CWNP PW0-100 Exam Questions
PW0-100 Wireless LAN Administration, Certified Wireless Network Administrator (CWNA) (Page 2 )

Updated On: 21-Feb-2026

Which of these are NOT valid Service Set types as defined by the IEEE 802.11 standard?

  1. BSS
  2. IBSS
  3. ESS
  4. DSS

Answer(s): D

Explanation:

There are three types of Service Set: Basic Service Set (BSS), Extended Service Set (ESS), and Independent Basic Service Set (IBSS). (Reference: CWNA Study Guide, p. 218.)



Which of the following is true of RF propagation
communication?

  1. The range of RF transmissions increases with frequency.
  2. Low RF signal strength does not mean poor communications.
  3. Low signal quality does not necessarily mean poor communications.
  4. Due to the distances involved, sunspots do not affect RF communications.

Answer(s): B

Explanation:

1. The range of RF transmissions increases with greater transmitting power, not frequency.
(CWNA Study Guide, p. 261)
2. Low RF signal strength will propagating in short range. (CWNA Study Guide, p. 261)
3. Low signal quality might occur when the RF waves scatter on uneven surface. (CWNA Study Guide, p. 52)
4. CWNA Study Guide did not mention anything about the sunspots and its effects.



A point-to-point link between two buildings requires at least two of which device?

  1. Workgroup Bridge
  2. Access Point
  3. Wireless Bridge
  4. Ethernet Converter

Answer(s): A,B,C

Explanation:

Workgroup Bridge, Access Point, and Wireless Bridge with high-powered antennas can be used to establish a point-to-point link between two buildings. (CWNA Study Guide, Chapter 4: Infrastructure Devices)



Which type of the following are directional antennas? Select all that apply,

  1. Yagi
  2. Parabolic Dish
  3. Patch
  4. Omni
  5. Dipole
  6. Bipolar

Answer(s): A,B,C,E

Explanation:

Yagi and Patch Antennas are the samples of semi-directional antennas. Dipole antenna is an omni-directional antenna. Parabolic Dish is one type of highly directional antenna. (CWNA Study Guide, p. 136-142)



Which of the following can cause Multipath? (Choose three)

  1. Body of water
  2. Flat stretch of earth
  3. Metal roof
  4. Mountains
  5. Trees
  6. Concrete walls

Answer(s): A,B,C

Explanation:

Body of water, flat stretch of earth, and metal roof are considered to be smooth surface that can cause Multipath.


Reference:

should be Pages 394 & 400 CWNA Study Guide 3rd Edition or Pages 328 & 334 CWNA Study Guide 2nd Edition






Post your Comments and Discuss CWNP PW0-100 exam dumps with other Community members:

Join the PW0-100 Discussion