GRE GRE Section 1: Verbal Exam Prep
Section One : Verbal (Page 28 )

• Smartphones and tablets
• Laptops and workstations
• Other mobile or endpoint computing devices

• 24 cores: Available in the Business Critical provisioned-compute configurations.
• Approximately 124 GB memory: Matches the memory capacity of the relevant Business Critical hardware configuration.
• More than 50,000 IOPS: Business Critical uses local SSD storage and provides the high I/O performance required here.
• 500 GB storage: Well within the tier’s supported capacity.

• Premium: The DTU-based Premium tier does not provide the required combination of compute, memory, and I/O characteristics.
• Hyperscale: Hyperscale is primarily intended for very large databases and independent storage scaling. It is not the best match for these specific high-memory and high-IOPS requirements.

• One physical NIC is active and carries traffic.
• Another NIC remains on standby.
• If the active uplink fails, traffic switches to the backup uplink.
• This provides redundancy without requiring special switch-side link aggregation configuration.

• Balance-SLB: Distributes traffic based on source load balancing; not the default.
• Balance-TCP: Uses dynamic TCP traffic balancing and generally requires appropriate network-switch configuration.
• No Uplink Bond: Incorrect because vs0 is normally configured with redundant uplinks.

• Menerjemahkan soal ke bahasa Indonesia.
• Menyebutkan jawaban yang benar.
• Menjelaskan alasan jawaban tersebut.
• Memberi tahu jika kunci jawaban yang tersedia tampaknya keliru.
• Menjelaskan istilah teknis penting dalam soal.

• Accept: Acknowledge the risk and take no additional action.
• Transfer: Shift the risk or its financial impact to another party, such as through insurance or outsourcing.
• Mitigate: Reduce the likelihood or impact of the risk, such as by implementing security controls.
• Avoid: Eliminate the activity or exposure that creates the risk.

• Instant messaging/chat: Can be abused to send malicious links or attachments, but is not the answer most directly associated with high-risk file sharing.
• E-mail: A common malware delivery method, but the question emphasizes an application type known for direct file exchange.
• End-to-end applications: This describes communication protection or architecture, not a specific malware distribution risk.

• LastName: Required.
• FirstName: Optional.
• AccountId: Optional; a Contact may be associated with an Account later or remain private, depending on organization settings.
• Name: A compound display field made from first and last name; it isn’t entered as a separate field.

• The listener uses a virtual IP address shared by the availability-group replicas.
• Floating IP, also called Direct Server Return (DSR), allows the SQL Server nodes to respond using the listener’s IP address rather than their individual VM IP addresses.
• This is required for the availability-group listener to function correctly with an Azure internal load balancer.

• What information each stakeholder needs
• When and how often it should be communicated
• Which format or channel should be used
• Who is responsible for communicating it

• A: The team should not decide stakeholder communications without first checking the established plan and CEO’s needs.
• B: An executive summary may be appropriate, but choosing a solution before reviewing the plan is premature.
• D: The stakeholder engagement plan addresses how to engage stakeholders, but this is primarily a communication planning issue.

• Required response and resolution times
• Availability or uptime targets
• Performance standards
• Support obligations
• Remedies or penalties for failing to meet the terms

• SOW (Statement of Work): Defines the project’s scope, tasks, deliverables, and schedule.
• MOA (Memorandum of Agreement): Describes agreed responsibilities between parties, often for a specific activity.
• MOU (Memorandum of Understanding): Records a mutual understanding or intention, usually less formal than a contract.

• Additional running costs: $800
• Less depreciation: $300

• The $100 reduction in fixed production overhead absorbed is only an accounting reallocation. It does not represent an actual saving in total fixed overhead.

• Asynchronous inference is designed for applications that submit individual inference requests, place them in a queue, and retrieve results later. It is useful when requests may take a long time or when traffic is intermittent.
• Batch transform is designed specifically to run inference over an entire large dataset stored in Amazon S3 and produce an output dataset.

• Large dataset/offline processing ? Batch transform
• Large or slow individual requests processed later ? Asynchronous inference

• SQL injection: Manipulates database queries through application input.
• XML external entities (XXE): Abuses XML parsers to access files, internal systems, or other resources.
• Cross-Site Request Forgery (CSRF): Tricks an already authenticated user’s browser into sending an unwanted request. It generally does not steal session cookies.

• Third-party attestation: Provides independent validation, but is typically periodic and performed by an external party.
• Penetration testing: Simulates attacks to identify exploitable vulnerabilities; it does not primarily track compliance.
• Vulnerability scans: Identify technical weaknesses, but do not provide a detailed review of procedures or compliance activities.

• Business
• People
• Governance
• Platform
• Security
• Operations

• Sustainability
• Performance efficiency
• Reliability

• The message came from the claimed sender (authentication)
• The message was not altered in transit (integrity)
• The sender cannot easily deny having signed and sent it (non-repudiation)

• Compliance standards: May be a reason in some organizations, but it is not the primary security benefit.
• Increase delivery rates: Digital signatures do not generally improve email delivery.
• Block phishing attacks: Signatures can help recipients verify legitimate messages, but they do not block phishing by themselves.

1. Append Table1 and Table2 as a new query

1. Select the product column in the appended query.

1. Choose Remove Rows > Remove Duplicates

• Streams — track change data for tables or views.
• External tables — reference data stored in an external cloud storage location.

• Role — account-level security object.
• Warehouse — account-level compute resource.
• User — account-level security object.
• Share — account-level object used to share data.

• AWS ke official CLF-C02 Exam Guide aur exam overview padhein.
• Main questions ke answers aur concepts Hinglish mein explain kar sakta hoon.
• Important topics: Cloud concepts, security and compliance, AWS services, billing/pricing, support plans.
• Is page ke Q1–Q5 mein se kisi question ka number bhejkar explanation le sakte hain.

• STP elects the switch with the lowest Bridge ID as the root bridge.
• The Bridge ID consists mainly of bridge priority + MAC address.
• If multiple switches have the same priority, the switch with the lower MAC address is preferred.
• STP bridge priority values are configured in increments of 4096, such as 0, 4096, 8192, and so on. 32768 is the standard default value.

• Which batches and markets are affected
• Whether the deficiency affects product quality, efficacy, or patient safety
• Whether the issue is an ongoing manufacturing problem
• Whether immediate containment or distribution suspension is needed

• A — Withdraw the product: may be necessary, but is premature before assessing the risk.
• B — “Dear Dr.” letter: may be appropriate later, depending on the risk.
• C — Notify global authorities: may become mandatory, but the scope and urgency depend on the assessment.

• To identify the number of errors: select Column quality. It shows the percentage and count of Valid, Error, and Empty values for each column.
• To resolve errors: use the appropriate error transformation:

• Tracking who accessed or changed customer information
• Detecting unauthorized activity
• Supporting accountability and investigations
• Providing evidence for compliance and incident response

• Single sign-on not enabled: SSO improves convenience and centralized authentication, but it is not essential for access control.
• Complex passwords not required: This weakens authentication, but other controls may reduce the risk.
• Security baseline not consistently applied: A concern, but it is less specific and less immediately damaging than having no activity records at all.

• Type 1 hypervisor: Runs directly on the physical hardware (“bare metal”).
• Type 2 hypervisor: Runs inside the host OS as an application.

• Bare-metal installation: Type 1
• Local management only: Not a defining characteristic
• Specific hardware requirements: Not the key distinction

• A. Continue using the current system: It will eventually fail and offers no recovery strategy.
• B. Virtualize the entire system: Correct. A VM can preserve the old OS, application, settings, and dependencies while running on newer physical hardware.
• C. Containerize the application: Containers generally share the host OS kernel and are not suitable for preserving an entire incompatible legacy OS.
• D. Clone the disks to USB: A disk clone may provide backup or temporary recovery, but it does not solve hardware compatibility or provide a reliable long-term platform.

• MFA adds an additional authentication factor, such as a phone notification or verification code.
• It helps prevent unauthorized sign-ins, even if a password is compromised.
• It does not encrypt, store, or protect credentials used by deployment processes.

Why this is correct

• Each user authenticates with their own Google account.
• Google manages the user’s SSH key association.
• IAM controls who can access instances.
• Access can be audited by user identity, so security can determine who accessed a VM.
• Granting the role to a Google group avoids managing permissions individually.

Why the others don’t apply

• A: A shared private key is difficult to distribute securely and cannot reliably identify which employee used it.
• B: Manually collecting and deploying keys on every instance is operationally inefficient and complicates auditing.
• D: A project-wide shared key has the same identity and key-management problems as option A. It also does not provide per-user accountability.

1. Search & Intelligence in the Microsoft 365 admin center — No

1. Audit in the Microsoft Defender portal — Yes

1. Audit in the Microsoft Purview portal — Yes

• CBWFQ (Class-Based Weighted Fair Queuing): Creates traffic classes and assigns each class a guaranteed bandwidth or queueing treatment.
• PQ (Priority Queuing): Uses multiple queues with strict priority. Higher-priority queues are serviced before lower-priority queues, making it useful for delay-sensitive traffic—but it can starve lower-priority traffic.

• FRTS: Traffic shaping for Frame Relay; it controls the transmission rate rather than selecting packets during congestion.
• CAR: Polices traffic by rate, typically dropping or remarking packets that exceed a limit.
• PBR: Policy-Based Routing; it selects forwarding paths and is not a QoS queueing mechanism.

• Product recall: Premature before confirming a violation or assessing risk.
• Notify the regulatory authority: May be required later, especially if the discrepancy affects safety or compliance, but first investigate and verify the facts.
• Inform production: Not the initial regulatory assessment step; production may become involved if a packaging or manufacturing error is identified.

• Deterrent control: The signs warn people they may be filmed. This can discourage unauthorized activity because individuals know surveillance is present.
• Detective control: CCTV monitors and records activity, helping identify or investigate incidents after—or while—they occur.

• Preventive: Stops an incident from occurring; CCTV generally does not physically prevent access.
• Corrective: Restores systems after an incident.
• Directive: Tells people what they must do, such as a security policy.
• Compensating: An alternative control used when the preferred control cannot be implemented.

• The backup file is complete and uncorrupted.
• The required data can actually be recovered.
• The recovery process and documentation work as expected.
• Recovery objectives, such as acceptable downtime, can be met.

• Backup logs may show that a job completed, but not that the backup is usable.
• File size does not prove the contents are valid.
• Email notifications may confirm process completion, not recoverability.
• Appointing a DBA does not itself validate backups.

• Warehouse size: Larger warehouses use more credits per unit of time than smaller ones.
• Number of clusters: A multi-cluster warehouse can run multiple clusters, and each active cluster consumes credits. Therefore, increasing the maximum or active cluster count can increase consumption.

• Number of users: More users may cause more workload, but users themselves do not consume credits.
• Amount of data processed: Snowflake warehouses are not charged directly by the amount of data scanned. However, processing more data may cause the warehouse to run longer, indirectly increasing credits.

• Delete the City column
• Remove duplicates from the Country column

1. ???? City ??? ????? ?? ???? ?????? ???? ?????.
2. ???? ???? Country ?????? Remove duplicates ?????? ??? ?? ???? ??? ?????.

• IaaS: You deploy and manage virtual machines, including the operating system and installed software. Azure manages the physical datacenter, hosts, and networking infrastructure.
• PaaS: Azure manages the infrastructure and operating system, while you deploy and manage your application code. Examples include Azure App Service and Azure Functions.

1. Yes — One account can manage multiple subscriptions

1. No — You cannot merge two subscriptions into one

1. Yes — A resource belongs to only one subscription

1. Initiate — establish the project, scope, team, and governance.
2. Plan — develop the detailed plan, schedule, resources, and implementation approach.
3. Execute — configure, integrate, migrate, test, and prepare the solution.
4. Deploy — move the solution into production and support go-live.
5. Close — complete handover, confirm outcomes, and formally close the project.

• B: Prompt caching reduces cost and latency for repeated content, but cached content still occupies the context window. It does not solve context accumulation.
• C: Switching to a smaller model changes model capacity but does not address the growing context or remove irrelevant data.
• D: Keeping everything indefinitely increases token usage, risks context-window limits, and can distract the model with outdated information.

• Create a CodeCommit repository in the secondary Region.
• Use CodeBuild to run a Git mirror operation from the primary repository to the secondary repository.
• Use EventBridge to detect relevant repository events, such as a pull request being merged.
• Invoke a Lambda function, which starts the CodeBuild project.

• B: Amazon S3 is object storage, not a Git repository that developers can use as a CodeCommit remote.
• C: CodeArtifact is intended for packages and artifacts, not source-code repository mirroring.
• D: An AWS Cloud9 environment is not an appropriate automated replication mechanism and would require manual or persistent infrastructure management.

• Allow the team to identify the causes of delays.
• Encourage improvements to processes, tools, and collaboration.
• Help remove impediments without dictating solutions.
• Protect quality and maintain a sustainable pace.

• A: An impediment log may help track issues, but merely recording them does not resolve the root causes.
• B: Directing teams toward solutions conflicts with the agile principle of a self-managing team.
• C: Adding impediments to the product backlog may delay their resolution and incorrectly treats them as product features.

• JDBC
• SnowSQL
• Snowflake Web Interface (UI)
• ODBC
• Python connector

• Operating profit is affected because transfer price determines internal sales revenue.
• Return on investment (ROI) is affected because ROI depends partly on operating profit.
• Sales revenue is affected because the division records revenue from transferring its output.
• Cost of components purchased is not affected by the transfer price. These are input costs paid to external suppliers and are based on the supplier’s price.

• The users currently have Office 365 Enterprise E3 licenses assigned directly.
• Assigning Microsoft 365 Enterprise E5 through a group does not automatically remove their directly assigned E3 licenses.
• From the Licenses blade, you can select the E3 product and remove it from all assigned users in one operation. This requires less effort than editing 2,500 users individually.

• Identity Governance manages access reviews, entitlement management, and related governance—not bulk license removal.
• Set-AzureAdUser does not remove product licenses.
• Set-WindowsProductKey applies Windows product keys and is unrelated to Microsoft 365 licensing.

• contoso.onmicrosoft.com
• contoso1.onmicrosoft.com

• onmicrosoft.com domains: Maximum of five per tenant.
• Custom domains: Domains that your organization owns and verifies in Microsoft 365.

• Floating IP must be enabled on the load-balancing rule.
• Session persistence should normally remain None.
• The health probe determines which replica should receive traffic.
• Client-IP persistence is unnecessary and can cause connections from the same client to remain associated with a backend replica longer than intended.

• Q9 — Client IP session persistence: No
• Q10 — Floating IP: Yes

1. Install a Cassandra-compatible ODBC driver.
2. Configure a data source name (DSN), if required.
3. In Power BI Desktop, select Get Data > ODBC.
4. Choose the configured DSN and connect.

• Microsoft SQL Server database: Connects to SQL Server, not Cassandra.
• OLE DB: Requires a compatible OLE DB provider; this is not the standard choice for Cassandra in Power BI.
• OData: Requires Cassandra data to be exposed through an OData service, which is not the normal direct connection method.

• Honeypots are deliberately vulnerable or attractive systems designed to lure attackers. Legitimate users should not normally access them, so activity there can indicate a successful intrusion or lateral movement.

• A DNS sinkhole redirects requests for known malicious domains to a controlled internal system instead of the real destination. Security teams can monitor those requests and identify compromised devices attempting to contact command-and-control infrastructure.

• Tokenization: Replaces sensitive data with non-sensitive tokens; it is a protection method, not an attacker-detection method.
• CI/CD: Automates software development and deployment processes.
• Threat modeling: Identifies potential threats during design and planning.
• Data obfuscation: Makes information harder to understand, but does not directly detect infiltrators.

• Accept: Acknowledge the risk without taking additional action.
• Transfer: Shift the risk’s impact to another party, such as through insurance or outsourcing.
• Mitigate: Reduce the likelihood or impact, such as by implementing controls.
• Avoid: Eliminate the activity or situation that creates the risk.

• Preparing and managing datasets
• Building and training machine-learning models
• Testing and evaluating models
• Deploying models as endpoints for predictions

• The Speech resource subscription key
• The Azure region
• Optional endpoint and speech settings

python 
speech_config = speechsdk.SpeechConfig( 
    subscription=key, 
    region=region 
)

• SpeechSynthesizer converts text to speech.
• It uses a SpeechConfig, but it does not configure the service connection itself.

• AudioConfig: Defines audio input or output sources.
• AudioOutputConfig: Defines where synthesized audio should be sent.
• SpeechConfig: Configures the Azure Speech service connection.