Free D-PST-MN-A-24 Exam Braindumps (page: 6)

Page 6 of 17

A Storage Administrator notices two fans in a Dell EMC PowerStore are faulted.
What describes the system behavior in this circumstance?

  1. An increased fan speed signal is sent to the surviving fans and the system continues normal operations
  2. Upon the second fan fault, all host I/O is terminated immediately and the PowerStore goes through the halt and vault process and shuts down
  3. A five-minute timer starts upon the second fan fault and the system shuts down automatically after the timer expires
  4. CPU clock speed is reduced by 50% to lower internal temperatures and the system continues normal operations

Answer(s): A

Explanation:

When two fans in a Dell EMC PowerStore system are faulted, the system's behavior is to send an increased fan speed signal to the surviving fans to compensate for the loss and continue normal operations. This is a part of the system's design to ensure redundancy and maintain cooling within operational parameters even when one or more fans are not functioning. The system monitors the health of all fans continuously. If a fan fault is detected, the system will:
Generate an alert to notify the administrator of the fault.

Increase the speed of the remaining fans to prevent overheating. Continue to operate normally unless the temperature exceeds safe operating limits. The administrator should then take the following steps:
Acknowledge the alert in the PowerStore Manager.
Plan for the replacement of the faulted fans as soon as possible to restore full redundancy. Follow the replacement procedures as outlined in the Dell PowerStore Installation and Service Guide.
It is important to address fan faults promptly to ensure the long-term health and performance of the PowerStore system. The increased fan speed is a temporary measure to maintain operations until the faulted fans can be replaced.



While on-site installing a Dell EMC PowerStore system, the node A and B embedded module fault LEDs are alternating blue and amber (blue for 3 seconds).
What does this indicate?

  1. Nodes are in service mode
  2. Nodes are in degraded mode
  3. The system is not initialized
  4. The system is booting

Answer(s): C

Explanation:

When the node A and B embedded module fault LEDs on a Dell EMC PowerStore system are alternating between blue and amber, with the blue LED illuminated for 3 seconds, it indicates that the system is not initialized. This LED behavior is part of the system's design to communicate its current state to the user or technician on-site.
The initialization process is a critical step during the installation of a PowerStore system. It involves setting up the system's configuration, including network settings, storage pools, and other essential parameters. Until this process is completed, the system cannot perform storage operations or host any virtual machines.
To resolve this and initialize the system, the following steps should be taken:
Connect to the system through the PowerStore Manager using a supported web browser. Complete the Initial Configuration Wizard (ICW), which guides you through the necessary steps to initialize the system.
Once the ICW is completed, the system will finalize its configuration and the LEDs should reflect a normal operational state.
For more detailed guidance on the initialization process and understanding the LED indicators, refer to the Dell PowerStore Installation and Service Guide. This document provides comprehensive instructions on installing and configuring the PowerStore system, ensuring it is ready for use.





Refer to the exhibit.

Which column indicates the primary appliance?

  1. Service Tag
  2. Mode
  3. Model
  4. IP Address

Answer(s): B

Explanation:

In the Dell EMC PowerStore system, the primary appliance is typically indicated by the `Mode' column within the system's user interface. The `Mode' column shows the operational mode of the appliance, which can include states such as `Primary', `Secondary', or `Standby'. The primary appliance is the one that is actively servicing workloads and managing operations within the PowerStore cluster.
The `Service Tag' column represents the unique identifier for each physical appliance, the `Model' column indicates the specific model of the appliance, and the `IP Address' column shows the network address assigned to the appliance.
While these columns provide important information, they do not indicate the role of the appliance within the cluster. For more detailed information on identifying the primary appliance and understanding the role of each appliance in a PowerStore cluster, users can refer to the Dell PowerStore Clustering and High Availability documentation. This documentation provides insights into the clustering architecture of PowerStore and how the primary appliance is determined during the initial configuration process.



What describes Dell EMC PowerStore heat dissipation?

  1. Lower model numbered systems have lower heat dissipation specifications than higher model numbered systems
  2. X systems have higher heat dissipation specifics than T systems
  3. Higher model numbered systems have lower heat dissipation specifications than lower model numbered systems
  4. T systems have higher heat dissipation specifics than X systems

Answer(s): A

Explanation:

Heat dissipation in Dell EMC PowerStore systems is typically related to the power and cooling requirements of the system, which are influenced by the system's configuration and components. Generally, lower model numbered systems, which have less processing power and storage capacity, will have lower heat dissipation specifications compared to higher model numbered systems that are more powerful and have greater storage capacity.
The heat dissipation specification is an important factor in data center planning as it affects the environmental control requirements such as cooling and airflow.
When planning for the installation of PowerStore systems, it is crucial to consider the heat output of the systems to ensure that the data center environment can maintain the optimal temperature for reliable operation. For detailed specifications on heat dissipation for specific PowerStore models, one should refer to the official Dell EMC PowerStore Spec Sheets, which provide comprehensive information on the electrical and thermal characteristics of each model. These documents are essential for understanding the power consumption and cooling requirements of PowerStore systems. Following the guidelines provided in these documents helps ensure that the systems are deployed in an environment that can support their thermal management needs.



Page 6 of 17



Post your Comments and Discuss Dell D-PST-MN-A-24 exam with other Community members:

Tommy commented on October 22, 2024
Passed the exam today with this dump. Very happy. Now Go Trump Go. Make this country great again.
UNITED STATES
upvote

Tubby commented on October 22, 2024
Asked by my employee to pass this exam. So I bought the full version of this exam dump to quickly prepare and pass the exam. I did not want to waste my out of office time to prepare for this.
UNITED STATES
upvote

SSSR commented on October 22, 2024
Great stuff and nicely formatted content. PDF is version is what I highly recommend as it has double the amount of questions.
UNITED KINGDOM
upvote

Nayaran commented on October 21, 2024
First and for most... this exam is extremely hard. Second this exam dump contains majority of the questions. I passed the certification exam.
UNITED STATES
upvote

Marc commented on October 21, 2024
hello would need help
UNITED STATES
upvote

Honest Consumer commented on October 21, 2024
Not a bad question bank. Very close to real exam topics and questions.
UNITED STATES
upvote

Shawna commented on October 21, 2024
I found this document a big help towards my preparation. Well worth the money.
UNITED STATES
upvote

Asma commented on October 21, 2024
Good questions
FRANCE
upvote

Jen commented on October 21, 2024
Do not overthink this guys. Just use these questions and you are good to pass.
EUROPEAN UNION
upvote

siva commented on October 21, 2024
it's goooood
INDIA
upvote

Lee commented on October 21, 2024
Finally a exam dump I can rely on. I went for the full PDF version and it turned out to be as advertised. I just passed first exam last Friday. Preping for the second one. Hopefully I can write and pass this one too because these exams are very difficult.
Hong Kong
upvote

Subash commented on October 21, 2024
I am planning to take this exam. Are these 257 questions enough to clear it? Also, does each section have a passing percentage, or is it based on the overall ?
INDIA
upvote

amrith commented on October 20, 2024
more questions on databricks as well please
Anonymous
upvote

jeff commented on October 20, 2024
This took the pressure out of preparation as I read everywhere that this exam is really hard. Wonderful resource.
UNITED STATES
upvote

CoolMo commented on October 20, 2024
A friend gave me the address to this site he said he passed his Azure exam using their exam dumps. I hope it can help me with my exam as well.
EUROPEAN UNION
upvote

Tyler commented on October 20, 2024
This is BIG help. I don't want to discount the fact that these questions are very similar to those in real exam. Way to go guys.
Canada
upvote

amrith commented on October 20, 2024
Documentation
Anonymous
upvote

Raj commented on October 20, 2024
Great article! I especially appreciated the way you broke down the questions
UNITED STATES
upvote

Jim commented on October 20, 2024
Some of the questions are tought. Need to practice more..
UNITED STATES
upvote

Jim commented on October 20, 2024
Good site for Salesforce certification
UNITED STATES
upvote

Tom commented on October 20, 2024
This is a very good resource
UNITED STATES
upvote

Marcellus Werifah commented on October 20, 2024
Verified answers
UNITED STATES
upvote

samir commented on October 20, 2024
good practice
AUSTRIA
upvote

Patric commented on October 20, 2024
The main thing about this exam dump is that the PDF is not free. And that is what I needed. So I had to pay for that but they offer 50% discount if you buy 2 or more exams.
Spain
upvote

Nathan commented on October 20, 2024
Using dumps are my last resort. And that is what I ended up using with this exam to pass. The exam is extremely difficult.
France
upvote

Marcellus Werifah commented on October 20, 2024
Who decides what is the correct in case of conflicts
UNITED STATES
upvote

Marcellus Werifah commented on October 20, 2024
Novice. Would need detailed explanation of any questions
UNITED STATES
upvote

Maya commented on October 20, 2024
It would be great if all answers are supported by reference link.
UNITED KINGDOM
upvote

Maya commented on October 20, 2024
good material
UNITED KINGDOM
upvote

Jay commented on October 20, 2024
Interesting selection of questions
GREECE
upvote

Vinod Kumar Ramaswamy commented on October 20, 2024
ITS VERY USEFUL
UNITED KINGDOM
upvote

Srikanth commented on October 20, 2024
Useful to prepare for the exam
Anonymous
upvote

Alex commented on October 20, 2024
This exam is super duper hard. So prepare for it guys. I only passed it because of these questions. God bless the owner of this site.
UNITED STATES
upvote

Petrious commented on October 20, 2024
The site provides good content and very reliable support team. Very quick to reply to questions.
GERMANY
upvote