College Board PSAT READING Exam Prep
Preliminary Scholastic Aptitude Test - Reading (Page 18 )

• The type of change: standard, normal, or emergency
• The risk, impact, and complexity
• The change model being used

• A standard change may be pre-authorized through its change model.
• A normal change may require assessment and approval by an appropriate change authority.
• An emergency change may be authorized by an emergency change authority, often using an expedited process.

• Change authorities are not only needed for emergency changes.
• They are not assigned only when a change is deployed.
• They are not only required for normal changes.

• Active-active routers: Provide redundant Internet connections/devices. Both can operate, so traffic can fail over or be load-balanced.
• Active-active firewalls: Avoid a single firewall becoming a failure point while maintaining security inspection.
• Load balancers: Distribute requests across multiple web servers. If one server fails, traffic can go to the other.
• Redundant power supplies: A server with separate power supplies should connect to independent power sources or circuits.
• UPS A and UPS B: Provide backup power and redundancy. Ideally, each power supply is connected to a different UPS.
• SONET ring: A ring topology provides alternate paths if a fiber link or segment fails.

• You can configure different pre-shared keys for different device groups.
• All cameras could use one key.
• All scanners could use another key.
• Each key can be associated with an appropriate role or access policy.

• Security controls
• Processes and procedures
• Compliance evidence
• Performance against contractual requirements

• Service-level agreement (SLA): Defines expected service performance, such as uptime and response times.
• Memorandum of agreement (MOA): Documents a general agreement between parties, but does not necessarily provide audit rights.
• Supply chain analysis: Identifies risks across suppliers and dependencies, but is not a contractual mechanism for reviewing vendor controls.

• Tokenization: Replaces the value with a nonsensitive token, often reversible through a secure token vault.
• Hashing: Converts data into a one-way fixed-length value, generally used for integrity checks or password storage.
• Obfuscation: A broad term for making data difficult to understand; it is less precise than masking in this context.

• A password cracker would normally be identified by behavior such as loading password hashes or attempting dictionary/brute-force attacks.
• The question describes a routine audit, not password recovery.
• Simply encountering a protected file during an audit is characteristic of a misconfigured or insufficiently privileged FIM.

1. Yes — Microsoft Foundry provides a secure, governed environment for building and managing generative AI applications and agents. It brings together models, data, tools, evaluation, deployment, and monitoring.

1. Yes — Foundry is designed for enterprise workloads and supports scaling AI applications as usage grows. Scalability comes from the underlying Azure services and managed infrastructure.

1. Yes — Foundry can be used in solutions involving image recognition and computer vision. Applications can use vision-capable models and Azure AI vision capabilities for tasks such as image analysis, object detection, and OCR.

• QuickVisualize is used to create and render a Power BI report from a DataFrame.
• The typical pattern is:

python 
PBI_visualize = QuickVisualize( 
    get_dataset_config(df), 
    auth=device_auth 
) 


PBI_visualize

• get_dataset_config(df) prepares the dataset configuration.
• auth=device_auth supplies authentication for the Power BI connection.
• Evaluating PBI_visualize renders the report in the notebook.

• Box 1: No
• Box 2: Yes
• Box 3: Yes

• Driver node: Coordinates Spark jobs and runs in the compute environment.
• Worker node: Executes tasks and processes data.
• Databricks Filesystem (DBFS): Provides storage access for data used by compute resources.

• B: Developer Edition has limited user, storage, and data-volume capacity, making realistic community testing difficult.
• C: A Developer Edition org cannot contain sandboxes, so it cannot provide separate environments for development, integration, and UAT.
• E: A standalone Developer Edition org is not part of the production org’s deployment path, so change sets cannot be used to deploy from it directly to that production org. The team would need Metadata API, Salesforce CLI, or another deployment method.

• B — Incorporate contextual output encoding/escaping: Encode untrusted data based on its context—HTML, attribute, JavaScript, or URL—so the browser treats it as data rather than executable code.
• D — Run untrusted HTML input through an HTML sanitization engine: Sanitization removes or neutralizes dangerous elements and attributes, such as script-related content, while preserving safe HTML where needed.

• A: Enabling client-side scripts does not prevent XSS. Script restrictions may reduce risk in some environments, but “enable” is not a general XSS control.
• C: Cookie inspection is unrelated to preventing injected scripts.
• E: The SameSite cookie attribute primarily helps mitigate CSRF, not XSS. It should not generally be described as an XSS prevention measure.

• Reporting relationships
• Organizational structures
• Leadership styles
• Team maturity
• Individual and group behavior
• Communication and motivation

• Acquire Project Team: Focuses on obtaining the people needed for the project.
• Develop Project Team: Focuses on improving team skills, relationships, and performance.
• Manage Project Team: Focuses on tracking performance, resolving issues, and managing changes within the team.

• A — Use getRecordTypeInfosByDeveloperName()

apex 
  Id rtId = Schema.SObjectType.Account 
      .getRecordTypeInfosByDeveloperName() 
      .get('Business_Account') 
      .getRecordTypeId();

• C — Query the RecordType object

apex 
  RecordType rt = [ 
      SELECT Id 
      FROM RecordType 
      WHERE SObjectType = 'Account' 
      AND Name = 'Business Account' 
      LIMIT 1 
  ];

• B: An outbound SOAP call is unnecessary and inefficient.
• D: Hardcoding an ID is not dynamic, and IDs can differ between orgs.

1. Wireless AP

1. Router

1. Firewall

1. Device placement

• Sets a high initial price for a new product.
• Targets customers willing to pay more, often called early adopters.
• Gradually reduces the price to attract more price-sensitive customers as the product becomes less novel and competition increases.

• Penetration pricing: starts with a low price to gain market share quickly.
• Premium pricing: maintains a high price to communicate superior quality or status; it does not necessarily involve later price reductions.
• Loss leader pricing: sells one product at a very low price, sometimes below cost, to attract customers who may buy other products.

• A. Periodically rotate responsibilities: May reduce some risks, but it does not directly detect unauthorized changes.
• B. Review segregation-of-duties conflicts: Identifies incompatible access combinations, not whether a specific data change was unauthorized.
• C. Log changes in an outside application: Logs provide evidence, but someone must review and analyze them. Logging alone does not detect misuse.
• D. Independent review: Directly detects unauthorized changes and reduces the risk that the person making the change can conceal it.

• Compute: Not used; no virtual warehouse is required.
• Data Storage: Not scanned again.
• Metadata: May help Snowflake manage and validate cached results, but it is not the Snowflake architectural layer identified as serving the request.
• Cloud Services: Handles query coordination, metadata services, authentication, and result-cache access.

• 255.255.255.128 = /25: 128 total, 126 usable
• 255.255.255.192 = /26: 64 total, 62 usable
• 255.255.255.224 = /27: 32 total, 30 usable
• 255.255.255.240 = /28: 16 total, 14 usable

• One for the network address
• One for the broadcast address

• 8 total addresses
• 6 usable addresses
• Mask: 255.255.255.248

• The selling division receives a credit based on a favourable transfer price, often market price or full cost plus a profit margin.
• The receiving division is charged a lower amount, such as marginal cost or another agreed price.
• The difference is accounted for centrally by head office or a corporate adjustment.

• desktopwidth:i:1280
• desktopheight:i:1024

• Connection information: Controls connection-related settings, not the desktop resolution.
• Scaling plan: Controls when session hosts start, stop, or scale based on demand.
• Session behaviour: Controls behavior such as disconnect or logoff handling.
• Display settings: Specifically controls RDP display properties, making it the appropriate choice.

CIMA P3 topics

• IT governance and systems strategy
• Systems development and implementation
• Change and project governance
• Strategic and business risk

• A — Plan for new systems: The committee should help identify and prioritise systems requirements and ensure planned systems support organisational needs.
• D — Consider competitive issues: New information systems may affect Y’s competitive position, service quality and efficiency. These strategic implications should be considered.
• E — Ensure the system meets company goals: This is a key governance responsibility. The committee should ensure the project remains aligned with Y’s objectives and delivers business value.

• B — Develop new systems: Detailed system development should be performed by IT specialists and project teams, not the steering committee.
• C — Manage the project: The project manager should handle day-to-day project management. The steering committee should provide oversight, challenge and key decisions, rather than manage daily activities.

• A — Tables
• B — Named file formats
• C — Schemas
• E — Databases

Why these are correct

• Tables: Can be cloned using CREATE TABLE ... CLONE. The clone initially uses zero-copy cloning, so storage is shared until changes are made.
• Named file formats: Can be cloned as database objects, preserving the file-format definition.
• Schemas: A schema and its eligible objects can be cloned.
• Databases: A database and its eligible schemas and objects can be cloned.

Why the others are incorrect

• Shares: A share is an account-level data-sharing object, not a normal cloneable database object.
• Users: Users are security principals and cannot be cloned with CLONE.

• Espionage: Stealing confidential information, often for a competitor or government.
• Data exfiltration: Unauthorized transfer of data outside the organization. This could occur, but the question focuses on using unapproved access methods.
• Nation-state attack: An attack sponsored or conducted by a government.
• Shadow IT: Employees using technology or access methods outside the organization’s approved security controls.

• Additional running costs: $800
• Less depreciation: $300

• The $100 reduction in fixed production overhead absorbed is only an accounting reallocation. It does not represent an actual saving in total fixed overhead.

• Distinct values = 69

• Unique values = 4

• Existing expected ROI: 15%
• New project ROI: 14%
• Cost of capital: 12%

• Project return = 14%
• Cost of capital = 12%
• It earns 2% more than the cost of capital, so it should increase shareholder value.

• state preserves the client’s original context, such as the specific idea URL the user requested.
• The portal sends that value in the OAuth authorization request.
• Salesforce returns it after authorization, allowing the portal to redirect the user to the original idea rather than the Ideas home page.

Recommended process

1. Access each switch’s terminal.
2. Use help to identify available commands.
3. Use the MAC table command, such as:

text 
   show mac-address-table

1. Use VLAN information, such as:

text 
   show vlan

1. Use interface information, such as:

text 
   show ip interface brief

1. Record each device’s:

• Relationship cardinality:

• Filter direction:

• Active versus inactive relationships: only active relationships automatically propagate filters.
• Blank or unmatched values: a fact-table value without a matching dimension row can create the model’s blank/unknown member.
• Uniqueness: the “one” side must contain unique values; duplicate keys generally belong on the “many” side.

• Amazon S3 as the origin for static content
• Application Load Balancer (ALB) as the origin for dynamic content
• Amazon Route 53 configured to point the company’s domain name to CloudFront

• /static/* ? S3 origin; cache content at edge locations
• Dynamic paths such as /api/* ? ALB origin; forward requests to the EC2 application

• Customer information must not be revealed ? PII Detection
• Malicious instructions embedded in images/documents must be blocked ? Prompt Shields

• If the question allows multiple selections, choose PII Detection and Prompt Shields.
• If it requires one selection specifically for the image-based threat, choose Prompt Shields.

sql 
ALTER TABLE dbo.DimCustomer 
ADD CONSTRAINT PK_DimCustomer 
PRIMARY KEY NONCLUSTERED (CustomerKey) 
NOT ENFORCED;

1. ALTER TABLE dbo.DimCustomer
2. ADD CONSTRAINT PK_DimCustomer PRIMARY KEY NONCLUSTERED (CustomerKey)
3. NOT ENFORCED

• A — Correct: Identify the data required by Salesforce, its dependencies, and how it should be validated. Verification scripts help confirm record counts, relationships, field mappings, and data integrity after migration.
• D — Correct: Use a full sandbox and perform trial migrations using realistic—or appropriately masked—legacy data. This exposes transformation, volume, dependency, and integration issues before production cutover.
• B — Less appropriate: Phased user migration and parallel operation primarily address user adoption and rollout risk, not the technical risks of data migration.
• C — Less appropriate: Although sandbox testing and integration testing are valuable, the option emphasizes test-data generation rather than validating the migration with representative legacy data. “A full sandbox for all systems” may also be impractical.

• Advanced Persistent Threat (APT): A sustained, targeted attack campaign or attacker group—not a vulnerability.
• Trojan: Malware disguised as legitimate software.
• Stealthware: A general term for malware designed to avoid detection; it does not specifically mean an unknown vulnerability.

• Annual interest payments net of tax relief (A): future cash outflows for the issuer.
• Redemption value (B): the final cash outflow when the bond is redeemed.
• Market value now (C): the cash proceeds received now, acting as the initial cash flow in the IRR calculation.

• A — Capacity: The system must handle all current records and anticipated future records. A system that cannot cope with volume will quickly become ineffective.
• C — Accuracy: Academic records are critical, so the new system must be at least as accurate as the existing system and comparable systems. Poor accuracy could cause serious administrative and reputational problems.
• D — Integration: Linking with the university’s financial systems supports consistency and avoids duplicate data entry, especially for registration, deregistration and fee-related transactions.

• B — Parallel running: This is a useful implementation and risk-control technique, but it is not an essential feature of the system itself. It may also be expensive and time-consuming.
• E — Internet access for all information: This creates significant confidentiality and security risks. External access might be needed for selected services, but unrestricted access to all information is not essential and would be inappropriate for student records.

• A. Remove rows where Sales[Status] is Canceled

• E. Remove Sales[Canceled Date]

• B: Removing Sales_Date would remove information users need—the date portion.
• C: Changing Delivery_Time to Integer could alter its meaning or precision and is not necessarily safe.
• D: Splitting the date/time column creates additional columns rather than simply removing unnecessary data.

• Dataset file: Use Import mode. Excel files are imported into Power BI, and the two Sales tables can be combined with Power Query.
• Report file: Use a live connection to the published dataset. This keeps the report separate from the dataset and avoids importing the data again.

• Report file: DirectQuery/live connection
• Dataset file: Import

• Lead investigator: Coordinates the investigation and directs the response.
• Information security representative: Provides security expertise and helps assess the incident.
• Technical representative: Preserves system evidence, takes forensic backups, and supports technical analysis.
• Legal representative: Advises on legal, regulatory, privacy, and evidence-handling requirements.

• Malware or malicious software
• Command-and-control tools
• Internet surveillance and intrusion software

• ITAR: A U.S. regulation controlling defense-related articles and services; it is not the international arrangement described.
• Palermo Convention: Focuses on transnational organized crime and related protocols, not export controls for cyber weapons.
• GDPR: European data-protection and privacy legislation.

• JobTitle: User1 and User3 only
• UsageLocation: User1, User2, and User3

• For a user whose source of authority is Windows Server Active Directory, attributes such as JobTitle are synchronized to Microsoft Entra ID. You must change them in on-premises AD; editing them in Entra ID is not allowed or will be overwritten.
• UsageLocation is a cloud-managed attribute used mainly for licensing and service availability. It can be set or changed in Microsoft Entra ID, including for synchronized users.

• Azure Cosmos DB is a globally distributed NoSQL database service. It stores and retrieves application data, but it does not provide the complete environment for building, testing, and deploying predictive analytics models.
• Azure Machine Learning is the appropriate service for this requirement. It supports creating experiments, training and testing models, and deploying them for predictions.
• Azure Machine Learning Studio provides the browser-based interface for these tasks.

• 25 — Traditional SMTP server-to-server mail delivery; often restricted and not the usual client submission port.
• 110 — POP3, used for retrieving email; normally unencrypted.
• 143 — IMAP, used for retrieving and synchronizing email; normally unencrypted.

• Marketing users: Dynamic Forms can show all fields.
• Support users: Field visibility rules can display only the Support preference fields on the record page.
• Reporting: Both profiles can still report on all fields because Dynamic Forms controls page visibility, not the underlying field access.

• A — Two record types and page layouts: Page layouts can control field placement and editability, but they are less flexible for conditional field visibility and would not be the best fit here.
• C — Muting permission set: Permission-set muting is used with permission-set groups; it does not conditionally hide fields on a page.
• D — Field-Level Security: FLS would remove field visibility at the security level. If fields are hidden by FLS, users generally cannot report on or access those fields, conflicting with the requirement that both users report on all data.

1. Append Table1 and Table2 as a new query

1. Select the product column in the appended query.

1. Choose Remove Rows > Remove Duplicates

• Technical platform interfaces: Important for integration and interoperability, but they should support—not drive—the architecture.
• Scalability of the network: Valuable as the organization grows, but a scalable solution is ineffective if it does not meet business or security needs.
• Development methodologies: Relevant to implementation, but they do not define the organization’s fundamental security requirements.

• Case Assignment Rules normalmente são avaliadas quando o caso é criado. Elas podem ser executadas novamente em uma edição somente se o usuário marcar “Assign using active assignment rules”; isso não acontece automaticamente apenas porque o caso foi fechado.
• Portanto, criar uma regra de atribuição não corrige os centenas de casos já fechados e não garante, por si só, que um caso será transferido antes de ser fechado.

• B — Usar uma ferramenta de dados: corrige os registros históricos já existentes, atualizando o Owner.
• D — Criar uma regra de validação: impede que um caso seja fechado enquanto ainda pertence a uma fila. Exemplo conceitual: se Status = Closed e o proprietário for uma fila, bloquear o salvamento.

• Unsafe images: Requires image/content moderation before the image is processed.
• Hidden instructions embedded in images: These are indirect prompt injections contained in untrusted image content or extracted text, not necessarily in the user’s typed prompt.

• Amazon EC2 instances — ???????? ?? ?? ??????? CPU, memory ??? instance size ???????? ???????
• AWS Lambda functions — memory configuration ?????????? ???????
• Amazon EBS volumes — volume type ?? size optimize ???? ???????
• ??????? ECS workloads — resource configuration ? cost optimization-?? ???????

• Memory ? compute usage ?????????? ???? custom code ????? ???? development ? maintenance ??????
• Cost allocation tags ???? ????? ??? ?????? ???? ??????? ???; inefficient resource ??????? ?? recommendation ???? ???
• CloudTrail resource ???? ?? API activity ??????, resource utilization ????