• Secret scope: A named container that groups related secrets and defines access permissions. Example: finance-prod.
• Secret key: The name of an individual secret stored inside that scope. Example: db-password.

text 
Scope: finance-prod 
  Key: db-username 
  Key: db-password

python 
dbutils.secrets.get( 
    scope="finance-prod", 
    key="db-password" 
)

• Data loss prevention (DLP): Helps detect or prevent unauthorized data transfers, but does not directly protect data on a stolen, powered-off laptop.
• Operating system hardening: Reduces vulnerabilities and attack surface, but does not adequately protect stored data if the device is stolen.
• Boot security: Helps prevent unauthorized operating systems or boot media from loading. It supports device security but is not the primary solution for protecting the data itself.

1. Determine which host was infected first—the originating host.
2. Decide whether each other host is clean or infected based on communication and event logs.

• Compare timestamps and find the earliest suspicious event.
• Look for the host that initiated the malicious connection, file transfer, exploit, or command—not merely a host that later received traffic.
• Follow the timeline through the firewall:

• A host is likely infected if it both receives suspicious activity and then initiates related malicious traffic.
• A host may be clean if the firewall blocked the connection and there is no evidence of execution or follow-on communication.

• A larger question bank with verified answers
• Explanations tied to ISACA exam domains
• Current content aligned with the exam blueprint
• Useful review or progress features

• Replace the keyboard: More expensive and unnecessary before simpler causes are ruled out.
• Replace the key switch: Laptop keyboards generally aren’t designed for individual switch replacement.
• Replace the circuit board: Excessive for a single nonworking key and not a cost-effective first step.

• Forecasting lets sales leaders predict revenue for upcoming fiscal periods, compare forecasts with targets, and review performance by salesperson or team.
• Opportunity Stages help determine the likelihood that opportunities will close. Each stage can have a probability, which contributes to forecast calculations.

• Sales Quotes: Used to present pricing or product proposals to customers; they do not provide revenue forecasting.
• Opportunity List View: Helps users filter and view opportunities, but it is not the forecasting tool.

• Reviewing and validating generated code
• Checking security, licensing, and quality concerns
• Testing the implementation
• Making the final design and coding decisions

• A: Copilot is not a complete replacement for developers.
• C: Human input, review, and oversight are still required.
• D: Copilot Chat supports many tasks beyond debugging, including explanation, generation, refactoring, and testing assistance.

bash 
docker run -it microsoft/azure-cli:0.10.17

• docker run starts an Azure CLI container; it does not automatically connect to the AKS cluster.
• The command does not run kubectl apply.
• The container would need the appropriate Kubernetes tools and AKS credentials.
• The device or container must obtain cluster credentials, typically using an AKS credential command, before running Kubernetes commands.

bash 
az aks get-credentials --resource-group <resource-group> --name <aks-cluster> 
kubectl apply -f myapp.yaml

• A: Allow SAN certificates — SANs are used to identify valid hostnames in a certificate. They do not bypass trust validation.
• C: Open the secure LDAP port — A blocked port would normally cause a timeout or connection-refused error, not certificate errors.
• D: Increase the TLS version on the RA — The issue concerns certificate trust, not the organization’s registration authority.

• Detect risky sign-ins from unfamiliar or unidentified IP addresses
• Evaluate user or sign-in risk
• Automatically require a password change because of a risky sign-in

• User risk policy: Can require a user to securely change their password when the account may be compromised.
• Sign-in risk policy: Can require MFA or block access based on the risk of a particular sign-in.

• User preferences change, so the model must learn from recent data.
• Keeping the existing data helps preserve knowledge of older patterns and provides a broader training distribution.
• Training only on new data can cause catastrophic forgetting and may overfit if the new dataset is small.
• The new data should not automatically be used as the test set, because it is needed for training and the model must still be evaluated on separate, representative data.

• A is correct: Days beyond the included period incur an extra daily charge.
• D is incorrect: Daily use after 10 days is not free.
• B and C: Data-transfer pricing can depend on the direction and service terms. The exam’s intended distinction is that the included device usage period is the clearly stated no-cost benefit.

• MAC flooding: Overwhelms a switch’s MAC address table, potentially causing traffic to be broadcast.
• DNS spoofing: Provides false DNS responses to redirect users.
• ARP poisoning: Sends false ARP information to associate an attacker’s MAC address with another device’s IP address.

• Azure Cosmos DB is a globally distributed NoSQL database service. It stores and retrieves application data, but it does not provide the tools needed to build, test, and deploy predictive analytics models.
• Azure Machine Learning—including the historical Azure Machine Learning Studio—is designed for the machine-learning lifecycle:

• Issuer: Identifies the party issuing a SAML message, commonly the IdP in the SAML assertion. It is not the Salesforce setting used to distinguish Salesforce from other service providers.
• Identity Provider Login URL: Specifies where Salesforce sends users for authentication; it does not identify Salesforce.
• SAML Identity Location: Specifies where the user identity is found in the SAML assertion, such as the subject or an attribute.

• Accept: Acknowledging the risk without taking additional action.
• Transfer: Shifting responsibility or financial impact to another party, such as through insurance or outsourcing.
• Mitigate: Reducing the likelihood or impact of the risk through controls.
• Avoid: Eliminating the activity or condition that creates the risk.

• Have a definite, clear objective (C): Know exactly what you want to communicate. A clear purpose reduces ambiguity and irrelevant information.
• Plan the communication (E): Decide what to say, who needs the information, the appropriate channel and the best timing.
• Seek feedback (F): Check that the receiver understood the message. This could involve asking for confirmation or inviting questions.

• Ask questions (A): Usually associated with the receiver checking or clarifying information, although a sender may use questions in practice.
• Give feedback (B): Feedback is generally the receiver’s response to the sender’s message. The sender’s responsibility here is to seek feedback.
• Consider their contribution (D): This is not a standard sender-focused step in the communication process. The sender should consider the receiver’s needs and perspective, but the wording is less precise than the three recognised actions above.

1. Create or verify cost groups

1. Set up the item model group

1. Create the costing version

1. Enter or calculate item costs

1. Activate the standard costs

• Espionage: Stealing information for intelligence or competitive purposes.
• Data exfiltration: Unauthorized removal or transfer of data.
• Nation-state attack: An attack sponsored or conducted by a government.
• Shadow IT: Technology or access methods used outside approved IT processes.

• Accept: Acknowledging the risk without taking additional action.
• Transfer: Shifting the risk’s impact to a third party, such as through insurance or outsourcing.
• Mitigate: Reducing the likelihood or impact of the risk through security controls.
• Avoid: Eliminating the activity or process that creates the risk.

Why

cmd 
PowerShell.exe -ExecutionPolicy Bypass -File C:\Scripts\ConfigureVM.ps1

Why the other options are less suitable

• GPO logon script: Runs only when a user logs on and may not run during initial VM provisioning.
• GPO startup script: Can work, but requires the VM to be joined to the domain and the policy to be applied. It is also normally evaluated at each startup.
• Place scripts in a VHD: Merely placing scripts on a disk does not cause them to execute.

• Open or insecure ports
• Enabled legacy or insecure protocols
• Known vulnerabilities and misconfigurations
• Weak services and outdated software

• curl tests web requests and HTTP-based services.
• Wireshark captures and analyzes network traffic; it does not normally scan servers for weaknesses.
• netcat can test connectivity to individual ports and sometimes grab service banners, but it is not a comprehensive vulnerability scanner.

• Reviewing security policies and standards checks whether controls are documented, not whether they work.
• Reviewing security logs may show that monitoring is occurring, but does not directly establish that preventive controls are effective.
• Analyzing technical security practices is broad and may assess implementation, but it is less objective than an actual controlled attack.

• Design/compliance effectiveness: policies, standards, and procedures
• Operational effectiveness: logs, records, and evidence that controls operate
• Technical security effectiveness: penetration testing or vulnerability testing

• Compensating control: The server is end-of-life, so it may no longer receive security patches or support. Placing it on a restricted VLAN provides an alternative layer of protection by reducing who can access it and limiting its exposure.
• Technical control: VLAN segmentation and access control lists (ACLs) are technology-based mechanisms that enforce network access restrictions automatically.

• Managerial: Policies, procedures, and governance—not network configuration.
• Physical: Locks, guards, or barriers.
• Corrective: Restores systems after an incident.
• Detective: Identifies suspicious activity rather than restricting access.
• Deterrent: Discourages behavior but does not enforce access rules.

• Compare each server’s drive specifications and performance data.
• Identify the drive that is faulty, slow, or mismatched.
• Replace it with a drive that matches the required interface, capacity, and performance characteristics.
• Avoid selecting a slower drive, because storage performance can bottleneck the entire server.
• In a redundant array, use a compatible replacement so rebuilding does not create unnecessary performance degradation.

• SAMLRequest: the SAML authentication request
• RelayState: the original destination or application state

• RedirectURL: not the standard SAML parameter for preserving the original request.
• DisplayState: not a standard SAML SSO parameter.
• StartURL: Salesforce-related terminology, but not the standard parameter used in this SAML exchange.

• Continuous deployment: Automates software releases; it does not specifically test input handling.
• Static code analysis: Examines source or compiled code without executing it. It can find coding flaws but does not directly stress the application with malformed inputs.
• Manual peer review: Developers inspect code or design manually. Useful, but not the best practice specifically for testing how a live product handles invalid input.

Correct choices

• DB1: Azure Data Box Heavy
• Virtual machines: Azure Migrate

Why

• Replication with minimal downtime
• A test migration
• Final cutover after validation

• Subject: The entity that initiates an action—here, Derrick/user account.
• Object: The resource being accessed— the file.
• Action: Reading the file.

• Input feature distributions differ from training data ? Analyze dataset drift metrics

• Model accuracy drops without code changes ? Analyze dataset drift metrics

• Endpoint latency increases under load ? Investigate scaling and infrastructure metrics

• B — AWS DataSync: Transfers data between storage systems, such as S3, file systems, and on-premises storage. It is not a marketplace or catalog for third-party datasets.
• C — Kinesis Data Streams and CodeCommit: CodeCommit is a source-code repository, not a third-party data provider. Kinesis is for streaming data ingestion.
• D — Kinesis Data Streams and ECR: ECR stores container images, not datasets. Kinesis does not provide access to ECR data as an external dataset source.

• The application failing to start or becoming unhealthy
• An incorrect probe path, port, or protocol
• The application needing more startup time
• Dependency or configuration failures
• A liveness probe being too aggressive

bash 
kubectl describe pod <pod-name> 
kubectl logs <pod-name> --previous

• Scale to more replicas: may hide the issue but does not diagnose it.
• Decrease initialDelaySeconds: makes probes run earlier and could worsen startup failures.
• Drain and reboot the node: node metrics are normal, so rebooting is not justified as the first step.

1. Find the subnet-mask increment in the octet where the prefix ends.
2. Identify the network address by finding the subnet boundary at or below the given IP.
3. The first usable address is network address + 1.
4. The broadcast address is one address before the next subnet.
5. The last usable address is broadcast - 1.

• 172.28.228.144/18

• 172.28.228.144/23

• Idioma: “Responda em português.”
• Tamanho: “Responda em até três frases.”
• Formato: “Use uma lista com três recomendações.”
• Objetivo: “Recomende produtos com base nas necessidades do cliente.”

• Mudar o tamanho do LLM: pode alterar capacidade e custo, mas não garante idioma ou respostas curtas.
• Aumentar a temperatura: aumenta a criatividade e a aleatoriedade; não controla diretamente o tamanho ou idioma.
• Aumentar o Top K: permite considerar mais tokens prováveis, aumentando a variedade; também não é o mecanismo principal para controlar idioma ou comprimento.

• Managerial: policies, standards, risk management, governance
• Operational: procedures carried out by people, such as training, incident response, and backups
• Technical: firewalls, encryption, access-control systems
• Physical: locks, guards, cameras

text 
interface GigabitEthernet0/0.10 
 encapsulation dot1Q 3

• .10 is the router’s local subinterface number.
• dot1Q 3 identifies the 802.1Q VLAN tag carried on the trunk.

text 
interface GigabitEthernet0/0.3 
 encapsulation dot1Q 3

text 
interface GigabitEthernet0/0.2 
 encapsulation dot1Q 2

• You normally do not create a new sensitive information type for credit card numbers. Microsoft Purview already provides a built-in Credit Card Number sensitive information type.
• The required sequence should generally be:

• The identified risk
• Its likelihood and potential impact
• The person or team responsible for handling it
• The response or treatment plan
• Risk thresholds, such as when escalation or action is required
• Current status and review dates

• Risk tolerance: The amount of risk an organization is willing to accept; it is a concept or limit, not usually the primary documentation.
• Risk transfer: Moving the responsibility or financial impact of a risk to another party, such as through insurance.
• Risk analysis: The process of evaluating risk likelihood and impact.

• Workspace: Stores notebooks, libraries, jobs, and other project resources.
• Notebooks: Interactive documents containing code, queries, visualizations, and explanations. Common languages include Python, SQL, Scala, and R.
• Clusters: Groups of virtual machines that run Spark workloads. Clusters can be started, stopped, and automatically scaled.
• Data access: Databricks can read from services such as Azure Data Lake Storage, Azure Blob Storage, and Azure SQL.
• Jobs: Automate notebooks or data-processing workflows on a schedule or in response to events.