CSI IFC Exam Prep
Investment Funds in Canada (Page 19 )

• Input feature distributions differ from training data ? Analyze dataset drift metrics

• Model accuracy drops without code changes ? Analyze dataset drift metrics

• Endpoint latency increases under load ? Investigate scaling and infrastructure metrics

• Leaf switches provide access ports for servers, endpoints, and other devices.
• Spine switches form the fabric’s backbone.
• Every leaf connects to every spine, creating a predictable, high-bandwidth, low-latency path.

• A: Adding both a spine and leaf is unnecessary for simply adding access ports.
• B: Adding a spine does not directly provide endpoint access ports.
• D: A single connection to one spine creates a bottleneck and a single point of failure.

• Prevent connections to malware command-and-control servers
• Identify infected systems making those DNS requests
• Collect information for incident response

• A: Attackers do not normally use sinkholes to map a company’s domain structure.
• B: Redirecting employees from legitimate sites to attacker-owned sites describes malicious DNS manipulation, not a defensive sinkhole.
• D: Attracting attackers away from real resources is more closely associated with a honeypot or deception system.

• View/inspect configuration: Possible.
• Modify the installed application or its S-Controls: Typically restricted in a test-drive org.

• R-squared (R²): mede quanto da variação dos valores reais é explicada pelo modelo. É mais usado em regressão, não em classificação.

• Accuracy (acurácia): mede a proporção de previsões corretas em relação ao total. É adequada para a classificação de imagens da questão.

• RMSE (Root Mean Squared Error): mede o tamanho médio dos erros entre valores previstos e reais, penalizando erros maiores. É usado principalmente em regressão.

• Learning rate (taxa de aprendizado): controla o tamanho dos ajustes feitos pelo modelo durante o treinamento. Não é uma métrica de avaliação; é um hiperparâmetro.

• A — conformant: Incorrect because one explicit requirement is violated.
• B — consistent: “Consistent” is not sufficient where the implementation contradicts a mandatory specification. The RPC mechanism is covered by the architecture, and the implementation differs from it.
• C — consistent: Incorrect reasoning: the RPC mechanism does have a defined architectural requirement, so conformance must be assessed.
• D — non-conformant: Correct because the implementation fails to follow the specified RPC/threading requirement.

• Separate accounts/domains create a strong administrative boundary between non-production and production.
• Separate projects provide distinct IAM boundaries, billing, quotas, service accounts, and resources.
• Developers can receive permissions in the development project without automatically gaining access to production.
• Production administrators can be restricted from development resources, supporting separation of duties and least privilege.

• A: Creates excessive project fragmentation without being required by the stated requirement.
• C: Keeps development and production under one account and does not clearly separate administrative duties.
• D: Uses one account and only two projects; it provides some project isolation but weaker organizational separation.

• Reusing features across different models and teams
• Consistent feature definitions
• Managing feature versions and metadata
• Using features for both training and inference

• SageMaker Data Wrangler: Prepares and transforms data; it is not primarily a shared feature repository.
• SageMaker Clarify: Helps detect bias and explain model predictions.
• SageMaker Model Cards: Documents models, including intended use, risks, and evaluation results.

• Review the risk register.
• Use the previously defined risk response plan, such as assigning a backup resource, reprioritizing work, or using another qualified engineer.
• Implement the response promptly because the task is on the critical path.

• B: Revising the schedule without first applying the planned response may be premature.
• C: Excluding a required task could compromise the project’s objectives and requirements.
• D: Updating the risk and lessons learned records is appropriate, but it should happen after managing the immediate issue, not as the next primary action.

• Voice devices ? VLAN 10
• Data devices ? VLAN 20
• SVI for VLAN 10 ? 192.168.10.1
• SVI for VLAN 20 ? 192.168.20.1

• A: Describes a physical trunk interface, not an SVI.
• B: An SVI can provide management access, but that is not its primary definition here.
• D: SVI does not compensate for insufficient physical ports; it is a logical interface.

• Import — Loads data into Power BI. It requires a refresh, so it may not reflect changes within two minutes unless refresh is configured appropriately.
• Live connection — Connects to an existing Power BI semantic model or Analysis Services model; it is not the normal choice for connecting directly to an Azure SQL database.

Simple explanation

• The Azure VPN gateway to connect to
• Authentication settings
• Routes for networks that the client can access

• Geo-redundant storage (GRS) replicates data to a secondary Azure region, but the secondary copy is normally unavailable for read access.
• RA-GRS provides geo-replication and read-only access to the secondary region, satisfying all requirements.
• Zone-redundant storage (ZRS) replicates data across availability zones within the same Azure region, not separate geographic regions.
• Locally redundant storage (LRS) keeps copies within a single datacenter or region and does not provide geographic resiliency.

• netstat: Shows local network connections and listening ports, but not which WAN path carries the traffic.
• nslookup: Resolves domain names to IP addresses.
• ping: Tests reachability and latency but does not show the route.

• Vulnerability scanner: Finds technical weaknesses in systems, applications, or devices. It does not usually analyze the entire supply chain.
• Penetration test: Simulates attacks against a defined target to identify exploitable weaknesses. Its scope is narrower.
• SCAP (Security Content Automation Protocol): Provides standardized formats and methods for automating security configuration and vulnerability checks, rather than mapping the full supply chain.

• Store privileged credentials securely
• Grant the consultant only the access needed
• Provide temporary or time-limited access
• Rotate passwords automatically
• Record or monitor administrator sessions

• TACACS+: Centralizes authentication and authorization, commonly for network devices, but does not primarily provide password vaulting and privileged-session control.
• SAML: Enables web-based federation and single sign-on, not privileged credential management.
• SSO platform: Reduces the number of passwords users need, but does not necessarily protect administrative credentials or control privileged sessions.
• Role-based access control (RBAC): Assigns permissions based on job roles, but does not by itself prevent password sharing or securely broker administrator access.

• A: My Domain is required for many SSO configurations, but if SSO works, it is unlikely to be the cause of losing the target record.
• B: HTTP-POST is a valid SAML binding and does not inherently prevent redirection.
• D: An incorrect Federation ID generally causes authentication or user-matching failure—not successful login to the home page.

• Online payment fraud
• Account takeover
• Fake account creation
• Suspicious transactions

• Normalize casing in the data source—for example, convert all values to uppercase or lowercase.
• Add an index key to provide a unique, stable identifier for each row or value.

• GPU: A failure may cause no video output, but the PC usually still powers on.
• RAM: Can prevent booting or produce error beeps, but fans and power indicators generally work.
• CPU: Can prevent startup or booting, but it usually does not cause a completely lifeless system.

1. Create a custom Sensitive Information Type (SIT) in the Microsoft Purview portal.
2. Use a regular expression to match the 32-character alphanumeric account number.
3. Reference that SIT in the DLP policy protecting SharePoint Online.

• Format-based data ? custom SIT with RegEx
• Built-in sensitive data ? Microsoft-provided SIT
• Document classification/protection ? sensitivity labels
• Security investigation queries ? Advanced Hunting, not DLP detection

• Data lakes: scalable, low-cost storage for structured, semi-structured, and unstructured data.
• Data warehouses: reliable SQL analytics, governance, and performance features.

• Data lake: Primarily provides flexible, scalable storage but may lack warehouse-style reliability and governance.
• Data warehouse: Strong for structured analytics but less flexible for raw and unstructured data.
• All of these: The individual lake and warehouse do not, by themselves, unify the siloed architecture.

• A — Custom Button: A button can launch a flow, typically by passing the flow’s URL and record context.
• D — From a Process: A Process can invoke a flow using an Apex action configured for flow invocation. However, this is automation-triggered, not directly accessed by a user.
• B — Quick Action: In current Salesforce functionality, a Flow Quick Action can launch a screen flow directly from a record page. This makes B a valid modern method.
• C — Visual Workflow Launcher: This is not generally listed as a standard access method in current Salesforce terminology; Salesforce commonly uses the Flow component on Lightning pages instead.

• Disabling GPS: Affects location services, not email connectivity.
• Configuring 4G usage only: Does not enable international data access and could prevent connectivity if 4G is unavailable.
• Connecting using a hotspot: Could provide data, but it is not the most direct solution and depends on another network or device.

• Customer contains one row per customer and the customer’s Address ID.
• Address contains one row per address and the corresponding location details.

1. Select the Customer query.
2. Choose Merge Queries.
3. Match Customer[Address ID] with Address[Address ID].
4. Use a Left outer join so every customer is retained.
5. Expand the merged Address column and select City, State/Region, and Country.

• Append adds rows vertically and is used for tables with the same structure.
• Group By summarizes rows rather than adding related columns.
• Transpose switches rows and columns and does not establish a relationship.

• A: Using an external OAuth 2.0 identity provider could provide unified identity, but it does not specifically address Salesforce capacity or high-volume login limits.
• B: Making the Experience Cloud community a SAML identity provider and using JIT provisioning is a possible federation pattern, but it may not be appropriate for this scale without Salesforce validation.
• C: A default account is unrelated to solving identity unification and high login throughput. Person Accounts can be supported in appropriate B2C Commerce integrations.

• Exploitability
• Attack complexity
• Required privileges
• User interaction
• Impact on confidentiality, integrity, and availability

• CVE: Identifies and tracks a specific vulnerability; it does not primarily measure severity.
• OSINT: Open-source intelligence gathered from publicly available sources.
• SOAR: Security orchestration, automation, and response technology used to automate security workflows.