Which settings are required on ArubaOS switches for Aruba AirWave to discover, monitor, and
A. credentials for Telnet or SSH login and an HTTPS certificate
B. SNMP v2 community or v3 user and an HTTPS certificate
C. credentials for Telnet or SSH login and an SNMP v2 community or v3 user
D. shared cluster key and an SNMP v2 community or v3 user
What is one requirement to combine Aruba 5400R zl2 Series switches in a Virtual Switching
Framework (VSF) fabric?
A. One of the switches must be an Aruba 5412R switch, white the other member can be any
switch in the 5400R series.
B. Both of the members must have two management modules.
C. The switches must operate in v3-modute only mode: any modules of an earlier version are
D. The interfaces assigned to the VSF link must be pre-configured as part of a link aggregation.
Currently the routing switches shown in the exhibit have only connected IP routes. The network
administrator needs to add static routes to support communications between subnet 10.1.4.0/24
and subnet 10.1.8.0/24. Which switch or switches require a static route to 10.1.8.0/24?
A. Switch-3 only
B. Switch-1 and Switch-3
C. Switch-1 only
D. Switch-1 and Switch-2
An ArubaOS switch operates at factory defaults and has a reachable IP address. How can
network administrators access the switch CLI ?
A. from the console port with the default username and password, but not from Telnet at al
B. from the console port without authentication, but not from Telnet at all
C. from the console port without authentication or from Telnet without authentication
D. from the console port without authentication or from Telnet with the default username and