Free PW0-100 Exam Braindumps (page: 60)

Page 59 of 151

In the wireless LAN client utility software, which of the following functions may be configured? Select all that apply.

  1. Modulation type
  2. Connection speed
  3. Continuous Aware Mode
  4. Spanning Tree Protocol
  5. Bit ordering

Answer(s): B,C



Which option may be used as a wireless LAN security feature?

  1. Probe request frames
  2. Protocol filters
  3. Active scanning keys
  4. ATIM windows

Answer(s): B

Explanation:

Protocol filters (IP protocol, IP port, and Ether type) prevent or allow the use of specific protocols through the bridge's Ethernet and radio ports. You can set up individual protocol filters or sets of filters. You can filter protocols for wireless client devices, users on the wired LAN, or both. For example, an SNMP filter on the bridge's radio port prevents SNMP access through the radio but does not block SNMP access from the wired LAN.
IP address and MAC address filters allow or disallow the forwarding of unicast and multicast packets either sent from or addressed to specific IP or MAC addresses. You can create a filter that passes traffic to all addresses except those you specify, or you can create a filter that blocks traffic to all addresses except those you specify.
Reference:
http://www.cisco.com/univercd/cc/td/doc/product/wireless/aero1400/br1410/pscg15/p15filt.htm



Power over Ethernet (PoE) may be delivered to a wireless bridge by which of the following mechanisms? Select two.

  1. DC Voltage injector
  2. AC Line voltage injector
  3. Active Ethernet switch
  4. RF Injector module
  5. Over 2.4 GHz frequencies

Answer(s): A,C



What node is effectively cut off from communicating with the wireless network during Near/Far?

  1. Access point
  2. Far node
  3. Near node
  4. All nodes

Answer(s): B






Post your Comments and Discuss CWNP PW0-100 exam with other Community members:

PW0-100 Discussions & Posts