support@Free-Braindumps.com
Register Login
Cisco
CompTIA
ISC
EC-Council
EXIN
Fortinet
ITIL
Juniper
Microsoft
VMware
Avaya
SAP
Google
NVIDIA
Salesforce
Amazon
Palo Alto Networks
ISC2
CrowdStrike
Anthropic
All Vendors
  1. Home
  2. Exams
  3. Huawei
  4. H12-322

Free H12-322 Exam Braindumps
Huawei Certified ICT Professional - Wireless Local Area Network- Planning and Optimizing Enterprise WLAN Questions 106–110 (page: 23)

Updated On: 10-Feb-2026
Page 23 of 58
PDF with 282 Questions

The following description of the role of the coupler is wrong?

  1. Combine multiple input signals into one output, and then split the mixed signal in the opposite direction.
  2. Average one signal into multiple outputs
  3. Take the required signal energy from the main line to the near-end antenna and allocate more signal energy to the far-end antenna
  4. Connect the RF port of the AP to the antenna interface.

Answer(s): A,B,D



WLAN surveyors can add Pins to locations where special information needs to be recorded during the WLAN Survey Pad survey.
Needle and Pin annotation support five functions: record, photo, text record, voice record and delete mark.

  1. True
  2. False

Answer(s): A



Seeking to use the open standard IGP protocol and supporting the partitioning function. Which of the following protocols is most preferred?

  1. RIP
  2. OSPF
  3. EIGRP
  4. BGP

Answer(s): B



Which of the following scenarios is suitable for using the board AC as a wireless controller?

  1. Overlay wireless network construction scenario based on existing cable bearer network
  2. Unified construction and unified transformation of wired and wireless networks
  3. Unified management of wired and wireless users
  4. Scenes for independent management of wired and wireless services

Answer(s): B,C



The outdoor bridge backhaul needs to focus on confirming the installation of the AP at the node and paying attention to the transmission path between the nodes.
What is the correct statement about leaf nodes, aggregation nodes, and transmission paths?

  1. If the leaf node needs to be used for coverage, it is necessary to pay attention to the outdoor coverage of the survey.
  2. If there are multiple aggregation points, you need to confirm the location of each aggregation point. Each aggregation point also needs to confirm the AP installation location and power supply mode.
  3. There should be no obstructions or distances between the convergence points and leaf nodes. There are allowed between the relay nodes and the convergence points, relay nodes and leaf points. Obstacle obstruction
  4. The transmission path is the path between the stations. In the site survey, it is necessary to confirm the distance between the connected nodes. The PMP mode needs to confirm the most between the links. large angle

Answer(s): A,B,D



  PDF
Viewing page 23 of 58
Viewing questions 111 - 115 out of 282 questions


Post your Comments and Discuss Huawei H12-322 exam prep with other Community members:

AI Tutor AI Tutor 👋 I’m here to help!