Cisco 350-901 Exam Actual Questions
Developing Applications using Cisco Core Platforms and APIs (DEVCOR) (Page 26 )

• The missing piece is to configure an event source mapping between the DynamoDB stream and the Lambda function. Enabling DynamoDB Streams alone doesn’t trigger the function—you must wire the stream to Lambda so events invoke the function.
• Note that changing StreamViewType (A) only affects what data is delivered (e.g., NEW_IMAGE) and does not trigger invocations. Options C and D are not required for invocation: you don’t need SNS, and increasing the timeout won’t enable the trigger.

• The answer: Question 51: C — Request trigger.

• To invoke a Logic App from an external service (here, the Azure Application Insights availability test) you need a trigger that starts on an incoming HTTP request. In Logic Apps, this is the trigger that exposes an HTTP endpoint — typically shown as "When a HTTP request is received" and referred to as the Request trigger.
• The other options aren’t appropriate:

• Create a Logic App with the Request trigger to generate a URL.
• Configure Application Insights to post the degraded-availability payload to that URL.
• Add actions (e.g., send email, follow-up) in the Logic App to notify the customer services team.

Why B works

• AWS KMS keys are Regional resources. A normal customer managed key in Region A cannot be used directly in Region B.
• A customer managed multi-Region KMS key (MRK) has related key replicas in both Regions. The replicas share key material and key ID, although each has a Regional ARN.
• With client-side encryption, the application encrypts the data before storing it in S3. Cross-Region replication then copies already-encrypted objects, so S3 does not need to decrypt and re-encrypt them with a different Regional key.

Why the other choices are weaker

• A and C: SSE-S3 uses Amazon-managed S3 keys, not the required customer managed KMS key.
• D: SSE-KMS can work only if the solution creates and configures the appropriate KMS key or multi-Region key replica in each Region. As written, it says to create a customer managed KMS key in each Region, which implies separate keys—not the same KMS key. Replication also requires additional KMS permissions and destination encryption configuration.

• Answer: A) Clear the Windows event logs

• Windows event logs (System, Security, Application) are key forensic artifacts. If an attacker clears these logs, there’s no built-in local record of actions taken, making it harder for investigators to trace what happened.

• Modify the system time: may misalign timestamps but does not erase past events and can be easily detected.
• Alter log permissions: could prevent new log entries, but it doesn’t remove existing ones and can raise alarms due to permission changes.
• Reduce log retention settings: affects only future logs; it doesn’t wipe already recorded activity.

• In real environments, defenders mitigate this risk with tamper-evident, centralized logging (remote SIEM, write-once storage, log integrity checks) to preserve evidence even if a host is compromised.

• Multi-pass wipe: Overwrites the drive’s existing data multiple times, making recovery much more difficult while preserving the drive’s functionality.
• Single-pass wipe: May be sufficient in some modern sanitization standards, but is presented here as less secure than multiple overwrites.
• Degaussing: Uses a strong magnetic field to disrupt data. It can render the drive unusable or unreliable, reducing its resale value.
• Pinning: Is not an appropriate data-sanitization method.

• Correct answer: enable SLAAC on an interface (C)

• Why the other options are not correct:

• Strongest encryption algorithms: Choose the strongest available encryption and integrity options, typically AES with the largest key size and a secure integrity algorithm.
• Encrypt all traffic: Select tunnel mode rather than transport mode. Tunnel mode encrypts the entire original IP packet, which is appropriate for a site-to-site VPN between branch networks.
• Secret-password authentication: Configure a pre-shared key (PSK) on both VPN concentrators. The key must match at both ends.

• Correct answer: D.

• Why: In a service offering, a service action is the activity performed by the service provider to deliver or support the service. A service desk agent provides support to a user is the actual action.

• Why the others aren’t service actions:

• Step 1: From Power BI Desktop, select Get Data, choose Folder, enter the folder path, and click OK, then choose Transform data to open Power Query Editor.

• Step 2: In Power Query Editor, expand the Attributes column.

• Step 3: From the Power Query Editor, select the Content column and use Home > Combine Files (aka “Combine binaries”) to consolidate the files.

• You provision the virtual machine.
• You manage the guest operating system, applications, and configuration.
• Azure manages the physical servers, datacenter, and underlying virtualization infrastructure.

• Correct answer: only new data added to the eventhouse (option E).
• Why: When you enable OneLake availability for the eventhouse, OneLake starts syncing data going forward. It does not automatically backfill or copy over data that already exists in the eventhouse before the enablement.
• What that means in practice: Any data added to the eventhouse after you enable OneLake will appear in OneLake (and be visible from OneLake file explorer). Pre-existing data in the eventhouse stays there unless you perform a separate backfill/copy operation outside the standard OneLake enablement.
• How to verify: add a small new dataset to the eventhouse after enabling OneLake availability, then check OneLake to confirm the new dataset appears.

• What each role allows at the storage account scope:

• Why someone might say it’s not correct in this question:

• Practical takeaway:

• Control plane: Managed by Databricks and contains the Databricks web application, workspace services, cluster management, and job orchestration.
• Data plane: Runs in your cloud account and contains compute resources such as:

• Worker node: Data plane compute.
• Driver node: Data plane compute.
• JDBC data source: Usually an external data system.
• Databricks Filesystem (DBFS): Provides storage access and is backed by cloud object storage rather than being entirely part of the control plane.

• The correct answer: B) Synthetic identity theft.

• Synthetic identity theft involves creating a new, forged identity by combining information from multiple real people (e.g., names, dates of birth, SSNs) to commit fraud.
• In the scenario, Adam “created a new identity by obtaining information from different victims,” which matches the idea of synthesizing data to form a fake person.

• Medical identity theft: using someone’s medical information to obtain care or services.
• Tax identity theft: using someone’s personal info to file fraudulent tax returns.
• Social identity theft: impersonating someone to deceive others socially or publicly.

• Look for phrases like “create a new identity” or “combine information from multiple people” to identify synthetic identity theft.

• The correct answer is Mass Transfer Tool.

• The Mass Transfer Records tool is Salesforce’s built-in way to reassign ownership of existing records in bulk. In this scenario, you need to transfer ownership of the departed rep’s accounts and opportunities to a new rep while keeping the team structure intact.

• Go to Setup > Data Management > Mass Transfer Records.
• Choose the object: Accounts (and then Opportunities, if needed).
• Set “Transfer From” (the leaving rep) and “Transfer To” (the new rep).
• Decide whether to transfer related records as well (e.g., opportunities tied to accounts) and proceed.
• Review and confirm.

• Data Loader / Data Import Wizard are for bulk import/export, not bulk reassigning ownership.
• Dataloader.io is a third-party tool; the built-in Mass Transfer tool is the standard Salesforce method for this task.

• Honeypots: Decoy systems or services designed to attract attackers. Legitimate users should not access them, so activity on a honeypot is a strong indicator of unauthorized activity. Security teams can also observe attacker behavior.

• DNS sinkhole: Redirects requests for known malicious domains to a controlled internal server or blocks them. If an infected workstation attempts to contact command-and-control infrastructure, the sinkhole records the request and helps identify the compromised device.

• Tokenization: Protects sensitive data by replacing it with tokens.
• CI/CD: Automates software development and deployment.
• Threat modeling: Identifies potential risks before or during system design.
• Data obfuscation: Makes data harder to understand, but does not detect intruders.

• The requirement: the support plan must allow opening new support requests (technical support incidents).
• Azure’s Basic plan does not include technical support incidents—only billing/subscription support and access to community support.
• Therefore, you must choose a paid plan to open new technical support requests: Developer, Standard, Professional Direct, or Premier.

• Copilot??????????
• ???????????????
• ??????????
• ?????????????
• ???????????????????

• Prompts and Suggestions: Retained for 28 days
• User Engagement Data: Kept for Two Years

• Drop violating frames
• Log or alert on the violation
• Shut down or restrict the port

• Load balancer: Distributes application traffic; it does not control switch MAC learning.
• IPS: May detect some network attacks but is not the primary control for switch MAC-table exhaustion.
• NGFW: Protects traffic crossing network boundaries, while MAC flooding occurs at the switching/LAN layer.

• CAPWAP (Control And Provisioning of Wireless Access Points) creates a tunnel between the AP and the Wireless LAN Controller over the IP network. The AP and WLC communicate via this CAPWAP tunnel, which can traverse Layer 2 or Layer 3 networks.
• The AP does not have to be on the same switch as the WLC. It can connect to any switch in the network, as long as there is IP reachability between the AP and the WLC. This is why option D is correct.
• The other options are incorrect:

• Shadow IT describes employees using unsanctioned tools or methods to access systems, often without IT oversight (e.g., bypassing the VPN).
• Not A (Espionage): this implies external covert actors; here the activity is internal.
• Not B (Data exfiltration): there’s no explicit data transfer shown, just bypassing the VPN.
• Not C (Nation-state attack): this involves external political/strategic actors; not the internal behavior described.

• Implement policy and training to enforce approved tools.
• Use IAM, VPN enforcement, and network access controls to ensure only sanctioned access.
• Monitor for unsanctioned tools and provide secure, approved alternatives.

• Le rôle n’a pas de clés propres. Des identifiants temporaires (via STS) sont émis lorsque quelqu’un ou quelque chose « assume » le rôle.
• La trust policy déclare qui peut assumer le rôle (par ex. une instance EC2, un utilisateur IAM, ou un service comme Lambda).
• Une fois attaché à une ressource (par exemple comme un instance profile sur une EC2), l’application peut appeler les services AWS avec les permissions du rôle.

• Respect du principe du moindre privilège: on accorde uniquement ce qui est nécessaire.
• Pas de stockages de clés sur les instances; les credentials se renouvellent automatiquement.

• Rôles pour EC2, rôles pour Lambda, accès cross-compte, etc.

• Basic: Self-help only; no technical support or design assessment.
• Developer/Standard: Technical support, but generally not the full proactive architecture guidance required here.
• Professional Direct: Includes proactive guidance and architecture recommendations.
• Premier: Also supports this, but is not the minimum-cost option.

• A single Construction Job can use multiple Machinery records.
• A single Machinery record may be used on multiple Construction Jobs.
• This is a many-to-many relationship, which Salesforce models using a junction object.
• The junction object can contain fields such as:

• Master-detail to Machinery
• Master-detail to Construction Job
• Date and cost fields

• Permanent table (E): Correct. A dropped permanent table can be restored with UNDROP TABLE during its Time Travel retention period. Permanent tables also have Fail-safe protection.
• Transient table: It can also generally be restored during its shorter Time Travel period, although it has no Fail-safe. Therefore, excluding it makes the question questionable.
• Temporary table: Usually cannot be recovered after it is dropped; its lifecycle is limited to the session.
• Materialized view (D): The answer key treats it as recoverable, but recovery behavior depends on the specific Snowflake object/version capabilities. It should not be confused with an ordinary view.

• Correct answer: All four statements are true (A, B, C, and D). The given key (A,B) is likely incorrect.

• A) Customers can change the size of the Warehouse after creation — Yes. You can resize a virtual warehouse after it’s created using ALTER WAREHOUSE ... SET WAREHOUSE_SIZE.
• B) A Warehouse can be resized while running — Yes. Snowflake supports online resizing; you can change the size without stopping queries.
• C) A Warehouse can be configured to suspend after a period of inactivity — Yes. You can enable auto-suspend with a delay (AUTO_SUSPEND).
• D) A Warehouse can be configured to auto-resume when new queries are submitted — Yes. You can enable auto-resume (AUTO_RESUME) so a suspended warehouse automatically resumes on new queries.

• Example commands:

• Even if a warehouse is resizing or auto-suspending, queries will be queued and then executed once the warehouse has the appropriate capacity.

• What the scenario tests: How monitoring paths on a Universal Forwarder (UF) behave when you deploy an app via the Deployment Server.
• How monitoring is configured: Log paths to monitor are defined in inputs.conf (within apps/local on the UF). Splunk on the UF merges inputs from all apps and local config.
• Key point: Deploying a new app that adds a monitor for a log file does not typically remove existing monitors. The UF will continue monitoring any previously configured paths and will add the new ones from the deployed app.

• Correct answer: C) /var/log/maillog and /var/log/messages.

• Leadership and stakeholder commitment
• Business capability and skills
• Organizational culture
• Availability of resources
• Ability to manage and sustain change
• Impact of the proposed transformation

• How ready the organization is
• Which areas require urgent attention
• How difficult each issue may be to resolve
• Risks that could affect implementation

• A: Places the assessment in Phase B and refers vaguely to creating views; this is not the prescribed technique.
• B: An Implementation Factor Assessment and Deduction Matrix is not the primary TOGAF technique described for business transformation readiness.
• D: A Business Scenario helps identify requirements and stakeholder concerns, but it is not the main technique for assessing organizational readiness.

• Import mode loads the data into the Power BI model. Visuals query the in-memory model, which generally provides faster calculation and rendering than DirectQuery.
• Import mode also minimizes online processing because report interactions do not send queries back to the dataflow or SQL Server.
• A daily refresh can load data through the previous day, satisfying the freshness requirement without unnecessary hourly processing.

• DirectQuery keeps querying the data source or dataflow during report use, increasing online processing and potentially slowing visuals.
• Adding a gateway enables connectivity for on-premises sources, but it does not remove the performance disadvantages of DirectQuery.
• An hourly Power Automate refresh is unnecessary when the requirement is only data through the previous day and creates additional processing overhead.

• IaaS provides virtualized infrastructure, including VMs, disks, and networking. You manage the guest operating system and software installed on the VM.
• PaaS provides a managed platform for deploying applications without managing the underlying VMs or operating systems. Examples include Azure App Service and Azure Functions.

• The stage has a default file format defined (e.g., when you create the stage with FILE_FORMAT = (...)), and Snowflake will use that default.

• You use a named file format attached to the stage, or you specify an inline format in the COPY command, e.g., COPY INTO my_table FROM @my_stage FILE_FORMAT = (TYPE = 'CSV');

• Use a stage default: omit FILE_FORMAT in COPY.
• Or rely on a named/inline format: specify FILE_FORMAT in COPY or set a format on the stage.

• App Tag: a label that reflects the app’s enterprise readiness based on its Cloud Confidence Index (CCI) rating. It lets you quickly group apps (e.g., Poor, Average, Good) for policy decisions.
• App Score: a numeric value representing the CCI score. It provides a precise threshold you can use to enforce policies (e.g., block apps with Score below 50).

• You can create policies that block or restrict apps with a Poor App Tag or with an App Score under a chosen threshold.
• These two aspects let you filter cloud apps by CCI ratings during policy evaluation.

• CCL isn’t described as a real-time policy facet in this scenario.
• GDPR Readiness is a separate consideration and not the two CCI aspects used for real-time protection policy in this context.

• The standard Enterprise Architecture domains are: Business, Data, Application, Technology (BDAT).

• A: Business, strategy, application and technology — includes business and application/tech but uses “strategy” instead of data.
• B: Zachman, TOGAF, Cobit, and Heath architectures — names frameworks, not domains.
• C: Business, data, infrastructure and technology — has business, data, and technology; lacks a distinct application domain (uses “infrastructure” instead).
• D: Process, database, software and technology — covers data (database), application (software), and technology, but omits business.

• The four BDAT domains (business, data, application, technology) is the conventional model you should study.
• None of the options perfectly lists all four BDAT domains. The closest are C (if you map infrastructure to technology) and D (data/application/technology but no business).

• Coordinate and manage the assessment team
• Assign assessment activities
• Direct interviews, examinations, and tests
• Ensure the assessment follows the CAP

• Answer key: Lead Assessor — likely wrong
• CAP-based answer: C3PAO

• Answer: No.

• Why: Microsoft Managed Desktop (MD) is a managed service for end-user desktops (Windows devices used by people), not a service for provisioning, managing, or lifecycle-managing large fleets of virtual machines. It won’t help automate weekly creation and deletion of many VMs, especially with mixed OS (Windows and Linux).

• Relevant concept: To reduce administrative effort for rapidly provisioning and tearing down VMs, an Azure service like Azure DevTest Labs is appropriate. DevTest Labs lets you:

• Takeaway: The proposed solution (MD) does not meet the goal; the correct approach is to use a lab-oriented service such as Azure DevTest Labs for frequent, ephemeral VM deployments.

• The correct answer is D: All of the above.

• Snowflake Web Interface (UI): You can create and manage Virtual Warehouses from the UI (resize, suspend/resume settings, etc.).
• SQL commands: You can create and alter warehouses with DDL like CREATE WAREHOUSE and ALTER WAREHOUSE.
• Data integration tools: ETL/ELT tools can create/manage warehouses by connecting to Snowflake and issuing the appropriate commands or using their config to specify a warehouse.

• Review iteration length: Changing duration does not resolve unclear requirements.
• Limit work in progress: Useful when excessive multitasking is the problem, but it does not directly clarify requirements.
• Review individual performance: The issue is a process and backlog-quality problem, not necessarily an individual performance problem.

• Correct answer: D — use the same hashing algorithm as the sender's to create a numerical representation of the file.

• Integrity is verified by recomputing the hash on the received data and comparing it to the sender’s hash. This must use the same hash function; if you use a different algorithm, the digests won’t match even if the data is intact.
• The hash output is a fixed-length digest (a numerical representation). Whether you call it a “binary image” or a “numerical representation,” the key is that you generate the same type of digest with the same algorithm and compare them.

• A: same algorithm but the result is described as a binary image instead of a digest; you still compare the digest, but the phrasing is less precise.
• B/C: using a different algorithm would produce a different digest, causing false mismatch or failure to verify integrity.

• Correct choices: A and D.

• Why not B, C, or E?

• 25 — Traditional SMTP server-to-server mail transfer; not normally used for secure client submission.
• 110 — POP3, used to retrieve email and typically unencrypted.
• 143 — IMAP, used to access email and typically unencrypted.

1. Remote access to a Windows PC
2. Full chat and optional game-console functions

• Windows Remote Desktop (RDP) uses TCP 3389. The router needs a port-forwarding rule that sends incoming traffic on that port to the Windows PC’s internal IP address.
• The game console should connect through the wireless AP. Using WPA2-PSK provides the required wireless security while allowing normal online, chat, and optional services.
• The firewall should separate the internal network from the screened subnet. Its screened-subnet-side address is shown as 10.100.0.1.
• Devices must be placed in the correct network locations: the PC behind the router, the console on the wireless AP, and the firewall between the appropriate network segments.

cmd 
powershell.exe -ExecutionPolicy Bypass -File C:\Scripts\Configure-VM.ps1

• GPO logon script: Runs only when a user logs on, so configuration may be delayed and is user-dependent.
• GPO startup script: Can work, but requires the VMs to be domain-joined and introduces GPO dependency. It is not specifically tied to Windows deployment.
• Place scripts in a VHD: Merely makes the files available; it does not execute them.

• Residual neural network (ResNet): Primarily used for computer vision tasks such as image classification.
• Support vector machine (SVM): Commonly used for classification and regression, not natural-language query generation.
• WaveNet: Designed mainly for generating or modeling audio and speech.

• A separate scope using a /32 subnet: A /32 identifies one host, but it is not a practical DHCP scope for this purpose.
• A static IP within the DHCP range: This can cause an IP address conflict if DHCP assigns that address to another device.
• SLAAC: Used for automatic IPv6 address configuration, not for assigning a predictable IPv4 address through DHCP.

• In Microsoft Entra (Azure AD), admin roles can be scoped to either the entire directory (tenant) or to an Administrative Unit (AU). To assign a role at an AU scope, the user must be a member of that AU.

• Roles in question: Security Administrator and User Administrator can be scoped either to the Directory or to a specific AU.

• User1 is a member of AU1. Therefore, User1 can be assigned either at the AU scope (AU1) or at the Directory scope (global).

• User2 is not a member of AU1. Therefore, User2 cannot be assigned at the AU scope; the valid scope for User2 is only the Directory scope.

• User1: can be assigned at AU1 and at Directory scopes.
• User2: can be assigned only at the Directory scope.

• Answer: B — Improve employee training and awareness

• Why this is correct:

• Why the other options are less effective here:

• Quick practical note:

• The correct answer is A: CCTV recordings are not regularly reviewed.

• CCTV is a monitoring/control mechanism. If recordings aren’t reviewed, security events (break-ins, policy violations, equipment tampering) can go undetected and unaddressed.
• Regular review is essential for deterrence, incident response, and forensic evidence. Without it, the entire CCTV control provides little value.

• B (records deleted after one year) affects forensic availability, but it’s a data-retention issue rather than the ongoing effectiveness of the surveillance program.
• C (footage not recorded 24x7) creates gaps in coverage, which is a concern, but regular review of available footage still supports detection; 24x7 coverage is a separate policy/perimeter issue.
• D (cameras not in break rooms) is more about privacy and space planning than core data-center security monitoring.

• Server — provides services or resources
• Endpoint — a user device connected to the network
• Ethernet — a networking technology, not a filtering device
• Firewall — filters and controls traffic