HashiCorp Terraform Associate 004 Exam Prep
Terraform Associate 004 (Page 8 )

• Azure creates a corresponding service principal in Microsoft Entra ID.
• The identity’s lifecycle is tied to the Azure resource.
• If the resource is deleted, Azure automatically deletes the identity.
• Only the associated resource can use that identity to request tokens.
• You can grant the identity permissions to access services such as Key Vault or Storage without storing credentials in code.

• Conserve public IPv4 addresses: IPv4 addresses are limited, so many internal devices share a smaller number of public addresses through NAT.
• Reduce direct exposure: Private addresses are not directly routable from the public Internet, which helps reduce unsolicited access to internal devices.

• Strongest encryption algorithms: Choose the strongest available encryption and integrity options, typically AES with the largest key size and a secure integrity algorithm.
• Encrypt all traffic: Select tunnel mode rather than transport mode. Tunnel mode encrypts the entire original IP packet, which is appropriate for a site-to-site VPN between branch networks.
• Secret-password authentication: Configure a pre-shared key (PSK) on both VPN concentrators. The key must match at both ends.

1. Remote access to a Windows PC
2. Full chat and optional game-console functions

• Windows Remote Desktop (RDP) uses TCP 3389. The router needs a port-forwarding rule that sends incoming traffic on that port to the Windows PC’s internal IP address.
• The game console should connect through the wireless AP. Using WPA2-PSK provides the required wireless security while allowing normal online, chat, and optional services.
• The firewall should separate the internal network from the screened subnet. Its screened-subnet-side address is shown as 10.100.0.1.
• Devices must be placed in the correct network locations: the PC behind the router, the console on the wireless AP, and the firewall between the appropriate network segments.

• Port 515: LPD/LPR line-printer service
• Port 631: IPP — Internet Printing Protocol
• Port 9100: JetDirect/RAW printing, commonly used by network printers

• Linux machine: Linux could run these services, but the three printer-specific ports strongly indicate a printer.
• Router: Routers may use Telnet and HTTP, but normally would not expose ports 515, 631, and 9100 together.
• Windows machine: Windows can share printers, but this particular service combination is more characteristic of a network printer’s embedded operating system.

1. Define Power Platform DLP policies

1. Add custom prompt modifications

1. Conduct adversarial testing

• Prevent connections to malware command-and-control servers
• Identify infected systems making those DNS requests
• Collect information for incident response

• A: Attackers do not normally use sinkholes to map a company’s domain structure.
• B: Redirecting employees from legitimate sites to attacker-owned sites describes malicious DNS manipulation, not a defensive sinkhole.
• D: Attracting attackers away from real resources is more closely associated with a honeypot or deception system.

• 16 VMs: one failure loses 25 GB and 10 cores—only 6.25% of memory.
• 8 VMs: one failure loses 12.5% of memory.
• 4 VMs: one failure loses 25%.
• 1 VM: one failure loses the entire application environment.

• Import — Loads data into Power BI. It requires a refresh, so it may not reflect changes within two minutes unless refresh is configured appropriately.
• Live connection — Connects to an existing Power BI semantic model or Analysis Services model; it is not the normal choice for connecting directly to an Azure SQL database.

• Tactics: The attacker’s overall goal, such as gaining persistence or exfiltrating data
• Techniques: The methods used to achieve that goal
• Procedures: The specific implementation or sequence of actions

• IP addresses and hash values: Useful indicators, but they can change quickly.
• Indicators of compromise: TTPs may help identify IOCs, but their main value is describing behavior.
• Tools: Attackers can replace tools or use legitimate administrative utilities.

• Accept: Acknowledge the risk and choose not to take additional action.
• Transfer: Shift the risk or its financial impact to another party, such as through insurance or outsourcing.
• Mitigate: Reduce the likelihood or impact of the risk, such as by implementing security controls.
• Avoid: Eliminate the activity or condition that creates the risk.

• Basic: Self-help only; no technical support or design assessment.
• Developer/Standard: Technical support, but generally not the full proactive architecture guidance required here.
• Professional Direct: Includes proactive guidance and architecture recommendations.
• Premier: Also supports this, but is not the minimum-cost option.

• Whether a user has a console password
• Password age and last password change
• Whether MFA is enabled
• Access key status
• Access key creation date and last-use information
• Access key age, which helps audit rotation

• IAM Access Analyzer identifies unintended access to resources; it does not report credential age or rotation.
• AWS Artifact provides AWS compliance documents and agreements, not details about your IAM users.
• AWS Audit Manager helps collect evidence for audits, but it is not the direct tool for viewing IAM credential rotation details.

• Which Security policy matches
• Which NAT rule/translation is selected
• Which PBF rule applies
• Which route is used

text 
test security-policy-match ... 
test nat-policy-match ... 
test pbf-policy-match ... 
test routing fib-lookup ...

• tag=Priv searches the tag field for values beginning with Priv. The wildcard can match the remaining characters, so it matches Privileged.
• tag=Priv would search for the exact tag Priv, not Privileged.
• tag=priv* uses lowercase priv; tag matching is treated as case-sensitive here, so it may not match the tag Privileged.
• tag=privileged uses the wrong capitalization for the exact tag.

• Digitally signing the software: Verifies authenticity and integrity. It does not hide how the software works.
• Limiting third-party libraries: May reduce dependencies and attack surface, but does not directly prevent reverse engineering.
• Using compile flags: Some compiler options can remove debugging information or optimize code, which may provide limited protection, but this is not the primary technique identified for preventing reverse engineering.

• ARP poisoning: Redirects or intercepts local network traffic; it would more likely affect communication paths or cause man-in-the-middle behavior.
• Jamming: Interferes with wireless signals. The scenario does not indicate a wireless outage.
• Kerberoasting: Attempts to obtain service-account password hashes from Kerberos; it is a credential attack, not typically a direct service outage.

1. Get Data ? Folder in Power BI Desktop.
2. In Power Query Editor, expand the Attributes column to expose metadata such as hidden status and other file attributes.
3. Remove the Content column (and any other data columns you do not need).

• Name
• Extension
• Date accessed
• Date modified
• Folder Path
• Attributes
• Content

• SageMaker endpoint: Not required because the model is being used through Amazon Bedrock.
• SageMaker Model Registry: Used for managing SageMaker models, not for making a Bedrock custom model available.
• Grant access in Amazon Bedrock: IAM permissions may still be needed, but granting access alone does not provide the required inference capacity.

• Basic: No technical or architectural guidance.
• Standard: Technical support, but not the required design-assessment service.
• Professional Direct: Provides advisory and architecture guidance.
• Premier: Provides it too, but is unnecessarily expensive for this requirement.

• Replace the keyboard: More expensive and unnecessary before simpler causes are ruled out.
• Replace the key switch: Laptop keyboards generally aren’t designed for individual switch replacement.
• Replace the circuit board: Excessive for a single nonworking key and not a cost-effective first step.

• Hardware and infrastructure
• System software
• Networks and communications
• Technology platforms and services

• Business Architecture: Defines business strategy, organization, functions, and processes.
• Data Architecture: Defines the structure and management of enterprise data.
• Application Architecture: Describes application systems and how they interact to support business and data processing.

• R-squared: Typically used for regression, not classification.
• RMSE: Measures prediction error for continuous numerical values, so it is not the best fit here.
• Learning rate: A training hyperparameter that controls how quickly the model updates its weights; it is not an evaluation metric.

• Leadership and stakeholder commitment
• Business capability and skills
• Organizational culture
• Availability of resources
• Ability to manage and sustain change
• Impact of the proposed transformation

• How ready the organization is
• Which areas require urgent attention
• How difficult each issue may be to resolve
• Risks that could affect implementation

• A: Places the assessment in Phase B and refers vaguely to creating views; this is not the prescribed technique.
• B: An Implementation Factor Assessment and Deduction Matrix is not the primary TOGAF technique described for business transformation readiness.
• D: A Business Scenario helps identify requirements and stakeholder concerns, but it is not the main technique for assessing organizational readiness.

• ARP poisoning: Redirects or intercepts local network traffic; monitoring would typically show suspicious ARP changes or man-in-the-middle behavior.
• Jamming: Interferes with wireless or radio signals. It would affect connectivity, not usually show a server-specific overload.
• Kerberoasting: Attempts to obtain and crack Kerberos service-account hashes; it does not normally cause a system outage.

• AWS Audit Manager continuously collects evidence from AWS services and helps assess whether workloads comply with regulatory frameworks and internal policies. It can produce audit-ready reports.
• AWS Config records resource configurations and evaluates them against compliance rules. For example, it can check whether encryption, logging, or access settings meet company requirements.

• Amazon Inspector identifies software vulnerabilities and unintended network exposure, not general policy or regulatory compliance.
• Amazon CloudWatch monitors metrics, logs, and operational events, but is not primarily a compliance assessment service.
• AWS CloudTrail records API activity for auditing and investigation. It supports compliance, but does not itself provide the structured compliance assessment capabilities of Audit Manager and Config.

Question 3: AWS Storage Gateway File Gateway

• A: S3 bucket per user — S3 is object storage, not a traditional shared file system; mounting it requires extra tools and is less efficient.
• B: File Gateway — Provides a local file share using standard file protocols while storing files in Amazon S3. This preserves convenient local access and extends storage capacity.
• C: WorkSpaces and WorkDocs — Designed for virtual desktops and document collaboration, not large shared file storage.
• D: EC2 with EBS — EBS is attached to one EC2 instance and is not designed for direct multi-user file sharing.

• Review the risk register.
• Use the previously defined risk response plan, such as assigning a backup resource, reprioritizing work, or using another qualified engineer.
• Implement the response promptly because the task is on the critical path.

• B: Revising the schedule without first applying the planned response may be premature.
• C: Excluding a required task could compromise the project’s objectives and requirements.
• D: Updating the risk and lessons learned records is appropriate, but it should happen after managing the immediate issue, not as the next primary action.

• Looking up accounts, contacts, and opportunities
• Logging calls and updating Salesforce records
• Accessing previously available customer information when temporarily offline

• Salesforce Touch App: Primarily an older tablet-focused experience, not the best general solution for the sales team.
• Custom hybrid app: Unnecessary development when Salesforce provides the required capabilities natively.
• SalesforceA: Intended mainly for Salesforce administrators, not sales representatives.

• 6-phone boxes: 6x
• 8-phone boxes: 8x

1. Ensure BOMs can include subcomponents ? Configure an entity relationship

1. Report changes made by engineers ? Enable auditing

• Configure entity relationship
• Configure auditing

• Uses on-premises data or resources
• Runs components in the cloud
• Can scale across multiple cloud environments when demand increases

• Public cloud: Resources are hosted entirely by a cloud provider.
• Private cloud: Resources are dedicated to one organization, usually in its own environment.
• Hybrid: Combines on-premises and cloud resources.

• Cutover: The old system is replaced immediately. It may be fast, but any failure can cause significant disruption.
• Phased: The system is introduced in stages, which reduces implementation risk but may prolong the transition.
• Pilot: The system is first deployed to a limited group or location. This is useful for testing but does not necessarily minimize downtime for the entire organization.

• Data lakes: scalable, low-cost storage for structured, semi-structured, and unstructured data.
• Data warehouses: reliable SQL analytics, governance, and performance features.

• Data lake: Primarily provides flexible, scalable storage but may lack warehouse-style reliability and governance.
• Data warehouse: Strong for structured analytics but less flexible for raw and unstructured data.
• All of these: The individual lake and warehouse do not, by themselves, unify the siloed architecture.

• Improve QA testing efficiency: A prototype may help discover defects early, but that is not its greatest benefit.
• Decrease time allocated for user testing and review: Prototyping usually requires additional user involvement and review, not less.
• Minimize scope changes: Prototypes can actually reveal new requirements or cause scope changes. However, discovering those changes early is beneficial.

• An Anypoint VPC provides private network connectivity for CloudHub applications.
• An IPsec VPN tunnel or AWS Direct Connect connects that VPC to the customer’s on-premises network without exposing the database to the public internet.
• The VPC and on-premises firewalls must allow the required traffic, routes, and ports.

• Static IP addresses only identify the application’s outbound traffic; they do not create a private network path to the database.
• A Dedicated Load Balancer does not replace the required network connection to the on-premises environment. It is also unnecessary merely to reach individual databases.
• Moving sensitive databases to a DMZ is not the intended architecture and could reduce their protection.

• Disabling GPS: Affects location services, not email connectivity.
• Configuring 4G usage only: Does not enable international data access and could prevent connectivity if 4G is unavailable.
• Connecting using a hotspot: Could provide data, but it is not the most direct solution and depends on another network or device.

• SQL injection (SQLi): Attacks databases by inserting malicious SQL commands.
• Cross-site scripting (XSS): Injects scripts into web pages viewed by other users.
• Sideloading: Installing an application from outside the official app store. It may install unauthorized apps, but it does not generally unlock the operating system or enable restricted system features.

• Use one Azure AD directory for the organization.
• Separate divisions with subscriptions and/or resource groups.
• Assign each division’s administrator appropriate Azure role-based access control (RBAC) permissions, scoped to their subscription or resource group.

• A single Construction Job can use multiple Machinery records.
• A single Machinery record may be used on multiple Construction Jobs.
• This is a many-to-many relationship, which Salesforce models using a junction object.
• The junction object can contain fields such as:

• Master-detail to Machinery
• Master-detail to Construction Job
• Date and cost fields

• nomes de pessoas;
• organizações;
• locais;
• datas;
• números de processos;
• leis ou contratos.

• NER = identifica informações específicas e classificáveis.
• Sumarização = reduz um documento e apresenta seus pontos principais.

• 25 — Traditional SMTP server-to-server delivery; often restricted for client submission and not inherently encrypted.
• 110 — POP3 for retrieving email; unencrypted by default.
• 143 — IMAP for retrieving and synchronizing email; unencrypted by default.
• 587 — Authenticated SMTP submission, commonly secured with STARTTLS.

• A. A virtual network gateway
• D. A virtual network

• Azure virtual machines must be connected to an Azure virtual network (VNet). The VNet provides private IP addressing and network connectivity for the VMs.
• A virtual network gateway enables communication between the Azure VNet and the on-premises network, typically through a site-to-site VPN or ExpressRoute connection.

• Load balancer: Distributes traffic among Azure VMs; it does not connect Azure to an on-premises network.
• Application gateway: Provides web-application load balancing and Layer 7 routing; it is not the normal resource for on-premises connectivity.
• Gateway subnet: A gateway subnet is required inside the VNet when deploying a virtual network gateway, but the question’s intended two primary resources are the VNet and virtual network gateway.

• You normally do not create a new sensitive information type for credit card numbers. Microsoft Purview already provides a built-in Credit Card Number sensitive information type.
• The required sequence should generally be:

• Microsoft 365 groups can contain users, but generally can’t contain other groups as members.
• Security groups can contain users and, where supported, other security groups.
• Distribution groups have different nesting restrictions and aren’t equivalent to security groups.
• Dynamic groups can’t be manually populated with members; their membership is calculated from rules.
• A group’s membership type (Assigned or Dynamic) and group type determine whether it can be added to another group.

• The VPN gateway is in VirtualNetworkA.
• Gateway transit is configured on the peering associated with the VNet that contains the gateway—here, VirtualNetworkA.
• A peered VNet may use the remote gateway through the appropriate peering option, but this does not automatically update an existing P2S client’s routes.
• The Windows 10 workstation’s P2S VPN client package was created before VirtualNetworkB was peered, so it may not have a route for VirtualNetworkB.

• Users retain their existing usernames and passwords.
• Existing accounts can be used to access Azure-based resources.
• Administrators avoid manually recreating thousands of accounts.
• The transition is less disruptive before the on-premises data center is retired.

• Drop violating frames
• Log or alert on the violation
• Shut down or restrict the port

• Load balancer: Distributes application traffic; it does not control switch MAC learning.
• IPS: May detect some network attacks but is not the primary control for switch MAC-table exhaustion.
• NGFW: Protects traffic crossing network boundaries, while MAC flooding occurs at the switching/LAN layer.

• Primary and core nodes: Use On-Demand Instances because the workload is business-critical. These nodes manage the cluster and store/process HDFS data.
• Task nodes: Use Spot Instances in an instance fleet. Task nodes are suitable for interruption because they do not hold essential cluster data and can be replaced or diversified across instance types.
• Terminate the entire cluster after processing: The job runs only about six hours each morning, and EMRFS stores data in Amazon S3. Keeping the cluster running for the rest of the day would waste money.

• A: Using Spot for primary and core nodes risks interruption of the critical cluster.
• C: All On-Demand is reliable but unnecessarily expensive; terminating the cluster helps, but Spot task nodes provide greater savings.
• D: Leaving primary and core nodes running after the task finishes continues to incur costs. Savings Plans also are less appropriate for this intermittent workload.