QUESTION: 9

Windows clients cannot connect using the fully qualified domain name when testing the connectivity of a newly created cluster.
What connection test identifies the problem?

DNS
NFS Mount
Mapping a Windows drive
WebUI using IP address

Answer(s): A

Explanation:

When Windows clients cannot connect to a newly created cluster using the fully qualified domain name (FQDN), but can connect using the IP address, it indicates a DNS resolution issue. Conducting a DNS connection test can help identify and resolve the problem.
Steps to test and troubleshoot DNS:
Verify DNS Configuration on the Cluster:
Ensure that the cluster's FQDN is correctly configured in the OneFS settings.
Check DNS Records:
Use the nslookup or dig command from a client machine to verify that the FQDN resolves to the correct IP address.
Example:

nslookup cluster.example.com
Inspect Client DNS Settings:
Confirm that the clients are using the correct DNS servers.
Update DNS Entries if Necessary:
If the FQDN does not resolve correctly, update the DNS zone files or entries on the DNS server.
Flush DNS Cache:
On the client machine, flush the DNS cache to remove outdated entries.

ipconfig /flushdns
Test Connectivity Again:
Attempt to reconnect using the FQDN to verify that the issue is resolved. By identifying that DNS is the root cause, appropriate steps can be taken to correct the DNS entries, ensuring clients can connect to the cluster using the FQDN.

Reference:

Dell PowerScale Networking Guide DNS Configuration and Best Practices Dell PowerScale OneFS Administration Guide Managing Network and DNS Settings Troubleshooting Connectivity Issues Dell Knowledge Base Article

Reveal Solution Next Question

QUESTION: 10

An engineer runs ini_reformat_node command.
What are they attempting to do?

Reformat the mirrored FEC data.
Reformat a node quickly to repurpose a node.
Reformat the mirrored journals.
Reformat a node to securely erase all data.

Answer(s): D

Explanation:

The isi_reformat_node command is a utility used on Dell PowerScale (Isilon) clusters to reformat a node and securely erase all data on it. This command initializes the node's storage media, effectively wiping all user data, metadata, and system configurations from the node's drives.
Purpose of isi_reformat_node:
Secure Data Erasure: It ensures that all data is securely erased, which is essential when decommissioning a node or repurposing it for a different use. Node Recovery or Repurposing: It prepares the node for re-integration into the cluster or for use in a different cluster by resetting it to a factory-like state.
Usage Scenarios:
Decommissioning a Node: When permanently removing a node from a cluster and ensuring no residual data remains.
Repurposing Hardware: When reassigning the node to a different cluster or role and needing to eliminate all previous configurations and data.
Recovering from Corruption: In cases where the node's data is irreparably corrupted, reformatting allows for a clean start.
Key Points:
Data Loss Warning: Running isi_reformat_node will result in complete data loss on that node. It's crucial to ensure that the data is backed up or that the node's data is no longer needed. Cluster Impact: Before reformatting, the node should be appropriately prepared, and the cluster should be informed to avoid any data protection issues. Secure Erasure Standards: The command follows secure erasure standards to prevent data recovery through forensic methods.

Reference:

Dell PowerScale OneFS CLI Administration Guide Details on using isi_reformat_node and its implications.
Dell PowerScale OneFS Administration Guide Procedures for safely removing and reformatting nodes.
Dell Knowledge Base Article Best practices for decommissioning and reformatting nodes in a PowerScale cluster.

Reveal Solution Next Question

QUESTION: 11

An existing PowerScale cluster consists of four A300 and three F600 nodes.
What is the minimum number of nodes an engineer can add to expand both node pools?

txA300 2xF600
2xA300 2xF600
3xF600 4xA300
2xA300 1x F600

Answer(s): D

Explanation:

In a Dell PowerScale cluster that consists of four A300 nodes and three F600 nodes, expanding both node pools requires adding nodes to each pool. The minimum number of nodes an engineer can add to expand both node pools is determined by the following factors:

Minimum Node Addition:
PowerScale clusters allow the addition of nodes one at a time to existing node pools. However, to maintain balanced performance and capacity, it's recommended to add nodes in pairs or according to specific guidelines for each node type.
Node Pool Requirements:
A300 Nodes (Capacity Tier):
Designed for high-capacity storage needs.
Adding at least two A300 nodes helps maintain even data distribution and protection levels.
F600 Nodes (Performance Tier):
Designed for high-performance all-flash storage requirements. Adding at least one F600 node can expand the performance tier, but adding two would be optimal for balance.
Minimum Nodes to Expand Both Pools:
Option D suggests adding 2xA300 and 1xF600, totaling three nodes. This is the minimum number among the options provided that allows expansion of both node pools.
Why Option D is Correct:
Meets Minimum Addition Recommendations:
Adding 2xA300 nodes enhances capacity while maintaining data protection schemes like FEC (Forward Error Correction).
Adding 1xF600 node increases performance capacity with minimal investment.
Ensures Data Protection and Performance:
Adequate node addition helps in maintaining the cluster's data protection policies and performance characteristics.

Reference:

Dell PowerScale OneFS Administration Guide Guidelines on adding nodes to existing clusters. Dell PowerScale Best Practices Recommendations for node additions and cluster expansions. Dell PowerScale Technical Specifications Details on node types and their roles within a cluster.

Reveal Solution Next Question

QUESTION: 12

What type of upgrade on a Dell PowerScale cluster requires the least amount of time?

Simultaneous
Parallel
Rolling
Automatic

Answer(s): A

Explanation:

A simultaneous upgrade on a Dell PowerScale cluster involves upgrading all nodes at the same time. This method requires the least amount of time compared to other upgrade types because it minimizes the total duration by handling the upgrade process concurrently across the entire cluster.
Types of Upgrades:
Simultaneous Upgrade:
Definition: All nodes are upgraded at the same time.
Advantages:
Fastest upgrade method.

Reduces total upgrade time significantly.
Disadvantages:
Requires cluster downtime; not suitable for environments that need continuous availability.
Rolling Upgrade:
Definition: Nodes are upgraded one at a time or in small groups.
Advantages:
No cluster downtime; services remain available.
Disadvantages:
Takes longer to complete as each node is upgraded sequentially.
Parallel Upgrade:
Definition: Nodes are upgraded in parallel batches.
Advantages:
Balances upgrade speed and availability.
Disadvantages:
May still require some service interruption.
Automatic Upgrade:
Definition: The upgrade process is automated but follows the rolling or parallel methodology.
Advantages:
Reduces manual intervention.
Disadvantages:
Upgrade time depends on the underlying method used (rolling or parallel).
Why Simultaneous Upgrade Requires the Least Amount of Time:
Concurrent Processing: Upgrading all nodes at once leverages parallelism, drastically reducing the total time needed.
No Sequential Steps: Eliminates the wait time associated with upgrading nodes one after another. Use Case Considerations: Suitable for non-production clusters or environments where downtime is acceptable.
Important Considerations:
Cluster Downtime: Simultaneous upgrades will render the cluster unavailable during the process. Risk Management: Any issues during the upgrade can affect the entire cluster; thorough planning and backups are essential.

Reference:

Dell PowerScale OneFS Upgrade Planning and Process Guide Details on upgrade methods and best practices.
Dell PowerScale Administration Guide Instructions and considerations for performing cluster upgrades.
Best Practices for OneFS Upgrades Recommendations for selecting the appropriate upgrade method based on environment needs.

Reveal Solution Next Question

Free D-PSC-MN-01 Exam Braindumps (page: 3)

QUESTION: 9

Explanation:

Reference:

QUESTION: 10

Explanation:

Reference:

QUESTION: 11

Explanation:

Reference:

QUESTION: 12

Explanation:

Reference: